Gebruiksaanwijzing /service van het product BR-DV600UA van de fabrikant JVC
Ga naar pagina of 26
INSTRUCTIONS VIDEO CASSETTE RECORDER BR-DV600UA SL96202H For Customer Use: Enter below the Serial No. which is located on the bottom of cabinet. Retain this information for future reference. Model No. BR-DV600UA Serial No. Thank you for purchasing this JVC product.
2 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
3 CAUTION ATTENTION RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE D’ELECTROCUTION NE PAS OUVRIR INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4 CONTENTS 1 INTRODUCTION 1-1 Major features .............................................. 5 1-2 Maintenance ................................................ 5 1-3 Precautions .................................................. 6 1-4 Precautions for use of head cleaning tape .
6 1-3 Precautions 1 INTRODUCTION Cassette tape 5 T ype • Only cassettes bearing the MiniDV mark can be used with this VCR. • Exclusive JVC DVM60 or DVM30 cassette tape is recommended. 5 Handling • Cassette tapes cannot be loaded upside-down. • Rewind the tape to the beginning before storage.
8 2 CONTROLS, CONNECTORS AND DISPLA YS 2-1 Front panel PHONES MIC REMOTE LOCAL EJECT OPERATE REC LEVEL CH-2/4 CH-1/3 SHIFT SET SELECT SHIFT MENU HOLD V.
10 2-3 On-screen display 2 CONTROLS, CONNECTORS AND DISPLA YS Five types of indication are available. 2. Menu switch This indication is used to set the menu switch. Shown when the [MENU] button is pressed. Press it once again to restore the previous displa y .
12 3-1 Video system connections 3 CONNECTIONS Connecting a monitor The on-screen display can be viewed on a monitor connected to the [VIDEO MONITOR OUT] connector . Connecting video equipment Connect the video device to the appropriate connector (4 types are available).
14 3-3 Other connections 3 CONNECTIONS Remote connector Connect a remote controller to the appropriate connector (three types are available). T ype of connector Connectable remote controller 1 [SERIAL] connector RM-G30 2 [REMOTE1] connector RM-G820 3 [REMOTE2] connector RM-G800/G805 P ower sockets 2 types of power supply are a vailable (A C, DC).
16 3 CONNECTIONS 5 Mixed S-VHS/VHS system This is an editing system which uses the BR-DV600UA as a feeder/player with an RS-422A serial remote controller such as the RM-G820. In this case, the BR-DV600UA cannot be used as a recorder VCR. The S-VHS/VHS VCR can be replaced with a D-9/Betacam VCR.
18 3 CONNECTIONS 5 Control via the DV connector • When the DV connector is used for control, assemble editing cannot be performed. • When the VCR is stopped via the D V connector, a command error message ma y be retur ned to the controller . This is not a malfunction.
20 4 MENU SWITCHES 4-2 Menu switch details For switch setting procedures, refer to “ Menu switch setting procedure ” . q : Factory setting (00): The number in the bracket shows the set value on the counter display . 002 OPERA TION LOCK Details: Switches the oper ation lock ON/OFF .
22 363 CONTROLLER SELECT Details: Selects the setting according to the type of remote control unit connected via the RS-422A interface. Setting: q TYPE 1 (00) : For the RM-G820. TYPE 2 (01) : For a non-linear editing system. TYPE 3 (02) : For BR-S822 swap and BR-D92 swap.
24 5 PREP ARA TION Preparing this unit for recording or playback. PHONES MIC REMOTE LOCAL EJECT OPERATE REC LEVEL CH-2/4 CH-1/3 SHIFT SET SELECT SHIFT MENU HOLD SHIFT A.
26 PHONES MIC REMOTE LOCAL EJECT OPERATE REC LEVEL CH-2/4 CH-1/3 SHIFT SET SELECT SHIFT MENU HOLD SHIFT A. DUB ADVANCE PRESET REW STOP FF REC PLAY PAUSE ON/OFF MENU OVER OVER HMSF AUD LOCK SP 32k 48k SLAVE PB NDF SERVO RF DEW AUTO OFF HOLD CH 2/4 CH 1/3 VIDEO CASSETTE RECORDER BR-DV600UA dB 40 30 20 10 0 V.
