Gebruiksaanwijzing /service van het product GR-DVL155 van de fabrikant JVC
Ga naar pagina of 68
ENGLISH CONTENTS AUTOMA TIC DEMONSTRA TION 6 GETTING ST ARTED 7 – 13 RECORDING & PLA YBACK 14 – 22 RECORDING ................................ 15 – 18 PLA YBACK .................................. 19 – 22 ADV ANCED FEA TURES 23 – 50 FOR RECORDING .
2 EN Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents on the cover page. • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference.
EN 3 When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper , or cloth etc.
4 EN Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry . There is also a risk of fire or electric shock. CAUTION! The following notes concern possible physical damage to the camcorder and to the user .
EN 5 PROVIDED ACCESSORIES NOTE: In order to maintain optimum performance of the camcorder , provided cables may be equipped with one or more core filter . If a cable has only one core filter , the end that is closest to the filter should be connected to the camcorder .
6 EN Automatic Demonstration takes place when “ DEMO MODE ” is set to “ ON ” (factory-preset). 䡲 Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch is set to “ AUTO ” or “ M ANU AL ” and no cassette is in the camcorder .
EN 7 GETTING ST AR TED GETTING ST ARTED CONTENTS Power .................................................. 8 – 9 Grip Adjustment ......................................... 10 Viewfinder Adjustment .................................. 10 Shoulder Strap Attachment .
8 EN Battery pack BN-V408U BN-V416U (optional) BN-V428U (optional) Charging time approx. 1 hr . 30 min. approx. 3 hrs. approx. 5 hrs. Power This camcorder ’ s 2-way power supply system lets you choose the most appropriate source of power . Do not use provided power supply units with other equipment.
EN 9 A TTENTION Before detaching the power source, make sure that the camcorder ’ s power is turned off. Failure to do so can result in a camcorder malfunction. NOTES: ● Recording time is reduced significantly under the following conditions: • Zoom or Record-Standby mode is engaged repeatedly .
10 EN GETTING ST AR TED (cont.) Grip Adjustment 1 Separate the V elcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever .
EN 11 Date/Time Settings The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback ( 墌 pg. 36, 37). 1 Set the Power Switch to “ M ANU AL ” while pressing down the Lock Button located on the switch.
12 EN GETTING ST AR TED (cont.) Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically .
EN 13 Recording Mode Setting Set the tape recording mode depending on your preference. 1 Set the Power Switch to “ M ANU AL ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. 2 Press the MENU/BRIGHT wheel in.
14 EN RECORDING & PLA YBACK CONTENTS RECORDING ................................. 15 – 18 Basic Recording ..................................... 15 Journalistic Shooting ............................... 16 Self-Recording ...........................
EN 15 RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( 墌 pg. 8) ● Grip Adjustment ( 墌 pg. 10) ● Viewfinder Adjustment ( 墌 pg. 10) ● Load A Cassette ( 墌 pg.
16 EN M A N U A L AUTO PLA Y OFF RECORDING (cont.) JOURNALISTIC SHOOTING In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction.
EN 17 FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instanta- neous change in image magnification. OPERA TION: Zoom In Slide the Power Zoom Lever towards “ T ” . Zoom Out Slide the Power Zoom Lever towards “ W ” . 䡲 The further you slide the Power Zoom Lever , the quicker the zoom action.
18 EN Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “ 00:00:00 ” (minute:second:frame).
EN 19 Rewind Button ( 2 ) Fast-Forward Button ( 3 ) Play/Pause Button ( 4 / 6 ) Stop Button ( 5 ) Power Zoom Lever (VOL.) Speaker PLA YBACK Normal Playback 1 Load a tape ( 墌 pg. 12). 2 Set the Power Switch to “ PLA Y ” while pressing down the Lock Button located on the switch.
20 EN Connections Use the provided Audio/Video cable and optional S-Video cable. T o S-VIDEO To AV Audio/Video cable [mini-plug to RCA plug] (provided) White to AUDIO L IN** Red to AUDIO R IN** T o S-VIDEO IN T o TV or VCR S-Video cable (optional) TV VCR Connector cover* Y ellow to VIDEO IN * When connecting the cables, open this cover .
EN 21 NOTES: ● It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9). ● T o monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “ AUTO ” or “ M ANU AL ”, then set your TV to the appropriate input mode.
22 EN Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption ( pg. 18). 1 Load a tape ( pg. 12). 2 Set the Power Switch to “ PLA Y ” while pressing down the Lock Button located on the switch.
EN 23 ADV ANCED FEA TURES CONTENTS FOR RECORDING ........................................... 24 – 3 1 Night-Scope ............................................................ 24 Programme AE With Special Effects .......................... 24 – 2 5 Fade/Wipe Effects .
24 EN Programme AE With Special Effects 1 Set the Power Switch to “ M ANU AL ” while pressing down the Lock Button located on the switch. 2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select “ PROGRAMME AE ” , then press it.
