Gebruiksaanwijzing /service van het product FX35 (2013) van de fabrikant Infiniti
Ga naar pagina of 522
2013 Infiniti FX Owner’s M anual Printing: June 2012 (12) / OM3E 0S51U0 / Printed in U.S.A. For y our safety , re ad car efully and keep in thi s vehic le.
GUID-2A3E000D-12ED -4DE3-A59 6-A8B7048A6C6C Y our INFINITI represents a new way of thinking about vehicle design. It integrates advanced engineering and superior crafts- manship with a simple, refined aesthetic sensitivity associated with traditional Ja- panese culture.
. AL WAYS provide information about the proper use of vehicle safety features to all occupants of the vehicle. . AL WAYS r eview this Owner ’ s Manual for important safety information.
SIC0697 If you see the symbol above, it means “ Do not do this ” or “ Do not let this happen ” . NOS1274 If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle. NOS1275 Arrows in an illustration that are similar to those above indicate movement or action.
INFINITI CUSTOMER CARE PROGRAM GUID-393471D7-DDC7-432D-AF4 7-304A23653BB2 INFINITI CARES ... Both INFINITI and your INFINITI retailer are dedicated to serving all your automotive needs. Y our sati sfaction with your vehicle and your INFINITI retailer are our primary conc erns.
Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and c ontrols Pre-driving c hec ks and adjustments Monitor, climate, audio, phone and voic .
.
0 Illustrat ed table of c ontents Seats, seat belts and supplemental restraint system (SRS) ... ....................................................... 0-2 Exterior front ... ....................................................... 0-3 Exterior rear ..
0-2 Illustrated table of contents GUID-794FCEB3-93FF-4004-9F 1C-E3D1BA4A5BDF JVC0316X 1. Child restraint anc hor points (for top tether strap child restraint) (Page 1- 23, P .1-34) 2. Seat belts (P .1-11) 3. Front-seat Active Head Restraint (P .1-6) 4.
GUID-3F190944-B4F9-4F55-848C-0 ACF5C43E6FF JVC0317X 1. Hood (P .3-18) 2. Headlight and turn signal (P .2-37) — Bulb replacement (P .8-29) — Adaptive Front lighting System (AFS) (if so equipped) (P .2-41) 3. Windshield wiper and washer (P .2-33) — Maintenance (P .
0-4 Illustrated table of contents GUID-97B05AAC-BA66-4C07-A53 2-03341EAF4772 SSI0446 1. Rear view camera (P .4-24, P .4-31) 2. Lift gate (P .3-18) — Intelligent Key system (P .3-6) — Remote keyless entry system (P .3-14) 3. Rear window defroster (P .
GUID-194C4A6B-A471-4092-BE DF-EF4C2DBD74AF JVC0315X 1. Coat hooks (P .2-54) 2. Rear personal light (P .2-64) 3. Power window controls (P .2-59) 4. Automatic drive positioner switch (if so equipped) (P .3- 32) 5. Sun visors (P .3-28) 6. Moonroof switch (P .
0-6 Illustrated table of contents GUID-D9E4FAA2-776C-401D-BFFC-C90DAAA337 CA SIC4246 1. Outside mirror remote cont rol switch (P .3-30) 2. Intelligent Brake Assist (IBA) off switch (if so equipped) (P .2-48) 3. Instrument brightness cont rol switch (P .
10. Vehicle Dynamic C ontrol (VDC) OFF switch (P . 5-83) 11. Intelligent Key port (P .5-13) 12. Power lift gate switc h (P .3-18) 13. Power lift gate main switc h (P .3-18) 14. TRIP/RESET switch for twin trip od- ometer (P .2-7) 15. Electric tilting/telescopic steering wheel lever (if so equipped) (P .
0-8 Illustrated table of contents GUID-64430E38-4D64-4 1A9-9A8D-212C3600A5A4 JVC0209X 1. Side ventilator (P .4-48) 2. Paddle shifter (if so equipped) (P .5-17) 3. Meters and gauges (P .2-6) 4. Center ventilator (P .4-48) 5. Center multi-function control panel — Navigation system* (if so equipped) — V ehicle information and setting buttons (P .
GUID-E66B4AB4-D34D-4D06-BE FF-25AE613A9BDC SIC3825 1. T achometer (P .2-7) 2. Warning/Indic ator lights (P .2-12) 3. Speedometer (P .2-6) 4. Engine coolant temperature gauge (P .2-8) 5. Dot matrix liquid crystal display/ Odometer/twin trip odometer (P .
0-10 Illustrated table of contents GUID-0E9F7C61-12C7-4359-B3 A7-F2B6A5B2D72A SDI2262 VQ37VHR ENGINE GUID-E1D33D79-85C2-48D3-81C3 -5821CAFCD554 1. Fuse/fusible link holder (P .8-25) 2. Battery (P .8-17) 3. Radiator filler cap (P .8-9) 4. Engine oil dipstic k (P .
SDI2264 VK50VE ENGINE GUID-B346F336-F455-4747-A BBD-D987DA3CB446 1. Fuse/fusible link holder (P .8-25) 2. Battery (P .8-17) 3. Engine oil filler c ap (P .8-11) 4. Radiator filler cap (P .8-9) 5. Engine oil dipstic k (P .8-11) 6. Brake fluid reservoir (P .
0-12 Illustrated table of contents GUID-B9B205DD-BA4F-46E1-BD B8-CF9F6E9167BE Warning light Name Page All-Wheel Drive (AWD) warning light (AWD models)* 2-13 Anti-lock Braking System (ABS) warning ligh.
1 Safety — Seats, seat belts and supplemental restraint syst em Seats ... ................................................................... 1-2 Front seats ... ...................................................... 1-3 Rear seats ... .............
1-2 Safety — Seats, seat belts and supplement al restr aint syst em GUID-9CBF711E-59D2-407E-A 401-0C8522180508 SSS0133 WARNING . Do not ride in a moving vehicle when the seatback is r eclined. This can be danger- ous. The shoulder belt will not be against your body .
FRONT SEA TS GUID-678B214B-76A0-4F26-9669 -C3D23626B7A7 Front power seat adjustment GUID-B3E66E69-74EF-4 9BA-B3BC-0 170A0521FE7 Operating tips: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 . The power seat motor has an auto-reset overload protection circuit.
1-4 Safety — Seats, seat belts and supplemental restraint syst em SSS1052 Seat lifter: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Push the front or rear end of the switch up or down to adjust the angle or height of the seat.
SSS0893 Thigh extension (if so equipped): GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 The front portion of the front seats can be extended forward for seating comfort. Pull up and hold the lever * 1 to extend the front portion to the desired position. REAR SEA TS GUID-E9A94074-F1D8- 46EB-848A-2D085AB19299 WARNING .
1-6 Safety — Seats, seat belts and supplemental restraint syst em WARNING . Do not ride in a moving vehicle when the seatback is r eclined. This can be danger- ous. The shoulder belt will not be against your body . In an ac cident, y ou could be thrown into it and r eceive neck or other serious injuries.
JVR0051X The illustration shows the seating posi- tions equipped with head restraints and headrest. The head restraints are adjusta- ble. Indicates the seating position is equipped with a head restraint. + indicates the seating position is equipped with a headrest.
1-8 Safety — Seats, seat belts and supplemental restraint syst em SSS0993 T o raise the head restraint, pull it up. SSS0994 T o lower, push and hold the loc k knob and push the head restraint down. SSS0995 Removal GUID-B30C0D05-F799- 4C44-9CF0-9C9E2A7ADD31 Use the following procedure to remove the adjustable head restraints.
seating position. SSS0996 Install GUID-2CB87255-008D-4C17-800 7-A2FE6393CF70 1. Align the head restraint stalks with the holes in the seat. Make sure that the head restraint is facing the correct direction. The stalk with the adjustment notches * 1 must be installed in the hole with the loc k knob * 2 .
1-10 Safety — Seats, seat belts and supplemental restraint syst em certain rear-end collisions. After the co lli- sion, the head restraints return to their original position. Adjust the Active Head Restraints properly as described earlier in this section.
GUID-93F549EC-455F- 4396-93E6 -EF14CE69CD19 PRECAUTIONS ON SEA T BEL T USAGE GUID-1DE9A315-F8DA- 49DB-BCFE-8A2E0B64BF49 If you are wearing your seat belt properly adjusted, and you are sitting upright.
1-12 Safety — Seats, seat belts and supplemental restraint syst em WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a c hild restraint.
SSS0016 SSS0014 PREGNANT WOMEN GUID-D69B412B-40FA-43AC-A545-A3C5EF5BE114 INFINITI recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist, and place the shoulder belt over your shoulder and across your chest.
1-14 Safety — Seats, seat belts and supplemental restraint syst em tened, it may indicate the pre-crash seat belt system has a malfunction. Have your INFINITI retailer chec k and repair the system. When the seat belt is retracted repeatedly in a short period of time, the motor may not be able to retract the seat belt.
Then smoothly pull the belt out of the retractor . SSS0290 3. Position the lap belt portion low and snug on the hips as shown. 4. Pull the shoulder belt portion toward the retractor to take up extra slac k. Be sure the shoulder belt is routed over your shoulder and across your chest.
1-16 Safety — Seats, seat belts and supplemental restraint syst em SSS0326 Unfastening the seat belts GUID-9AD4A09B-1DA1-410A-88F 0-CD89BE9FE3DC T o unfasten the seat belt, push the button on the buckle.
WARNING . After adjustment, release the adjustment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position.
1-18 Safety — Seats, seat belts and supplemental restraint syst em until they are co mpletely dry. . If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dr y cloth.
children. See “ Child restraints ” (P .1-20). A child restraint may be secured in the vehicle by using either the LA TCH (Lower Anchor and T ethers for CHildren) system or with the vehicle seat belt. See “ Child restraints ” (P .1-20) for more information.
1-20 Safety — Seats, seat belts and supplemental restraint system WARNING Never let a c hild stand or kneel on any seat and do not allow a child in the cargo area.
ward-facing child restraint installa- tion using the seat belts ” (P .1-30). — Even with the INFINITI Advanced Air Bag System, never install a rear- facing child restraint in the front seat. An inflating air bag could seriously injure or kill a child.
1-22 Safety — Seats, seat belts and supplemental restraint system SSS0904 LA TCH syst em lower anc hor locations Lower Anc hors and T ethers for CHildren (LA TCH) SYST EM GUID-F386DD2F-53B1-4667-A D.
SSS0643 LA TCH webbing-mount ed attac hment Installing c hild restraint LA TCH lower anc hor attac hments GUID-93E34B42-CCE2 -45A9-88 4B-299A11E654E9 LA TCH compa tible c hild restraints include two rigid or webbing-mounted attac hments that can be connected to two anchors located at certain seating positions in your vehicle.
1-24 Safety — Seats, seat belts and supplemental restraint system strap is damaged. . Do not allow cargo to contact the top tether strap when it is attached to the top tet her anc hor. Properly secure the cargo so it does not contact the top tether strap.
SSS0649 Rear-facing rigid-mount ed — step 2 SSS0639 Rear-facing — ste p 3 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slac k from the anchor attachments.
1-26 Safety — Seats, seat belts and supplemental restraint system applicable). Not all child restraints fit in all types of vehicles. 5. Check to make sure the child restraint is properly secured prior to each use. If the c hild restraint is loose, repeat steps 1 through 4.
SSS0654 Rear-facing — ste p 2 2. Route the seat belt tongue through the child restraint and insert it into the buck le until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer ’ s instructions for belt routing. SSS0655 Rear-facing — ste p 3 3.
1-28 Safety — Seats, seat belts and supplemental restraint system SSS0657 Rear-facing — ste p 5 5. Remove any additional slack from the seat belt; press downward and rear- ward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt.
SSS0645 Forward-f acing web-mounted — step 2 2. Secure the child restraint anc hor at- tachments to the LA TCH lower anc hors. Check to make sure the LA TCH attach- ment is properly attached to the lower anchors.
1-30 Safety — Seats, seat belts and supplemental restraint system SSS0647 Forward-f acing — step 4 4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slac k from the anchor attachments.
SSS0640 Forward-f acing (front passenger seat) — step 1 Refer to all Warnings and Cautions in the “ Child s afety ” and “ Child restraints ” sec- tions before installing a child restraint. Follow these steps to install a forward- facing c hild restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1.
1-32 Safety — Seats, seat belts and supplemental restraint system SSS0651 Forward-f acing — step 4 4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Lock - ing Retractor (ALR) mode (c hild restraint mode).
SSS0641 Forward-f acing — step 8 8. After attaching the c hild restraint, test it before you place the c hild in it. Push it from side to side while holding the child restraint near the seat belt path. The c hild restraint should not move more than 1 inch (25 mm), from side to side.
1-34 Safety — Seats, seat belts and supplemental restraint system SSS0902 INST ALLING TOP TETHER STRAP GUID-2403892C-4B94-42B8-B 13F-1D91A155DD29 First, secure the child restraint with the LA TCH lower anc hors (rear outboard seat- ing positions only) or the seat belt, as applicable.
LRS0453 . Check the booster seat in your vehicle to be sure it is compatible with the vehicle ’ s seat and seat belt system. . Make sure the child ’ s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the ce nter of the c hild ’ s ears.
1-36 Safety — Seats, seat belts and supplemental restraint system SSS0640 1. If you must install a booster seat in the front seat, move the seat to the rear- most position. 2. Position the booster seat on the seat. Only place it in a forward-facing direc- tion.
SSS0676 7. If the booster seat is installed in the front passenger seat, push the ignition switch to the ON position. The front passenger air bag status light may or may not illuminate depending on the size of the c hild and the type of booster seat used.
1-38 Safety — Seats, seat belts and supplemental restraint system 7 seconds if the systems are operational. SSS0131 SSS0132.
WARNING . The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity frontal collision. Always wear your seat belts to help re duce the risk or severity of injury in various kinds of accidents.
1-40 Safety — Seats, seat belts and supplemental restraint syst em SSS0008 SSS0009 SSS0099 SSS0100 WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations.
SSS0832 SSS0833 SSS0140 SSS0162 SSS0159 WARNING Front seat-mounted side-impact supplemen- tal air bags and roof-mounted curtain side- impact and rollover supplemental air bags: . The side air bags and curtain and rollover air bags ordinarily will not inflate in the event of a frontal impact, rear impact or lower severity side colli- sion.
1-42 Safety — Seats, seat belts and supplemental restraint syst em curtain and rollover air bags are most effective when you are sitting well back and upright in the seat. The side air bags and curtain and rollover air bags inflate with great force.
SSS0903 1. Crash zone sensor 2. Supplemental front-impact air bag modules 3. Front seat-mounted side-impact sup- plemental air bag modules 4. Occupant classification sensors (weight sensors) 5. Occupant detection system control unit 6. Roof-mounted curtain side-impact and rollover supplemental air bags 7.
1-44 Safety — Seats, seat belts and supplemental restraint syst em . Until you have confirmed with your retailer that your passenger seat ad- vanced air bag is working properly, position the occupants in the rear seating positions. This vehicle is equipped with the INFINITI Advanced Air Bag System for the driver and front passenger seats.
close to, or is against, the air bag module during inflation. The front air bags deflate quic kly after a collision. The front air bags operate only when the ignition switch is in the ON position. After pushing the ignition switch to the ON position, the supplemental air bag warn- ing light illuminates.
1-46 Safety — Seats, seat belts and supplemental restraint syst em Front passenger air bag: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 The front passenger air bag is designed to automatically turn OFF when the vehicle is operated under some conditions as de- scribed below as permitted by U.
may or may not be illuminated, depending on the siz e of the c hild and the type of child restraint being used. If the passenger air bag status light is not illuminated (indicating that the air bag might inflate in a crash), it could be that the c hild restraint or seat belt is not being used properly.
