Gebruiksaanwijzing /service van het product DSR-7.3 van de fabrikant Integra
Ga naar pagina of 88
D VD Receiv er DSR-7.3 Instr uction Manual Thank y ou f or purchasing the Integr a D VD Receiv er . Please read this m anual thoroughly bef ore making connections and turning on the pow er . Follo wing the instr uctions in this m anual will enable you to obtain optim um perf or m ance and listening enjoyment fr om y our new D VD Receiv er .
2 Important Safety Instructions 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference.
3 Pr ecautions For Canadian model This class B digital apparatus complies with Canadian ICES-003. For models having a po wer cord with a polarized plug: CA UTION: TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLOT , FULL Y INSERT .
4 D ANGER : VISIBLE AND INVISIBLE LASER RADIA TION WHEN OPEN AND INTERLOCK F AILED OR DEFEA TED. DO NOT ST ARE INTO BEAM. CA UTION : THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MA Y RESUL T IN HAZARDOUS RADIA TION EXPOSURE.
5 T able of Contents Important Safeguards/Precautions/T able of Contents .................................... 2/3/5 Getting Started Features ..............................................................................................................
6 F eatur es Memory Preser v ation This unit does not require memory preservation batteries. A built-in memory power backup system preserves the contents of memory during power failures and even when the power cord is unplugged. The power cord must be plugged in order to charge the backups system.
7 Supplied Accessories Make sure your box contains everything listed below . If any pieces are missing, contact your nearest Integra/Onkyo dealer . The number of accessories is indicated in brackets. S video connection cable [1] Cable which sends S- video images.
8 This section shows y ou how to handle, clean, and store discs. Notes on Discs Disc mark D VD videos Pla y able Discs This DVD Receiver can playback the following discs. • Y ou cannot playback discs other than those listed above. • Y ou cannot play discs such as DVD-RAM, DVD-RW , DVD- Audio, Photo CD, CD-G etc.
9 Playback side Cleaning Discs • Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean. • If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.
10 Index to P arts and Contr ols For operational instructions, refer to the page indicated in brackets. ■ Front panel 1 Standby/On b utton, On, Standb y indicators [24] When Standby/On button is pressed to On, the DVD Receiver turns on. The Standby indicator turns of f, and the On indicator and the display lights up.
11 ■ Display 1 Multipurpose displa y 2 TITLE, CHP indicators [52, 56, 64, 65] Indicate display mode of the current title or chapter of DVD. 3 Inserted disc indicator [29] Indicates the type of current disc that is loaded. 4 £ , 8 indicators [29] Lights up in play or pause mode.
12 Remote controller T o control the D VD receiver , press Mode D VD or Mode Recvr first. Press Mode DVD to operate the D VD section, or Mode Recvr to operate the receiver section. Functions of grayed b uttons in the illustration vary depending on the mode.
13 % A udio button [61] Press repeatedly to select one of the audio languages programmed on a DVD. For Video CD and MP3, each press changes the audio output as follows. → Stereo → 1/L(Left) → 2/R(Right) ^ Angle button [63] Some DVDs are recorded with various camera angle playback options.
14 Shapes of jacks vary depending on the area in which it was purchased. 1 SUB WOOFER PRE OUT jack [17, 18] This terminal is for connecting an active subwoofer . 2 TV/LINE IN jacks [16,19] This terminal is for connecting audio output terminals of TV , VCR or other video equipment.
15 Pr eparing the Remote Contr oller Inser ting the Batteries 1 Detach the battery cover . 2 Insert the two size AA/R6/UM3 batteries. Be sure to match the + and – ends of the batteries with the diagram inside the battery compartment. 3 Attach the battery co ver .
16 Connecting to a TV Before connecting • Refer also to the instruction manual of the TV . • When you connect the DVD Receiver to the TV , be sure to turn off the power and unplug both the units from the socket before making any connections. • Connect the DVD Receiver to the TV directly .
17 AC INLET PREOUT SUB WOOFER TV/LINE MD/CDR/TAPE DIGITAL OPTICAL AUDIO REMOTE CONTROL AM FM 75 SURROUND SPEAKERS FRONT SPEAKERS CENTER R L IN IN IN OUT L R R L OUT ANTENNA VIDEO OUTPUT S VIDEO VIDEO .
