Gebruiksaanwijzing /service van het product xtraCoN series van de fabrikant Intronics
Ga naar pagina of 49
.
xtraCoN Series: Video+Audio+USB Extender Over LAN (or USB) Model Number Resolution Max. Platform LAN Output Connector Audio Connector MACNM-H90 1920 x 1080 MACNM-H92 1920 x 1200 2048 x 1152 Windows/ M.
Related Products xtr aViU Series: Video+Audio Extend er Over LAN (or USB) Model Number Resolution Max. Platform LAN Output Connector Audio Connector VCNM-H90 1920 x 1080 VCNM-H92 1920 x 1200 2048 x 11.
Related Products xtr aViU Series: USB-to-Video Extender Model Number Input Output VCUA-20/ 60/ 90/ 92 USB VGA VCUD-20/ 60/ 90/ 92 USB DVI-D VCUB-20/ 60/ 90/ 92 USB DVI-D + VGA * UP T O FOUR xtraCoN series through the USB 2.
T able of Content Introduction .............................................................................................. 5 Features ................................................................................................... 6 Packing Checklist .
------------------------ Introduction xtraCoN ser ies , Video+ Audio+ USB Extender over LAN : MCNM/ MACND/ MACNA series --- provides LAN connect ivity via CAT5 cable (or USB cable connection) for HDMI.
----------------------- - F eatures Easily add the extra console (s) via the USB o r the exitin g LAN system without additional wiring . Add up to 4 ex t ra c o ns o l es allowing 4 + 1 users to share one computer at a time; the control power is on first-come, first-serve basis.
★ System Requirements Network: Supports 100/1000 Mbps of bandwidth. Display: Monitor(s) or P rojector(s) Computer (Windows Vista): 1. WEI (Windows Experience Inde x) score of at least 3.0 overall. The recommended hardware depend s on the display resolution: 1366x768: overall WEI score of at least 3.
★ Additional Requirements The Unit software can be installed on any deskt op or laptop system running Windows 2000 SP4, Windows XP SP2 or SP3, Windows Vista SP1/SP2 32-bit and 64-bit editions, Windows 7 and Intel-based Mac OS 10.
------------------- Product Description 1 2 USB Connector Connect to USB (1.0/ 2 .0) Peripherals (USB connector do es not support USB hub) 3 Video Connector Connect to VGA / DVI / HDMI Di splay Device.
10 Figures listed below illustrate typical applications of xtraCoN series. The model you have purchased may b e slig htly different from those de scribed in the figures.
------------------------Connection Before the Connection 1. Install the software to the computer first BEFORE the physical installation 2. P rior to the installation, ensure to power off all devices that will be connected to this system. 3. Ensure that all devices you will connect are prop erly grounded.
-------------- W indows 2000/XP/Vista/7 Driver Installation The source computer r unning Wi ndows 2000/XP/V ista/7 is required to install the appropriate Unit software accordin g to the intercon nection deployment method that could be Extending the video via the Local Area Network system or Extending the video via USB .
Windows z Install the XtraV iU_NET driver (W indows 2000/XP/V ista/7) 1. Insert the CD into the CD/DVD-ROM drive, and then browse: X: Windows XtraViU_NET USBServer_XtraViU_NET_xx Double-click the file.
Windows 3-3) Confirm that your network is operating normally and keep your computer online 3-4) Connect the xtraCoN Unit RJ-45 Connector to the network by using an Ethernet CA T5 cable 3-5) Connect the xtraCoN Unit to the monitor and switch on each connected monitor 3-6) P ower ON the the xtraCoN Unit 4.
Windows Oper ation Extend the v ideo v ia US B z Using Menu Bar Control (Windows 2000/XP/V ista/7) Once the softwa re and hardware of th e xtraCoN Unit are pro perly installed and co nnected, th e use.
Windows 2. Screen Rotation The user may rotate the extra screen to the desired angle fo r certain applications. Normal: keeps the extra screen with the same angle as the primary screen. R otated Left: rotates the extra screen 90 degree clockwise. R otated Right: rotates the extra screen 90 degree counterclockwise.
