Gebruiksaanwijzing /service van het product GR-DVM1 van de fabrikant JVC
Ga naar pagina of 84
For Customer Use: Enter below the Serial Nos. of the GR-DVM1U camcorder and the AA-V80U AC Power Adapter/Charger . The serial numbers are located on the bottom of the GR-DVM1U and the AA-V80U. Model No. GR-DVM1U/AA-V80U Serial No. G R-D VM 1 DIGITAL VIDEO CAMERA LYT0002-038B G R-DVM1 COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD.
2 W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. W arning on lithium cell battery The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100°C (212°F) or incinerate.
3 5. V entilation Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
4 USE 1. Accessories T o avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
5 About Batteries DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as there is a risk of fire or explosion. W ARNING! Do not allow the battery terminals, or the battery itself, to come in contact with metals, as this can result in a short cir cuit and possibly start a fire.
6 TW PROVIDED ACCESSORIES AC Power Adapter/Charger AA-V80U VIDEO cable (ø 3.5, DVM1 to TV or VCR, mini-plug 4 RCA plug) Soft camera case Remote control unit RM-V708U MiniDV Cassette T ape 30 min (DVM-30) M-DV30ME Docking Station Sun hood Cleaning cloth AUDIO/VIDEO cable (Docking Station to TV or VCR, RCA plug 4 RCA plug) AUDIO cable (ø 3.
7 CONTENTS PROVIDED ACCESSORIES 6 GETTING STARTED 8 Charging The Battery Pack .................................................................... 8 Installing The Battery Pack ................................................................... 9 Indoor Use .
8 Char ging The Battery Pack Y ou can charge one battery pack at a time, or two consecutively . GETTING ST ARTED 1 SUPPL Y POWER TO CHARGER Plug the AC Adapter/Charger's power cord in to an AC outlet.
9 Installing The Batter y Pack The battery pack does not charge while in the camcorder . Before installation, make sure the battery pack has been char ged fully. 1 OPEN BA TTER Y COVER 1 Slide the open switch on the battery cover . 2 Pull open the battery cover in the direction of the arrow .
10 GETTING ST ARTED (Cont.) Indoor Use When using the camcorder indoors, you can use the AC Adapter instead of a battery . 1 SUPPL Y POWER TO ADAPTER Plug the AC Adapter/Char ger's power cord in to an AC outlet. 2 SUPPL Y POWER TO CAMCORDER Connect the AC Adapter to the camcorder .
11 Clock (Lithium) Batter y CR2025 Inser tion/Removal This battery is necessary to operate the clock and to perform date/time settings. NOTES: ● When the battery is depleted, the “ ” indicator appears in the LCD monitor after you turn the power on.
12 GETTING ST ARTED (Cont.) ON SCRE EN DIS P L A Y DA TE/T I M E END OFF OFF DEC 2 5 ’ 97 P M 5:3 0 WIDE MODE Z O OM DI S G A I N UP TO F A DE R / W I P E MENU TO P. AE / EFFECT MENU TO DATE / TIME MENU T O S Y S TEM MENU W.
13 Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 OPEN CASSETTE DOOR T urn on the power , then slide the OPEN/EJECT switch in the direction of the arrow . The cassette cover releases. Open the cover in the direction of the arrow until it locks.
14 GETTING ST ARTED (Cont.) 1 2 1 A TT ACH HAND STRAP Slide the strap through the eyelet, pulling firmly to ensure secure attachment. 1 DET ACH LENS COVER T urn the lens cover in the direction of the arrow to detach it. • T o re-attach it, turn it in the opposite direction of the arrow .
15 A Sun Hood Attachment The sun hood shields the LCD monitor from reflection so that the user can watch it with ease even under direct sunlight. It also helps protect the monitor from damage. LCD monitor Sun hood Lens Sun hood LCD monitor 1 A TTACH SUN HOOD Mount the sun hood on the LCD monitor so that it opens when you pull A up.
16 GETTING ST ARTED (Cont.) A B a b Grip Attachment Use of the grip enables stable shooting. 1 ALIGN Align the grip's screw with the camcorder's socket for tripod mounting, A with a and B with b . 2 TIGHTEN T ighten the screw in the directon of the arrow as in the illustrations.
17 TW Remote Control Unit Y ou can use the RM-V708U to control the camcorder when it’ s attached to the Docking Station. Installing The Battery The RM-V708U uses one lithium battery (CR2025). 1 PULL OUT BA TTER Y HOLDER Pull out in the direction of the arrow while pressing the knob as shown.
18 RECORDING Full Auto/Manual Operation The following chart shows you which functions are available in the Full Auto and Manual operation modes. F.AUTO PAUSE MANUAL PAUSE AUTO MANUAL Function Shooting mode selector position F(ull) AUTO mode MANUAL mode Snapshot ( Z pg.