18 P ositioning Speakers ■ Standard speaker placement of the speaker s system Speaker placement plays an important role in the reproduction of Surround sound. The placement of the speakers varies depending on the size of the room and the wall coverings used in the room.
19 Cassette T ape Deck, MD Recor der , CD Recorder , etc. A udio connection cable Signal flow Optical fiber cable AC INLET PREOUT SUB WOOFER TV/LINE MD/CDR/TAPE DIGITAL OPTICAL AUDIO REMOTE CONTROL AM.
20 20 z Connection f or the Integra/Onk y o Cassette T ape Deck, CD Recorder or MD Recorder The z terminal on the DVD Receiver is for connecting Integra/Onkyo MD recorder , CD recorder or Cassette tape deck equipped with the same z terminal.
21 21 Operating Components not Reached by the Remote Contr oller Signals (IR IN) In order to use the remote contr oller to control the D VD Receiver from a remote location, you will need to prepare a multi-r oom kit (sold seperately) such as one if those given below: IR IN DSR-7.
22 22 AC INLET PREOUT SUB WOOFER TV/LINE MD/CDR/TAPE DIGITAL OPTICAL AUDIO REMOTE CONTROL AM FM 75 SURROUND SPEAKERS FRONT SPEAKERS CENTER R L IN IN IN OUT L R R L OUT ANTENNA VIDEO OUTPUT S VIDEO VID.
23 23 AM FM 75 ANTENNA Connecting an FM Outdoor Antenna If the FM reception is not very clear with the supplied antenna, connect an FM outdoor antenna instead of the indoor FM antenna . Notes • Install the antenna well away from tall buildings and in an area where FM stations can directly be received.
24 24 Connecting the P ower/ T ur ning on the D VD Receiv er Before connecting • Make sure that all the connections from pages 16 to 23 are complete (the connection to the TV is required). • T urning on the DVD Receiver may cause a momentary power surge, which might interfere with other electrical equipment such as computers.
25 25 ■ T urning the unit on/off with the TV’ s power switch — IPM function The DVD Receiver is equipped with the Intelligent Power Management (IPM) system. Just turn on your TV’ s power switch and, in about 5 seconds, the DVD Receiver turns on automatically .
26 26 Speaker Setup Y ou need to set up the speaker configuration for the speaker system connected to the SPEAKERS connectors (see page 17). Notes • Speaker setup cannot be done if; – Headphones a.
27 27 Press Distance. The distance entry display for the front left and right speakers appears. Press Up/Down 5 / ∞ to select the fr ont left and right speaker distance. Y ou can select a distance between 1 ft. and 30 ft. (0.3 m and 9 m). Press CH Sel, then press Up/Down 5 / ∞ repeatedly to select the center speaker distance.
28 28 2 Adjusting Each Speaker's Relative V olume Balance – T est T one Adjust each speaker ’ s relative volume balance so that the volumes of all speakers ’ test tones sound equal at the listening position. Note Y ou cannot adjust the volume balance while the muting function is activated.
29 29 DVD VCD CD MP3 1 2 3 Playing D VDs, Video CDs, CDs and MP3s Getting Started Using Y our D VD Receiv er Before y ou can star t to enjoy the digital audio and video on D VDs, be sure that you have.
30 30 Getting Started Using Y our D VD Receiver SETUP ENTER General V2 Language Video1 Exit Move Select Setup using the Setup Navigator Setup Navigator Setup Navigator Start Auto Start Off The Setup Navigator has been designed to simplify the process of getting the DVD Receiver ready to perform.
31 31 General V2 Language Video1 Exit Move Select Select the On Screen Language Setup Navigator OSD Language Language English français Deutsch Italiano Español SETUP ENTER ■ Setting the OSD Langua.
32 Getting Started Using Y our D VD Receiver When a Menu Screen is Displa yed Menu screens are displayed for DVDs that have menu screens or Video CDs that include Playback Control (PBC).
33 Chapter (T rack) Skip Forwar d/Skip Back Advancing to the next chapter (track) Press ¢ . Press to skip forward to the next chapter (track). Skipping back to the previous chapter (track) Press 4 . • Press once to skip back to the start of the chapter (track) currently playing.
