Gebruiksaanwijzing /service van het product JURA-13549 van de fabrikant Jura Capresso
Ga naar pagina of 52
IMPRES SA Z7 Instructions for Use The Instructions for Use has been awarded the seal of approv al by the independent German T echnical Inspection Agency , TÜV SÜD, due to its easy-to-underst and style, its thoroughness and cov erage of safety aspects .
2 T able of contents Y our IMPRES SA Z7 IMPORT ANT SAFEGU ARDS 4 Control elements 8 Import ant information 10 Proper use ..................................................................................................................................
3 T able of contents Unit for amount of w ater ........................................................................................................................... 34 Language ....................................................................
4 Import ant Safeguards These safeguards apply for machine s with UL safety test (see r ating plate and chapter 9 ‘T echnical data’). When using electrical appliances, basic safety precautions should alwa ys be follow ed, to reduce the risk of fire , electric shock, and/or injury to per sons, including the follo wing: Read all instructions.
5 Import ant Safeguards a. A shor t power supply cord is pro vided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Y our IMPRESSA has a 3-pin grounded plug. b. Longer extension cords are available and ma y be used if care is exercised in their use .
6 Import ant Safeguards K eep your hands and the cord a wa y from hot part s of the Z appliance during oper ation. Never c lean with scouring powders or hard implements. Z Z Never fill instant coff ee, c hocolate mix etc. int o the grinder or ground coffee funnel (grinder b y-pass).
7 Import ant Safeguards.
8 Control elements Control elements 1 Bean container cov er 2 W ater tank cov er 3 W ater tank 4 Pow er switch and mains cable (side view) 5 Height-adjustable cappuccino frother 6 Coffee grounds conta.
9 Control elements 1 Q On/Off butt on 2 g Rotary Switc h 3 c Maint enance button 4 z Milk button 5 q Latte Macchiato button 6 p Cappuccino button 7 e Special Coffee button 8 Display 9 m Hot W ater but.
10 Important information Impor tant information The machine is designed and intended for priv ate domestic use . It should only be used for coffee prepar ation and to heat milk and wat er . Use for any other purpose will be deemed improper . JURA Ele- ktroapparat e AG cannot acc ept any responsibility for the conse- quences of improper use .
11 Important information There is a risk of scalds or burns on the spouts and the cappuccino frother . Place the machine out of the reach of c hildren. U Do not touch any hot parts. Use the handles provided. U Ensure that the cappuccino frother is correctly fitted and U clean.
12 Important information People , including children, who do not have the ph ysical, sensory or ment al capabilities to use U the machine safely or are inexperienced or lack knowledge in ho w to use the machine U safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly .
13 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the internet. Y ou can download @ short operating instructions for your machine from the JURA website www .jura.com. Y ou will also find interesting and up-to -date information on y our IMPRESSA and on every aspect of coffee.
14 1 Preparing and using for the first time T Open the bean cont ainer cov er and remov e the aroma pres- ervation cov er . T Remo ve any dirt or foreign objects from inside the bean container . T Fill the bean container with coffee beans, then close the aroma preservation cover and the bean c ontainer cover .
15 1 Preparing and using for the first time Y our IMPRESSA no longer has to be descaled if y ou are using the CLARIS Blue filter cartridge. Perform the ‘inserting the filter’ operation without any inter - E ruptions. This will ensure that your IMPRES SA alw ays produces its best.
16 1 Preparing and using for the first time Y ou can interrupt rinsing of the filter at any time b y pressing E any button. Press the Maintenanc e button c to c ontinue rins- ing of the filter . The wat er may be slightly discoloured. This is not harmful t o E health and does not affect the taste.
17 1 Preparing and using for the first time g T T urn the Rotary Switch until HARDNESS 25°dH is dis- play ed. k T Press the Rotar y Switch to c onfirm the setting. CONFIRMED appears briefly on the display . HARDNESS g T T urn the Rotar y Switch until EXIT is displa yed.
18 2 Preparation 2 Preparation Y ou can stop preparation of a speciality coffee , milk speciality E or hot wat er at any time . Just press any button. Before and during the grinding oper ation you can.
19 2 Preparation Y our IMPRESSA can prepare a latt e macc hiato or cappuccino at the touch of a button. There is no need to mo ve the glass or c up. Example : Proceed as follo ws to prep are one latte macc hiato. T Attach the milk pipe to the cappuccino frother .
20 2 Preparation Example : Proceed as follo ws to prepare milk foam. T Attach the milk pipe to the cappuccino frother . Use the long pipe for a milk carton/bottle and the shor t pipe for the milk container . T Inser t the other end of the milk pipe into a milk carton/bot - tle or connect it to the milk container .
