Gebruiksaanwijzing /service van het product U1-BBFF-DFN van de fabrikant Interphase Tech
Ga naar pagina of 35
50-200 FISH FINDER Dual Frequency 50 & 200kHz Black Box Fish Finder CODE: B-300806 User Manual Copyright 2006 Interphase Technologies Inc. All rights reserved.
4 User Manual Contents Important Information ............................................................................... 6 WARRRANTY STATEMENT ............................................................................... 6 CAUTION ..............
5 User Manual 3.1.10.4 Fish Symbols ........................................................................ 21 3.1.10.5 Water Temperature ............................................................... 22 3.1.11 Transducer Setup .....................
6 User Manual Important Information WARRRANTY STATEMENT Interphase T echnologies, Inc. warrants this unit to be free from defects in material and workmanship. During the w arranty period, Interphase T echnologies, Inc. will repair or replace any component which fails in normal use without charges for parts or labour .
7 User Manual About this User Manual INTRODUCTION The chart plotter combined with the sonar performance of the Fish Finder is one of the most advanced marine navigation system available. Please read carefully this User Manual to learn the operating features for your unit.
8 User Manual HOW THIS USER MANUAL IS ORGANIZED ♦ CHAPTER 1: Overview Introduction to the basic information on the Fish Finder , its features and use. ♦ CHAPTER 2: Fish Finder Helps you understand how the chart plotter is connected to the Fish Finder and how to operate to impro ve your fishing.
9 User Manual 1 . Overview The Fish Finder consists of a high power transmitter , sensitive receiver and a transducer . The Fish Finder sends an electrical pulse to the transducer which contains an element that converts the pulse into acoustic (sound) wave which is sent through the water .
10 User Manual ♦ STC (allows reducing or eliminating the surface clutter) ♦ Interference Rejection (allows reducing interference from other boats/ Fish Finders) ♦ Noise Filter ♦ Fish Symbol feature (*) ♦ Automatic T ransducer Setup.
11 User Manual 2 . Fish Finder This chapter is intended to help you understand how the chart plotter with the Fish Finder connected operates to improve y our fishing. 2.1 UNDERSTANDING THE FISH FINDER PAGE The display on chart plotters shows a history of time of the echoes received by the transducer .
12 User Manual Digital Depth Readout of the current bottom depth. Water Temperature Readout of the current water temper ature returned by the TEMP 1 sensor included into specific transducers. Alarm Bar Bars showing the shallow water and deep water alarm v alues.
13 User Manual fish, causing a display pixel to be turned on. As the boat passes over the fish, the distance to the fish decreases turning each pixel on at a shallower depth on the display .
14 User Manual Fig. 2.2.1 - Page Selection menu The menu now shows four selections related to the Fish Finder , Full Display, 50/ 200kHz Full Display, Zoom Full Display and Chart/Fish display . Move the cursor to select the desired item and then press [ENTER] .
15 User Manual Fig. 2.2.2a - Sensitivity sub-menu Pressing [CLEAR] turns off the Sensitivity menu. The CLEAR key By pressing [CLEAR] the Variable Depth Mark er (VDM) is hidden.
16 User Manual Fig. 2.2.4 - Fish Finder Zoom Page The Depth Cursor is shown only on the unzoomed Fish Finder Display . The ZOOM IN and ZOOM OUT keys From this page pressing [ZOOM IN] changes to Z oom 4X, pressing [ZOOM OUT] changes to Z oom 2X.
17 User Manual Fig. 2.2.6 - Radar/FF page Otherwise to display the Radar and Fish Finder Combo pages, follow this procedure: [PAGE] + "Radar/FF/Chart/Nav Data" + [ENTER] Fig. 2.2.6a - Combo page When in Split/Combo pages, the active view is highlighted by a focus (Y ellow frame).
18 User Manual below the bottom of the screen, automatically moves up/down the current zoomed Fish Finder Display view and re-position the V ariable Depth Marker (VDM) at the center of the screen. NOTE Pressing [CLEAR] hides the Depth Cursor and if the Fish Finder is in Auto Range or Bottom Lock mode switches into Bottom Lock Zoom mode.
19 User Manual 3 . Setup your Fish Finder 3.1 FISH FINDER SETUP MENU The Fish Finder Setup menu provides access to additional functions, setup and layout/data field options. From the Fish Finder page, access this menu by pressing: [MENU] Fig. 3.1 - Fish Finder Setup menu 3.