34 Stopping Pla yback and Switc hing P ower Off Press Stop on the unit or 7 on the remote contr oller . Playback stops. Press Open/Close/ 0 on the Remote contr oller or Open/Close on the unit. The disc tray comes out. Remove the disc. Press Standb y on the remote contr oller or Standby/On on the unit.
35 1 2 Listening to the Radio There are two wa ys to select radio stations: • Manual tuning • Presetting radio stations then selecting the preset channels Unit T uning in a weak frequency (only f or FM stations) When you tune in a stereo FM station, the FM STEREO indicator lights up if the signal is sufficiently strong.
36 Listening to the Radio Naming a Preset Station Y ou can name the preset stations so that the name, instead of the frequency , appears on the display when you select the station. The following 52 characters can be used: (space) ABCDEFGHIJKLMNOPQUSTUVWXYZ ” ’ &()[ ]*+,-.
37 1 Erasing a Preset Station Enjo ying the Sound Effects While Listening to Radio Pr ograms See page 46. V arious Functions While Listening to Radio Pr ograms T o use the following functions, see page 40.
38 Playing the Connected Sour ce This section shows y ou how to pla y the sources connected to the D VD Receiver . Y ou may need to see “ Connecting to a TV ” on pages 16 and “ Connecting to Audio/Video Equipment ” on page 19 while follo wing the steps in this section.
39 Operating the Integra/Onky o Cassette T ape Dec k/MD Recorder/CD Recor der With the Supplied Remote Contr oller Operating the Integra/Onky o cassette tape deck, MD recorder or CD recor der to the DVD Receiver with the z cable (see pa g e 20) Point the remote controller toward the DVD Receiver when you want to operate this equipment.
40 V arious Functions Common to all the Sour ces Adjusting the V olume The volume of the front left and right, center , surround left and right, and subwoofer speakers will be adjusted at the same time. When headphones are connected, you can adjust the volume of the sound through the headphones.
41 Using the T imer Functions 1 Setting the current date and time 5 Start the clock. Match the date, time etc. then press ENTER. The display switches back to the function. ■ Displaying the current time Press Clock on the remote controller . If the clock is not set, “ ADJUST ” flashes.
42 Using the T imer Functions T ypes of timers SLEEP: Puts the system into standby mode at the preset time. The sleep timer is activated by the Sleep button. (Playbac k) ONCE: Activates only once after setting. WEEKDA Y : Activates playback timer during weekdays (mon-fri).
43 Presetting the playbac k timer For FM, AM timer playbac k, fir st preset the radio stations (page 35). Caution If the current time is not set, you cannot preset the playback timer . 4 S e n d O n S t a n d b y O p e n / C l o s e 2 T - D Setup IPM SW Mode Distance T - D/ ST A - B Surround A.
44 Using the T imer Functions Setting the recor d timer Be sure to preset FM and AM stations bef orehand (page 35). Caution • If the current time is not set, you cannot preset the playback timer make sure that the current time is set. • Except for EVERY , all record timers record only once.
45 Switching the timer on or off • Use when you want to cancel an active timer setting, reset a canceled timer , or when you want to revise a record timer . • If the current time is not set, you cannot preset the timer . Repeatedly press Timer to select the desired timer type.
46 Enjoying the Sound Effects The surround sound of the DVD Receiver enables you to enjoy the presence of a movie theater or concert hall in your room. Before using any sound effect, make sure the Speaker Setup configurations have been set (see pages 26-28).
47 PCM 96kHz other 2/0 other STEREO ××× × × THEA TER-DIMENSIONAL ×× × × DOLBY DIGIT AL × DTS × PL II MOVIE/PL II MUSIC ×× ORCHESTRA × UNPLUGGED × STUDIO-MIX × TV LOGIC × ALL CH ST × .
48 Enjoying the Sound Effects See “ The Input Sources and Available Listening Modes ” on page 47. 1 Theater-Dimensional indicator Stereo/Theater-Dimensional S e n d O n S t a n d b y O p e n / C l o s e 2 T - D Setup IPM SW Mode Distance T - D/ ST A - B Surround A.
49 Using Dolby Pr o Logic II/ Integra ’ s Original DSP Modes See “ The Input Sources and Available Listening Modes ” on page 47. Remote controller Changing the Sound to Stereo See “ The Input Sources and Available Listening Modes ” on page 47.