1-48 Safety — Seats, seat belts and supplemental restraint syst em material around the air bag system. . Removing or modifying the front pas- senger seat may affect the function of the air bag system and result in serious personal injury. . Modifying or tampering with the front passenger seat may result in serious personal injur y.
The side air bags and curtain and rollover air bags are designed to inflate in higher severity side collisions, although they may inflate if the forces in another type of collision are similar to those of a higher severity side impact. They are designed to inflate on the side where the vehicle is impacted.
1-50 Safety — Seats, seat belts and supplemental restraint syst em . Do not make unauthorized c hanges to your vehicle ’ s electric al system, suspen- sion system or side panel. This could affect proper operation of the side air bag and curtain and rollover air bag systems.
ing co ndition should get fresh air promptly. After pretensioner activation, load limiters allow the seat belt to release webbing (if necessary) to reduc e forces against the chest. The supplemental air bag warning light is used to indicate malfunctions in the pretensioner system.
1-52 Safety — Seats, seat belts and supplemental restraint syst em rollover air bag and pretensioner systems need servicing: . The supplemental air bag warning light remains on approximately 7 seconds after the ignition switch is pushed to the ON position.
2 Instruments and c ontrols Coc kpit ... ................................................................ 2-3 Instrument panel ... ................................................. 2-5 Meters and gauges ... ............................................
Storage ... ............................................................. 2-50 Cup holders ... .................................................. 2-50 Sunglasses holder ... ......................................... 2-51 Glove box ... .................
GUID-786704CA-5415-49E0-B0 51-5131386B6540 SIC4246 1. Outside mirror remote cont rol switch 2. Intelligent Brake Assist (IBA) off switch (if so equipped) 3.
2-4 Instruments and contr ols wheel lever (if so equipped) 16. Manual tilting/telescopic steering wheel lever (if so equipped) 17. Center-console-mounted co ntrols — Clim ate controlled seat switc h.
GUID-7F14A382-7F82-4651-B DC7-0E12FD740023 JVC0209X 1. Side ventilator 2. Paddle shifter (if so equipped) 3. Meters and gauges 4. Center ventilator 5. Center multi-function control panel — Navigation system* (if so equipped) — V ehicle information and setting buttons — Around View Monitor (if so equipped) 6.
2-6 Instruments and contr ols GUID-94EC96EF-E97F-4 313-B5C0-FA082DDC3327 SIC3825 1. T achometer 2. Warning/Indic ator lights 3. Speedometer 4. Engine coolant temperature gauge 5.
SIC3259 Odometer/twin trip odomet er Odometer/twin trip odometer GUID-4A477AE0-6265-4F69-A5B D-53A4E6F878EF The odometer * 1 and twin trip odometer * 2 are displayed on the dot matrix crystal display when the ignition switch is in the ON position. The odometer records the total distance the vehicle has been driven.
2-8 Instruments and contr ols SIC3255 ENGINE COOLANT TEMPERA TURE GAUGE GUID-C761695C-D4AC-44B4-B7 FE-BE6005727882 The gauge indic ates the engine co olant temperature. The engine coo lant temperature is within the normal range when the gauge needle points within the zone * 1 shown in the illustration.
as soon as it is convenient, preferably before the gauge reaches “ E ” . There will be a small reserve of fuel in the tank when the fuel gauge needle reac hes “ E ” . The indicates that the fuel-filler door is located on the passenger ’ s side of the vehicle.
2-10 Instruments and controls km/h). You can also calibrate the co mpass by driving your vehicle on your everyday route. The compa ss will be calibrated once it has trac ked 3 compl ete circles. T o turn on and off the compass manually, push the switch * A while the ignition switch is in the ON position.
ZONE VARIA TION CHANGE PROCE- DURE GUID-0746FCA1-9280-483C-9034 -D395D046BED8 The difference between magnetic north and geographical north is known as variance. In some areas, this differenc e can some- times be great enough to cause false compass readings.
2-12 Instruments and controls GUID-3B7E2B79-E712-41D2-9 76D-4E1B161E68FC All-Wheel Drive (AWD) warning light (AWD models)* Lane departure warning light (orange)* Front passenger air bag status light A.
WARNING LIGHTS GUID-CA89913F-D836-4B7B-A 2FB-404499D455FD All-Wheel Drive (AWD) warning light (AWD models) GUID-34B5C08F-9F8A-4 1FB-8888-5AD A4E0614B0 The warning light comes on when the ignition switc h is pushed to ON. It turns off soon after the engine is started.
2-14 Instruments and controls fluid is necessary , add fluid and have the system chec ked by your INFINITI retailer. (See “ Brake fluid ” (P .8-16).) 2. If the brake fluid level is correc t, have the warning system checked by an INFINITI retailer.
“ Engine oil ” (P .8-11).) CAUTION Running the engine with the engine oil pressure warning light on could cause serious damage to the engine almost immediately. Such damage is not co vered by warranty . T urn off the engine as soon as it is safe to do so.
2-16 Instruments and controls SURE information will be displayed. The tire pressure for eac h tire will also be displayed. When the low tire pressure warning light illuminates, you should stop and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label.
CAUTION . The TPMS is not a substitute for the regular tire pr essure chec k. Be sure to chec k the tire pressure regularly . . If the vehicle is being driven at speeds of less than 16 MPH (25 km/h), the TPMS may not operate co rrectly . . Be sure to install the specified size of tires to the four wheels correctly.
2-18 Instruments and controls bag warning light will turn off after about 7 seconds if the front-impact air bag and side air bag, curtain air bag systems and/ or pretensioner seat belt are operational.
further details. Exterior light indicator GUID-3005C741-A5D2-4EF8-A4 22-AD79F2FE5467 This indicator illuminates when the head- light switch is turned to the AUTO, or position and the front parking lights, instrument panel lights, tail lights, lice nse plate lights or headlights are on.
2-20 Instruments and contr ols After a few driving trips, the light should turn off if no other potential emission control system malfunction ex- ists.
are not operating. AUDIBLE REMINDERS GUID-C0FA3258-142A-4A63-A081-BEA4082 ED041 Key reminder c hime GUID-7EAF972B-8A0 1-4D33-A849-1927616D3747 A c hime will sound if the driver side door is opened whi.
2-22 Instruments and contr ols — “ Driving the vehicle ” (P .5-15). . Intelligent Cruise C ontrol (IC C) system — “ Intelligent Cr uise Control (IC C) sys- tem (FULL SPEED RANGE) ” (P .5-32). . Distance C ontrol Assist (DCA) system — “ Distance Control Assist (DCA) sys- tem ” (P .
JVI0339X Instruments and contr ols 2-23.
2-24 Instruments and contr ols INDICA TORS FOR OPERA TION GUID-B3F3B2EB-3CA7-4B5 3-8052-3948B1F3352B 1. Engine start operation indicator GUID-EB500815-1102-428E-9A0D- 6F81FA5B2E69 This indicator appears when the selector lever is in the P (Park) position.
9. Low fuel warning GUID-EA8889A1-61F8-403A- A526-34488D0E5188 This warning appears when the fuel level in the tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches the empty (E) position. There is a small reserve of fuel remaining in the tank when the fuel gauge reac hes the empty (E) position.
2-26 Instruments and contr ols played while the vehicle is cont rolled by the conventional (fixed speed) cruise con- trol mode of the ICC system. (See “ Intelli- gent Cruise Control (IC C) system (FULL SPEED RANGE) ” (P .
road conditions affect tire wear and when tires should be replaced. Setting the tire replacement indicator for a certain driving distance does not mean your tires will last that long. Use the tire re placement indicator as a guide only and always perform regular tire chec ks.
2-28 Instruments and contr ols SIC3829 TRIP C OMPUTER GUID-F2A963CC-4D03-48BE-A02 E-25C9710C30F3 Switches for the trip computer are located on the right side of the combination meter panel. T o operate the trip co mputer , push the switches as shown above.
actual fuel consumption. The display is updated every 30 seconds. The dte mode includes a low range warning feature. If the fuel level is low, the warning is displayed on the screen. When the fuel level drops even lower, the dte display will c hange to “——” .
2-30 Instruments and contr ols . BACK Select this submenu to return to the top page of the setting mode. . LANGUAGE Select this submenu to choose lan- guage for display .
SIC2045 How to arm the vehicle security system GUID-CE21FC3E-1F08-4715-8A70 -0B5193589812 1. Close all windows. The syst em can be armed even if the windows are open. 2. Push the ignition switc h to the OFF position. 3. Remove the Intelligent Key from the vehicle.
2-32 Instruments and contr ols INFINITI VEHICLE IMMOBILIZER SYSTEM GUID-6E3959C6-6FF5-4CA8-81AC- A7E8C959A5CE The INFINITI V ehicle Immobilizer System will not allow the engine to start without the use of the registered Intelligent Ke y . Never leave these keys in the vehicle.
If the light still remains on and/or the engine will not start, see an INFINITI retailer for INFINITI Vehicle Immobilizer System service as soon as possible. Please bring all Int elligent Keys that yo u have when visiting an INFINITI retailer for service.
2-34 Instruments and contr ols SIC3626 T ype A SIC4492 T ype B WINDSHIELD WIPER AND WASHER OPERA TION GUID-1CFF399F-D2ED-4A98-81 71-56A0C8B75D99 The windshield wiper and washer operates when the ignition switc h is in the ON position.
SIC4258 RAIN- SENSING AUTO WIPER SYS- TEM (if so equipped) GUID-FD5F0307-6E94-49F6-969F -C30BB968717F The rain-sensing auto wiper system can automatically turn on the wipers and adjust the wiper speed depending on the rainfall and the vehicle speed by using the rain sensor located on the upper part of the windshield.
2-36 Instruments and contr ols SIC3627 T ype A SIC4259 T ype B REAR WINDOW WIPER AND WASHER OPERA TION GUID-330441CC-6FC B-4178-A695-A658CFAFD0F9 If the rear window wiper operation is interrupted by snow etc., the wiper may stop moving to protect its motor.
GUID-AAE3047B-0510-4 871-B95C- 8E645802C232 XENON HEADLIGHTS GUID-2C34F8A3-9AD6-4 D30-991D-BEF 904D3F050 WARNING HIGH VOL TAGE . When xenon headlights are on, they produce a high voltage. T o prevent an electric shoc k, never attempt to modify or disassemble.
2-38 Instruments and contr ols SIC3268 Autolight system GUID-2ED3057E-F02A-4E5A-945 6-69FF03ABE35C The autolight system allows the headlights to be set so they turn on and off automatically . T o set the autolight system: 1. Make sure the headlight switc h is in the AUTO position * 1 .
For automatic headlights off delay setting, see “ Comfort settings ” (P .4-20). SIC3269 Headlight beam select GUID-0984DF8F-E44E-4829-A38E-A 0F35820F936 * 1 T o select the low beam, put the lever in the neutral position as shown. * 2 T o select the high beam, push the lever forward while the switch is in the position.
2-40 Instruments and controls . Never leave the light switch on when the engine is not running for extended periods of time even if the headlights turn off automatically .
running lights illuminate once the parking brake is released. The daytime running lights will remain on until the ignition switch is pushed to the OFF position. WARNING When the daytime running light system is active, tail lights on your vehicle are not on.
2-42 Instruments and controls SIC3830 Instrument brightness control GUID-DA7D700A-637F-42B7-B02 9-11B5F4818252 The instrument brightness cont rol switch can be operated when the ignition switc h is in the ON position. When the switch is operated, the dot matrix liquid crystal display switches to the brightness adjust- ment mode.
SIC3272 FOG LIGHT SWITCH GUID-7C40B8ED-E7B4-4FFF-853 D-2184E65B51DC T o turn the fog lights on, turn the headlight switch to the position, then turn the switch to the position. To turn them off, turn the switc h to the OFF position. The headlights must be on for the fog lights to operate.
2-44 Instruments and controls . Any liquid spilled on the heated seat should be removed immediately with a dry cloth. . When cleaning the seat, never use gasoline, thinner, or any similar materi- als. . If any malfunctions are found or the heated seat does not operate, turn the switch off and have the system c heck ed by an INFINITI retailer .
GUID-BD684AC9-DBD2-48B2-9F 6C-A381DF2E81D5 SSS0905 The climate co ntrolled seat warms up or cools down the front seats by blowing warm or cool air from the surf ace of the seat. The switc hes located on the center console can be operated independently of each other .
2-46 Instruments and controls turn the switc h off and have the system chec ked by an INFINITI retailer. GUID-69520B0F-8E6D-49B3-BB99-A8 A7C9D2E6D9 SSD1156 The warning systems switch will turn on and off the Lane Departure Warning (LDW) system and the Forward Collision Warning (FCW) system at the same time.
GUID-B4FC340E-572F-4017-AB0F -18864F086100 SIC3602 For driving or starti ng the vehicle on snowy roads or slippery areas, turn on the SNOW mode switch. The indic ator light * 1 on the switch will illuminate. When the SNOW mode is activated, engine output is con- trolled to avoid wheel spin.
2-48 Instruments and controls GUID-737068A6-79F1- 4242-A5D8-DD8B33CBC7DE SIC3844 The vehicle should be driven with the Intelligent Brake Assist (IBA) system on for most driving co nditions.
GUID-BB3EAA65-63CC-4F32-9A1D -5C8D3DCEDC45 SIC3325 If the power supply is disc onnected, the clock will not indicate the correct time. Readjust the time. ADJUSTING THE TIME GUID-74DEF1C7-F832-4803-93 12-6291A6683AFA 1. To set the clock forward, push the button * 1 .
2-50 Instruments and controls The power outlet is used for powering electrical accessories such as cellular telephones. CAUTION . The outlet and plug may be hot during or immediately after use. . Do not use with accessories that exceed a 12 volt, 120W (10A) power draw.
SIC3118 Front T o open the cup holder, push the lid * 1 . The flap will be folded down when insert- ing a large container . T o close, lower the cup holder lid and push it down lightly . T o clean the front cup holder, pull up the inside tray * 2 and remove it.
2-52 Instruments and controls . Do not leave glasses in the sunglasses holder while parking in direct sunlight. The heat may damage the glasses. SIC3838 GL OVE BOX GUID-E830851B-9B72 -4851-862 E-E49D0F8A1F76 WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.
SIC3839 Front C ONSOLE BOX GUID-2C46B8EF-112D-4 A24-8DD9-A 5076B9AE729 Front GUID-7C361A46-BF70-4DB1-BF9 F-5A133A5A63E6 When the lever * A (front passenger ’ s seat side) is pulled, the upper case is available for storing some small items.
2-54 Instruments and controls SIC3663 CARD HOLDER GUID-97E6647C-8807-49DC-AE4 0-3C99461021B5 Pull the sun visor down * 1 and slide a card in the card holder * A . SIC3248 C OA T HOOKS GUID-025674FB-C7C6 -4974-9A2C-ACBAA5885EC5 The coat hooks are equipped beside the rear personal lights.
CAUTION Do not apply a total load of more than 22 lb (10 kg) to a single hook. SIC3850 CARGO NET (if so equipped) GUID-8A451884-6108-427F-B920 -2C513E2E942C The cargo net helps keep packages in the cargo area from moving around while your vehicle is driven.
2-56 Instruments and controls SIC3841 CARGO C OVER (if so equipped) GUID-3D58369F-979 4-4024-BE01-0266F164705F The cargo cover keeps the contents in the cargo area hidden from the outside. T o use the cargo cover, unfold the flap as illustrated. SIC3842 T o remove the carg o cover, 1.
SIC3865 The rear cargo co ver * 1 can be removed from the lift gate. T o remove the rear car go co ver, open the lift gate then remove the clips * 2 with a suitable tool. WARNING . Never put anything on the car go cover, no matter how small. Any object on it could cause an injury in an accident or sudden stop.