28 V.IN/A.MONI A.OUT COUNTER DV CTL TC UB CH-1/2 CH-3/4 Y/C (CPN) LINE L R MIX MIX PHONES MIC REMOTE LOCAL EJECT OPERATE REC LEVEL CH-2/4 CH-1/3 SHIFT SET SELECT SHIFT MENU HOLD SHIFT A.
30 8 EXTERNAL TIMER-ST ART FUNCTION DC 12V PGZ01945 TIMER TIME CODE COMPONENT VIDEO SYNC IN REC OFF PLAY DV IN/OUT REMOTE AUDIO 2 1 SERIAL CH 1/3 OUT OUT IN IN B-Y IN Y/C LINE OUT OUT MONITOR CH 2/4 MONITOR OUT R-Y Y IN OUT REC: Timer recording OFF: Timer function OFF PLA Y: Timer playback Commercially available timer, etc.
32 9 TIME CODE 1 Set the menu switches. ( See pages 22 and 23.) 5 Set the No. 413 <TCG SOURCE> menu switch to “ INTERNAL ” . 5 Set the No. 414 <TCG SELECT> menu switch to “ PRESET ” . 5 Set the No. 415 <TCG MODE> menu switch.
34 Reference Playback time code Time code data is recorded in the sub code area of the tape. During playback, the data in the sub code area is processed in the L TC time code format and output to the [TIME CODE OUT] connector . Playback Operation 1 Select the time code data to be displayed.
36 LIGHT ON OFF COUNTER CTL TC UB RESET OPERATE/WARNING MONITOR SELECT STATUS SHUTTER MENU FILTER 1 3200k 2 5600k 3 5600k+ND POWER NG GAIN OUTPUT WHT.BAL VTR ON OFF ALARM MONITOR S A V E S T B Y H M L.
38 12-2 RS-232C specifications 9PIN D-Sub 1 23 4 5 6 9 Pin NO. Signals Operations Direction of signals 2 RXD Receive data VTR p PC 3 TXD Transmit data VTR [ PC 4 DTR Data terminal ready VTR [ PC 5 GND Signal ground 6 DSR Data set ready VTR p PC Note: PC means a controller such as a personal computer.
40 12 RS-232C INTERF ACE Commands Description B5 F-SHUTTLE Shuttle play . The search speed is specified by sending the speed code data after this command (see the table below). B6 R-SHUTTLE Shuttle rev erse play . The search speed is specified by sending the speed code data after this command (see the table above).
42 12 RS-232C INTERF ACE Contents of ST A TUS SENSE When the ST A TUS SENSE (D7H) command is sent, the following data (5 bytes) is returned. First byte Bit No. Status When the bit is 1 7 Always 1 6 Always 0 5 SHOR T FF/REW During short FF or short REW 4 REC INHIBIT Recording is inhibited.
44 12 RS-232C INTERF ACE Menu switch setting command ED MEMOR Y SW PRESET Use this command to change the VCR ’ s menu switches . T ransmit the data (3 bytes) corresponding to the menu switch to be changed, following this command. (e.g.) Set No. 108 <VIDEO INPUT SELECT> menu switch to “ COMPONENT ” .
46 13 TROUBLESHOOTING 13-1 Warning indicators If the unit malfunctions during operation, the built-in self-diagnostics system identifies the problem and displays a warning message on the monitor and/or the counter display . Also , the [AUT O OFF] indicator may be shown on the LCD .
48 13-2 Other problems Action • Set the [REMOTE] switch to “ LOCAL ” . • Set the No. 002 <OPERA TION LOCK> menu switch to “ OFF ” . • Connect the monitor to the [MONITOR OUT] connector . • Set the No. 500 <ON SCREEN> menu switch to “ ON ” .
Een belangrijk punt na aankoop van elk apparaat JVC BR-DV600UA (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC BR-DV600UA heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC BR-DV600UA vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC BR-DV600UA leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC BR-DV600UA krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC BR-DV600UA bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC BR-DV600UA kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC BR-DV600UA . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
