Gebruiksaanwijzing /service van het product EMX-965GME van de fabrikant Intel
Ga naar pagina of 43
EMX-965GME Intel® GME965 socket 479P Core Duo / Core Solo/Core 2 Duo Mini ITX Main Board User’s Manual Ver. 1.00.
EMX-965GME 2 Contents Safety Information .......................................................................................................... 4 Technical Support ...................................................................................
User’s Manual EMX-965GME 3 Contents 1.8 Connectors .............................................................................................................. 33 1.8.1 Rear Panel Connectors ........................................................
EMX-965GME 4 Safety Information Electrical safety z To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. z When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
User’s Manual EMX-965GME 5 Technical Support If a problem arises with your system and no solution can be obtain ed from the user’s manual, please contact your place of purchase or local distributor. Alte rnatively, please try the following help resources for further gui dance.
EMX-965GME 6 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 9 1 x Intel GME965 Mini ITX Main board 9 1 x CD-ROM contains t.
User’s Manual EMX-965GME 7 Revision History Revision Revision History Date V 1.0 First release for PCB 1.00 October 02, 2007.
EMX-965GME 8 Specifications Summary 1 Supports Intel socket P Core 2 Duo / Core Duo / Core 2 Solo / Core Solo mobil CPU with 65nm process technolo gy 2 Intel GME965 Chipse t 3 Two 200-pin SODIMMs sockets up to 4GB Dual Channel DDR2 533/667 SDRAM 4 Intel Graphics Media Accelerator X3100 5 DVI, Dual 18/24-bit LVDS 6 Realtek ALC888 5.
User’s Manual EMX-965GME 9 Specifications Summary I/O Internal I/O 3 x USB connectors supp ort additional 6 USB port s 1 x 20-pin ATX Power connector,1 x ID E 40-pin connecto r for two devices 2 x C.
EMX-965GME 10 Block Diagram.
User’s Manual EMX-965GME 11 This chapter describes the main board features and the new technologies it supports. 1 Product introduction 1 Product introduction.
EMX-965GME 12 Production Introduction 1.1 Before you Proceed Take note of the following pr ecautions before you install motherboard components or change any motherboard settings. z Unplug the power cord from the wall socket before touching any component.
User’s Manual EMX-965GME 13 1.2 Motherboard Overview Before you install the motherboar d, study the configuration of your chassis to ensure that the motherboard fits into it. Refer to the chassis documentat ion before installing the motherboard. Make sure to unplug the power cord before installing or removing the motherboard.
EMX-965GME 14 1.3 Motherboard Layout.
User’s Manual EMX-965GME 15 1.3.1 Layout Content List Slots Label Function Note Page CF1A Compact Flash connector (Rear side) N/A SO-DIMM1 200-pin SODIMM slot 1 N/A SO-DIMM2 200-pin SODIMM slot 2 N/A PCI1 PCI slot N/A Jumpers Label Function Note Page CCMOS1 Clear CMOS 3 x 1 header, pitch 2.
EMX-965GME 16 Internal Connector Label Function Note Page AMPJ1 Amplifier connector 4 x 1 header, pitch 2.54mm 35 ATXPWR1 ATX power connector 10 x 2 header 35 COM3 Serial port 3 connector 5 x 2 header, pitch 2.54mm 36 COM4 Serial port 4 connector 5 x 2 header, pitch 2.
User’s Manual EMX-965GME 17 1.4 Central Processing Unit (CPU) The motherboard comes with a surface mount 478-pin designed for the Intel® socket 479P Core Duo / Core Solo / Core 2 Duo CPU with 65nm process. Take one of the marked corner (with gold triangle) on the CPU.
EMX-965GME 18 1.4.1 Installing the CPU 1. Locate the CPU socket on the motherboard. Before installing the CPU, make sure that the socket box is facing towards you. 2. The processor socket comes with a screw to secure the processor, please unlock the screw first.
User’s Manual EMX-965GME 19 3. Position the CPU above the socket and the gold triangular mark on the CPU must align with pin 1 of the CPU socket. 4. Carefully insert the CPU into the socket until it fits in place ‘Gold mark’. 5. Turn the screw to the lock position.
EMX-965GME 20 1.4.2 Installing the CP U Heatsink and Fan The Intel® socket 479P Core Duo / Core So lo / Core 2 Duo CPU processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. z Install the motherboard to the ch assis before you install the CPU fan and heatsink assembly.
User’s Manual EMX-965GME 21 2. Push down two fasten ers at a time in a diagonal sequence to secure the heatsink and fan assembly in place. 3. Connect the CPU fan cable to the connector on the motherboard labelled CPU_FAN1 . z Do not forget to connect the f an cables to the fan connectors.
EMX-965GME 22 1.4.3 Uninstalling the CPU Heatsink and Fan 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard 4.
User’s Manual EMX-965GME 23 1.5 System Memory 1.5.1 DIMM Sockets Location The motherboard comes with two 200-pin Double Data Rate 2 (DDR2) SODIMM sockets. A DDR2 module has the same physical dim ensions as a DDR DIMM but has a 200-pin footprint compared to the 184-pin DDR DIMM.