EN 25 SEPIA Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look. MONOTONE Like black and white films, your footage is shot in B/W . Used together with the Cinema mode, it enhances the “ classic film ” effect.
26 EN IMPORT ANT Some Fade/Wipe Effects cannot be used with certain modes of Programme AE with special effects ( pg. 24, 25). If an unusable Fade/Wipe Effect is selected, its indicator blinks or goes out. Fade/Wipe Effects These effects let you make pro-style scene transi- tions.
EN 27 Fader And Wipe Menu Menu Effect Fade in or out with a white screen. Fade in or out with a black screen. Fade in to a colour screen from a black and white screen, or fade out from colour to black and white.
28 EN Snapshot This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION 1 Set the Power Switch to “ MANUAL ” while pressing down the Lock Button located on the switch. 2 Press the MENU/BRIGHT wheel in.
EN 29 While focusing on a nearer subject While focusing on a further subject FEA TURE: Auto Focus PURPOSE: The camcorder ’ s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity .
30 EN Exposure Control Manual exposure adjustment is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing.
EN 31 White Balance Adjustment A term that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically .
32 EN For Recording Menu This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings ( pg. 33 – 35). 1 Set the Power Switch to “ MANUAL ” while pressing down the Lock Button located on the switch.
EN 33 Menu Screen Explanations CAMERA MANUAL : Factory-preset NOTES: ● Settings made in the “ CAMERA ” Menu remain effective whether the Power Switch is set to “ AUTO ” or “ M ANU AL ” . However , the menu settings can be changed only when the Power Switch is set to “ M ANU AL ” .
34 EN USING MENUS FOR DET AILED ADJUSTMENT (cont.) Menu Screen Explanations (cont.) SYSTEM MANUAL : Factory-preset NOTES: ● The “ MANUAL ” settings are effective only when the Power Switch is set to “ M ANU AL ” .
EN 35 SYSTEM DISPLA Y DEMO MODE CAM RESET ON SCREEN DA TE/ TIME TIME CODE CLOCK ADJ. OFF ON CANCEL EXECUTE LCD LCD/TV OFF AUTO ON OFF ON : Factory-preset NOTES: ● “ SYSTEM ” and “ DISPLA Y ” functions which are set when the Power Switch is set to “ M ANU AL ” are also applied when the Power Switch is set to “ PLAY ” ( pg.
36 EN COP Y OF F – MD OE SOUND MD OE 12 BI T RO S Y NCH OD E REC M STE R E O – SO UND 1 SP – – – N RE TUR O.O RE N E ON S C LC D / TV U AO T IM E T DA T E / T I ME COD E – – – FF O N R.
EN 37 Playback Sound During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture.
38 EN DUBBING Dubbing T o A VCR 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 20 and 21. 2 Set the camcorder ’ s Power Switch to “ PLA Y ” while pressing down the Lock Button located on the switch, turn on the VCR ’ s power , and insert the appropriate cassettes in the camcorder and the VCR.
EN 39 Dubbing T o A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from this camcorder onto another video unit equipped with a DV connector . Since a digital signal is sent, there is little if any image or sound deterioration.
40 EN A B 1 1 1 1 1 2 2 3 3 USING THE OPTIONAL REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible.
EN 41 Buttons 1 P AUSE IN Connector 2 MBR SET Button 3 INT . TIME Button* SELF TIMER Button* 4 REC TIME Button* ANIM. Button* 5 FF Button 6 REW Button 7 P AUSE Button 8 PLA Y Button 9 Infrared beam transmitting window 0 ST ART/STOP Button ! VISS Button* @ ZOOM (T/W) Buttons # VCR CTL Button $ A.
42 EN USING THE OPTIONAL REMOTE CONTROL UNIT (cont.) FEA TURE: Playback Zoom PURPOSE: T o magnify the recorded image up to 50X at any time during playback. OPERA TION: 1) Press PLA Y ( 4 ) to find the scene of interest. 2) Press the Zoom Buttons ( T/W ) on the remote control.
EN 43 Random Assemble Editing [R.A.Edit] Create edited videos easily using your camcorder as the source player . Y ou can select up to 8 “ cuts ” for automatic editing, in any order you like.
44 EN MAKE CONNECTIONS Also refer to pg. 20 and 21. 1 A JVC VCR equipped with a remote pause connector . . . ..... connect the editing cable to the Remote P AUSE connector . A JVC VCR not equipped with a remote pause connector but equipped with an R.A.
EN 45 SELECT SCENES 4 Point the remote control at the camcorder ’ s remote sensor . Press PLA Y ( 4 ) and then press ON/ OFF on the remote control. The Random Assemble Editing Menu appears. 5 At the beginning of the scene, press IN/OUT on the remote control.
46 EN AUTOMA TIC EDITING TO VCR 8 Rewind the tape in the camcorder to the beginning of the scene you want to edit and press P AUSE ( 6 ). 9 Point the remote control towards the VCR ’ s remote sensor and press VCR REC STBY ( q6 ), or manually engage the VCR ’ s Record-Pause mode.
