Gebruiksaanwijzing /service van het product JLWM 1404 van de fabrikant John Lewis
Ga naar pagina of 40
JLWM 1404 1400 spin washing machine Instruction manual.
Safety information It is most importa nt that this inst ruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should.
• Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub a nd the inner drum. • Do not use your washing machine to wash articles with whalebones, material without hems or torn material.
• The users should always check that they have not left their gas lighters (disposable or otherwise) in their clothing. • Never tumble dry items that have had contact with chemicals such as dry cleaning fluid. These are of a volatile nature and could cause an explosion.
Contents Operating instructions Safety information 2 General safety 2 Installation 3 Use 3 Child safety 4 Product description 7 Detergent dispenser drawer 8 Control panel 8 Programme Dial (2) 9 Spin (.
End of programme 15 Helpful hints and tips 16 Washing programmes 18 Technical data 21 Consumptio n values 22 Care and cleaning 22 Descaling 22 External cleaning 23 Washing drum 23 Door seal 24 Cleanin.
Product description 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 1 2 3 5 4 6 7.
Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain re mover used during the stain action phase (if available). The prewash and soa k detergent is added at the beginning of the wash programme. The stain remover is added during the stain action pha se.
12 3 4 5 6 7 8 9 10 11 1 Detergent dispe nser drawer 2 Programme selector dial 3 Spin button 4 Prewash button 5 Intensive button 6 Extra rinse button 7 Quick button 8 Start/Pa use button 9 Door lock light 10 Delay start button 11 Display - Wash time Programme Dial (2) It allows you to switch the appliance on/off and/or to select a programme.
Intensive (5) By selecting this function the washing intensity will be increased and the washing time will be prolonged by a few minutes depending on the selected temperature. This option can be selected for heavily soiled cottons. Extra Rinse (6) This appliance i s designed to save energ y.
The washing machine has stopped with water in the tub , at the end of the «Soak» programme or if the «Rinse hold» option has been set: this is indica ted by a flashing zero. T he «Door lock» pilot light is still on. The door cannot be opened. The washing machine has completed the programme : th is is indicated by a flashing zero.
Personalisation Acoustic signals The machine is provided with an acoustic device, which sounds in the following cases: • at the end of a washing cycle • if there is a fault You can deactivate the acoustic signal (except if there is a fault) by pressing the buttons 5 and the 6 simultaneou sly for about 5 seconds.
If required, pour fabric softener into the compartment marked (the amo unt used must not exceed the «MAX» mark in the drawer). Close the drawer gently.
If an option which is not compatible with the set wash programme is selected, the red button 8 light flashes 3 times and the message Err is displayed for a few seconds. When the option is set, the relevant light is on. Select the delay start Before you start the pro gramme, press this button repeatedly to select the desired delay.
How to interrupt a programme Press the button 8 to interrupt a programme which is running, the corresponding green pilot light starts blinking. Press the sa me button again to restart the programme.
Stand by : once the prog ramme has finished after a few minutes the energy saving system is enabled with the pilot lights switched on. By pressing any button the appliance will come out of the energy saving status.
Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Treat any residual marks with bleach. Red wine: soak in water an d detergent, rinse and treat with acetic or citric acid, then rinse. Treat a ny residual marks with bleach.
Washing programmes Programme - Maximum and Minimum Temperature - Cycle Description - Maxi mum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Compar tment Cottons 90° - 60° Main wash - Rinses Maximum spin speed at 1200 rpm Max.
Programme - Maximum and Minim um Temperature - Cycle Description - Maximum Spin Speed - Maxi mum Fabrics Load - Ty pe of Laundry Options Detergent Compartment Cottons 40° - 30° Main wash - R inses Maximum spin speed at 1200 rpm Max. load 6 kg - Reduced load 3 kg Colour cotton (normally or slightly soiled items).
Programme - Maximum and Minimum Temperature - Cycle Description - Maxi mum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent Compar tment Soak 30° Prewash - Soak for about 40 min utes - Stop with water in the tub Max. load 6 kg Special programme for h eavily soiled laundry.
