Gebruiksaanwijzing /service van het product TD40 NTSC van de fabrikant InFocus
Ga naar pagina of 53
TD32/TD40 NTSC USER’S GUIDE.
Contents 1 OWNER'S MANUAL Forewor d Caution ...................................................................................................................................... 3 Important Safety Information ....................................
Contents 2 OWNER'S MANUAL Setting the Pictur e Changing the Picture Mode .................................................................................................... 29 Adjusting the User Mode .............................................
3 OWNER'S MANUAL CAUTION - T O PREVENT DAMAGE WHICH MA Y RESUL T IN FIRE OR SHOCK HAZARD. - DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. - SHOCK HAZARD DO NOT OPEN. CAUTION These servicing instructions are for use by qualified service personnel only .
Caution 4 OWNER'S MANUAL Always be careful when using your the Monitor . T o reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions.
5 OWNER'S MANUAL Follow all operating and use instructions. Do not use the Monitor where contact with or immersion in water is a possibility , such as near bath tubs, sinks, washing machines, swimming pools, etc. When installing the Monitor on a table, be careful not to place it too close to the edge of the table.
Impor tant Safet y Information 6 OWNER'S MANUAL Provide ventilation for the Monitor . The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the Monitor on a bed, sofa, rug or other similar surface.
7 OWNER'S MANUAL Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor , be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFP A No.
Impor tant Safet y Information 8 OWNER'S MANUAL When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit.
9 OWNER'S MANUAL Select the signal source from multiple input sources such as TV , A V 1, A V 2, S-Video / A V , Component1, Component2, PC and DVI. To change the CHANNEL, Press button first and change the CHANNEL with , buttons. To change the VOLUME, Press button first and change the VOLUME with , buttons.
Viewing the Connecting Panel 10 OWNER'S MANUAL To control from PC. For PC, Set top box. PC/DVI Audio Input. For PC, Set top box. For DVD, Set top box. For Component Audio Input. To connect speakers (2CH, Stereo) For VCR, DVD, Set top box. For VCR, DVD, Set top box.
11 OWNER'S MANUAL 2 3 5 4 6 7 8 3 2 5 4 6 7 8 PC The Monitor 3-Wire (Non-standard) AUDIO INPUT COMPOSITE VIDEO INPUT COMPOSITE VIDEO OUTPUT S-VIDEO INPUT COMPONENT VIDEO INPUT ANALOG RGB INPUT DI.
Viewing the Remote Control 12 OWNER'S MANUAL Power T urn the Monitor on and off. Mute T emporarily cut the sound and restore it. Pre.CH T urn to the previous channel or exit OSD. V .Size Choose the Screen Form. Wide ➔ Panorama ➔ Zoom1 ➔ Zoom2 ➔ 4:3 FA VORITE (F A VOURITE) T une to your next favorite channel.
13 OWNER'S MANUAL MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono ➔ Stereo ➔ SAP • Y ou can select only available modes depending on the source. CH INFO Display the current information about time, screen form, source and MTS mode.
Viewing the Remote Control 14 OWNER'S MANUAL Source key : Change the source of the PIP window . The available sources are shown as below . Move key : Move the position of PIP window . Swap key : Swap the sources of the main screen and PIP window .
15 OWNER'S MANUAL Close the cover until it clicks. Load two AAA batteries, taking care that the + and - ends face the correct direction. Press on the cover and slide in the direction of the arrow .
Installation 16 OWNER'S MANUAL < The Monitor can be installed on the desk as shown above. > • T able Stand mount minimum allowable clearances for adequate ventilation. T able Stand Installation (Optional) 1.18 inch (3Cm) 2.36 inch (5.99Cm) 4 inch (10.
17 OWNER'S MANUAL • Be sure monitor power is turned off before making any connections. Place the speakers in the position you want. Install the speaker wires on the monitor and speaker . Be sure to connect the positive "+" wire to the "+" input and the negative "-" wire to the "-" input.
Connecting the T V Cable 18 OWNER'S MANUAL 1 2 3 4 Connecting the TV Cable Connect the TV antenna cable to the TV input jack. Press INPUT button on the remote control and select TV on OSD. Use CH+, CH- button or numeric button to change TV channel for your channel selection.