50 Enjoying the Sound Effects 2 1 Adjusting Each Speaker ’ s Relative V olume Balance T emporarily Y ou can readjust each speaker ’ s relative volume balance according to your preference while listening to the sound.
51 Remote controller only → Boosting the Super Bass Sounds/High Frequency Sounds Y ou can enjoy more dynamic sounds by boosting the super bass/high frequency sounds, even with decreased volume. Using the LA TE NIGHT Function • The LA TE NIGHT function operates when the sound is DOLBY DIGIT AL Surround.
52 Locating a Specif ic T itle/F older/ Chapter/T rack/Location Sear ching f or a Title , Folder , Chapter , T rack, or Location on a Disc DVD VCD CD MP3 This DVD Receiver offers different ways of accessing the information on a DVD, Video CD, CD or MP3.
53 S e n d O n S t a n d b y O p e n / C l o s e 2 T - D Setup IPM SW Mode Distance T - D/ ST A - B Surround A.Control -- / --- M o d e Enter Repeat Muting Up/ Down SP Setup Test Tone CH Sel RC - 507 .
54 Y ou can repeat an entire title, folder , chapter or track, or just a part. Repeat Play S e n d O n S t a n d b y O p e n / C l o s e 2 T - D Setup IPM SW Mode Distance T - D/ ST A - B Surround A.
55 Still Frame/Slow Play The video images on D VD and Video CD can be viewed as a still frame, played bac k at slow speeds and even advanced frame b y frame . S e n d O n S t a n d b y O p e n / C l o s e 2 T - D Setup IPM SW Mode Distance T - D/ ST A - B Surround A.
56 The titles and chapter s within a title on a DVD and similarly MP3, CD and Video CD tracks can be arranged to play in the or der you want. With this D VD receiver , it is possib le to make a program as y ou watch a DVD or Video CD or while listening to an MP3 or a CD .
57 Exit Move Current: T itle T itle Program Memory On 7 1 Chapter (Chapter 1~18) 1 Program Chapter Program T itle Off PROGRAM ENTER Select ■ T o save a pr ogram in memory This DVD Receiver can memorize the programs on up to 24 DVDs.
58 Playing in a F a vorite Order A program with a maximum of 24 steps can be memorized. Press Program to enter the [MP3 Program] screen. If you added tracks to the program list from the “ Using the MP3 navigator ” on page 53, the tracks are displayed here.
59 ■ T o delete a number 1 Press Program. 2 Use the cursor buttons ( 5 / ∞ / 2 / 3 ) to highlight the incorrect number and then press Clear . The number is deleted. If the number was before another number , the later numbers are reordered automatically .
60 Play titles, chapters, or tracks on a disc in random or der . S e n d O n S t a n d b y O p e n / C l o s e 2 T - D Setup IPM SW Mode Distance T - D/ ST A - B Surround A.
61 Changing the A udio Language (Multi- Language Function) Dolby Digital, PCM, and other audio data can be recorded on DVDs in a number of languages or audio tracks, letting you choose the desired language or audio. Press A udio repeatedly to select the desired language.
62 Memorizing a Last Memory location to return to later Press Last M during play . The “ LAST ” indicator lights on the DVD receiver . Press Standby to turn the po wer to standby , or stop playbac k with 7 . Once memorized, the memorized point will be recalled even if the power is turned off, or if the disc is ejected.
63 Selecting the Camera Angle S e n d O n S t a n d b y O p e n / C l o s e 2 T - D Setup IPM SW Mode Distance T - D/ ST A - B Surround A.Control -- / --- M o d e Enter Repeat Muting Up/ Down SP Setup.
64 CD Play T rack 3 0.03 3.32 – 3.29/ Play All 1/10 1.13 66.32 – 66.20/ « « Press Display during while a disc is playing. Press Display repeatedl y to change the information being display ed. The disc information is displayed superimposed over the video image on the screen.
65 S e n d O n S t a n d b y O p e n / C l o s e 2 T - D Setup IPM SW Mode Distance T - D/ ST A - B Surround A.Control -- / --- M o d e Enter Repeat Muting Up/ Down SP Setup Test Tone CH Sel RC - 507 .
66 Customizing the Function Settings Example The procedure on this pa ge describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered thr oughout this manual.