19 Basic Recording Y ou should already have performed the necessary preparations ( Z pgs. 8 – 16). Set the shooting mode selector to "AUTO" and try recording that way before attempting to use more advanced features. NOTE: Before starting recording, make sure you set the date and time ( Z pg.
20 OFF P L A Y R E C 5 S OFF P L A Y R E C 5 S STOP PLAY REW FF RECORDING (Cont.) 1 OPEN LCD MONITOR Make sure the LCD monitor is open fully . 2 SELECT MODE Press down the lock button located on the Power Dial and turn the Power Dial to "PLA Y".
21 T ime Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from "00:00:00" (minute:second:frame).
22 RECORDING (Cont.) Holding The Camcorder 1 GRASP CAMCORDER Grasp the camcorder with the pinkie finger positioned under the bottom of the camcorder . • Be sure to use the provided hand strap. • The grip is also recommended. 2 OPEN LCD MONITOR Hold the camcorder with both hands for stable shooting.
23 IND/DISPLA Y BRIGHT Brightness Control Y ou can adjust the brightness of the LCD monitor by pressing the – / + button. 1 ADJUST BRIGHTNESS If you want to brighten the image... Press the " + " button. If you want to darken the image... Press the " – " button.
24 RECORDING (Cont.) Interface Shooting Y ou can shoot yourself while viewing your own image in the LCD monitor . 1 TIL T LCD MONITOR UPW ARD Open the LCD monitor and tilt it upward to 180 degrees so that it faces forward. 2 ST ART RECORDING Point the lens toward yourself and start recording.
25 Zoom Select any one of the three powers of magnification and get “closer” to the subject ( Z pg. 31). Simply set the zoom switch to either zoom in (toward “+”) or zoom out (toward “–”). The zoom speed is variable — the quicker you set the zoom switch, the quicker the zoom action.
26 RECORDING Advanced Features 1 OPEN LCD MONITOR Press the PUSH-OPEN switch and open the LCD monitor fully. 2 SELECT OPERA TION MODE Press the lock button located on the Power Dial and turn the Power Dial to "REC", "5S" or " ".
27 1 ENABLE SNAPSHOT SEARCH Set the Power Dial to “PLA Y”. 2 REWIND TAPE Press REW . Let the tape rewind to the begin- ning, where it stops automatically . 3 BEGIN SEARCH Press SNAPSHOT . The camcorder begins searching for the first scene recorded in Snapshot mode or where the Strobe effect was used.
28 RECORDING Advanced Features (Cont.) 3 END 5-SECOND MODE RECORDING Set the Power Dial to the “REC” or “OFF” position. T o T ake A Snapshot In The 5-Second Mode . . . ..... instead of pressing RECORDING ST ART/STOP in step 2 , press SNAPSHOT .
29 Self-Timer Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way adding the final touch to a memorable picture.
30 RECORDING Advanced Features (Cont.) Menus The Recording Menu allows you to set these functions: W ide Mode, Zoom Magnification, Digital Image Stabilizer , Gain Up, Fade/W ipe ( Z pg. 38), P .AE/Effect ( Z pg. 42), Date/T ime Menu, System Menu, and White Balance ( Z pg.
31 WIDE MODE Z O OM DI S G A I N UP TO F A DE R / W I P E MENU TO P. AE / EFFECT MENU TO DATE / TIME MENU T O S Y S TEM MEN U W.
32 WIDE MODE Z O OM DI S G A I N UP TO F A DE R / W I P E MENU TO P. AE / EFFECT MENU TO DATE / TIME MENU T O S Y S TEM MENU W.
33 I T E M –/+ BUTTON S ET MENU BUTTON SCENE B E E P/ TALLY W I ND CU T S OUND M O DE I D No . PHOTO FRAME END 5 S ON OFF 32 kHz 06 ON SCENE (5-Second Mode) T o enable this mode, open the LCD monitor fully and turn the Power Dial to "5S" while pressing the lock button.
34 RECORDING Advanced Features (Cont.) F ADE/WIPE Effects Use these to spice up the transition from one scene to the next. Y ou can also vary transitions from scene to scene. Select any one effect from the Fader/W ipe Menu. T o use effects that don’ t appear in the menu, exchange them ( Z pg.
35 CORNER WIPE: Wipe in on a black screen from the upper right to the lower left corner , or wipe out from lower left to upper right, leaving a black screen. WINDOW WIPE: The scene starts in the center of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the center.
36 DISSOL VE: The new scene gradually appears as the old one gradually disappears. CORNER WIPE: The new scene wipes in over the previous one from the upper right corner to the lower left corner . WINDOW WIPE: The next scene gradually wipes in from the center of the screen toward the corners, covering the previous scene.