21 2 Preparation Example : Proceed as follows t o prep are an espresso using pre- ground coffee . T Place an espresso cup under the coffee spout. T Open the cover of the bean container .
22 2 Preparation Preparation stop s. CONFIRMED and ENJOY appear briefly on the display . The set amount of water for one c of- fee will be permanently stored. COFFEE READY appears on the display . Y ou can alter this setting at any time by repeating the abo ve E procedure .
23 3 Daily operation 3 Daily operation When the IMPRESSA is swit ched on, it automatically prompts you to perform the rinse operation. Start the rinse operation b y pressing the Maintenance button c .
24 3 Daily operation When you switc h your IMPRES SA off , the spouts used to prepare a speciality coffee are rinsed. T Place a receptacle under the c offee spout and another under the cappuccino frother . Q T Press the On/Off button. GOODBYE , the spouts used to prepare a specialit y coffee or milk are rinsed.
25 4 Permanent settings in programming mode 4 Permanent settings in progr amming mode Y ou can make permanent settings in progr amming mode. Y ou can navigate through the progr amme items and permanently sav e the required settings simply by turning and pressing the R otar y Switc h.
26 4 Permanent settings in programming mode Programme item Sub-item Explanation LOGO LOGO T Select the logo to be displayed when the graphic displa y is not being used to display an y other informa- tion. RESET PRODUCT , ALL PROD. , RESET ALL , EMPTY SYSTEM T Reset the permanently set v alues of all product s to the factory settings.
27 4 Permanent settings in programming mode Permanent settings in progr amming mode alwa ys follo w the same model. Example : Proceed as follow s to change the amount of milk f or a latte macchiato from 16 SEC to 20 SEC , the interval from 30 SEC to 20 SEC and the amount of water from 45 ML to 40 ML .
28 4 Permanent settings in programming mode k T Press the Rotar y Switch to ent er the programme it em. 1 LATTE MAC. / PAUSE 30 SEC g T T urn the Ro tar y Switch until 1 LATTE MAC. / PAUSE 20 SEC is display ed. k T Press the Rotar y Switch to c onfirm the setting.
29 4 Permanent settings in programming mode Example : Proceed as follo ws to change the energy-sa ving mode from ENERGY SAVE NO to ENERGY SAVE LEVEL1 . Precondition: COFFEE READY is displa yed. k T Press and hold the Rotary Switch until MAINTENANCE appears.
30 4 Permanent settings in programming mode g T T urn the Rotar y Switch until EXIT is displa yed. k T Press the Rotar y Switch to exit progr amming mode. COFFEE READY In the programme it em RINSES you can mak e the follo wing set - tings: START RINSE U MANUAL The switch-on rinse must be star ted manually .
31 4 Permanent settings in programming mode g T T urn the Rotar y Switch until EXIT is displa yed. k T Press the Rotar y Switch to exit progr amming mode. COFFEE READY Y ou can change all product names, the welcome text and the clos- ing text. Example : Proceed as follows to change the product name from 1 COFFEE to MY COFFEE .
32 4 Permanent settings in programming mode g T T urn the Rotar y Switch until EXIT is displa yed. k T Press the Rotar y Switch to exit progr amming mode. COFFEE READY Y ou can choose which logo is display ed when the display is not being used to display an y other information.
33 4 Permanent settings in programming mode Example : Proc eed as follows t o reset the values f or ‘Espresso’ to the factory settings. Precondition: COFFEE READY is displa yed. k T Press and hold the Rotary Switch until MAINTENANCE appears. g T T urn the Rotar y Switch until RESET is displa yed.
34 4 Permanent settings in programming mode The maintenance status can also be display ed in addition to E the number of performed maintenance programmes. The bar shows the current maint enance status. When the bar is com- pletely filled, your IMP RESSA will request the respective main- tenance progr amme .
35 4 Permanent settings in programming mode g T T urn the Rotar y Switch until LANGUAGE ENGLISH is display ed. k T Press the Rotar y Switch to ent er the programme it em. LANGUAGE ENGLISH g T T urn the Rotar y Switch until SPRACHE DEUTSCH is dis- play ed.
36 5 Maintenance 5 Maintenance Y our IMPRESSA has the follo wing integr ated maintenance pro- grammes : Cleaning the cappuccino frother U Rinsing the cappuccino frother U Changing the filter U Cleanin.
37 5 Maintenance After each milk preparation, the IMPRES SA prompts you to run a cappuccino rinse . Precondition: COFFEE READY / CAPPU RINSE is display ed and the Maintenance button c lights up. T Place a receptacle under the cappuccino frother . c T Press the Maintenance button.