2-58 Instruments and controls SIC3845 ROOF RACK (if so equipped) GUID-68C936C7-4F37-45FB-BD6 9-9A545EE27DEA Always distribute the luggage evenly on the roof rack. Do not load more than 99 lb (45 kg) on the roof rails. Observe the maximum load limit shown on the cross- bars or roof carriers when you attac h them on the roof rails.
GUID-F2B513F0-C5CA-46 02-990F-E B320D693D5A POWER WINDOWS GUID-6BC632B6-9662-4 E86-B386- 6BD43E9ADE31 WARNING . Make sur e that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the win- dows. Use the window lock switch to prevent unexpected use of the power windows.
2-60 Instruments and controls SIC3241 Passenger side power window switch GUID-B51E7521-24F7-4258-90F 3-91DEADADEE74 The passenger side switch will open or close only the corresponding window . T o open or close the window, push down or pull up the switc h and hold it.
If the windows do not close auto- matically GUID-BEB4F124-A4F8-4D29-BA B0-A1F127A5F338 If the power window automatic function (closing only) does not operate properly, perform the following proc edure to initi- alize the power window system. 1. Push the ignition switch to the ON position.
2-62 Instruments and controls SIC3243 Sunshade GUID-654A9C45-DBB8-4D8E-877C -EE7D24836BA2 The sunshade will open automatically when the moonroof is opened.
GUID-6FD80748-9586-4C48-AB1E -B9A2EC82667D SIC3642 T o activate or deactivate the welcome light function, perform the following procedure. 1. Push the ignition switch to the ON position.
2-64 Instruments and controls SIC3250 PERSONAL LIGHTS GUID-0C0F640C-E28C -4C80-A359-ED 9156EF8799 Rear GUID-DE748F3D-E993-465D-88 64-C0F70AE4E8D1 Push the button as illustrated to turn the light on or off .
OFF position GUID-0848C0A2-C26A-461 8-85A5-C154CB2100FD When the switc h is in the OFF position * 3 , the lights will not illuminate, regardless of the condition. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharg ed battery.
2-66 Instruments and controls GUID-250D58C4-A60D- 4350-82C0-40723C71E6FC The HomeLink ® Universal Transceiver pro- vides a convenient way to consolidate the functions of up to three individual hand- held transmitters into one built-in device. HomeLink ® Universal T ransceiver: .
JVI0428X 2. Using both hands, simultaneously press and hold the desired HomeLink ® button and handheld transmitter but- ton. DO NOT release until the HomeLink ® indicator light * 1 flashes slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released.
2-68 Instruments and controls stand on your vehicle to perform the next steps. 4. At the receiver located on the garage door opener motor in the garage, loca te the “ learn ” or “ smart ” butt.
mitted. For convenience, the hand-held transmitter of the device may also be used at any time. PROGRAMMING TROUBLESHOOT- ING GUID-0C0B41AE-D602-46C7-A A98-C2CB74E99831 If the HomeLink ® does not quic kly learn the hand-held transmitter information: .
2-70 Instruments and contr ols FC C Notice: For USA : This device complies with Part 15 of the FC C Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer- ence rec eived, including interference that may cause undesire d operation.
3 Pr e-driving c hec ks and adjustments Keys ... .................................................................... 3-2 Intelligent Key ... ................................................. 3-2 V alet hand-off ... ...................................
3-2 Pre-driving chec ks and adjustments GUID-94E843C0-8427-4D89-B6 DF-18D25D089B3C A key number plate is supplied with your keys. Record the key number and keep it in a safe place (suc h as your wallet), not in the vehicle. If you lose your k eys, see an INFINITI retailer for duplicates by using the key number.
— Do not change or modify the In- telligent Key . — Do not use a magnet key holder. — Do not place the Intelligent Key near an electric appliance such as a television set or personal computer. — Do not allow the Intelligent K ey to come into contact with water or salt water, and do not wash it in a washing mac hine.
3-4 Pre-driving checks and adjustm ents GUID-42F0E4A6-FA32-4223-BC12-35C12246924D WARNING . Always have the doors locked while driving. Along with the use of seat belts, this prov ides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle.
SPA1814 L OCKING WITH INSIDE LOCK KNOB GUID-638A341C-9915-43A6-92C 9-E0267232AFCA T o lock the door individually, move the inside lock knob to the lock position * 1 . T o unloc k, move the inside lock knob to the unlock position * 2 . Be sur e not to leave the Intelligent Key inside the vehicle.
3-6 Pre-driving checks and adjustm ents 3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNL OCK) for more than 5 sec onds. 4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
CAUTION . Be sure to carry the Intelligent Key with you when operating the vehicle. . Never leave the Intelligent Key in the vehicle when you leave the vehicle. The Intelligent Key is always communicat- ing with the vehicle as it receive s radio waves.
3-8 Pre-driving checks and adjustm ents . Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV , audio equipment and personal comput ers. If an Intelligent Key is lost or stolen, INFINITI recommends erasing the ID code of that Intelligent Key from the vehicle.
SPA2326 DOOR L OCKS/UNLOCK S PRE CAU- TION GUID-B00D3208-6D21-48F7-BDBA -06C2F22EF1B8 . Do not push the door handle request switch with the Intelligent Ke y held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizin g that the Intelli- gent Key is outside the vehicle.
3-10 Pre-driving checks and adjustment s SPA2779 SPA2780 When you carry the Intelligent Key with you, you can loc k or unloc k all doors by pushing the door handle request switch (driver ’ s or front passenger ’ s) * A or the lift gate request switch * B within the range of operation.
Lockout prot ection: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 T o prevent the Intelligent Key from being accidentally locked in the vehicle, lockout protection is equipped with the Intelligent Key system.
3-12 Pre-driving checks and adjustment s switch on the instrument panel or lower part of the lift gate. See “ Lift gate ” (P . 3-18). BA TTERY SA VER SYSTEM GUID-786D2EEA-5854- 4E6B-9C0A-3296C3FF1.
TROUBLESHOOTING GUIDE GUID-71D02555-16BF-4091-AA2 F-FBA43C0FB588 Symptom Possible cause Action to take When pushing the ignition switc h to stop the engine The SHIFT P warning appears on the display and the inside warning chime sounds con- tinuously or for a few seconds.
3-14 Pre-driving checks and adjustment s GUID-DE778BCF-B99A-4DA7-94C 5-DF2F772B0219 WARNING The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that radio waves may affect air craft navigation and communication syst ems.
Locking doors and fuel-filler door GUID-69AC6A3D-261B-4C 88-9BC9-DD3A27C88837 1. Move the selector lever to the P (Park) position, push the ignition switc h to the OFF position and make sure you carry the Intelligent Key with you.* 2. Close all the doors and the lift gate.
3-16 Pre-driving checks and adjustment s be operated when the ignition switch is in the ON position. Using panic alarm GUID-9452550C-005D-4C29-9F1 9-31ED802F61C3 If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1.
Hazard indic ator and horn mode: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 DOOR LOCK DOOR UNLOCK Intelligent Key system (Using door handle or lift gate request switch) HAZARD - twice OUTSIDE CHIME - .
3-18 Pre-driving checks and adjustment s GUID-FE000314-D7F0-4AD6-AF71-5 B82F75F04B0 JVP0103X 1. Pull the hood lock release handle * 1 located below the instrument panel; the hood will then spring up slightly. 2. Pull the lever * 2 up at the front of the hood with your finger tips and raise the hood.
OPERA TING POWER LIF T GA TE GUID-35B29182-0FF6- 42A9-B62E-4541B5E1C075 T o operate the power lift gate, the selector lever must be in the P (Park) position.
3-20 Pre-driving checks and adjustments SPA2463 Power lift gat e button — Intelligent Key SPA2440 Power lift gate switch — Lift gate Power open GUID-93B776BA-7F85-429E-AC0F- D7C96F88027B When the lift gate is fully closed, the lift gate will fully open automatically by performing one of the following opera- tions: .
the ignition switc h is in the ON position. Auto reverse function GUID-EC8F1C01-9FE1 -4B41-9A22-0A678FDFA5A1 The auto-reverse function enables the lift gate to automatically reverse when some- thing is caught in the lift gate as it is opening or closing.
3-22 Pre-driving checks and adjustments SPA2880 * 1 Lift gate opener switc h * 2 Power lift gate switc h — Lift gate * 3 Power lift gate switc h — Instrument panel * 4 Power lift gate main switch Middle stop function GUID-561FA377-9F56-46DD-82FB-597207 71965F The power lift gate can be set to stop at a mid-open range.
function. However, this may result in minor personal injury if someone is behind the vehicle when the switch is activated, or damage to the lift gate. NOTE: . T o avoid damaging the lift gate system , do not manually for ce the lift gate to open or close when the lift gate is moving.
3-24 Pre-driving checks and adjustments SPA2522 LIFT GA TE RELEASE LEVER GUID-2E4382D2-053C-44F2-8D 54-10221346AA68 If the lift gate cannot be opened with the door lock switch due to a discharged battery, follow these steps. 1. Remove the cover * A inside of the lift gate using a suitable tool.
built-in safety valve needed for proper operation of the fuel system and emis- sion contr ol syst em. An incorr ect cap can result in a serious malfunction and possible injury. It could also caus e the malfunction indicator light to come on. . Never pour fuel into the throttle body to attempt to start y our vehicle.
3-26 Pre-driving checks and adjustments SPA2524 T o remove the fuel-filler cap: 1. Turn the fuel-filler cap countercloc kwise to remove. 2. Put the fuel-filler cap on the cap holder * A while refueling. T o install the fuel-filler cap: 1. Insert the fuel-filler cap straight into the fuel-filler tube.
GUID-95892D7A-9426-4BF3-9790- B203F407E3FE WARNING . Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. . Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfort.
3-28 Pre-driving checks and adjustments For more information, see “ Automatic drive positioner ” (P .3-32). GUID-0E6A7B36-6F14-49B7-8E 47-FADFD89E0563 SPA2471 1.
GUID-7EA98A31-E7A3-4913-AD21-9 6E01843E14F SPA2447 INSIDE MIRROR GUID-5B83EE67-E9E9-45 D0-832E-DF080FD9E09C Adjust the height and the angle of the inside mirror to the desired position.
3-30 Pre-driving checks and adjustments For the HomeLink ® Universal T ransceiver operation, see “ HomeLink ® Universal T ransceiver ” (P .2-66). SPA2214 OUTSIDE MIRRORS GUID-0F47C170-B53D-469E-B980- 6262E97ED2E8 WARNING Objects viewed in the outside mirror on the passenger side are closer than they appear.
SPA1732A Foldable outside mirrors GUID-6304F622-C60E-4C 4E-AD43-2AD64F0E8BCF CAUTION . Do not touch the mirrors while they are moving. Y our hand may be pinc hed, and the mirror may malfunction. . Do not drive with the mirrors stor ed. Y ou will be unable to see behind the vehicle.
3-32 Pre-driving checks and adjustments SIC3869 VANIT Y MIRROR GUID-3780BCDB-5920-4 2A8-A7E5-6 1F0F7698B59 T o use the front vanity mirror, pull down the sun visor and pull up the cover. GUID-5D3DB23B-FAEA-453A-AE25-5951BD40B38 2 The automatic drive positioner system has three features: .
Initialize entr y/exit function GUID-CF566402-5592-4485-AD8B-9 C26CE39C0D0 If the batter y cab le is disconnected, or if the fuse opens, the entry/exit function will not work though this function was set on before.
3-34 Pre-driving checks and adjustments holding the SET switch for more than 10 seconds while the ignition switch is in the AC C position. The indicator lights on the memor y switches (1 and 2) will blink once when the function is canc eled, and the indicator lights will blink twice when the function is activated.
Selecting the memorized position GUID-2FEA9244-0775-4478-953 1-20E8C2DBBEC5 1. Move the selector lever to the P (Park) position. 2. Use one of the following methods to move the driver ’ s seat, the outside mirrors and the steering wheel.
3-36 Pre-driving checks and adjustments MEMO.
4 Monitor , climat e, audio, phone and voic e rec ogni- tion syst ems Safety note ... .......................................................... 4-3 Center multi-function control panel ... ...................... 4-3 How to use INFINITI controller ... .
CD/DVD/USB memory care and cleaning ... ....... 4-90 Steering-wheel-mounted controls for audio ... .... 4-91 Antenna ... ........................................................ 4-92 Car phone or CB radio ... ....................................... 4-93 Bluetooth ® Hands-Free Phone System (models with navigation system) .
GUID-BF01B3FB-964A-4D 69-9FDE-7 AD7A547038E WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound.
4-4 Monitor, climate, audio, phone and voice recognition systems SAA1524 Models without navigation syst em 1. “ AUX ” button (P .4-54) 2. “ RADIO AM·FM ” band selector button (P .4-54) 3. INFINITI controller (P .4-5) 4. “ OFF ” brightness control and display ON/OFF button (P .
HOW TO USE INFINITI CONTROLLER GUID-6837BE8C-F9DA-48E4-B182 -4FB0EA348AE5 Choose an item on the display using the main directional buttons * 2 (or additional directional buttons * 6 models with navi- gation system) or center dial * 3 , and push the ENTER button * 1 for operation.
4-6 Monitor, climate, audio, phone and voice recognition systems SAA2473 Example T ouc h screen operation GUID-2D242F95-D6A4- 4173-9153-286308D4DDDB With this system, the same operations as those for the INFINITI controller are possi- ble using the touc h screen operation.
. Delete: Deletes the last c haracter that has been input with one touch. Push and hold the button to delete all of the char- acters. . OK: Completes c haracter inputs. T ouc h screen maintenance GUID-AC92A1AA-5F9B-412 1-ADE4-61BD97D61473 If you clean the display screen, use a dry, soft cloth.
4-8 Monitor, climate, audio, phone and voice recognition systems SAA2477 Models with navigation system JVH0179M Models without navigation syst em HOW TO SELECT MENUS ON THE SCREEN GUID-AA4D7312-EEA8 -4B34-94A3 -5187625DBB9E V ehicle functions are viewed on the display screen in menus.
GUID-045F576B-8C5C -48C7-9686-4E43E7F36A01 HOW TO USE ST A TUS BUTTON GUID-FC579136-5898-4FA8-800F-01E110DC09 EF Y ou can c heck information related to the audio, climate control system, fuel con- sumption and navigation system (if so equipped) by pressing the ST ATUS button repeatedly.
4-10 Monitor, climate, audio, phone and voice recognition systems V ehicle information display GUID-24CF37C9-3DF2-46E7-BB0D -F09593646A3F 1. Push the INFO button on the cont rol panel. 2. Select an item from the INFO menu. 3. After viewing or adjusting the informa- tion on the following screens, push the BACK button to return to the INFO menu.
Fuel Economy information GUID-57037A3E-D13 8-4A88-B1B 9-AF4F7EB7B3F0 The approximat e distance to empty, aver- age fuel economy and current fuel ec ono- my will be displayed for reference. T o reset the average fuel economy (Avg Fuel Econ), select the “ Reset Fuel Eco ” or “ Reset ” key .
4-12 Monitor, climate, audio, phone and voice recognition systems the “ Select Units ” key (models with navi- gation system) with the INFINITI controller and push the ENTER button. In cas e of low tire pressure, L OW PRES- SURE information will be displayed on the screen.
Maintenance information GUID-52717FA3-EE30-48ED-B71F-0859F9F07 9C0 The maintenance intervals can be dis- played for the engine oil, oil filter, tire and other reminders. T o set a maintenance interv al, select a preferred item from the list. Y ou can also set to display a mess age to remind you that the maintenance needs to be performed.
4-14 Monitor, climate, audio, phone and voice recognition systems SAA3145 Others information (models with navigation system) GUID-442FE4D1-59DA- 4188-B826-C01A51FF56F1 The Others information display will appear when pushing the INFO button and select- ing the “ Others ” key .