Windows R o t a t e d R i g h t U p s i d e - D o w n 3. Extend T o Allows the user to set the extra screen ext end to the above, below , left, and right of the primary screen.
Windows In Extend Mode, the monitor attached to the xtraCoN Unit forms part of the extended windows desktop. The extra desktop area is a great productivity aid, allowing more applications or documents to be visible at a time.
Windows 6. Mirror Allow users to set the extra scr een as a clone of the primary screen. P r i m a r y s c r e e n E x t r a s c r e e n 7. Off Allow users to turn off the extra screen. 8. Optimize for Video (Vista and Windows 7 Only) Configure the secondary display for optimum full screen video performance out put.
Windows 9. Fit to TV If the Windows desktop does not completely appear on TV , this option can be used to adjust th e size of the Windows desktop. However , only on TV screen, users ca n adjust the size to full screen while this function may not be a pplicable to s ome PC monitors.
Windows Y ou will also see a red border on the extend screen The red border shows the size of the new Windows desktop (Extend). Use the “+” and “-” controls on the Fit to TV Screen to change the size of the red border until it fits on the TV screen.
Windows 10. Advanced P rovide more options for settings as following shown. Display selection Resolution and Color Quality Settings 22.
Windows Refresh Rate : Click “Ad vance” Æ ”Adapter” Æ ”List all mode…”, all valid combinations of resolutio n, color quality and refresh rate are fully listed here. Flat panel monitors do n ot flicker and require a low refresh rate.
Windows P o r t r a i t P o r t r a i t ( f l i p p e d ) L a n d s c a p e L a n d s c a p e ( f l i p p e d ) Duplicates these displays: R e produces the main display on the second display . Extend these displays: Extends the main display onto the secondary display .
Windows T o control the behavior of an attached xtraCoN display , it is als o possible to use Windows K ey+P to display a menu (and cycle through it) to switch mode. Select the Windows K ey+P . The following menu appears. Click on one of the options. The display updates to reflect your choice.
Windows Oper ation Extend the Video+Audio v ia the Local Area Network system z Using USB Server (Windows 2000/XP/V ista/7) The USB Serv er , a Graphical U ser Interfac e (GUI), is a useful tool to s et up multi- xtraCoN Units for your computer video output display .
Windows The “Video Device” is now locally us ed Device Disconnection When finishing the Audio/Video tran smission, user may disconnect the device(s) and left the controlling a ccess for the next user .
Windows Audio Configur ation (Speakers) After the “Media Device” is locally connect ed, users can find the V olume control options on the taskbar . Open V olume control options window and check Speakers (USB PnP Sound Device) Audio Configur ation (Microphone) Attach the microphone to the xtr aCoN Unit .
Windows By default, the xtraCoN Unit gets the IP Address from DHCP server automatically . The PC’ s IP Address mu st be in the same subnet as the xtraCoN Unit’ s IP Address for the two devices to communicate. (For example, if xtraCoN Unit’ s IP Address is 192.
Windows z Network Configuration If your network doesn’t have or support DHCP Server , please assign a unique IP for each connected xtraCoN Unit . Step 1. Right click the device on the list and select “Server Configurations” NOTE : The device status should be on “ Free” status Step 2.
Windows NOTE : The PC’ s IP Address must be in the same subnet as the xtraCoN Unit’ s IP Address for the devices to communicate. NOTE: No password is set by factory defaults.
Windows z Network Configuration Multi-users xtraCoN operation is on first-come first-serve basis. Different users cannot access the same xtraCoN unit simultaneously . Th ree s t at u s es c an be found on the USB Server sc reen as the following figu re shown.
Windows Request Disconnect Dev ic e Under multi-users situation you may send “R equest Disconnect Device” message to the current user and ask for accession to the xtraCoN device. Right click on the device yo u want to access and then select “R equest Disconnect Device” As figure shown above.
Windows The current user will receive a message indicating the disconnection request, and he/ she can decide whether to yield the controlli ng access or not. As the figure shown below If the current user is still working on the device operation then your monitor will P op-Up screen as below .