38 5 Maintenance T Place another receptacle under the cappuccino frother . c T Press the Maintenance button. CAPPUCCINO CLEANING , the cappuccino frother and the pipe are cleaned. WATER FOR CAPPUCCINO / PRESS BUTTON T Rinse the receptacle thoroughly , fill it with 250 ml of fresh wat er and immerse the milk pipe in the water .
39 5 Maintenance If you do not w ant to start changing the filter just yet, turn the E Rotary Switch until CHANGE / START NO is displayed. Press the Rotary Switch to exit the maintenanc e programme . The prompt to change the filter remains active . c T Press the Maintenance button.
40 5 Maintenance The cleaning progr amme lasts approximately 20 minutes. E Do not interrupt the cleaning progr amme . The quality of E cleaning will be impaired if you do so . JURA cleaning tablets are available from stockists. E Precondition: COFFEE READY / CLEAN is displayed and the Maintenance button c lights up.
41 5 Maintenance The IMPRESSA builds up depo sits of limescale over time and auto- matically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your w ater . If the descaling agent comes into contact with the skin or eyes, this can cause irritation.
42 5 Maintenance c T Press the Maintenance button. TRAY / GROUNDS EMPTY T Empt y the drip tray and c offee grounds container and put them back into the machine . SOLVENT IN TANK T Remov e and empty the water tank. T Completely dissolve the contents of one blister (three JURA descaling tablet s) in a receptacle holding 600 ml of wat er .
43 5 Maintenance UNIT IS HEATING , RINSING , w ater flows out of the coffee spout. The operation st ops automatically , TRAY / GROUNDS EMPTY . T Empt y the drip tray and c offee grounds container and put them back into the machine . Descaling is now complet e.
44 6 Display messages 6 Display messages Message Cause/Result Action WATER TANK FILL The wat er tank is empt y . Y ou cannot prepare any product s. T Fill the wat er tank (see Chapter 1 ‘Preparing and using for the first time – Filling the wat er tank’).
45 6 Display messages Message Cause/Result Action COFFEE READY / CAPPU RINSE The IMPRESSA requests a cappuccino rinse . T Press the Maintenance button to start the cappuccino rinse. POWDERFUNNEL The powderfunnel for preground coffee is not fitted. T Fit the powderfunnel.
46 7 T roubleshooting 7 T roubleshooting Problem Cause/Result Action Insufficient foam is produc ed when the milk is frothed or milk spra ys from the cappuc - cino frother . The cappuccino frother is dirt y . T Rinse and clean the cappuc - cino frother (see Chapter 5 ‘Maintenance – Rinsing the cappuccino frother’).
47 7 T roubleshooting Problem Cause/Result Action Little or no wat er or steam comes out of the cappuccino frother . The pump is very quiet. The connector of the cappuccino frother may be blocked b y milk residues or limescale fragments loosened during descaling.
48 8 T ranspor t and environmentally friendly disposal 8 T ransport and environmentally friendly disposal In order to protect the IMPRESSA from fros t during transport, the system must be emptied. Precondition: COFFEE READY is displa yed. k T Press and hold the Rotary Switch until MAINTENANCE appears.
49 9 T echnical dat a 9 T echnical data V o ltage A S F D G 220–240 V ~, 50 Hz 120 V ~, 60 Hz 220–240 V ~, 50 Hz 220 V ~, 50 Hz Pow er 1350 W Safety test S F D G Energy consumption SAVE NO Approx. 23 Wh Energy consumption SAVE LEVEL1 Approx. 16 Wh Energy consumption SAVE LEVEL2 Approx.
50 Index 10 Index A Addresses 52 Automatic switch-off 29 B Bean container 8 Bean container with aroma preser vation cov er 8 Cleaning 43 Filling 13 Bus bar T echnical data 49 Button Cappuccino button .
51 Index J JURA Contac t details 52 Internet 1 3 K Knowledge Builder 1 3 L Language 34 Latte macchiato 19 M Machine Cleaning 39 Descaling 41 Rinsing 36 Setting up 13 Switc hing off 24 Switc hing on 23.
52 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparat e AG Kaffee weltstrasse 10 CH-4626 Niederbuchsiten T el. +41 62 38 98 233 Y ou will find additional contac t details for your country at @ www .
Een belangrijk punt na aankoop van elk apparaat Jura Capresso JURA-13549 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Jura Capresso JURA-13549 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Jura Capresso JURA-13549 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Jura Capresso JURA-13549 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Jura Capresso JURA-13549 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Jura Capresso JURA-13549 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Jura Capresso JURA-13549 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Jura Capresso JURA-13549 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