19 OWNER'S MANUAL Press INPUT button on the remote control and select V ideo Sources. Insert a video tape into the VCR and press the PLA Y button on the VCR. W ith S-V ideo Connect a S-Video cable to the S-V ideo jacks of the VCR and the Monitor .
Connecting the DVD 20 OWNER'S MANUAL T urn on the DVD player . Press INPUT button on the remote control of the Monitor and select Component1 or Component2. • Connect the three separate component video cables to the DVD player's Y , Pb and Pr jacks and to the Component jacks on the Monitor .
21 OWNER'S MANUAL T urn on the Set T op Box. Press INPUT button on the remote control of the Monitor and select Component1, Component2, PC or DVI. Connect Set T op Box video inputs to A V , COMPONENT , PC or DVI jacks on the Monitor . Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.
Connecting the PC (D-Sub & DVI) 22 OWNER'S MANUAL Pin Configuration 15Pin Signal Cable (based on protruded pin) To watch the PC screen T urn on the Monitor and press INPUT button to select the PC MODE. T urn on the PC and check for the PC requirements.
23 OWNER'S MANUAL 31.468 37.861 31.469 37.927 31.469 35.000 37.861 37.500 43.269 45.913 53.01 1 64.062 35.156 37.879 48.077 46.875 53.674 56.000 64.016 49.725 31.468 48.363 56.476 60.023 47.700 64.000 70.09 85.08 70.08 85.03 59.94 66.66 72.80 75.
Basic Operation 24 OWNER'S MANUAL Press the Power button on the remote control. The Monitor will turn on and you will be ready to use its features. Y ou can also use the Power button on the front panel. Press INPUT button on the remote control. Then you can see the source list menu shown as below .
25 OWNER'S MANUAL • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu. EXAMPLE of OSD Menu Main Menu Press Menu/Set button on the remote control to enter the main OSD menu.
Setting the Channel 26 OWNER'S MANUAL Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna, a standard cable system, an HRC, or an IRC). Press Menu/set button to display the main OSD menu.
27 OWNER'S MANUAL The Fine T uning function lets you manually adjust the Monitor's tuner if you have difficulty tuning analog Channels. Press Menu/set button to display the main OSD menu. Press Menu/set button to display the main OSD menu. Select the TV main menu item.
Setting the Channel 28 OWNER'S MANUAL a Set the favorite channel Y ou can store of your favorite channels for each available input source (such as TV or CA TV).
29 OWNER'S MANUAL Y our the Monitor has 3 automatic factory preset picture settings (“ Standard ”, “ V ivid ” and “ Mild ”). Y ou can choose Standard , V ivid or Mild by pressing “Picture” button on the remote control (or by making a selection from the menu).
Setting the Picture 30 OWNER'S MANUAL Picture Mode is to set CH+ or adjust Picture Adjust, Mode, Video Noise Reduction, Screen Format and Burn Protection. Adjust USER Mode Y ou can change the Contrast, Brightness, Color , and Sharpness according to personal preference in USER mode.
31 OWNER'S MANUAL Contrast Adjust brightness difference between bright part of the screen and dark part. Brightness Adjust brightness of the screen. Color Adjust deep and light color of the screen. T int Adjusts the balance between green and yellow .
Setting the Picture 32 OWNER'S MANUAL Y our the Monitor has 5 screen temperatures (color settings): Press Menu/set button to display the main OSD menu. Select the picture main menu. Press Menu/Set to enter the picture menu. Select T emperature and press Menu/Set to enter the sub menu.
33 OWNER'S MANUAL This function automatically filters out and reduces the image noise and improves picture quality where receiving weak signals. Press Menu/Set button to display the main OSD menu. Select the picture main menu item. Press Menu/Set to enter the sub menu.
Setting the Picture 34 OWNER'S MANUAL Screen Format Description W ide Wide video: No change. 4:3 video: Expands 4:3 video signal horizontally to fit the Wide screen. Panorama Wide video: No change. 4:3 video: Expands 4:3 video horizontally to fit the Wide screen and to minimize distortion, sides are expanded more than center .
35 OWNER'S MANUAL In PC mode, you can adjust the H, V -Position, Native Mode and Phase. Also you can adjust them automatically . Y ou can change H, V -Position, Native Mode and Phase in PC mode like usual PC monitors. Yo u can also adjust them automatically .
