Gebruiksaanwijzing /service van het product SP-CEIL-012 van de fabrikant InFocus
Ga naar pagina of 14
IN-SPECEI L012.R2 INSTALLATION MANUAL SP-CEIL-012 InFocus Corpo ration 27700B S.W. Parkway Ave. Wilsonville, OR 97070-9215 1-800-294-6400 www.infocus.com.
PBL-110 Projector Mount Page - 2 - Installation Manual.
SP-CEIL-012 Installation Manual Page - 3 - Table of Contents Warning Statements ............................................................................................................. ............................... - 4 - Parts List ............
SP-CEIL-012 Page - 4 - Installation Manual Warning Statements WARNING: THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LE AST FIVE (5) TIMES THE WEIGHT OF THE PROJECTOR. IF NOT, TH E CEILING MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SE RVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHER ED TO.
SP-CEIL-012 Installation Manual Page - 5 - Parts List NOTE: This mount is shipped with all proper install ation hardware and components. Make sure that none of these parts are missing and/or damaged before be ginning installation.
SP-CEIL-012 Page - 6 - Installation Manual Ceiling and Wall Installation Unpack the Gyrolock ® and review any WARNING statements that apply to the installation. Select the desire d location for the Gyrolock ® . There are three mounting points for a single stud installation and four mounting points for a solid structure installation.
SP-CEIL-012 Installation Manual Page - 7 - Adjustable Height 1. Screw the fully threaded nipple all the way into th e secured top plate. Use the jam screw (supplied) to secure the pipe (Figure 2). 2. Screw the PBC coupling all the way onto the threaded nipple or (optional) 1-1/2" pipe and secure the M6 x 12 Phillip screw (Figure 3).
SP-CEIL-012 Page - 8 - Installation Manual Adjustments and Extension Arm SP-EXTARM-01 SP-EXTARM-02 SP-EXTARM-03 SP-EXTARM-04 Contact InFocus for extensions. Adjustments • Roll & pitch greater than ± 20 ° from center. • Quick positive release with positive security lock.
SP-CEIL-012 Installation Manual Page - 9 - Mount Installation 1. Invert the projector and place it on a soft and fl at surface. Locate the three (3) 6 (mm) mounting points found on the bottom of the projector. 2. Secure the mounting bracket using the three (3) 6 (mm) x 12 (mm) Phillip Head screws (supplied).
SP-CEIL-012 Page - 10 - Installation Manual 1. Install the two (2) conical spacers and two (2) flat washers two, (2) hinge pin screws loosely on both sides of the base box. 2. Raise the projector with the mounting bracket attached and slip though the hinge pin slots openings on the bracket into the base box.
SP-CEIL-012 Installation Manual Page - 11 - Troubleshooting Procedures QUESTION: My projector mount must be set at an angle to be viewed properly on the wall, but the projector will not hold at this position. Why is this? ANSWER: The angle adjustments are not tight; they must be tightened.
SP-CEIL-012 Page - 12 - Installation Manual Technical Specifications 4.50 4.50 6.75 6.00 Figure 5. Technical Dimensions.
SP-CEIL-012 Installation Manual Page - 13 - Warranty Limited Lifetime Warranty All products carry a limited lifetime warranty fr om ship date against defects in materials and workmanship. InFocus Corporation is not liable for improper installation that results in damage to mounts, adapters, dis play equipment or personal injury.
SP-CEIL-012 Page - 14 - Installation Manual IN-SPECEI L012.R2 Notes InFocus Corpo ration 27700B S.W. Parkway Ave. Wilsonville, OR 97070-9215 1-800-294-6400 www.
Een belangrijk punt na aankoop van elk apparaat InFocus SP-CEIL-012 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen InFocus SP-CEIL-012 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens InFocus SP-CEIL-012 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding InFocus SP-CEIL-012 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over InFocus SP-CEIL-012 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van InFocus SP-CEIL-012 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de InFocus SP-CEIL-012 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met InFocus SP-CEIL-012 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.