HOW TO USE SETTING BUTTON GUID-21D2D825-C781-4D 7A-802D-5DBBC611FDD4 The display as illustrated will appear when the SETTING button is pushed. Designs and items displayed on the screen may vary depending on the models. For navigation settings, refer to the sepa- rate Navigation System Owner ’ s Manual.
4-16 Monitor, climate, audio, phone and voice recognition systems played. For some music, it may be difficult to realize the effect of this feature. DivX ® Registration C ode (models with navigation .
Guidance V olume: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 T o adjust the guidanc e voice volume, select the “ Guidance Volume ” and adjust it with the INFINITI controller. Y ou can also adjust the guidance voice volume by turning the VOLUME cont rol knob while voice guidance is being an- nounced.
4-18 Monitor, climate, audio, phone and voice recognition systems When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off auto- matically 5 seco nds after the operation is finished. T o turn on the screen, set this item to the ON position, or push and hold the “ OFF ” button.
SAA2487 Cloc k settings (models with navi- gation system) GUID-B883902F-AAEB-461E-9D1A-A B91686BA3EA The display as illustrated will appear when pushing the SETTING button and selecting the “ Others ” key , and then selecting the “ Cloc k ” key .
4-20 Monitor, climate, audio, phone and voice recognition systems SAA2489 Example Others settings (models with navi- gation system) GUID-D4DB2F44-35D 0-4833-B3 84-106AB311A866 The Others settings display will appear when pushing the SETTING button and selecting the “ Others ” key .
Lift Steering Wheel on Exit (if so equipped): GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 When this item is turned on, the steering wheel moves upward for easy exit if the ignition switc h is in the L OCK position and the driver ’ s door is opened.
4-22 Monitor, climate, audio, phone and voice recognition systems JVH0252X Models without navigation syst em The display illustrated will appear when pushing the SETTING button and selecting the “ Language & Units ” key . Select Language: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Select the “ Select Language ” key.
stop the vehicle in a safe location and apply the parking brak e. SAA2492 Full Screen Display: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 The full screen display will appear when selecting the “ Full Screen Display ” key . T o operate the Image Viewer or to change the settings, select the desired k ey using the INFINITI controller.
4-24 Monitor, climate, audio, phone and voice recognition systems — Maximum Resolution: 2048 6 1536 pixels — Maximum Size: 2-MB — C olors: 32768 (15-bit) — Maximum File Name lengths: 253- Bytes — Maximum Folders: 500 — Maximum Images per Folder: 1024 .
SAA1896 HOW TO READ DISPLA YED LINES GUID-BCFE75B5-C5A1- 4F87-B804-CF CA48BAE298 Guiding lines which indicate the vehicle width and distances to objects with re- ference to the bumper line * A are dis- played on the monitor . Distance guide lines: Indicate distanc es from the bumper.
4-26 Monitor, climate, audio, phone and voice recognition systems SAA1897 HOW TO PARK WITH PREDICTIVE C OURSE LINES GUID-59AAF71A-D98A-484D-9CC 4-31B90C68404B 1.
guide lines * D parallel to the parking space * C . 5. When the vehicle is parked in the space completely , move the selector lever to the “ P ” (Park) position and apply the parking brake.
4-28 Monitor, climate, audio, phone and voice recognition systems SAA1979 Backing up on a steep downhill GUID-8C5A07EB-1FF9-4 681-8CA9-B5329E4077F2 When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown further than the actual distance.
SAA1980 Backing up behind a projecting object GUID-670CA3F8-9400-411F-8372 -B86FED77E300 The position * C is shown further than the position * B in the display .
4-30 Monitor, climate, audio, phone and voice recognition systems HOW TO ADJUST SCREEN GUID-FEF721F4-FD6F-4B52-A 3A2-CB66E29E880C T o adjust the Display ON/OFF , Brightness, Tint, Color, C ontrast and.
GUID-1C82F6B0-F35D-4D10-888 3-9C4F05B7CE7C When you push the CAMERA button or shift the selector lever into the R (Reverse) position while the ignition switc h is in the ON position, the Around View Monitor operates. The monitor displays various views of the position of the vehicle.
4-32 Monitor, climate, audio, phone and voice recognition systems may enter the camera unit ca using water condensation on the lens, a malfunction, fire or an electric shock. . Do not strike the cameras. They are precision instruments. Doing so could cause a malfunction or cause damage resulting in a fire or an electric shock.
: Shift the selector lever : Select the “ Change View ” key on the screen : Push the CAMERA button * A : Original screen before the Around View Monitor is operated * B : Rear view/bird-eye view sc.
4-34 Monitor, climate, audio, phone and voice recognition systems played. . When selecting the “ Change View ” key on the screen, the view on the screen will switch between the available views * 1 1 / * 1 3 / * 2 0 .
SAA1840 Front view SAA1896 Rear view Front and rear view GUID-58A6B780-BD44-4 999-A025-3284F1E11B62 Guiding lines, whic h indicate the vehicle width and distances to objects with re- ference to the vehicle body line * A , are displayed on the monitor .
4-36 Monitor, climate, audio, phone and voice recognition systems . A line on the ground may be misaligned and is not seen as being straight at the seam of the views.
the predictive course lines are shown at back of the vehicle. SAA1842 Front-side view GUID-DAA5B21F-4CA9-4881- BCF0-35538422B752 Guiding lines: Guiding lines that indic ate the width and the front end of the vehicle are displayed on the monitor. The front-of-vehicle line * 1 shows the front part of the vehicle.
4-38 Monitor, climate, audio, phone and voice recognition systems JVH0322X Front-wide view JVH0321X Rear-wide view Front-wide/rear-wide view GUID-4CCE7ECF-CBC4-4E29-9EF B-18866D91A6B1 The front-wide/rear-wide view shows a wider area on the entire screen and allows the chec king of the blind corners on the right and left sides.
DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DISTANCES GUID-3CC6A82D-7360-4E34-99 EF-49B6229F18C4 Moving to a steep uphill GUID-A98524A9-57FE-4537-A0 8C-DBE905A32176 When moving the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance.
4-40 Monitor, climate, audio, phone and voice recognition systems SAA1923 Moving near a projecting object GUID-AD77F4BA-FA47-438B-94C2-96C482 A52387 The predictive course lines * A do not touch the object in the display . However, the vehicle may hit the object if it projects over the actual moving co urse.
compressed-air brakes or a pneumatic drill may affect the function of the system; this may include reduced per- formance or a f alse activation. . This function is designed as an aid to the driver in dete cting lar ge stationary objects to help avoid damaging the vehicle.
4-42 Monitor, climate, audio, phone and voice recognition systems JVH0266X When the “ ” * 1 is selected, the indicator * 2 will turn off and the sonar will be turned off temporarily. The Moving Object Detection (MOD) system will also be turned off at the same time.
chec k the surrounding to ensure it is safe to maneuver. . The MOD system does not have the function to detect the surrounding sta- tionary objects. JVH0289X Bird-eye view JVH0290X Front view / rear v.
4-44 Monitor, climate, audio, phone and voice recognition systems While the sonar is beeping, the MOD system does not c hime. A blue MOD icon * 3 is displayed in the view where the MOD system is operative. A gray MOD icon * 3 is displayed in the view where the MOD system is not operative.
View Monitor while the vehicle is moving. Make sure the parking brake is firmly applied. JVH0323M AROUND VIEW MONITOR SETTINGS GUID-E1824E11-A367-4A93-8F99-7 8890EC5D4D6 T o set up the Around View Monitor to your preferred settings, push the SETTING but- ton, select the “ Other ” key and then select the “ Camera ” k ey.
4-46 Monitor, climate, audio, phone and voice recognition systems JVH0269X Moving Object Dete ction (MOD): Activate or deactivate the Moving Object Detection (MOD) system. When this item is set to ON, the MOD is activated. When this item is turned to OFF (indicator turns off), the MOD system is deactivated.
JVH0271X When the “ [X] ” icon is displayed on the screen, the cam era image may be rece iving temporary electronic disturbances from surrounding devices. This will not hinder normal driving operation but the system should be inspected by an INFINITI retailer if it occurs frequently.
4-48 Monitor, climate, audio, phone and voice recognition systems GUID-3937E88E-58B2-4 D4C-A81D-034656C15E84 SAA2149 C enter ventilators SAA2150 Side ventilators SAA2151 Rear ventilators Open or close, and adjust the air flow direction of ventilators.
SAA2723 Models with navigation system SAA1520 Models without navigation syst em Y ou can individually set the driver and front passenger side temperature using eac h temperature control button.
4-50 Monitor, climate, audio, phone and voice recognition systems SAA1527 Without Advanced Cl imate C ontrol System (ACCS) SAA2153 With Advanced Climat e C ontrol System (AC CS) 1. “ AUTO ” automatic climate control ON button/T emperature control dial (dri- ver side) 2.
AUTOMA TIC CLIMA TE CONTROL GUID-0BE1694A-DD9 7-4BA4-BF 44-857EEABBA6F7 Automatic operation GUID-EEBF6925-BD00-4785-857D -0DF075978760 Cooling and/or dehumidified heating (AUTO): GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 This mode may be used all year round.
4-52 Monitor, climate, audio, phone and voice recognition systems Manual operation GUID-98E726A1-B84E-4603-A00E-6 B4E72820C32 Fan speed contr ol: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Push the fan speed increase “ ” or decrease “ ” buttons to manually co n- trol the fan speed.
SAA2734 Ion contro l: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 This unit generates highly co ncentrated Plasmacluster ® ions into the air blown from the ventilators and reduc es odors absorbed into the interior trim.
4-54 Monitor, climate, audio, phone and voice recognition systems SAA1983 The sunload sensor * A on the instrument panel helps maintain a constant tempera- ture.
equipment is used. These c haracteristics are completely normal in a given reception area, and do not indicate any malfunction in your INFINITI radio system. Reception conditions will constantly change because of vehicle movement. Buildings, terrain, signal distance and interference from other vehicles can work against ideal rece ption.
4-56 Monitor, climate, audio, phone and voice recognition systems cles exist. Static: Caused by thunderstorms, electrical power lines, electric signs and even traffic lights.
tion. — 3.1 in (8 cm) discs — CDs that are not round — CDs with a paper label — CDs that are warped, scratched, or have abnormal edges . This audio system can only play pre- recorded CDs. It has no capabilities to record or burn CDs. . If the CD cannot be played, one of the following messages will be displayed.
4-58 Monitor, climate, audio, phone and voice recognition systems identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are.
LHA0484 DVD (Digital V ersatile Disc) player (models with navigation system) GUID-2917B6C0-CBFF-450D-9 DAB-241FE2148356 . Do not force a compact disc into the CD/DVD insert slot. This could damage the CD/DVD player. . During cold weather or rainy days, the player may malfunction due to humid- ity.
4-60 Monitor, climate, audio, phone and voice recognition systems temperature of the player returns to normal. If the error persists, consult your local retailership. Unplayable File: . The file may be co py protected. . The file is not MP3, WMA, AAC, M4A or DivX ® type.
. T o avoid damage and loss of function when using a USB device, note the following precautions. — Do not bend the cable exc essively (1.6 in (40 mm) radius minimum). — Do not twist the cable excessively (more than 180 degrees). — Do not pull or drop the cable.
4-62 Monitor, climate, audio, phone and voice recognition systems Notes for iPod ® use: iPod ® is a trademark of Apple Inc., registered in the U.S. and other countries. . Improperly plugging in the iPod ® may cause a checkmark to be displayed on and off (flic keri ng).
* Windows ® and Windows Media ® are registered trademarks or trademarks of Microsoft Corporation in the United States of America and/or other countries. SAA2494 Playback or der: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 . The folder names of folders not contain- ing compressed audio files are not shown in the display .
4-64 Monitor, climate, audio, phone and voice recognition systems Specification c hart: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Supported media CD, CD-R, CD-RW, DVD-ROM*5, DVD±R*5, DVD±RW*5, DVD±R DL*5, USB2.
*3 Available codes depend on what kind of media, versions and information are going to be displayed. *4 When VBR files are played, the playback time may not be displayed correctly .
4-66 Monitor, climate, audio, phone and voice recognition systems T roubleshooting guide: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly. Check if the disc is scratched or dirty.
Compressed Video Files (models with navigation system) GUID-4B1EFDE5-D60B-46F6-8744-1 D218BD322BB Explanation of terms: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 . DivX ® - DivX ® refers to the DivX ® codec owned by DivX, Inc. used for a lossy compression of video based on MPEG- 4.
4-68 Monitor, climate, audio, phone and voice recognition systems Requirement for Supporting Video Playback: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Media CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL, USB 2.
dation and wireless conn ection disrup- tion. . While an audio device is connected through a Bluetooth ® wireless connec- tion, the battery power of the device may disc harge quicker than usual. . This system supports the Bluetooth ® Audio Distribution Profile (A2DP , AVRCP).
4-70 Monitor, climate, audio, phone and voice recognition systems The audio co ntrol buttons are also located on the center multi-function control panel. JVH0138X Models with navigation system 1. AM·FM·SA T radio band select button 2. DISC·AUX button SAA2922 Models without navigation syst em 1.
activation signal after subscribing the SiriusXM Satellite Radio. After receiving the activation signal, an available channel list will be automatically updated in the radio.
4-72 Monitor, climate, audio, phone and voice recognition systems . For SiriusXM Satellite Radio T urn the radio tuning knob to seek channels from all of the categories when any category is not selected. SEEK tuning/CA TEGORY (CA T): GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 .
stored as the new preset. . Customize Channel List Selects specific channels to skip while using the TUNE, SEEK/CATEGORY or Menu-Categories feature. . Favorite Artists & Songs Stores the current artist or song that is being played.
4-74 Monitor, climate, audio, phone and voice recognition systems information from CDs. T ext (models without navigation system): GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 When the “ T ext ” key .
. Do not attempt to modify the system to display a movie on the front screen while the vehicle is being driven. Doing so may distract the driver and may cause a collision and serious personal injury or death. CAUTION . Only operate the DVD while the vehicle engine is running.
4-76 Monitor, climate, audio, phone and voice recognition systems SAA2497 Playing a DVD GUID-CE3D9FCA-F18 E-4B48-8285-79536D8C0E12 DISC·AUX button: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Park the vehicle in a safe location for the front seat occupants to operat e the DVD drive while watc hing the images.
SAA2498 Example DVD settings GUID-32629F51-527A-4 BF7-91A5-DAB13226A19F Select the “ Settings ” key to adjust the following settings. Key (DVD- VIDEO): GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Keys for the DVD menu operation are displayed. : Move the cursor to select a DVD menu.
4-78 Monitor, climate, audio, phone and voice recognition systems DVD Language (D VD-VIDEO , VIDEO-CD): GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Select the “ DVD Language ” key to open the number entry screen. Input the number corresponding to the preferred language and select the “ OK ” key.
SAA2500 File selection (models with naviga- tion system) GUID-D4E9BD96-9078-4A44-8D7 1-6B9F88430457 When there are both audio and movie files in the USB memory, the mode select screen is displayed. Select the preferred content to play . When there is only one type of file, the audio or movie operation screen is dis- played and starts to play .
4-80 Monitor, climate, audio, phone and voice recognition systems When the REW button is pushed for less than 1.5 seconds after 3 sec onds from when the current trac k starte d playing, the beginning of the current track will be played. The INFINITI cont roller can also be used to select trac ks when the USB memory is being played.
ing to the movie playback mode. . Play Mode Select the preferred play mode. SAA2503 Movie file operation (models with navigation system) GUID-30AB9DDE-394E-4259-B4F 2-E7CE4E32EED3 Park the vehicle in a safe location for the front seat occ upants to operate the USB memory while watching the images.
4-82 Monitor, climate, audio, phone and voice recognition systems Skip (Previous c hapter) Select the “ ” key to skip the chapter(s) of the disc backward.