Programme - Maximum and Minim um Temperature - Cycle Description - Maximum Spin Speed - Maxi mum Fabrics Load - Ty pe of Laundry Options Detergent Compartment Spin Drain and long spin Maximum spin speed at 1200 rpm Max. load 6 kg Separate spin for hand washed cotton garments and after programmes with option Rinse ho ld.
Consumption values Programme 1) Energy consumption (KWh) 2) Water consumption (litre) 2) White Cottons 95 °C 2.1 62 Cottons 60 °C 1.35 59 Cottons 40 °C 0.75 59 Synthetics 40 °C 0.5 44 Delicates 40 °C 0.55 57 Wool/ Handwash 30 °C 0.3 57 1) Refer to the display for th e programme time.
We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash : • The drum should be empty of laundry. • Select the hottest cotton wash programme. • Use a normal measure of deterge nt, must be a powder with biological properties.
Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool. 1. Remove any rust deposits on th e drum with a cleaning agent for stainless steel. 2. Run a washing cycle without any washing to clean off any cleanin g agent residues.
7. When no more water comes out, unscrew the pump cover by turning it anti-clockwise, using pliers, and remove the filter. Always keep a towel nearby to dry up any water spillage whe n removing the cover. Clean the filter unde r a tap, to remove any traces of fluff.
Cleaning the water inlet filters Warning! If the appliance doesn't fill or it is taking longer to f ill with wate r, check if the water inlet filters are blocked. 1. Turn off the water tap. 2. Unscrew the water inlet hose. 3. Clean the filter using a hard bristle brush.
Important! Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will avoid wasting detergent on the next wa sh programme.
Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. After removing all the pa ckaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom.
5. Open t he porthole and rem ove the polystyrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supp lied in the bag containing the instructio n booklet. Positioning and levelling Install the machine on a f lat hard floor.
of connectors are ava ilable from good hardware stor es and plumbers me rchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent pe rson, or qualified plumber. Water inlet Warning! This appliance must be connected to a cold water supply.
1. Into a drainage standpi pe Firstly form a hook i n the end of the dra in hose using the “U” piece” supplied. 1 Place the drain hose into your standpipe, which should have an internal diameter of approximately 38 mm thus ensuring there is an air break betw een the drain hos e and standpipe.
Important! Before connecting up the machine to new p ipework or to pip ework that has not bee n used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.
SHOWER BA TH BIDET WASHING MACHINE DISHWASHER RAINWA TER ‘RUN-OFF’ SURF ACE WA TER DRAINS & SEWERS UNTREA TED DISCHARGE RIVER RIVER FOUL DRAIN FOUL SEWERS SEWAGE TREA TMENT WORKS TREA TED DISC.
Important! Information on the electrical c onnection is given on th e rating plate on the inner edge of the appliance door. The appliance is supplied with a 13 amp plu g fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS1363/A) fuse must be use d.
What to do if… Certain problems are due to lack of simple maintenance or oversights, which can be solved easily witho ut calling out an en gineer. Before contacting you r local Service Centre, please carry ou t the checks listed below.
Proble m Possible cause/Solu tion The machine does not fill: The water tap is closed ( E10 ). • Open the water tap. The inlet hose is squashed or kinked ( E10 ). • Check the inlet hose connection. The filter in the inlet hose or the inlet valve filter is blocked ( E10 ).
Problem Possible cause/Solution Unsatisfactory washing results: Too little detergent or unsuitable detergent has been used. • Increase the detergent quantity or use another one . Stubborn stains have not been treated prior to washing. • Use commercial products to treat the st ubborn stains.
Repairs - After Sales Service Repairs - After Sales Service Your appliance comes with a three year warranty. If it is no t working correctly; consult the fault finding guide s within this instruction book ("What to do if .
Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be take n to the appropriate collection point for the re cycling of electrical and electronic equipment.
John Lewis Partners hip 171 Victoria Street London SW1E 5NN www.johnlewis.com 132944211-A-092011.
Een belangrijk punt na aankoop van elk apparaat John Lewis JLWM 1404 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen John Lewis JLWM 1404 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens John Lewis JLWM 1404 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding John Lewis JLWM 1404 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over John Lewis JLWM 1404 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van John Lewis JLWM 1404 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de John Lewis JLWM 1404 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met John Lewis JLWM 1404 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