20 User Manual Bottom Lock. [MENU] + "BOTTOM RANGE" + [ENTER] 3.1.5 Depth This option is available only when R ange Mode is Manual and it is disabled in Auto Range and Bottom Lock Mode. [MENU] + "DEPTH" + [ENTER] 3.1.6 Shift Shows the depth from which start the bottom scanning.
21 User Manual increases. This is for the purpose of filtering out surface clutter . 3.1.9.4 STC Length If STC is Custom, it is possible to change the Length of the Sensitivity Time Constant. 3.1.9.5 STC Strength If STC is Custom, it is possible to change the Strength of the Sensitivity Time Constant.
22 User Manual Icon : shows Fish icons Icon + Depth : shows Fish icons and their depth (accordingly to currently selected depth unit) The Fish icons displayed are among four different shapes depending on the size of the T arget (Small, Med, Big, Huge).
23 User Manual Fig. 3.1.12 - Fish Finder Alarms menu 3.1.12.1 Shallow Water T riggers an alarm when depth becomes shallower than the value set. 3.1.12.
24 User Manual.
25 User Manual 4 . 50-200 FISH FINDER This chapter provides instructions to assist in planning the installation of the 50-200 FISH FINDER. 4.1 TECHNICAL SPECIFICATIONS ♦ Display Colors : 1 6 colors .
26 User Manual When the package containing the 50-200 FISH FINDER is first opened, please check it for the following contents (if any parts are missing contact the dealer the 50-200 FISH FINDER was purchased from): ♦ 50-200 FISH FINDER (with P ower Serial and optional devices cables already connected) ♦ User Manual 4.
27 User Manual Fig. 4.3.1 - The 50-200 FISH FINDER Installation ♦ Fix the 50-200 FISH FINDER to the mounting location using the four screws (holes diameter 4 mm), see Fig. 4.3.2. ♦ Route the CHAR T PLOT TER cable to the chart plotter . ♦ Mount the transducer according to the instructions provided with it.
28 User Manual 4.5 EXTERNAL CONNECTIONS Fig. 4.5 - 50-200 FISH FINDER External Wiring 4.6 POWER SUPPLY WIRING DIAGRAM W e recommended the installation of a switch and a (5A) fuse in the positive DC supply to the 50-200 FISH FINDER.
29 User Manual In the example below you will notice the positive DC power connection is run through a switch and a fuse before connecting it to the 50-200 FISH FINDER and the chart plotter .
30 User Manual Fig.4.7a - Connection to the Fish Finder for chart plotter with 8 pin Power & I/O connector.
31 User Manual 5 . Transducers The transducer is a device that transmits and receives sound w aves into the water . The active component inside the transducer is commonly referred to as an element but actually is a piezoelectric ceramic material. Please refer to your dealer and/or installer to choose your transducer .
32 User Manual.
33 User Manual 6 . Frequently Asked Questions 6.1 How can I disconnect the cables from the 50-200 FISH FINDER in case I need to do so for the installation? ♦ Open the 50-200 FISH FINDER box unscrewing the four screws (see the following figure). Fig.
34 User Manual Fig. 6.1b - The 50-200 FISH FINDER (III) 6.2 How can I set optimal operating parameters. Optimal operating par ameters can be set accordingly with the intended use of the Fish Finder , .
35 User Manual 6.7 What should I do if the auto modes fail? F ailure of auto modes can happen for various reasons. Hereafter you can find a range of possibilities. 6.8 Auto-range fails in very shallow waters displaying a digital depth readout deeper than the actual value.
36 User Manual 6.12 Why do I never see fish in the range between 0 to 0.7 meters? The minimum range of the fish finder is 0.7 meters. In this interv al the Fish Finder can detect neither the bottom nor any target. 6.13 How can I reduce the surface clutter? Y ou can act by: properly setting the STC as described at 6.
37 User Manual Index 50-200 FISH FINDER ................................. 26 50/200kHz Full Display .............................. 14 A A-Scope ............................................... 9, 12 Alarm ..................................... 10, 12, 22, 23 Alarm Bar .
Een belangrijk punt na aankoop van elk apparaat Interphase Tech U1-BBFF-DFN (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Interphase Tech U1-BBFF-DFN heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Interphase Tech U1-BBFF-DFN vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Interphase Tech U1-BBFF-DFN leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Interphase Tech U1-BBFF-DFN krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Interphase Tech U1-BBFF-DFN bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Interphase Tech U1-BBFF-DFN kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Interphase Tech U1-BBFF-DFN . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
