Gebruiksaanwijzing /service van het product GHPB01 van de fabrikant IOGear
Ga naar pagina of 74
HomePlug to Ethernet Bridge User Manual (GHPB01).
.
Thank you for purchasing one of the most user-friendly networking devices on the market. IOGEAR’s HomePlug to Ethernet Bridges are first-class networking devices designed to network your computers at home (or in your small office).
Table of Contents Overview Features Requirements Introduction Installation Network Configuration Networking Basics - Network Setup Wizard - Checking IP Address - Assign a Static IP address - Sharing D.
Overview IOGEAR's HomePlug Powerline Network Ethernet Bridge allows you to network your home comput- ers through the electric power lines in the house.
Features • No extra wires, using the most pervasive medium in your home - power lines • Allows multiple computers to share Internet access, printers, and other resources through the power lines • Very easy and intuitive to set up and install • HomePlug Powerline Specification 1.
• Available AC power outlets in the room. • Standard home power line wiring. • Computers with 10/100Base-T adapters, or 10/100Base-T switch/hub. • When used as a node: Windows 98SE, ME, 2000, XP. • When used as a bridge: any operating system (OS transparent).
IOGEAR's HomePlug to Ethernet Bridge allows you to network your computers via your existing home power lines. It offers a data transmission speed of up to 14 Mbps, and reaches up to 990 feet through standard power lines. Package contents: 1. HomePlug to Ethernet Bridge 2.
Introduction 6 Front View: (Drawing) 1. Power LED - lights up in green when plugged into a power outlet 2. Collision LED - lights up in green whenever there is collision 3. Link LED - lights up in green after plugged into a power outlet 4. ACT LED - blinks in green when there is network activity 5.
Installation There are several ways to network your computers using the HomePlug Bridge. Before we get started, please NOTE: Do not place HomePlug devices under direct sunlight or near high heat emitt.
If you plan to use this unit as a NODE, not as a BRIDGE (refer to the Network Terms for details): 1. Remove the HomePlug Bridge, the power cord, the CAT5 cable and the installation CD from the package. 2. Allocate a space for the adapter's placement.
Installation 6. Read, understand and accept the License Agreement and Con- tinue by clicking Next. 9.
Installation 7. Enter a username and organiza- tion name, and continue installa- tion. (Username and Organiza- tion have no importance in device operation.
8. Click Install to start the Installa- tion Wizard: 11 Installation.
9. After installation is successful, a win- dow will pop up prompting for the in- stallation of the HomePlug Bridge. Plug in the CAT5 cable, one end into the Ethernet port on the HomePlug Bridge, the other end into an available network port on your computer.
13 Installation 10. You have reached the end of your installation. Please restart your computer for changes to go into effect..
HomePlug Node Configuration Steps: 1. After restarting your computer, you should see this icon on your desktop. Click on it to begin configuring your HomePlug device.
2. Click Next to begin the configuration. 15 Network Configuration.
3. Click Next to continue. 16 Network Configuration.
4. Type in a network password between 4 and 24 characters long and click Next. The password can consist of numbers and/or letters. 17 Network Configuration.
5. Click Next. 18 Network Configuration.
6. Once your HomePlug Network has been configured, click Next. If other de- vices are present on the HomePlug net- work, their MAC addresses will be shown in "HomePlug Network De- vices".
7. After the configuration is complete, click Finish. Network Configuration 20.
Network Terms What is a node? A node is any given device that resides or is connected onto an existing network. A computer with a network card connected to a switch is a node. The same thing applies to a Mac connected to a hub. What is a bridge? A bridge is used when connecting one side of the network with another network.
22 Network Configuration You will have to use bridges to connect two Macintoshes, because the utility software is only compatible with Windows-based computers. Can I use both in the same network? Yes. It is possible to have both nodes and bridges on a network as long as there is only a maximum of 2 bridges.
a. Using the HomePlug to USB Adapter ONLY 23 Network Configuration.
24 Network Configuration b. Using the HomePlug Ethernet Bridge (Node Mode) (Several HomePlug Bridges can be used).
25 Network Configuration c. Using the HomePlug USB Adapter AND Ethernet Bridge (Node Mode).
d. Using the HomePlug Ethernet bridge to make a sub network HomePlug ready to communicate with the other HomePlug nodes. (Only 2 Homeplug Bridges can be used.
Prior to installing HomePlug, you may have had some ideas about using your new network. This section will help you get started on those ideas or even give you some new ones. It will go through the process of sharing files, printing from any computer on the network, or accessing the Internet on multiple computers with one connection.
Click "Next" in the window(right) for the Network Setup Wizard. 28 Networking Basics.
Read and follow the instructions in the following window and then click "Next". 29 Networking Basics.
In the following window, select among the 3 options which best describe this computer and then click "Next". If your computer connects to a broadband router/ gateway, select the second option.
Fill in the information in the following window as you desire and then click "Next”. 31 Networking Basics.
Enter the Workgroup name as you wish and then click "Next". (Very important: All computers on your net- work should have the same Workgroup. Networking Basics 32.
Review the setting in the following screen, and click "Next" to continue. If you want to change any settings, you need to click "Back" and start over again.
Please wait while the Network Setup Wiz- ard applies the changes and configures the computer. 34 Networking Basics.
When the configuration is done, the follow- ing screen will come up. Select one of the 4 options according to your needs. (In this example, the last choice was selected.
Networking Basics 36 Then click "Finish" on this next window..