Bluetooth ® STREAMING AUDIO (models with navigation system) GUID-CCAA3EF0-821B-4E 76-AFEA-36C868643DF3 Y our INFINITI is equipped with Bluetooth ® Streaming Audio.
4-84 Monitor, climate, audio, phone and voice recognition systems SAA2505 Connecting procedure GUID-90E68FE5-9EFB-4A01-95 F4-823B7AC70F2D 1. Push the SETTING button and select the “ Bluetooth ” key . SAA2506 2. Select the “ Connect Bluetooth ” key .
SAA3005 4. When a passkey appears on the screen, operate the compatible Bluetooth ® audio device to enter the passkey. The pairing procedure for the audio device varies according to eac h audio device. See the Bluetooth ® audio Owner ’ s Manual for details.
4-86 Monitor, climate, audio, phone and voice recognition systems when the current trac k starte d playing, the beginning of the current track will be played. The INFINITI cont roller can also be used to select tracks when the Bluetooth ® audio play mode screen is shown on the display.
Connect ed Devices: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Registered devic es are shown on the list. Select a Bluetooth device from the list, the following options will be available. . Select Select “ Select ” to connect the selected device to the vehicle.
4-88 Monitor, climate, audio, phone and voice recognition systems * iPod ® is a trademark of Apple Inc., registered in the U.S. and other countries. CAUTION . Depending on size and shape of iPod ® and iPod ® cable, the con sole lid may not fully close.
display changes to the iPod ® mode. Interfac e: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 The interfac e for iPod ® operation shown on the vehicle center display is similar to the iPod ® interface. Use the INFINITI controller and the ENTER or BACK button to play the iPod ® with your favor ite settings.
4-90 Monitor, climate, audio, phone and voice recognition systems SAA0451 CD/DVD/USB MEMORY CARE AND CLEANING GUID-83AF00DE-DD3E-437A-85E8 -3C4433AB98CF CD/DVD GUID-44E4FB83-C3B4-42F0-AF0D -BEB6E3898F99 . Handle a CD/DVD by its edges. Never touch the surf ace of the disc.
1. Audio source switc h 2. Menu control switch (models with navigation system) or audio tuning switch (models without navigation system) 3. Back switc h 4.
4-92 Monitor, climate, audio, phone and voice recognition systems Bluetooth streaming audio (models with navigation system): GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 . Tilting up/down for less than 1.5 seconds will scroll up or down through the track numbers.
— The vehicle enters an automatic car wash. — The vehicle ente rs a garage with a low ceiling. — The vehicle is covered with a car cover. . Always properly tighten the antenna rod during installation. Otherwise, the an- tenna rod may break during vehicle operation.
4-94 Monitor, climate, audio, phone and voice recognition systems GUID-61CB5DE5-0726-4AEF-AD 72-315D1B535D73 WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
. Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption. . While a ce llular phone is connected through the Bluetooth ® wireless co n- nection, the battery power of the cellular phone may discharge quic ker than usual.
4-96 Monitor, climate, audio, phone and voice recognition systems SAA2248 C ONTROL BUTTONS GUID-7B91C5E2-B43D-4 525-A730-4E8AD453F2F8 1. T ALK button 2. PHONE SEND button SAA2519 C ONNECTING PROCEDURE GUID-B3579665-9529-4255-AA 3B-80A86E45F1F1 1. Push the button, and select the “ Connect Phone ” key.
Phone menu display . PHONE SELE CTION GUID-9468F7A4-90AE-4C93-9E43-03 E8792BEB34 Up to 5 cellular phones can be registered to the system. T o switc h to connect another cellular phone, push button and select the “ Connected Phones ” key. The regis- tered cell ular phones are shown on the list.
4-98 Monitor, climate, audio, phone and voice recognition systems SAA2523 5. Select the “ Voicetag ” key to record a name to speak when using the INFINITI V oice Reco gnition system. 6. Select the “ Store ” k ey and prepare to speak the name after the tone.
SAA2523 The following editing items are available: . Entry # Changes the displayed number of the selected entry. . Name Edit the name of the entry using the keypad displayed on the screen. . Number Edit the phone number using the key- pad displayed on the screen.
4-100 Monitor, climat e, audio, phone and voic e rec ognition systems SAA2621 5. Select the “ Call ” key to start dialing the number. There are different methods to make a call. Select one of the following options instead of “ Handset Phonebook ” in step 2 above.
. Hold Call Put an incoming call on hold. . Reject Call Reject an incoming call. T o finish the call, perform one of the following procedures listed below. 1. Select the “ Hang up ” key . 2. Push the button on the steering wheel. SAA3587 DURING A CALL GUID-491637EC-7496-4624-8 F72-4E4FD857FED0 There are some options available during a call.
4-102 Monitor, climat e, audio, phone and voic e rec ognition systems JVH0136M PHONE SETTING GUID-1627A37B-095F-4 DAE-8CC7-8 D70F25A0309 T o set up the Bluetooth ® Hands-Free Phone System to your preferred settings, push the SETTING button on the instrument panel and select the “ PHONE ” key.
TROUBLESHOOTING GUIDE GUID-98FF02E9-7F46-478E-BE6 6-E2A96DB25729 The system should respond correctly to all voice commands without difficulty. If problems are encountered, tr y the following solutions. Where the solutions are listed by number, try eac h solution in turn, starti ng with number 1, until the problem is resolved.
4-104 Monitor, climat e, audio, phone and voic e rec ognition systems GUID-15D0990F-B975-4602-B3 D0-498739F41B2C WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
may be difficult to hear the other person ’ s voice during a call. . Immediately after the ignition switch is pushed to the “ ON ” position, it may be impossible to receive a call for a short period of time.
4-106 Monitor, climat e, audio, phone and voic e rec ognition systems Bluetooth ® is a trademark owned by Bluetooth SIG, Inc., and licensed to Visteon Cor- poration. SAA2634 C ONTROL BUTTONS GUID-ADC5794C-CA38-4 CAA-98F7-BEDAF8071AEF 1. PHONE SEND button Push the button to initiate a V oice Recognition (VR) session or answer an incoming call.
. Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traf- fic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice comma nds cor- rectly. . Wait until a tone sounds before speak- ing a command.
4-108 Monitor, climat e, audio, phone and voic e rec ognition systems command recogniti on mode . 4. The system acknowledges the com- mand and announces the next set of available commands.
cent Calls, Connect Phone or Help ” . 3. Give your instructions to the system by saying: “ Dial John ” for example ( “ John ” must have been previously set as a voice tag for John ’ s phone number) or “ Dial One ” if John is classified as one in the phonebook.
4-110 Monitor, climat e, audio, phone and voic e rec ognition systems List of voice co mmands: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 COMMAND ACTION “ Call/Dial ” “ <name> ” Dials the specified <name>. “ Call/Dial ” “ Redial ” Dials the last number.
SAA2575 P AIRING PROCEDURE GUID-AAD5B7D6-C780-438F-A7E A-17D9D1E2392F Up to 5 cellular phones can be registered. 1. Push the button on the steering wheel. The system announces the available commands. 2. Speak: “ Connect Phone ” . The system acknowledges the command and an- nounces the next set of available commands.
4-112 Monitor, climat e, audio, phone and voic e rec ognition systems SAA2578 5. The system asks the user to speak a name for the phone. Speak: “ Y es ” . The system acknowl- edges the command and registers the cellular phone. If the name is too long or too short, the system tells the user, then prompts the user for a name again.
SAA2580 MAKING A CALL GUID-93A82B24-9588-433E-9F57 -3C3D90B22B31 T o make a call, follow the procedures below. 1. Push the button on the steering wheel. A tone will sound. 2. Speak: “ Call ” . The system acknowl- edges the command and announc es the next set of available commands.
4-114 Monitor, climat e, audio, phone and voic e rec ognition systems call. . “ Mute on/off ” — Use the Mute com- mand to mute the user ’ s voic e so the other party cannot hear it. Use the mute command again to unmute the user ’ s voice . .
SAA2583 Phonebook GUID-9B091183-6430-43A2-813 C-9DDBF64B5197 . (a name) Use the name comma nd to seek the name and locations registered in the phonebook in alphabetical order. When the system acknowledges the alphabet the user spoke, the system announces all registered names and locations beginning with that alphabet.
4-116 Monitor, climat e, audio, phone and voic e rec ognition systems SAA2584 Recent C alls GUID-052499E8-9446-4B18-B3 52-F87C669017FD . Incoming Use the Incoming command to make a call viewing the list of incoming calls. . Missed Use the Missed co mmand to make a call viewing the list of missed calls.
existing phone. If the user tries to connect a phone that has already been connected to the vehicle system, the system announces the name that the phone is already using. The connecting procedure will then be cancelled. The Add Phone command is not avail- able when the vehicle is moving.
4-118 Monitor, climat e, audio, phone and voic e rec ognition systems will prompt you to overwrite one. Follow the instructions provided by the system. 7. When preparation is complete and you are ready to begin, press the button. 8. The speake r adaptation mode will be explained.
GUID-575395B9-727F-43FF-A15 B-EDACD818AC35 INFINITI Voice Recognition allows hands- free operation of the Phone, Navigation, Information and Audio systems in one of two modes, Standard Mode or Alternate Command Mode. In Standard Mode, commands that are available are always shown on the display and announced by the system.
4-120 Monitor, climat e, audio, phone and voic e rec ognition systems SAA2530 4. Select the “ Alternate Command Mode ” key . 5. The indicator turns off and the Stan- dard Mode activates.
SAA2532 Getting Star ted GUID-841DA7DA-BD1C-4126-903 5-0A1C589FE36F Before using the INFINITI Voice Recognition system for the first time, you can confirm how to use commands by viewing the Getting Started section of the User Guide. 1. Select the “ Getting Started ” key .
4-122 Monitor, climat e, audio, phone and voic e rec ognition systems SAA2533 Useful tip s for c orrect operation GUID-0040E036-ECA2-4F1C-B8 0F-13F35A92C9BF Y ou can display useful speaking tips to help the system recognize your voice commands correc tly.
SAA2167 Giving voic e commands GUID-085677B5-7320- 4911-A84F-01206F17119B 1. Push the TALK switc h located on the steering wheel. SAA2535 2. A list of commands appears on the screen, and the system announces, “ Would you like to access Phone, Navigation, Information, Audio or Help? ” .
4-124 Monitor, climat e, audio, phone and voic e rec ognition systems steering switc h or use the audio system volume knob while the system is making an announcement. How to speak numbers: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 INFINITI V oice Reco gnition requires a ce r- tain way to speak numbers when giving voice commands.
Command List GUID-51E96D88-63BA-462B-914B-A 7595C5813C2 Category C ommand: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Command Action Phone Operates the Phone function Navigation Operates the Navigation function Information Displays the vehicle Information function Audio Operates the Audio function.
4-126 Monitor, climat e, audio, phone and voic e rec ognition systems Command Action Previous Destinations Sets a route to a previous destination. . Information Command: Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information.
V oice command examples GUID-33326639-5C75-4573-840 C-AD81EF0BD841 T o use the INFINITI Voice Recognition function, speaking one command is some- times sufficient, but at other times it is necessary to speak two or more com- mands. As examples, some additional basic operations by voice commands are described here.
4-128 Monitor, climat e, audio, phone and voic e rec ognition systems SAA2536 4. Speak “ Dial Number ” . SAA2537 5. Speak “ 8 0 0 ” . Selecting the “ Manual C ontrols ” key switches the screen to the keypad to input the phone number manually.
SAA2539 8. The system announces, “ Please say the last four digits ” or s ay change number. 9. Speak “ 6 2 0 0 ” . SAA2540 10. The system announc es, “ Dial or Change Number? ” 11. Speak “ Dial ” . 12. The system makes a cal l to 800-662- 6200.
4-130 Monitor, climat e, audio, phone and voic e rec ognition systems SAA2167 Example 2 - Placing an international call to the phone number 011-81-111-222- 3333: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 1. Push the TALK switc h located on the steering wheel.
SAA2541 5. Speak “ 011811112223333 ” . SAA2542 6. Speak “ Dial ” . 7. System makes a call to 011-81-111- 222-3333. NOTE: Any digit input format is available in the International Number input process.
4-132 Monitor, climat e, audio, phone and voic e rec ognition systems JVH0137M Activating Alternate Command Mode GUID-EF112A55-FA80-4F29-AE0D-AB5292D985F6 When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode.
SAA2545 5. Select a category from the list. SAA2546 6. Select an item. 7. If necessary , scroll the screen using the INFINITI c ontroller to view the entire list.
4-134 Monitor, climat e, audio, phone and voic e rec ognition systems Command List GUID-87B206E2-2109- 4ADC-86CE-25460316F2DB Phone C ommands: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Command Action Dial Number Makes a call to a spoken phone number.
Navigation C ommands: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location.
4-136 Monitor, climat e, audio, phone and voic e rec ognition systems Information C ommands: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Where am I? Displays your current location.
Audio C ommands: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Command Action CD Starts to play a CD. FM T urns to the FM band, selecting the station last played. AM Turns to the AM band, selecting the station last played. XM Turns to the SiriusXM Satellite Radio band, selecting the channel last played.
4-138 Monitor, climat e, audio, phone and voic e rec ognition systems Help C ommands: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Command Action Command List Navigation C ommands Displays the navigation command list. Phone Commands Displays the phone command list.
General C ommands: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Command Action Go back C orrects the last recognition result to return to the previous screen Exit Cancels V oice Recognition Monitor, cli.
4-140 Monitor, climat e, audio, phone and voic e rec ognition systems SAA2547 Displaying user guide GUID-5779FB8A-7E05-4BCB-9E6 D-E1F132279F73 Y ou can confirm how to use voice com- mands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands.
. When the air conditioner is in the AUTO mode, the fan speed decreases auto- matically for easy recognition. . Wait until a tone sounds before speak- ing a command. . Speak in a natural voice without paus- ing between words. SAA2167 Giving voic e command GUID-4666E63F-987E -4BB7-BD98-A0C3184022B4 1.
4-142 Monitor, climat e, audio, phone and voic e rec ognition systems Repeat the comma nd in a clear voice. . Push the BACK button once to return to the previous screen. . If you want to cancel the command, push and hold the TALK switch for 1 second. The message “ Voice can- celed ” will be announced.
SAA2549 Speaker adaptation function (for Alternate C ommand Mode) GUID-AB0FED7B-F214-4CBB-AFB 6-5106B03407A0 The voice recog nition system has a func- tion to learn the user ’ s voice for better voice recognition performance. The system can memoriz e the voices of up to three persons.
4-144 Monitor, climat e, audio, phone and voic e rec ognition systems SAA2552 8. The system requests that you repeat a command after a tone. 9. After the tone sounds and the icon on the screen changes from to , speak the command that the system requested.
Minimize voice feedbac k (for Alter- nate C ommand Mode) GUID-776C67B9-F5B6-494C-A 6EA-3153E3F336F7 T o minimize the voice feedbac k from the system, perform the following steps. 1. Push the SETTING button on the instru- ment panel. 2. Select the “ Others ” key .
4-146 Monitor, climat e, audio, phone and voic e rec ognition systems TROUBLESHOOTING GUIDE GUID-F9B6FCF1-C9A0-4FA6-B77F-4A70F687A6 D8 The system should respond co rrectly to all voice commands without difficulty . If problems are encountered, follow the solutions given in this guide for the appropriate error.
5 Starting and driving Precautions when starting and driving ... ................. 5-3 Exhaust gas (carbo n monoxide) ... ....................... 5-3 Three-way catalyst ... ........................................... 5-3 Tire Pressure Monitoring Sys tem (TPMS) .
Distance C ontrol Assist (DCA) system (if so equipped) ... ..................................................... 5-54 Precautions on distance control assist system ... ................................................ 5-55 Distance cont rol assist operation .
