Gebruiksaanwijzing /service van het product 13709 van de fabrikant Jura Capresso
Ga naar pagina of 27
IMPRESSA F70/F7/F707 Instructions for use 4/05 Art. Nr. 65391.
JURA IMPRESSA JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.jura.com Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 6 Fig. 7 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 16 1 2 3 Fig. 5 B A Fig. 8 B Fig. 15 Fig. 17.
Control elements 1. Rotary Switch 2. Illuminated ring 3. ON / OFF symbol 4. 1 LARGE CUP symbol 5. 1 COFFEE symbol 6. 1 ESPRESSO symbol 7. MAINTENANCE symbol 8. START symbol 9. Display dialog system 10. Water tank with handle 11. Filler funnel for pre-ground coffee 12.
5 Contents 1. Safety information .......................................... page 6 1.1 Warning .............................................. page 6 1.2 Precautions .......................................... page 6 2. Preparing the IMPRESSA ..........
6 Introduction Thank you for purchasing the IMPRESSA. To ensure perfect func- tioning of your IMPRESSA, carefully read this operating manual and keep it for future reference.
7 Then fill the water tank and reinstall it. Make sure to install the tank properly, it must engage audibly. 2.4 Fill coffee beans To ensure that your machine will work perfectly for a long time a.
8 Close the steam / hot water draw-off tap (14). FILLING SYSTEM HEATING PRESS MAINT. Touch the symbol (7). Machine carries out a rinsing operation. RINSING READY If BEANS FILL is displayed, press the coffee draw-off key again.
9 5. Installation of Claris plus filter cartridges If the Claris plus filter cartridge is installed properly, de- scaling of the coffee machine is no longer required. For more information on the Claris plus filter cartridge refer to brochure «Claris plus.
10 Place a sufficiently large jug (approx 1 litre) under the replace- able hot water nozzle (16) and open the steam/hot water tap (14) (Fig. 12). RINSING FILTER CLOSE TAP Open the steam / hot water draw-off tap (14) (Fig. 12). HEATING UP READY 5.
11 9. Making 2 cups of coffee You cannot choose the strength of the coffee when making 2 cups. The machine automatically makes 2 mild cups of coffee. You can set the amount of water you want with the Rotary Switch (1) prior to drawing off coffee Touch the (8) symbol to stop drawing off coffee pre- maturely.
12 10. Drawing off pre-ground coffee Never use instant coffee or quick-coffee. We recommend that you always use powder from fresh coffee beans or, pre- ground, vacuum-packed coffee. Never fill in more than 2 portions of powder. The pre-ground coffee tank is no storage tank.
13 CLOSE TAP Close the steam / hot water draw-off tap (14). READY Before CLOSE TAP water may still escape the system. 12. Drawing off steam To ensure perfect operation, clean the 2-stage frothing jet (15) regularly. Screw the nozzle off as described in.
14 13.1 Attaching the Professional-Cappuccino Frother or the Easy-Cappuccino Frother to the IMPRESSA Remove either the hot water nozzle (Fig.5) or the 2-stage froth- ing jet (Fig. 6). Now attach the Professional-Cappuccino Frother or the Easy- Cappuccino Frother (Fig.
15 Fill water into a container (approx. 1/2 litre) and immerse the milk tube in it. Place a sufficiently large vessel under the Professional-Cappuc- cino Frother or the Easy-Cappuccino Frother. Draw steam until the water from the Professional-Cappuccino Frother or the Easy-Cappuccino Frother runs clean.
16 Press the Rotary Switch (1) RINSE Turn the Rotary Switch (1) until the required program item ap- pears on the display (9). e.g. RINSE, CLEAN, FILTER, DE-SCALE or EXIT e.g. CLEAN Press the Rotary Switch (1) The cleaning program starts.
17 The illuminated ring (2) is active. Turn the Rotary Switch (1) until TIME is displayed. TIME Now press the Rotary Switch (1) to start programming the time. --:-- Turn the rotary Switch (1) to adjust the hours.. 12:-- Press the Rotary Switch (1) to confirm the hour settings and to activate the minutes.
18 OFF AFT. HR Now press the Rotary Switch (1) to start programming the switch-off time. Switch-off time OFF AFT. HR 5.0 HR Turn the Rotary Switch (1) to adjust the hours. 1.0 HR Press the Rotary Switch (1) to save the setting.
19 LANGUAGE Turn the Rotary Switch (1) until EXIT appears Press the Rotary Switch (1) to leave the programming mode. READY 15.11 Programming Display 24H/AM/PM READY Press the Rotary Switch (1) until FILTER – / appears The illuminated ring (2) is active.
20 16. Maintenance 16.1 Filling in water FILL WATER If this information is displayed, drawing off products is no longer possible. Refill water as described in Chapter 2.3. READY The water tank should be rinsed daily and refilled with fresh water.
21 16.6 Cleaning the IMPRESSA After 200 draw-off operations or after 80 rinsing operations, the IMPRESSA must be cleaned. A message appears on the display, telling you to start the cleaning programme. You can still draw off coffee or hot water/steam. However, we recommend that you should clean the machine (Chapter 17) within the next few days.
22 READY CLEAN Touch the symbol (7). EMPTY TRAY Empty the tray (20). NO TRAY Insert the tray (20) again. Remove the drip grate (19). Put a container (1 l, Fig. 11) under the adjustable coffee spout (17). PRESS MAINT.
23 When using the de-scaling agent, immediately remove any splashes or drips from sensitive surfaces, i.e. natural stone and wooden surfaces, or take appropriate precautions. In any case wait until the de-scaling agent is used up and the tank is empty.
24 18.1 Decalcifying without display request Decalcifying without display request is only possible if the Claris plus filter is NOT programmed. Press the Rotary Switch (1) until FILTER – appears. Turn the Rotary Switch (1) until MAINTENANCE appears.
25 21. Messages Cause Remedy FILL WATER Water tank is empty. Refill water Float defective Rinse or de-scale water tank FILL BEANS Bean tank is empty. Refill beans Although you have refilled beans, the Draw off a cup of coffee. The message will message still appears.
26 22. Problems Problem Cause Remedy Very loud noise coming from the Foreign body in grinding gear Drawing off pre-ground coffee still possible grinding gear Have IMPRESSA checked by JURA Service Too .
27 23. Legal information These operating instructions contain all the information required for using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during maintenance.
Een belangrijk punt na aankoop van elk apparaat Jura Capresso 13709 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Jura Capresso 13709 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Jura Capresso 13709 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Jura Capresso 13709 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Jura Capresso 13709 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Jura Capresso 13709 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Jura Capresso 13709 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Jura Capresso 13709 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