67 Changing to the Setup Screen “ Exper t ” Menu Mode The Setup screen menus are divided into two levels, [Basic] and [Expert], to make this unit more convenient to operate for different levels of users.
68 Customizing the Function Settings The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and high-definition TVs is 16:9.
69 — — — — Video1 Language General V2 Exit Move TV Screen Component Video S-Video Out Screen Saver 16:9(Wide) S1 S2 On SETUP Settings: S1 S2 (Factory Setting) ■ T urning the Screen Saver On .
70 Customizing the Function Settings ■ Adjusting the picture quality settings – T o create y our own setting (1) 1 Use the cursor button ( 3 ) to select [Start] then press ENTER. Interlace Video Memory Select Interlace Video Setup 2 Use the cursor button ( ∞ ) to select [V ideo Setup] then press ENTER.
71 DISPLA Y ENTER Prog. Memory Move Select Off 1 2 3 Check ■ Adjusting the picture quality settings – T o create y our own setting (2) 1 Use the cursor button ( 3 ) to select [Start] then press ENTER.
72 Customizing the Function Settings ■ Changing the Bac kground of the Screen Y ou can select a background to appear when the DVD Receiver is in the stop mode.
73 ■ Selecting a subtitle language preference The subtitle language that you will normally display can be selected from the subtitles programmed on a disc. Even when the subtitle language is changed during playback by pressing Subtitle, the language selected at this setting will be selected when the disc is changed.
74 Customizing the Function Settings Setting the Language Options ■ Selecting a D VD menu langua ge preference Expert In addition to containing different audio languages, DVD may also contain menu screens in different languages as well.
75 Language Code List Language codes are used when setting the audio and subtitle 5-language preferences (pages 73-74). Japanese (ja) English (en) French (fr) German (de) Italian (it) Spanish (es) Chi.
76 Customizing the Function Settings This DVD receiver lets you set the Parental Lock if the DVD has a parental lock level recorded on it. With Parental Lock capable discs, you can block access to material you feel is inappropriate for your children.
77 Country Code List ARGENTINA AUSTRALIA AUSTRIA BELGIUM BRAZIL CANADA CHILE CHINA DENMARK FINLAND FRANCE GERMANY HONG KONG INDIA INDONESIA IT AL Y JAP AN KOREA, REPUBLIC OF MALA YSIA MEXICO NETHERLAN.
78 Contr olling a TV connected to the D VD Receiv er Caution With some brand ’ s components, some buttons may not work correctly . In this case, program the command separately . 1 2 By learning a pre-programming code, you can make the RC-507M remote controller able to operate a product from another brand.
79 1 2 T V Controlling TV Press the Mode TV button. The TV button lights green. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control your television. The buttons given belo w have operations programmed into them.
80 Recording Using the Connected Equipment Y ou can record according to the following using the connected recording equipment: • Sound/picture of discs played back by the DVD Receiver , • Sound of FM/AM programs, and • Sound/picture of the connected source.
81 Causes • The power cord is disconnected. • The power cord has slipped out of the unit's AC INLET . • There is external noise interfering with the computer circuits of the DVD Receiver . • The muting function is activated. • The DVD Receiver is not properly connected.
82 T roubleshooting Causes • The DVD Receiver is in repeat playback mode, memory playback mode, or random playback mode, etc. • Power supply fluctuations or other abnormalities such as static electricity may interrupt correct operation. • The selected function does not operate for that disc.
83 Remedies • Switch the frequency receiving mode to mono. • Adjust the position, height, and direction of the FM antenna. • Connect an FM outdoor antenna. T ry to use an antenna with more elements. (For installation of the outdoor antenna, consult your nearest dealer as it requires special skills and experience.
84 Specif ications AMPLIFIER SECTION P ower Output (FTC) All channels 25 watts per c hannel min. RMS. into 6 ohms two channel driven, 1,000 Hz with no more than 10% total harmonic distortion. Continuous po wer output (DIN) All channels 21 watts per channel min.
85.
86.
87.
Printed in Japan W0207-1 Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div.
Een belangrijk punt na aankoop van elk apparaat Integra DSR-7.3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Integra DSR-7.3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Integra DSR-7.3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Integra DSR-7.3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Integra DSR-7.3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Integra DSR-7.3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Integra DSR-7.3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Integra DSR-7.3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