GUID-D68C0968-2C03-4229-A9B4 -5A1EDD2A115A WARNING . Do not leave c hildren or adults who would normally re quire the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
5-4 Starting and driving cause a fire. CAUTION . Do not use leaded gasoline. Deposits from leaded gasoline seriously reduce the three-way ca talyst ’ s ability to help reduce exhaust pollutants.
Additional information GUID-391AE1C7-1CD5-4C27-A2 23-5241FF59940A . The TPMS does not monitor the tire pressure of the spare tire. . The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving).
5-6 Starting and driving and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. C ontact your INFINITI retailer as soon as possible for tire replacement and/or system resetting.
and avoid driving when tired. Never drive when under the influence of alcohol or drugs (including prescription or over-the- counter drugs which may cause drowsi- ness). Always wear your seat belt as outlined in the “ Seat belts ” (P .1-11) of this manual, and also instruct your passengers to do so.
5-8 Starting and driving RAPID AIR PRESSURE L OS S GUID-CB38C0C5-B0D4-4330-A2 B0-DB2F4D9DF493 Rapid air pressure loss or a “ blow-out ” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on under-inflated tires.
Don ’ t drive if your ability to operate your vehicle is impaired by alcohol, drugs, or some other physical condition. DRIVING SAFET Y PRECAUTIONS GUID-0E6CF00A-19F1-45 44-8B05-1 C59AC0392D6 Y our INFINITI is designed for both normal and off-road use.
5-10 Starting and driving by stro ng side winds. Slower speeds ensure better vehicle control. . Do not drive beyond the performance capability of the tires, even with AWD engaged. . For AWD equipped vehicles, do not attempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with the engine running.
GUID-387E946E-D3FB-4B7C-A 35C-9AFED0ADFEE4 WARNING Do not operate the push-button ignition switch while driving the vehicle exc ept in an emergency. (The engine will stop when the ignition switch is pushed 3 consecutive times or the ignition switch is pushed and held for more than 2 seconds.
5-12 Starting and driving SSD1021 PUSH-BUTTON IGNITION SWITCH OPERA TION GUID-19AF0B8B-5852-4753-9BD 8-0A6F5DF2A211 When the ignition switc h is pushed without depressing the brak e pedal, the ignition switch position will change as follows: . Push center once to change to AC C.
CAUTION Do not leave the vehicle with the push- button ignition switch in ACC or ON posi- tions when the engine is not running for an extended period. This can discharg e the battery.
5-14 Starting and driving GUID-C6A44AD2-C9E9 -4EA9-964E-986163AC0A36 . Make sure the area around the vehicle is clear. . Check fluid levels such as engine oil, coolant, brake fluid and window washer fluid as frequently as possible, or at least whenever you refuel.
start. 5. To stop the engine, shift the selector lever to the P (Park) position and push the ignition switc h to the OFF position. NOTE: Care should be tak en to avoid situations that can lead to potential battery dis- charge and potential no-start conditions such as: 1.
5-16 Starting and driving shift to P (Park), D (Drive) or DS (Drive Sport) while vehicle is moving rearwar d. Failure to do so could cause you to lose control and have an accident. CAUTION . Except in an emergency, do not shift to the N (Neutral) position while driving.
the selector lever to the P (Park) position. CAUTION Use this position only when the vehicle is completely stopped. R (Reverse): GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Use this position to bac k up. Always be sure the vehicle is completely stopped before selecting the R (Reverse) position.
5-18 Starting and driving The transmission shifts to the lower range. When canceli ng the manual shift mode, return the selector lever to the D (Drive) position.
should return to its normal operating condition. If it does not return to its normal operating condition, have an INFINITI retailer check the transmission and repair if nec essary .
5-20 Starting and driving Contr ol on downhill ro ads: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 The adaptive shift control system shifts to a low gear that suits the degree of the slope, and uses the engine braking to reduce the number of times that the brake must be used.
SPA2331 T o apply: Fully depress the parking brake pedal * 1 . T o r elease: 1. Firmly apply the foot brake * 2 . 2. Depress the parking brake pedal * 1 and the parking brake will be released. 3. Before driving, be sure the brake warning light goes out.
5-22 Starting and driving The LDW and LDP systems monitor the lane markers on the traveling lane using the camera unit * 1 located above the inside mirror.
. When traveling close to the vehicle in front of you, whic h obstructs the lane camera unit detection range. . When rain, snow or dirt adheres to the windshield in front of the lane cam era unit. . When the headlights are not bright due to dirt on the lens or if the aiming is not adjusted properly .
5-24 Starting and driving systems ON indic ator * 1 on the warning systems switc h illuminates. T o can cel the LDW system, push the warning systems switch. The warning systems ON indicator will turn off. T o turn on the system, push the warning systems switc h again.
— When driving on roads where the lane width is too narro w. — When driving without normal tire conditions (for example, tire wear, low tire pressure, installation of spare tire, tire chains, non-standard wheels). — When the vehicle is equipped with nonoriginal brake parts or suspen- sion parts.
5-26 Starting and driving SSD0672 LDP ON indic ator light (green)/ W arning light (orange) LDP system operation GUID-A0FBDA55-1A13-4B54-8 692-FD3F53246940 The LDP system provides a lane departure warning and brake control assistanc e when the vehicle is driven at speeds of approxi- mately 45 MPH (70 km/h) and above.
system will not turn on even if the dynamic driver assistanc e switch is pushed to on. T o set the system to on or off on the display, see “ Setting LDP system to ON/OFF ” (P . 5- 27). SSD0884 SSD0885 Setting LDP system to ON/OFF: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 1.
5-28 Starting and driving SSD0886 3. To set the LDP system to on or off, highlight the “ Lane Departure Preven- tion ” key , select ON or OFF and push the ENTER * 2 button.
T emporary disabled status at high te m- perature: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 If the vehicle is parked in direct sunlight under high temperature conditions (over approximately 104 8 F (40 8 C)) and then the LDP system is turned on, the LDP system may be deactivated automatically.
5-30 Starting and driving GUID-3AF831C5-B9AE-4 29C-98E A-DD3D081712CA PRECAUTIONS ON CRUISE CONTROL GUID-C2EADEDF-B79 F-40E7-9778-48FFABE14340 . If the cruise control system malfunc- tions, it will can cel automatic ally . The SET indicator on the dot matrix crystal display will then blink to warn the driver.
C OAST/SET switc h and release it. (The CRUISE SET indicator will come on in the instrument panel.) T ake your foot off the accelerator pedal. Y our vehicle will main- tain the set speed. . T o pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed.
5-32 Starting and driving GUID-9419D013-FCF6-417 B-973D-87903F341120 The Intelligent Cruise Control (ICC) system maintains a selected distance from the vehicle in front of you within the speed range of 0 to 90 MPH (0 to 144 km/h) up to the set speed. The set speed can be selected by the driver between 20 to 90 MPH (32 to 144 km/h).
SSD0913 1. V ehicle-to-vehicle distance control mode 2. Conventional (fixed speed) cruise con- trol mode Push the MAIN switc h * A to choose the cruise control mode between the vehicle- to-vehicle distance control mode * 1 and the conventional (fixed speed) cruise con- trol mode * 2 .
5-34 Starting and driving JVS0124X PRECAUTIONS ON VEHICLE-TO- VE- HICLE DIST ANCE C ONTROL MODE GUID-0068590B-5675-4F31-8813-EA CB6A3E5FCC The system is intended to enhance the operation of the vehicle when following a vehicle traveling in the same lane and direction.
conditions. T o avoid accidents, never use the Intelligent Cruise Control system under the following conditions: — On roads where the traffic is heavy or there are sharp cur ves — On slippery road surfaces such as on ice or snow , etc. — During bad weather (rain, fog, snow, etc.
5-36 Starting and driving traveling ahead. The sensor generally detects the signals returned from the reflectors on a vehicle ahead. Therefore, if the sensor cannot detect the reflector on the vehicle ahead, the IC C system may not maintain the selected distanc e.
standstill with a warning chime. . When the vehicle traveling ahead has moved out from its lane of travel, the vehicle-to-vehicle distance control mode acc elerates and maintains vehi- cle speed up to the set speed. The IC C system does not control vehicle speed or warn you when you approach stationary and slow moving vehicles.
5-38 Starting and driving SSD0253 When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the IC C sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead.
SSD0914 Intelligent cruise control switc h GUID-17F085DA-9D45-4 B45-A9C6-44F2E0025210 The system is operated by a MAIN switch and four control switches, all mounted on the steering wheel. 1. ACCELERA TE/RESUME switch: Resumes set speed or increases speed incrementally.
5-40 Starting and driving 4. Indicates your vehicle 5. Set vehicle speed indicator: Indicates the set vehicle speed. For Canadian models, the speed is displayed in km/h. 6. Intelligent Cruise Control system warn- ing light (orange): The light comes on if there is a malfunction in the IC C system.
SSD0916 T o set cruising speed, accelerate your vehicle to the desired speed, push the COAST/SET switc h and release it. (Vehicle ahead detection indicator, set distance indicator and set vehicle speed indic ator come on.) Tak e your foot off the accelerator pedal.
5-42 Starting and driving SSD0614 When the C OAST/SET switch is pushed under the following conditions, the system cannot be set. A warning c hime will sound and the IC C indicators will blink.
SSD0610 1. System set display with vehicle ahead 2. System set display without vehicle ahead System operation GUID-D24D9274-110A-47FC-8DE E-411846968BE0 WARNING Normally when controlling the distance to a vehicle ahead, this system automatically accelerates or decelerates your vehicle according to the speed of the vehicle ahead.
5-44 Starting and driving the IC C system is in operation, the system controls the distance to that vehicle. When a vehicle is no longer detected under approximately 15 MPH (24 km/h), the system will be can celed. SSD0611 When passing another vehicle, the set speed indicator will flash when the vehicle speed exceeds the set speed.
T o r eset at a slower cruising speed, use one of the following methods: . Lightly tap the brake pedal. When the vehicle attains the desired speed, push the C OAST/SET switch and release it. . Push and hold the C OAST/SET switc h. The set vehicle speed will decrease by approximately 5 MPH (5 km/h for Canada).
5-46 Starting and driving SSD0613C . The distance to the vehicle ahead will change according to the vehicle speed. The higher the vehicle speed, the longer the distance. . If the engine is stopped, the set distance becomes “ long ” . (Each time the engine is started, the initial setting becomes “ long ” .
SSD0284A NOTE: The approach warning c hime may sound and the syst em display may blink when the ICC sensor detects some reflectors * A which are fitte d on vehicles in other lanes or on the side of the road. This may cause the IC C syst em to decelerate or acc elerate the vehicle.
5-48 Starting and driving SSD0614 Warning light and display GUID-C81AFEED-63C2 -4DE9-9167-6D1539AC39D1 Condition A: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 Under the following conditions, the Intelli- gent Crui se C ontrol system is automatic ally canceled.
SSD0621 Condition C: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 When the ICC system is not operating properly, the chime sounds and the system warning light (orange) will come on. Action to take: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 If the warning light comes on, park the vehicle in a safe place.
5-50 Starting and driving INFINITI retailer. . Do not attach a sticker (including transparent material) or install an accessory near the sensor. This could cause fai lure or malfunction.
SSD0618 Conventional (fixed speed) cruise control mode display and indica- tors GUID-078516D5-42A5-4906-9C7B -8E13AFD2CE68 The display is located between the speed- ometer and tac hometer. 1. MAIN switch indic ator: Indicates that the MAIN switch is ON.
5-52 Starting and driving set your desired cruising speed. Pushing the MAIN switch again will turn the system completely off. When the ignition switch is pushed to the OFF position, the system is also automati- cally turned off.
the C OAST/SET switch and release it. 2. Push and hold the COAST/SET switch. Release the switch when the vehicle slows down to the desired speed. 3. Push, then quickly release the COAST/ SET switc h. Each time you do this, the set speed will decrease by about 1 MPH (1.
5-54 Starting and driving retailer. PREVIEW FUNCTION (for Intelligent Cruise Control system equipped models) GUID-E4B8CEC2-F3BF-4E10-88 DC-F972BCD947B0 The IC C system with the preview function identi.
JVS0124X PRECAUTIONS ON DISTANCE CON- TROL ASSIST SYSTEM GUID-31D93BDE-9B9D- 4868-879E-F7B824453238 The system is intended to assist the driver to keep a following distance from the vehicle ahead traveling in the s ame lane and direction.
5-56 Starting and driving — When rain, snow or dir t adhere to the system sensor — On ste ep downhill roads (frequent braking may result in overheating the brakes) — On repeated uphill and downhill roads . Do not use the Distance Control Assist system if you are towing a trailer.
In these instances, the Distance Control Assist (DCA) system may not be able to decelerate the vehicle properly. Be sure to chec k and clean the sensor regularly. The DCA system is designed to help assist the driver to maintain a following distance from the vehicle ahead.
5-58 Starting and driving SSD0252 The detection zone of the sensor is limited. A vehicle ahead must be in the detection zone for the system to operate. A vehicle ahead may move outside of the detection zone due to its position within the same lane of travel.
SSD0253 When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the system to work inappropriately .
5-60 Starting and driving The light comes on if there is a malfunction in the DCA system. SSD1183 Operating Distance Control Assist (DCA) system GUID-4F5A6015-46BB-46C3-91FE-2 B62D77CFBB3 T o turn on the DCA system, push the dynamic driver assistance switc h on the steering wheel after starting the engine.
SSD0884 SSD0885 Setting DCA syst em to ON/OFF: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the INFINITI controller . Then push the ENTER * 2 button. 2.
5-62 Starting and driving SSD0771 Under the following conditions, the Dis- tance Control Assist system will not oper- ate and the Distance C ontrol Assist (DCA) system switch indicator light will blink: . When the SNOW mode switc h is ON (T o use the DCA system, turn off the SNOW mode switch, then turn on the dynamic driver assistance switc h.
SSD0746 1. System set display with vehicle ahead 2. System set display without vehicle ahead System operation GUID-A0EAF6A2-2735-409A-AD6 8-F99E93C35E82 WARNING The Distance Control Assist system auto- matically decelerates your vehicle to help assist the driver to maintain a following distance from the vehicle ahead.
5-64 Starting and driving WARNING . When the vehicle ahead detection in- dicator light is not illuminat ed, system will not contr ol or warn the driver . . Never place your foot under the brake pedal. Y our foot may be ca ught when the system contr ols the brake.
SSD0284A NOTE: The approach warning c hime may sound and the syst em display may blink when the sensor detects some reflectors * A which are fitte d on vehicles in other lanes or on the side of the road. This may cause the DCA system to operate inappropriately .
5-66 Starting and driving . When driving into a strong light (for example, sunlight) Action to take: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 When the conditions listed above are no longer present, turn the system off with the dynamic driver assistanc e switch.
conditions, have the vehicle checked at an INFINITI retailer. Sensor maintenanc e GUID-F63B8BC7-76AF-4CF0-AE7C -656B1B653597 How to handle the sensor: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 The sensor for the DCA system is common with Intelligent Cruise Control and is located below the front bumper.
5-68 Starting and driving SSD1156 Warning syst ems switc h The FCW system uses the distance sensor * A located below the front bumper to measure the distance to the vehicle ahead.
— When abruptly acc elerating or de- celerating. — On a steep downhill slope or on roads with sharp curves. — When there is a highly re flective object near the vehicle ahead (for example, being very close to another vehicle, signboard, etc.) — When you are towing a trailer.
5-70 Starting and driving SSD1156 Warning syst ems switc h FCW system operation GUID-215D364E-A2AD-4F7B-A3D 8-2722CC7F5E69 The FCW system will function at speeds of approximately 10 MPH (15 km/h) and above, when the system turns on. The FCW system has an automatic setting mode and a manual setting mode to turn the system on.