Windows Setup Button: R estore Factory Defaults Users can reset the xtraCoN Un i t back to its original state (Factory Default Settings) through a pinhole Setup Button (as the figure shown below). This feature is helpful for some circumstances, such as IP or password lost or forgotten, etc.
Windows Standby and Hibernate, Shut down and Restart If a computer/lapto p connecting to an xtraCoN Unit is placed into standby or hibernate mode, the display goes blank. When the computer/laptop is again powered up (and unlocked if necessary) the connected monitor returns to the same mode as it was before stand by or hibernate.
------ Intel-based Mac OS 10.4/10.5/10.6 In addition to being compatibl e with Windows 2000/XP/Vista/7, xtraCoN se r ie s provide a better platform flex ibility in supporting Intel-based Mac OS 10.4/10.5/ 10.6 for extending video via USB. P l ea s e f ol l o w t h e instructions belo w listed step by step fo r the driver ins tallation.
Ma c 2. Double-click the “Software Inst aller” to install the software 3. Once the installation is complete, click the “R estart” button. The computer will reboot automatica lly 4. After the co mputer has be en restart ed, plug in the xtraCoN Unit to an available USB 2.
Ma c Oper ation Using Menu Bar Control Once software ha s been installed to the Mac, simpl y plug each xtraCoN Unit connected wit h display into the M ac. Y ou can now us e up to 4 additio nal monitors. When a ttaching a moni tor to your Mac , by default, the monitor will be extended to th e right of the mai n display .
Ma c 1. Screen Resolution T o change the resolution for the display preference, select an available resolution by accessing to the path: Menu bar → Display P reference → Gather Windows The resolution availability depends on both the xtraCoN Unit and the capabilities of the connected display .
Ma c 3. Display P ositions If your computer is connected to more than two displays, you can specify that some are mirrored displays and others show the extended desktop. A mirrored display shows the same content as the main display whereas an extended display will be an extension to your existing desktop.
Ma c 4. Mirror When in Mirror mode, additional displays will di splay what is being shown on the primary display . Checking the “Mirror Display” on the ‘Arrangement’ pane enables this feature. 5. Set as Main Monitor Y ou can change the main display by moving th e Menu Bar among displa ys.
Ma c 6. Use both extended and mirrored displa ys T o work with both extended and mirrored displa ys, uncheck the box of mirror displays as the circle mark below , then in the Arrangement pane hold down both keys cmd and alt and drag the display you wish to overlay the primary displa y .
Ma c Audio Configur ation (Speakers) Open the “Sound” control option in System P reference. Select “Output” page and then choose “USB PnP Sound D evice.” Audio Configur ation (Microphone) Open the “Sound” control option in Syst em P reference.
----------------------- -Specifica tions MACNA-H20 MACNA-H60 MACNA-H90 M ACNA-H92 MACND-H20 MACND-H60 MACND-H90 M ACND-H92 Signal Input Ethernet + USB Signal Output HDB15 (MACNA) / DVI-D (MACND) Resolution (Max.
MACNM-H90 MACNM-H92 MACNM-G90 MACNM-G92 Signal Input Ethernet + USB Signal Output HDMI Resolution (Max.) 1920 x 1080 1600 x 1200 1920 x 1200 2048 x 1 152 LEDs Dual Color x 1 + Blue x 1 RJ-45 Y e s Connector (In) USB Y es, USB 2.0 Connector (Out) HDMI (Female), USB-A (2.
T roubleshooting Symptom P ossible Cause Solution USB connection might be a issue Make USB A-B cable length not exceed 5 meters. No video on screen(s) or screen(s) flicker CA T5 connection might be a .
Limited Warr anty IN NO EVENT SHALL THE DIRECT VENDOR'S LI ABILITY FOR DIRECT OR INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, LOSS OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED BY THE USE OF THE PRODUCT EXCEEDS THE PRICE PAID FOR THE PRODUCT.
Een belangrijk punt na aankoop van elk apparaat Intronics xtraCoN series (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Intronics xtraCoN series heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Intronics xtraCoN series vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Intronics xtraCoN series leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Intronics xtraCoN series krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Intronics xtraCoN series bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Intronics xtraCoN series kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Intronics xtraCoN series . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