The new setting will take effect after you restart the computer. Click "Yes" to restart the computer. Congratulations, you have completed configuring this computer! After setting up networks on all your computers on the network, you will be able to use your HomePlug network to share files, printers, and Internet connections.
Topic 2: Checking IP ad- dresses in Windows XP/ 2000 Go to Start>Programs>Accessories> Command Prompt. Networking Basics 38.
Type "ipconfig" at the prompt, then press Enter. You will see the IP address of this computer. Networking Basics 39.
Topic 3: Assigning a Static IP Address (Note: If you use DHCP-capable gateway/router, you don't need to assign any static IP addresses because the gateway/router will automatically as- sign IP addresses to the computers on the net- work.
At the following window, select "Use the following IP address:", and fill in the desired IP address and subnet mask (it is recommended to use the default subnet mask as shown in the following window. Subnet mask must be the same for all the computers on the network.
Click "Close" on the Local Area Connection Properties window. You have completed static IP address assignment. Networking Basics 42.
Topic 4. Sharing Disks/Folders Once the network has been checked / configured, you can access other systems via "My Network Places". To allow other systems to access data on your disks / in your folders, you have to give permission to share your disks and/or folders.
Networking Basics 44 Once you have selected the folder to be shared, right-click to select “sharing and secu- rity.”.
Networking Basics 45 2. In the following window, click to select "Share this folder". Then click on "Permission"..
Networking Basics 3. Please note that by default, all users defined on your XP Professional system will have full permissions. You can reduce the permissions (for example to allow only Read-access) and/or you could add a different group of users to have access permission (but then you should delete the group "Everyone" from this list).
Networking Basics 4. Click OK on the original Sharing and Security window to conclude the process. 5. Once a disk or folder is shared, the icon will show it via the "holding hand.
Networking Basics 48 Topic 5. Share Printers You may now share any installed printers connected to this computer with other computers on your net- work. 1. Using the computer that has the printer already connected to it, go to: Start > Control Panel > Print- ers and Faxes.
2. In the following window, click on "Share this Printer" and type in the share name you would like. After this is done, click on "Ap- ply" and then "OK".
Networking Basics 50 Now when you go to "Print- ers and Faxes" in the Control Panel, you will see the supporting hand under- neath the printer, which means that the printer is being shared in the net- work.
Networking Basics For a computer to access a Network Printer, the device driver or software for that printer must be installed and pointed to the proper location of the printer. This is done similarly to the way you installed the printer on the computer it is connected to.
2. Click on "Add a printer". Networking Basics 54.
Networking Basics 3. Select the network printer option and click Next. 55.
4. Find the printer you would like to share and click Next. Networking Basics 56.
Networking Basics Decide if you would like to choose this printer as a default printer and click Next. 57.
You have now added the printer to your computer, click Finish. Now you may use the Network Printer as if it were directly connected to the computer. Make sure that the computer which is directly connected to the printer is on.
Sharing Internet Access Topic 6. Sharing Internet Access So how can the Internet connection be shared among other computers on the HomePlug network? Since neither the HomePlug Bridge nor USB Adapter are capable of routing at this time, a router is necessary in order to share an Internet connection.
HomePlug to USB Adapter or a HomePlug Bridge. Please note that only two (2) HomePlug Bridges are allowed on one network if used as bridges (without installation of the software).
Sharing Internet Access a. Make sure that the DSL/Cable modem is connected to the Router (using the WAN port on the router.) b. Connect the HomePlug Bridge to the Router (using the Uplink port on the router.) c. Check the link light on the HomePlug Bridge.
Checking Router Settings: Please make sure that the following settings on your router are set: (The setup windows will depend on the router manufacturer's software.) A) The IP should be obtained automatically; B) DHCP must be enabled; C) Release DHCP and then Renew DHCP to reset the IP Addresses.
Troubleshooting Frequently Asked Questions/Troubleshooting 1. Will HomePlug work in my house or apartment? If the house or apartment was built under U.
Troubleshooting 64 4. What is the difference between bridge mode and node mode in the HomePlug Ethernet Bridge (GHPB01)? Bridge mode operates without software installation and can work with any 10/100Base-T or 10Base-T Ethernet connections.
conflicts with the operation of a Bridgedecor.exe file, executed on boot. To repair this problem, go into Windows Safe Mode and disable the Virtual Private Networking Adapter. You can disable the Adapter by right clicking on your Network Neighborhood Icon and click- ing on properties.
be on one network. If devices do not have the same encryption password, they will not be able to communicate with each other. 8. What OS does the HomePlug utility software fully support? Windows 98SE, ME, XP, and 2000.
To help IOGEAR® customers obtain the highest level of performance from their HomePlug devices, the IOGEAR® Service Support team is available to answer your technical ques- tions. Do not hesitate to call if you are having trouble getting your device to work correctly.
Getting Technical Support 68 1) What is the purchase date and serial number of the product? 2) Were any messages displayed on the screen when the error occurred? If so, what was the exact wording of t.
Product Specifications 69.
Limited Warranty 70 Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.
© 2002 IOGEAR® All Rights Reserved. PKG-M0024 IOGEAR and the IOGEAR logo are trademarks or registered trademarks of IOGEAR Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc.
.
23 Hubble • Irvine, CA 92618 • (P) 949.453.8782 • (F) 949.453.8785 • www.iogear.com Contact info..
Een belangrijk punt na aankoop van elk apparaat IOGear GHPB01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen IOGear GHPB01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens IOGear GHPB01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding IOGear GHPB01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over IOGear GHPB01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van IOGear GHPB01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de IOGear GHPB01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met IOGear GHPB01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.