JVS0124X SSD0749 V ehicle ahead dete ction indicator light The IBA system uses a distance sensor * A located below the front bumper to measure the distance to the vehicle ahead.
5-72 Starting and driving road spray . — When visibility is low (such as rain, fog, snow, etc.). — When snow or road spray from traveling vehicles is splashed. — When dense exhaust or other smoke (black smoke) from vehicles reduces the visibility of the sensor.
system may not detect them. In these instances the system may not be able to warn the driver properly . Be sure to chec k and clean the sensor regularly. . Excessive noise will interfere with the warning chime sound, and the chime may not be heard . .
5-74 Starting and driving pushed again, the system will turn on and the IBA OFF indic ator light will turn off . The IBA system will remain in the last ON or OFF state it was left in until it is manually changed by pressing the IBA OFF switch.
GUID-44459E62-6D34-4985-A A7E-DB14511A5AF5 SSD0336 The AWD warning light is located in the meter. The AWD warning light comes on when the ignition switch is pushed to the ON position. It turns off soon after the engine is started. If any malfunction occurs in the AWD system while the engine is running, the warning light will co me on.
5-76 Starting and driving the AWD syst em. Reduce the vehicle speed and have y our vehicle chec ked by an INFINITI retailer as soon as possible. . If the warning light re mains on after the above operation, have your vehicle chec ked by an INFINITI retailer as soon as possible.
2. Move the selector lever to the P (Park) position. 3. To help prevent the vehicle from rolling into the street when parked on a sloping drive way , it is a good practice to turn the wheels as illustrated. . HEADED DOWNHILL WITH CURB: * 1 T urn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb.
5-78 Starting and driving Set the C ontinuous Damping Control mode select switc h to the AUTO position * A for a smooth ride. Set the switch to the SPOR T position * B when you desire a quick response all the time. The SPORT mode indicator light will illumi- nate.
P ARKING BRAKE BREAK-IN GUID-36411D19-F29 9-446A-83A C-A14A35BE9B8C Break in the parking brak e shoes whenever the stopping effect of the parking brake is weakened or whenever the parking brake shoes and/or drums/rotors are replaced, in order to assure the best braking performance.
5-80 Starting and driving . This system will not operate when the vehicle is moving at approximately 20 MPH (32 km/h) or less. . The pre-pressure function ceases when the following cond itions are met: 1) When the driver depresses the accelerator pedal or the brake pedal.
— V ehicle position in the lane may cause the sensor to te mporarily not detect a vehicle in the same lane or may detect objects or vehicles in other lanes.
5-82 Starting and driving ANTI-L OCK BRAKING SYSTEM (ABS) GUID-05BD6092-1B8E -4209-895B-C61E290C6BAD WARNING . The Anti-lock Braking Syst em (ABS) is a sophisticated device, but it cannot pre- vent accidents resulting fr om careless or dangerous driving tec hniques.
Normal operation GUID-073F731A-9A7E -4179-A85D-2 D7BE89E5EE1 The ABS operates at speeds above 3 to 6 MPH (5 to 10 km/h). The speed varies according to road conditions. When the ABS senses that one or more wheels are close to loc king up, the actuator rapidly applies and releases hydraulic pressure.
5-84 Starting and driving reset to on when the ignition switch is placed in the off position then bac k to the on position. See “ Vehicle Dynamic Control (VDC) warn- ing light ” (P .2-18) and “ V ehicle Dynamic Control (VDC) off indicator light ” (P .
GUID-A774F1A5-9918-435 9-9334-8165D44064A0 The Rear Active Steer system is an electro- nically controlled four-wheel steering sys- tem. The angle of the rear wheels are adjusted by the Rear Active Steer system, depending on the vehicle speed and steering angle.
5-86 Starting and driving TIRE E QUIPMENT GUID-1A7BBCE1-397B-4946-94A0 -5BF38232E314 SUMMER tires have a tread designed to provide superior performance on dry pave- ment. However, the performance of these tires will be substantially reduc ed in snowy and icy cond itions.
ENGINE BL OCK HEA TER (if so equipped) GUID-16E27802-4A4A-4696-B0C2 -99BC154BED39 Engine block heaters are used to assist with cold temperature starti ng. The engine bloc k heater should be used when the outside temperature is 20 8 F ( − 7 8 C) or lower.
5-88 Starting and driving MEMO.
6 In c ase of emer gency Hazard warning flasher switch ... ............................. 6-2 Roadside assistance program ... .............................. 6-2 Emergency engine shut off ... .................................. 6-3 Flat tire ... ........
6-2 In cas e of emergency GUID-8A4B8BE2-9A68 -48E3-B58 8-BA5343A1DA47 SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency c onditions. All turn signal lights will flash. WARNING . If stopping for an emergency, be sure to move the vehicle well off the road.
GUID-84BCA28C-0818-44A2-B47 2-211FDD73486F T o shut off the engine in an emergency situation while driving perform the follow- ing procedure: . Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or . Push and hold the push-button ignition switch for more than 2 seconds.
6-4 In case of emer gency . Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pr essure sensors. CHANGING A FLA T TIRE GUID-FA679F87-F997-4151-B522-0DE43FDBA746 If you have a flat tire, follow the instruc- tions below.
SCE0766 Getting the spare tire and tools GUID-0DFA8917-4964-498D-B184-9E0295C6 57AC 1. Remove the cargo cover (if so equipped). See “ Cargo co ver ” (P .2-56). 2. Raise the luggage room floor cover using the handle * A , then hang it on the edge of the luggage room opening using the hook * B .
6-6 In case of emer gency Carefully read the caution label attac hed to the jack body and the following instruc- tions. SCE0771 Jack -up point 1. Place the jack directly under the jac k -up point as illustrated so the top of the jack contacts the vehicle at the jack-up point.
SCE0504 2. Loosen eac h wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not r emove the wheel nuts until the tire is off the ground. 3. Carefully raise the vehicle until the tire clears the ground. T o lift the vehicle, securely hold the jack lever and rod with both hands as shown above.
6-8 In case of emer gency 4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. Lower the vehicle comple- tely. WARNING . Incorrect wheel nuts or improperly tigh- tened wheel nuts can cause the wheel to become loose or come off.
GUID-D634C67C-A8EA-4F4B-B8 C2-6543FA38779A T o start your engine with a booster battery , the instructions and precautions below must be followed. WARNING . If done inc orrectly , jump starting can lead to a battery explosion, resulting in severe injury or death.
6-10 In case of emer gency SCE0772 VQ37VHR engine SCE0770 VK50VE engine WARNING Always follow the instructions below. Failure to do so could result in damage to the charg ing system and caus e personal injury . 1. Remove the engine compartment cover , if necessary.
CAUTION . Always connect positive (+) to positive (+) and negative ( − ) to body ground (as illustrated) — not to the battery. . Make sure the jumper cables do not touch moving parts in the engine com- partment and that clamps do not co ntact any other metal.
6-12 In case of emer gency GUID-677EEC53-B524-4F63-88AA-5 536A89B6328 CAUTION . Do not co ntinue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. . T o avoid the danger of being scal ded, never remove the radiator cap while the engine is still hot.
GUID-1937801A-8C4 3-4A34-98FB-067C4D2FEE47 When towing your vehicle, all State (Pro- vincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. T owing instructions are available from an INFINITI retailer.
6-14 In case of emer gency SCE0768 Two-wheel drive models TOWING RE C OMMENDED BY INFINITI GUID-34DF7332-3927-4A5F-A5CB-1 643FD04A697 Two-Wheel Drive (2WD) models GUID-C85BC796-4F54-47C4-A1D D-C031FAE.
SCE0736 All-wheel drive models All-Wheel Drive (AWD) models GUID-ED4C6466-2031-4B2E-A84B -2EAA13822FA0 INFINITI recomme nds that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated.
6-16 In case of emer gency VEHICLE RECOVERY (freeing a stuck vehicle) GUID-07A45EE1-5A3F-4E29-AC 26-C85B78AE7705 WARNING . Stand clear of a stuck vehicle. . Do not spin y our tires at high speed. This could cause them to explode and result in serious injury.
7 Appearanc e and c are Cleaning exterior ... ................................................. 7-2 Washing ... .......................................................... 7-2 Waxing ... ............................................................ 7-2 Removing spots .
7-2 Appearance and car e GUID-7DA65DF6-984A-4FE6-81A9 -B97E4987FE00 In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surface, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain .
. Wax your vehicle only after a thorough washing. Follow the instructions sup- plied with the wax. . Do not use a wax containing any abrasives, cutting compounds or clea- ners that may damage the vehicle finish. Machine compound or aggressive polish- ing on a base coat/clear coat paint finish may dull the finish or leave swirl marks.
7-4 Appearance and car e ambient temperature. . Rinse the wheel to completely r emove the cleaner within 15 minutes after the cleaner is applied. CHROME P ARTS GUID-28FAC3FB-0B34-4D74-B52E-742872 0F5196 Clean c hrome parts regularly with a non- abrasive chrome polish to maintain the finish.
CAUTION . Never use benzine, thinner, or any similar material. . Small dirt particles can be abrasive and damaging to the leather surfaces and should be removed promptly . Do not use saddle soap, ca r waxes, polishes, oils, cleaning fluids, solvents, detergents or ammonia-based cleaners as they may damage the leather ’ s natural finish.
7-6 Appearance and car e SAI0039 Floor mat positioning aid GUID-E56B69B7-55B5-4A96-AB9 2-03F37761DFB1 This model includes front floor mat brack - ets to act as floor mat positioning aid. NISSAN floor mats have been specially designed for your vehicle model.
GUID-066BD795-9CC 4-4ADE-8C1 C-ED6C1A7E3278 MOST C OMMON FACTORS CONTRI- BUTING TO VEHICLE CORROSION GUID-EE337E21-AE9D-4 463-8D40-C1336FD809DC . The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas.
7-8 Appearance and car e MEMO.
8 Maint enance and do-it-y ourself Maintenance requirement ... .................................... 8-2 Scheduled maintenanc e ... .................................. 8-2 General maintenance ... ....................................... 8-2 Where to go for service .
8-2 Maintenanc e and do-it-yourself GUID-6D234818-99A3-4E79-AC5 5-3831D0E77D4C Some day-to-day and regular maintenance is essential to maintain your INFINITI ’ s fine mechanic al condition, as well as its emis- sion and engine performance .
is released. When driving in areas using road salt or other corrosive materials, chec k lubrica tion frequently. Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely .
8-4 Maintenance and do-it-y ourself seat adjusters, seatback recliner, etc. to ensure they operate smoothly and that all latches loc k securely in every position. Check that the head restraints move up and down smoothly and that the locks (if so equipped) hold securely in all latched positions.
those used on icy roads or to control dust. It is very important to remove these substances, otherwise rust will form on the floor pan, frame, fuel lines and around the exhaust system. At the end of winter, the underbody should be thoroughly flushed with plain water, being care ful to clean those areas where mud and dirt may accumulate.
8-6 Maintenance and do-it-y ourself are under high pressure even when the engine is off. CAUTION . Do not work under the hood while the engine is hot. T urn the engine off and wait until it cools down. . Avoid direct contact with used engine oil and coolant.
GUID-591BFA5B-ACC0-4C10-805D-84A972DE4007 SDI2262 VQ37VHR ENGINE GUID-A9A92F72-9984-4610-9A98-D DA348D7EADC 1. Fuse/fusible link holder 2. Battery 3. Radiator filler cap 4. Engine oil dipstic k 5. Engine oil filler c ap 6. Brake fluid reservoir 7. Window washer fluid reservoir 8.
8-8 Maintenance and do-it-y ourself SDI2263 VK50VE ENGINE GUID-DFD7D79A-6F21-4FB4-8F EC-7DC094004184 T o remove the engine compa rtment covers, unhook the clips * A located as illustrated. T o remove the engine cover , pull the cover upward first * 1 and then toward the front of the vehicle * 2 .
SDI2264 1. Fuse/fusible link holder 2. Battery 3. Engine oil filler c ap 4. Radiator filler cap 5. Engine oil dipstic k 6. Brake fluid reservoir 7. Window washer fluid reservoir 8. Power steering fluid reservoir 9. Air cleaner 10. Drive belt location 11.
8-10 Maintenance and do-it-y ourself CAUTION . Never use any cooling system additives such as radiator sealer. Additives may clog the cooling system and cause damage to the engine, transmission and/or cooling system. . When adding or replacing coolant, be sure to use only Genuine NISS AN Long Life Antifreeze/Coolant (blue) or equiva- lent.
If the cooling system requires coolant frequently , have it checked by an INFINITI retailer. CHANGING ENGINE COOLANT GUID-033EF515-5494-4AB1-84 BA-077C94E5729B Major cooling system repairs should be performed by an INFINITI retailer. The service procedures can be found in the appropriate INFINITI Service Manual.
8-12 Maintenance and do-it-y ourself CHECKING ENGINE OIL LEVEL GUID-88F2BE58-218A-4 40E-9B33-A125F33C91B7 1. Park the vehicle on a level surface and apply the parking brak e. 2. Run the engine until it reaches operat- ing temperature. 3. Turn off the engine.
SDI2335 VQ37VHR engine — 2WD models SDI2047 VQ37VHR engine — AWD models SDI2266 VK50VE engine Engine oil and filter GUID-C484B1D4-4796-4 01A-AB5C-5EEA342E054A 1. Place a large drain pan under the drain plug. 2. Remove the oil filler cap. 3. Remove the drain plug * 1 with a wrench and completely drain the oil.
8-14 Maintenance and do-it-y ourself 8. Clean and re-install the drain plug with a new washer. Securely tighten the drain plug with a wrenc h. Drain plug tightening torque: 22 to 29 ft-lb (29 to 39 N·m) Do not use exc essive force. 9. Refill engine with recommended oil and install the oil filler cap securely.
GUID-57DE2F85-5B99-4BF8-8E37-3 E09A9B16B2E Contact an INFINITI retailer if replacement is required. CAUTION . Use only Genuine NISSAN Matic S A TF . Do not mix with other fluids.
8-16 Maintenance and do-it-y ourself GUID-0ABA4A17-3963-4E 68-8380-8E5E3D7B6E5A For further brake fluid specific ation infor- mation, see “ Capacities and recommended fuel/lubricants ” (P . 9-2) of this manual. WARNING . Use only new fluid from a sealed container.
Add a washer solvent to the washer for better cleaning. In the winter season, add a windshield washer antifreez e. Follow the manufacturer ’ s instructions for the mixture ratio. Refill the reservoir more frequently when driving conditions require an increased amount of window washer fluid.
8-18 Maintenance and do-it-y ourself ated by the battery is explosive. Do not allow battery fluid to contact your skin, eyes, f abrics, or painted surfaces. After touching a battery or battery ca p, do not touch or rub your eyes. Thoroughly wash your hands.
JUMP ST ARTING GUID-40948495-A7CB-4589-B06B- B465B0A3334B If jump starting is necessary, see “ Jump starting ” (P .6-9). If the engine does not start by jump starting, the battery may have to be replaced. Contact an INFINITI retailer. GUID-8EFC3123-4B89-4F5B-A7 96-63FB00FD5B0F CAUTION .
8-20 Maintenanc e and do-it-yourself SDI1411B VK50VE engine 1. Water pump 2. Alternator 3. Crankshaft pulley 4. Power steering fluid pump 5. Air conditioner compresso r WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts.
SDI2020 REPLACING SP ARK PLUGS GUID-72A1B54E-E710-47A8-83 D4-3549078FDD28 If replacement is required, see an INFINITI retailer for servicing. Iridium-tipped spark plugs GUID-6A0A8CDC-45E6 -43BA-9D94 -.
8-22 Maintenanc e and do-it-yourself wipe the inside of the air cleaner housing and the cover with a damp cloth. WARNING . Operating the engine with the air cleaner removed can cause you or others to be burned. The air cleaner not only cleans the air, it stops flame if the engine bac kfires.