EMX-965GME 24 1.5.2 Memory Configurations You can install 128 MB, 256 MB, 512 MB, 1GB and 2GB DDR2 SDRAM DIMMs into the SODIMM sockets using the memory c onfigurations in this section. z Installing DDR2 DIMM ot her than the recommended configurations may cause memory sizing error or system boot failure.
User’s Manual EMX-965GME 25 1.5.3 Installing a DDR2 DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the mo therboard and the components. 1. Locate the DIMM so cket on the board.
EMX-965GME 26 1.5.4 Removing a DDR2 DIMM 1. Press the two ejector tabs on the slot out ward simultaneously, and then pull out the DIMM module. Support the DIMM lightly with your fingers when pressing the ejector tabs. The DIMM might get damaged when it flips out with extra force.
User’s Manual EMX-965GME 27 1.6 Expansion Slots In the future, you may need to insta ll expansion cards. The following sub ‑ sections describe the slots and the expansion cards that they support. Make sure to unplug the power co rd before adding or removing expansion cards.
EMX-965GME 28 1.6.3 Standard Interrupt Assignments IRQ Priority Standard Function 0 1 System Timer 1 2 Keyboard Controller 2 - Redirect to IRQ#9 3 11 IRQ holder for PCI streering* 4 12 Communications .
User’s Manual EMX-965GME 29 1.7 Jumpers 1.7.1 Clear CMOS (CCMOS1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, ti me, and system setup parameters by erasing the CMOS RTC RAM data.
EMX-965GME 30 1.7.2 COM1 RI/+5V/+12V Sel ection (JCOMPWR1, JCOMPWR2) JCOMPWR1 JCOMP WR2 +5V (Default) + +12V + Ring + 1.7.3 COM2 RI/+5V/+12V Sel ection (JCOMPWR1, JCOMPWR2) JCOMPWR1 JCOMP WR2 +5V + (D.
User’s Manual EMX-965GME 31 1.7.4 COM3 RI/+5V/+12V Sel ection (JCOMPWR3, JCOMPWR4) JCOMPWR3 JCOMP WR4 +5V (Default) + +12V + Ring + 1.7.5 COM4 RI/+5V/+12V Sel ection (JCOMPWR3, JCOMPWR4) JCOMPWR3 JC.
EMX-965GME 32 1.7.6 SM Power Connector (SM_PWRBTN1) ATX Mode (Default) AT Mode.
User’s Manual EMX-965GME 33 1.8 Connectors 1.8.1 Rear Panel Connectors No Label Function Description 1 KBMS1 PS/2 mouse connector The st andard PS/2 mouse DIN connector is for a PS/2 mouse.
EMX-965GME 34 No Label Function Description 6 AUDIO1 Line-In port (Light Blue). This port connects a tape, CD, DVD player, or other audio sources. 7 AUDIO1 Line-Out port (Lime) This port connects a headphone or a speaker. In 4-channel, 6-channel, and 8-channel configuration, the functi on of this port becomes Front Speaker Out.
User’s Manual EMX-965GME 35 1.8.2 Amplifier Connector (AMPJ1) 1.8.3 ATX Power Connector (ATXPWR1) This connector is for an ATX Micro-Fit power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
EMX-965GME 36 1.8.4 Serial Port 3 Connector (COM3) 1.8.5 Serial Port 4 Connector (COM4).
User’s Manual EMX-965GME 37 1.8.6 CPU Fan Connector (CPU_FAN1) z Do not forget to connect the f an cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components, and hardware monitoring errors can occur if you fail to plug this connector.
EMX-965GME 38 1.8.8 System Panel Connector (FPIO1) This connector supports several chassis-mounted functions. z System Power LED (2-pin PWRLED) This 2-pin connector is for the system power LED.
User’s Manual EMX-965GME 39 1.8.9 Primary IDE Connector (IDE1) z Orient the red markings (usually zigzag) on the IDE cable to Pin 1. z Please DO NOT use IDE1 and SATA2 at the same time.
EMX-965GME 40 1.8.11 LCD Inverter Connector (JBKL1) z Signal Description Signal Signal Description VR Bright adjust. Vadj=0.75V ~ 4.25V (Recommended: 4.
User’s Manual EMX-965GME 41 1.8.13 SPI Connector (JSPI1) 1.8.14 Digital Audio C onnector (SPDIF_OUT2) This connector is for an additional Sony/Philip s Digital Interface (S /P DIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis.
EMX-965GME 42 1.8.15 Serial SATA Connect or [B lack] (SATA1, SATA2, SATA3) SATA1 SATA2 SATA1 SATA3 SATA2 SATA3 z Install the Windows® 2000 Service Pack 4 or the Windows® XP Service Pack1 before using Serial ATA. z When using the connectors in Standard IDE mode, connect the primary (boot) hard disk drive to the SATA1 connector.
User’s Manual EMX-965GME 43 1.8.16 USB 2.0 Connector (USB3, USB4, USB5) These connectors are for USB 2.0 ports. Connec t the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
Een belangrijk punt na aankoop van elk apparaat Intel EMX-965GME (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Intel EMX-965GME heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Intel EMX-965GME vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Intel EMX-965GME leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Intel EMX-965GME krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Intel EMX-965GME bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Intel EMX-965GME kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Intel EMX-965GME . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