Setting the Picture ( PC ) 36 OWNER'S MANUAL H-POSITION V -POSITION PHASE Mismatch Match.
37 OWNER'S MANUAL Y our the Monitor has four automatic sound settings ("Standard", "Movie", "Music" and "News") that are preset at the factory .
Setting the Sound 38 OWNER'S MANUAL Y ou can use the OSD menu to change the T reble, Bass, Balance and DRC according to your preference. Equalizer menu appear when you select USER mode. Select a gain bar with VOL+, VOL- button on the remote control and adjust it with CH+/CH- button.
39 OWNER'S MANUAL This function adjust sound volume level automatically depending on the source. Press Menu/set button to display the main OSD menu. Select the SOUND main menu. Press Menu/Set to enter the sub menu. Select AV C and press VOL+ button to enter the ¥ parts.
Setting the Others 40 OWNER'S MANUAL Adjust the transparency of the OSD menu. There are 8 step from OFF to 7. Press Menu/set button to display the main OSD menu. Select the SET UP main menu with CH+/CH- button on the remote control. Press Menu/Set to enter the sub menu.
41 OWNER'S MANUAL SMALL LARGE TWIN Source in PIP Change the source of the PIP window . Select Source and press Menu/Set to enter the sub menu. Then the PIP sub menu appear . The available sources will be displayed. Select the source and press Menu/Set button.
Setting the Others 42 OWNER'S MANUAL Position in PIP Change the position of the PIP window . Select Position with CH+/CH- button on the remote control and press Menu/Set to enter the sub menu. Then the PIP sub menu appear . In Sub Menu, there are four positions.
43 OWNER'S MANUAL Set ID in Advanced Set the ID of the Monitor for mass-controlling through the serial port. Select Set ID and press VOL+ button to enter the ¥ part. Then the cursor moves into the ¥ part. Adjust with CH+ / CH- button and press BACK button.
Setting the Others 44 OWNER'S MANUAL Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating. Press Menu/set button to display the main OSD menu. Select the SET UP main menu with CH+/CH- button on the remote control.
45 OWNER'S MANUAL TV Blocking in V -Chip Y ou can set up Restrictions Using the "TV Parental Guidelines" of FCC. Select TV Blocking with CH+/CH- button on the remote control and press Menu/Set to enter the sub menu. Then the TV Blocking sub menu appear .
Setting the Others 46 OWNER'S MANUAL Change Password in V -Chip Select Change Password with CH+/CH- button on the remote control and press Menu/Set to enter the sub menu. Then the Pass W ord change sub menu appear . Enter the new password with numeric buttons on the remote control.
47 OWNER'S MANUAL In the TIME menu, you can set the current time and auto power on / off. Set the current time. Press Menu/set button to display the main OSD menu. Select the TIME main menu. Press Menu/Set to enter the sub menu. Select T ime Set by pressing VOL+ button.
Setting the Time 48 OWNER'S MANUAL Set the channel when the Monitor power turn on automatically . • Available only when the T ime is set and On Time is ON. Press Menu/set button to display the main OSD menu. Select the TIME main menu with CH+/CH- button on the remote control.
49 OWNER'S MANUAL This the Monitor can be set to turn off automatically at specific times that you choose. Before using the timer , you must set the Monitor's clock as described previously . Press Menu/set button to display the main OSD menu.
Troubleshooting 50 OWNER'S MANUAL If your monitor is not working properly , please scan this list of problems and possible solutions. It may save you time and money .
51 OWNER'S MANUAL Warrant y Card Limited W arranty Subject to the Limitations, Exclusions and Disclaimers hereof, InFocus Corporation ("InFocus") warrants that the LCD Thin Display Devi.
Warrant y Card 52 OWNER'S MANUAL Limited W arranty Period The Limited W arranty periods hereof commence on the date of purchase by the end-user customer .
Een belangrijk punt na aankoop van elk apparaat InFocus TD40 NTSC (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen InFocus TD40 NTSC heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens InFocus TD40 NTSC vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding InFocus TD40 NTSC leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over InFocus TD40 NTSC krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van InFocus TD40 NTSC bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de InFocus TD40 NTSC kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met InFocus TD40 NTSC . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