EN 47 For More Accurate Editing Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want.
48 EN Audio Dubbing The audio track can be customized only when recorded in the 12-bit mode ( 墌 pg. 33). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16- bit audio, on a tape recorded in the LP mode or on a blank portion of a tape.
EN 49 Insert Editing Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints.
50 EN NOTES: ● It is recommended to use the AC Adapter as the power supply instead of the battery pack ( 墌 pg. 9). ● Never connect the PC connection cable and the DV cable simultaneously to the camcorder . Connect only the cable you wish to use to the camcorder .
EN 51 REFERENCES CONTENTS DET AILS ............................................ 52 TROUBLESHOOTING ....................... 53 – 5 6 USER MAINTENANCE ............................. 57 CAUTIONS .................................. 58 – 5 9 SPECIFICA TIONS .
52 EN DET AILS I T E M S N O T E S ❍ Perform charging where the temperature is between 10 ° C and 35 ° C. 20 ° C to 25 ° C is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. ❍ Charging times are for a fully discharged battery pack.
EN 53 If, after following the steps in the chart below , the problem still exists, please consult your nearest JVC dealer . The camcorder is a microcomputer-controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from functioning properly .
54 EN • Shooting was performed under backlit conditions. • The subject is too bright. • 10X optical zoom is selected. • The Sepia or Monotone mode is activated. • When shooting in the dark, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow Shutter .
EN 55 CONTINUED ON NEXT P AGE • The light used to illuminate the LCD monitor causes it to become hot. • This may occur when the surface or the edge of the LCD monitor is pressed.
56 EN TROUBLESHOOTING (cont.) ———— ———— • A malfunction of some kind has occurred. In this case the camcorder ’ s functions become unusable. • A malfunction of some kind has occurred. In this case the camcorder ’ s functions become unusable.
EN 57 Cleaning The Camcorder 1 T o clean the exterior , wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. 2 Press PUSH OPEN and open the LCD monitor . Wipe gently with a soft cloth.
58 EN CAUTIONS Battery Packs The supplied battery pack is a lithium-ion battery . Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: 1. T o avoid hazards . . . ... do not burn. ... do not short-circuit the terminals.
EN 59 Main Unit 1. For safety , DO NOT . . . ... open the camcorder ’ s chassis. ... disassemble or modify the unit. ... short-circuit the terminals of the battery pack. Keep it away from metallic objects when not in use. ... allow inflammables, water or metallic objects to enter the unit.
60 EN SPECIFICA TIONS Camcorder General Power supply : DC 1 1.0 V (Using AC Adapter) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx.
EN 61 Connectors S-Video Output : Y :1 V (p-p), 75 Ω , analogue C:0.29 V (p-p), 75 Ω , analogue AV Video output : 1 V (p-p), 75 Ω , analogue Audio output : 300 mV (rms), 1 k Ω , analogue, stereo DV Output : 4-pin, IEEE 1394 compliant PC : ø 2.
62 EN INDEX Controls, Connectors And Indicators M A N U A L AUTO PLA Y OFF 6 Q u w 7 8 9 o i y E 3 2 4 5 @ # 0 ! r % T R t W p $ ( q ) & ^ 1 e *.
EN 63 Controls 1 OPEN/EJECT Switch ............................ 墌 pg. 12 2 • Stop Button [ 5 ] .................................... 墌 pg. 19 • BACKLIGHT Button ............................. 墌 pg. 30 3 • Rewind Button [ 2 ] ................
64 EN INDEX Indications LCD Monitor/Viewfinder Indications During Recording 4 3 2 0 . 1 0 0 : 0 1 0 . 0 1 0 xW T BR I G H T P L C E R 5 115 : 55 0 min 6 w 1 2 4 7 6 3 5 ) 8 0 ! @ # $ 9 % ^ & * ( q 1 Appears when the Power Switch is set to “ AUTO ” .
EN 65 LCD Monitor/Viewfinder Indications During Playback 1 Displays the sound mode. ( 墌 pg. 36, 37) 2 Displays the Blank Search mode. ( 墌 pg. 22) 3 Displays the tape speed.
66 EN Indications Function Displays the battery remaining power . Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically .
EN 67 Te r m s I Icons ................................................... 墌 pg. 33 – 35 Insert Editing ............................................... 墌 pg. 49 Iris ............................................................... 墌 pg. 30 Iris Lock .
COPYRIGHT© 2002 VICTOR COMP ANY OF JAP AN, L TD. VICTOR COMP ANY OF JAPAN, LIMITED EG Printed in Japan 0102HOV * UN * VP S Self-Recording ............................................ 墌 pg. 16 Sepia ..................................................
Een belangrijk punt na aankoop van elk apparaat JVC GR-DVL155 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC GR-DVL155 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC GR-DVL155 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC GR-DVL155 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC GR-DVL155 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC GR-DVL155 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC GR-DVL155 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC GR-DVL155 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