SDI2048 REPLACING GUID-AD379CCA-9AF2-4BC3-8 BBE-76D4568A2624 Replace the wiper blades if they are worn. 1. Pull the wiper arm. 2. Push the release tab * A , and then move the wiper blade down the wiper arm * 1 while pushing the release tab to remove. 3.
8-24 Maintenanc e and do-it-yourself GUID-0113D1DF-9C7F-426E-BFC2 -6791CF890827 Contact an INFINITI retailer if chec king or replacement is required. GUID-4E660802-2B18-4F2E-BA05 -680E29FD0E98 If the brakes do not operate properly, have the brakes c hec ked by an INFINITI retailer.
GUID-1FFE3F37-9A0E-403A-AB 85-F46C763F61A1 SDI1479A ENGINE COMP ARTMENT GUID-52624265-87A7-4571-8C28 -08C50EC3EF99 CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire.
8-26 Maintenanc e and do-it-yourself SDI2034 P ASSENGER COMP ARTMENT GUID-9F151796-01BF-4EB6-89C B-D2932E45E349 CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire.
case, r emove the extended storage switch and replace it with a new fuse of the same rating. How to remove the extended storage switch: GUID-D73A39BF-43C8-459F-9 C24-47B7F579C407 1. To remove the extended storage switch, be sure the ignition switc h is in the OFF or L OCK position.
8-28 Maintenanc e and do-it-yourself the upper part from the lower part. 3. Replace the battery with a new one. Recommended battery: CR2032 or equivalent. . Do not touch the internal circuit and electric terminals as it could cause a malfunction. . Hold the battery by the edges.
GUID-9C564204-F2FB-40D8-AD0D-9 E2E9A9E424C JVM0156X 1. Headlight (high-beam, low-beam) 2. Front turn signal light 3. Map light 4. Front side marker light 5. Rear personal light 6. Fog light 7. Parking light 8. Puddle light 9. Step light 10. High-mounted stop light 11.
8-30 Maintenanc e and do-it-yourself HEADLIGHTS GUID-4AD3ECC7-3D82-48E2-B8AE -10CFFBF7F486 Replacing GUID-473483AB-2DF6-4F55-AB96-7 C071B73F17A Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog.
Replacement procedures GUID-BC03F8C1-99EA-4AAD-A38 1-341D7579A20F All other lights are either type A, B, C, D, E or F . When replacing a bulb, first remove the lens and/or cover.
8-32 Maintenanc e and do-it-yourself SDI1500B Cargo light SDI1839 V anity mirror light GUID-C9D0BB2A-393E-4E74-924C-6 13E773CAD1A If you have a flat tire, see “ Flat tire ” (P .
WARNING . Improperly inflated tires can fail suddenly and cause an accident. . The Gross Vehicle W eight rating (GVWR) is locat ed on the F .M. V .S. S./C.M. V .S.S. certification label. The vehicle weight capacity is indicated on the Tir e and Loading Information label.
8-34 Maintenanc e and do-it-yourself SDI2703 Tire and Loading Information label GUID-8BD5460D-36B2-4C75-B017 -C5417DDCDD2C * 1 Seating c apacity: The maximum number of occupants that c an be seated in the vehicle. * 2 V ehicle load limit: See “ V ehicle loading information ” (P .
SDI1949 Checking the tire pressure GUID-8E0E69DD-16D5-4BB2-81 F8-419999A87B5D 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or forc e the valve stem sideways, or air will escape.
8-36 Maintenanc e and do-it-yourself SDI1575 Example TIRE LABELING GUID-C06F0174-1C35-4FD5-9775-0 2BD3370873A Federal law requires tire manufac- turers to place standardized informa- tion on the sidewall of all tires.
SDI1607 Example * 2 TIN (Tire Identification Number) for a new tire (example: DOT XX XX XXX XXXX) 1. DOT: Abbreviation for the “ Depart- ment of T ransportation ” . The sym- bol can be placed above, below or to the left or right of the Tire Identification Number.
8-38 Maintenanc e and do-it-yourself bears white lettering or bears manu- facturer, brand and/or model name molding that is higher or deeper than the same molding on the other side- wall of the tire, or (2) the outward facing sidewall of an asymmetric al tire that has a particular side that must always face outward when mounted on a vehicle.
TIRE CHAINS GUID-72A4B18E-532D-4B95-B54 E-0D219FBB6687 Use of tire chains may be prohibited according to loca tion. Check the loca l laws before installing tire chains. When instal- ling tire chains, make sure they are the proper siz e for the tires on your vehicle and are installed according to the c hain man- ufacturer ’ s suggestions.
8-40 Maintenance and do-it-y ourself The wheel nuts must be kept tigh- tened to the specification at all times. It is recommended that wheel nuts be tightened to the specifica- tion at each tire rotation interval. WARNING . After rotating the tires, c hec k and adjust the tire pressure.
Replacing wheels and tires GUID-50D27E9A-C359-494D-A9B 1-ACD968EE6ABE When replacing a tire, use the same size, tread design, speed rating and load carry- ing capacity as originally equipped. (See “ Specifications ” (P . 9-8) for recommended types and sizes of tires and wheels.
8-42 Maintenance and do-it-y ourself placed with tires of the same size, brand, construction and tread pattern. The tire pressure and wheel alignment should also be check ed and corrected as necessary. Contact an INFINITI retailer. Wheel balance GUID-84CA0E50-F38 E-4E24-835 E-33BF7157AA2A Unbalanced wheels may affect vehicle handling and tire life.
. Because the TEMPORARY USE ONL Y spare tire is smaller than the original tire, ground clearance is reduced. T o avoid damage to the vehicle, do not drive over obstacles. Also do not drive the vehicle through an automatic car wash since it may get caught.
8-44 Maintenance and do-it-y ourself MEMO.
9 T ec hnical and c onsumer information Capacities and recommended fuel/lubricants ... ....... 9-2 Fuel recommendation ... ...................................... 9-4 Engine oil and oil filter recommendation ... ......... 9-6 Air conditioning system refrigerant and lubricant recommenda tions .
9-2 T echnical and consumer information GUID-48931BE6-8CB1 -42AD-9316-C84EE80464B2 The following are approximate capacities. The actual refill capacities may be a little differ ent. When refilling, follow the pro cedur e instructed in the “ 8. Maintenance and do-it-yourself ” section to determine the proper ref ill capacity .
*1: For additional information, see “ Engine oil ” (P .8-11) for changing engine oil. *2: INFINITI rec ommends Genuine NISS AN Ester Engine Oil available at INFINITI retailers.
9-4 T ec hnical and con sumer information FUEL RE C OMMENDA TION GUID-9FE4EF10-75DC-47EE-817B-C 3BE5AF491FA Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knoc k Index) number (Research octane number 96).
15%.) . E-15 fuel contains more than 10% oxygenate. E-15 fuel will adversely affect the emission control devices and syst ems of the vehicle and should not be used. Damage caused by such fuel is not covered by the INFINITI new vehicle limited warranty .
9-6 T ec hnical and con sumer information above symptoms are encoun tered, have your vehicle checked at an INFINITI retailer or other competent service facility. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills.
Oil whic h may cont ain foreign matter or has been previously used should not be used. Oil visc osity GUID-F3855EFB-B07A-438C-BCBB -413373B28445 The engine oil viscosity or thickness changes with temperature.
9-8 T ec hnical and con sumer information Contact an INFINITI retailer when servicing your air conditionin g system. GUID-9871FDBA-D97A-4878-B5F8-F 5BF185B27FF ENGINE GUID-CA2E3267-31C6-4935-A9C 5-1AD.
STI0397B VK50VE engine STI0425 VQ37VHR engine WHEELS AND TIRES GUID-D638F2F8-DA49 -4C08-83F 7-562AED633CC3 Road wheel GUID-CAE1A699-BCE5 -4A3E-8A71-5956FB428C41 Type Size Offset in (mm) Conventional 18 6 8J 1. 97 (50) 20 6 8J 21 6 9-1/2J Spare 18 6 4-1/2T 1.
9-10 T ec hnical and cons umer information DIMENSIONS GUID-2D600776-9DE1-495C-9B0 9-FD7C708BD79F Overall length (With front license plate) in (mm) 191. 3 (4,860) Overall width in (mm) 75. 9 (1,925) Overall height in (mm) 65.0 (1,650)*1 66.1 (1,680)*2 Front tread in (mm) 64.
GUID-2219A828-FF43-4C5E-87 27-2B7B70127420 If you plan to travel in another country, you should first find out if the fuel available is suitable for your vehicle ’ s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
9-12 T ec hnical and cons umer information STI0584 VK50VE engine STI0509 VQ37VHR engine ENGINE SERIAL NUMBER GUID-EE9E0254-9A46 -4729-A2D4-B56B1F343430 The number is stamped on the engine as shown.
STI0422 EMISSION CONTROL INFORMA TION LABEL GUID-272AD403-9633-4959-8 7B5-5695C542AF87 The emission control information label is attached as shown. STI0373 TIRE AND LOADING INFORMA TION LABEL GUID-658A04C7-A37F-4A12-AC6 4-F251B17B1022 The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated.
9-14 T ec hnical and cons umer information GUID-668278F1-1E9D-42E6-8C 9E-2CCF21C37E2B JVT0147X Use the following steps to mount the license plate. Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag.
5. Insert grommets into the hole on the fascia. 6. Insert a flat-blade screwdriver into the grommet hole to add 90 8 turn onto the part * E . 7. Insert a J-nut into the lice nse plate bracket before placing the lice nse plate bracket on the fascia. 8.
9-16 T ec hnical and cons umer information of the load (passengers and car- go) for the vehicle. This is the maximum com bined weight of occupants and c argo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be included as part of the cargo load.
VEHICLE L OAD CAP ACITY GUID-FB0AE9D8-2912- 40C9-99F6-E501B3AC2449 Do not exceed the load limit of your vehicle shown as “ The combined weight of occupants and cargo ” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “ Seating Capa- city ” on the Tire and Loading In- formation label.
9-18 T ec hnical and cons umer information SIC3849 SECURING THE L OAD GUID-F6084B6B-3E67-44EC-BE8D-E 9432D2288E3 There are tie down hooks located in the cargo area as shown. The tie down hooks can be used to secure cargo with ropes or other types of straps.
serious accident and personal in- jury. Failures caused by overload- ing are not cover ed by the vehicle ’ s warranty. MEASUREMENT OF WEIGHTS GUID-FF731B9F-26FE-4448-9DAA -A440EB7F1BB4 Secure loose items to prevent weight shifts that could affect the balance of your vehicle.
9-20 T echnical and consumer information STI0541 The GCWR equals the combined weight of the towing vehicle (including passengers and cargo) plus the total trailer load. T owing loads greater than these or using improper towing equipment could ad- versely affect vehicle handling, braking and performance.
STI0542 T ongue load GUID-C348277A-F1BA-42D0-95F 7-C6180E6D8C5A When using a weight carrying or a weight distributing hitch, keep the tongue load between 10 to 15% of the total trailer load within the maximum tongue load limits shown in the following “ Towing Load/ Specification ” c hart.
9-22 T echnical and consumer information available maximum tongue load. T o determine the available towing capacity , use the following proc edure. 1. Find the GCWR for your vehicle on the “ T owing Load/Specification ” chart found later in this section.
TOWING L OAD/SPECIFICA TION GUID-9DEAF7DC-13F1-4 5B3-AD70-83B558B3FB7B TOWING LOAD/SPECIFICA TION CHART Unit: lb (kg) VQ37VHR VK50VE Two-Wheel Drive (2WD) model All-Wheel Drive (AWD) model All-Wheel D.
9-24 T echnical and consumer information of the ball. . Choose the proper class hitch ball based on the trailer weight. . The diameter of the threaded shank of the hitch ball must be matc hed to the ball mount hole diameter. The hitc h ball shank should be no more than 1/16 smaller than the hole in the ball mount.
to the hitch, not to the vehicle bumper or axle. The safety chains can be attached to the bumper if the hitc h ball is mounted to the bumper. Be sure to leave enough slac k in the c hains to permit turning co rners.
9-26 T echnical and consumer information inadvertently becoming unlatc hed. . Avoid abrupt starts, acceleration or stops. . Avoid sharp turns or lane changes. . Always drive your vehicle at a moderate speed. Some states or province s have specific speed limits for vehicles that are towing trailers.
ling. If swaying does occur, firmly grip the steering wheel, steer straight ahead, and immediately (but gradually) reduce vehicle speed. This co mbination will help stabilize the vehicle. Never increase speed. Do the following if the trailer begins to sway: 1.
9-28 T echnical and consumer information . DO NOT tow an All-Wheel Drive (AWD) vehicle with any of the wheels on the ground. Doing so may ca use serious and expensive damage to the powertrain. . For emergency towing proc edures refer to “ T owing recommended by INFINITI ” (P .
tire failu re. The grade C corresponds to a level of performanc e which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
9-30 T echnical and consumer information GUID-A35A5D9A-E5FD-44 2E-B85E-832B378D5E4D For USA If you believe that your vehicle has a defect whic h c ould c ause a crash or could cause injury or death, you should immediately inform the Na- tional Highway T raffic Safety Admin- istration (NHTS A) in addition to notifying INFINITI.
GUID-C151B503-0A3 F-49A6-AEAC-8F28390506AF A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynam- ometers used by some states for emissions testing), or similar equipment.
9-32 T echnical and consumer information crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.
10 Index A ABS (Anti-lock Braking System) ... ......................... 5-82 Adaptive front lighting system (AFS) ... .................. 2-41 Adaptive shift control (ASC) ... .............................. 5-19 Advanced air bag system ... ............
10-2 Cargo light ... ....................................................... . 2-65 Cargo net ... .......................................................... 2-55 Catalytic converter, Three way catalyst ... ................ 5-3 CD/CF/USB memory care and cleaning .
If your vehicle overheats ... .............................. 6-12 Starting the engine ... ...................................... 5-14 Entry/exit function, Automatic drive positioner ... ... 3-32 Event Data Recorders (EDR) ... .........................
10-4 Lights ... .......................................................... 2-18 INFINITI Vehicle Immobilizer System ... .................. 2-32 INFINITI voice recognition system ... .................... 4-119 INFO button ... ..........................
Low washer fluid warning ... ................................. 2-25 Luggage hooks ... ................................................. 2-54 M Maintenance Battery ... .......................................... ............... 8-17 General maintenance .
10-6 Preview Function warning light ... .......................... 2-17 Push starting ... .................................................... 6-11 “ PUSH ” warning ... ............................................... 2-24 Push-button ignition switc h .
Rear Active Steer system ... ............................. 5-85 Steering-wheel-mounted controls for audio ... ...................................................... 4-91 Tilt/telescopic steering ... ................................. 3-27 Storage ... .
10-8 V ehicle Dimensions ... .................................................. 9-10 Identification number (VIN) ... .......................... 9-11 Loading information ... ..................................... 9-15 Recovery (freeing a stuck vehicle) .
MEMO 10-9.
11 Gas station information GUID-82EC6D6E-24CE -4796-8CB6-34CFC2CA3F26 FUEL RE C OMMENDA TION: GUID-6E0A95CF-9B9 0-42E5-963 A-62586B3D6FA4 Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knoc k Index) number (Research octane number 96).
2013 Infiniti FX Owner’s M anual Printing: June 2012 (12) / OM3E 0S51U0 / Printed in U.S.A. For y our safety , re ad car efully and keep in thi s vehic le.
Een belangrijk punt na aankoop van elk apparaat Infiniti FX35 (2013) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Infiniti FX35 (2013) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Infiniti FX35 (2013) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Infiniti FX35 (2013) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Infiniti FX35 (2013) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Infiniti FX35 (2013) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Infiniti FX35 (2013) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Infiniti FX35 (2013) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