37 Random V ariations RANDOM F ADER: When this function is activated, the camcorder randomly selects the effect used in scene transition (from the Fade and Wipe effects). 1 ST AR T RECORDING Press RECORDING START/STOP , and “ R ? ” appears in the LCD monitor .
38 RECORDING Advanced Features (Cont.) Exchanging F ADE/WIPE Effects Y ou can replace the 5 effects currently appearing in the menu with 5 others. After exchanging, the new effects appear in the Fader/W ipe Menu. 5 SELECT NEW EFFECT Cycle through the remaining effects by pressing the – / + button and stop when the one you want is displayed.
39 W H B K B/ W P P P P P P P R ? F ADER / W I P E CU ST OM I ZE 1 2 3 4 5 END WH I T E F A DER B L A C K F A DER DIS S O L V E CORNE R W I P E WI N D O W W I P E W H B K P I T E M –/+ BUTTON S ET MENU BUTTON Refer to page 34 on using the exchanged effects.
40 4 DISABLE P .AE/EFFECT T o turn off the selected effect, re-access the P .AE/Effects Menu and place the pointer next to “OFF” by pressing the – / + button. NOTES: ● When "PRO." is not displayed on the LCD monitor , P .AE/Effects is not available.
41 SLOW (Slow Shutter) Y ou can light dark subjects or areas even brighter than they would be under good natural lighting. B / W 1 2 Like classic black and white films, your footage is shot in B/W . Used together with the W ide Cinema function, it enhances the “classic film” effect.
42 RECORDING Advanced Features (Cont.) Exchanging P .AE/Effects Y ou can replace 5 of the effects that appear in the menu with 5 others. Refer to page 40 on using the exchanged effects. 4 SELECT EFFECT TO BE REPLACED Place the pointer next to the number of the effect you want to replace by pressing the – / + button, then press MENU .
43 Displaying The Date And Time During Recording Y ou must first set the date and time (see “Date/T ime Settings” Z pg. 12). Set “DISPLA Y” to “ON” in the Date/Time Menu. The Date/T ime appears in the LCD monitor if the Shooting mode selector is set to “MANUAL”.
44 1 SELECT MODE First make sure the LCD monitor is open fully . T urn the Power Dial to "REC" while pressing down the lock button located on the dial, and set the shooting mode selector to "MANUAL". 2 ACCESS RECORDING MENU Press MENU .
45 T o Change The Tint For Recording . . . ..... In step 2 , substitute colored paper for white. The white balance is adjusted based on the color , changing the tint.
46 1 SELECT MODE First make sure the LCD monitor is open fully . T urn the Power Dial to "REC" while pressing down the lock button located on the dial, and set the shooting mode selector to "MANUAL". 2 ACCESS MANUAL FOCUS DISPLA Y Press 4 6 .
47 1 SELECT MODE First make sure the LCD monitor is open fully . T urn the Power Dial to "REC" while pressing down the lock button located on the dial, and set the shooting mode selector to "MANUAL". 2 ADJUST EXPOSURE Press 3 . "EXP .
48 1 SELECT MODE First make sure the LCD monitor is open fully . T urn the Power Dial to "REC" while pressing down the lock button located on the dial, and set the shooting mode selector to "MANUAL". 2 CENTER SUBJECT , LOCK IRIS Press 3 .
49 OFF P L A Y R E C 5 S MENU BRIGHT IND/DISPLA Y STOP PLAY REW FF Y ou can watch what you’ve recorded in the LCD monitor . NOTES: ● Y ou can also perform a High-Speed Search by pressing and holding 2 or 3 during the PLA Y mode. The search continues as long as you hold the button.
50 PLA YBACK Basic Connections VCR/TV Connection V I D E O A U D I O 1 CONNECT CAMCORDER TO TV OR VCR Connect as shown in the illustration. • It is recommended to place the camcorder on the CAM stand for playback. ( Z pg. 10) 2 TURN ON POWER T urn the Power Dial to "PLAY" and turn on the TV/VCR.
51 Using The Remote Control During Playback Once the camcorder is attached to the Docking Station, you can use the RM-V708U remote control for regular playback, slow motion (approx. 1/10 speed ( Z pg. 53), Playback Zoom ( Z pg. 56), and P .AE/Effects ( Z pg.
52 TV Playback * Please refer to your VCR and/or TV instruction manual(s) when connecting. PLA YBACK Basic Connections (Cont.) T o VIDEO output jack AUDIO and VIDEO cables T o AUDIO input jacks (L/R) .
53 1 CONNECT DOCKING ST A TION TO TV OR VCR Connect as shown in the illustration ( Z pg. 50, 52). 2 TURN ON POWER • It is recommended to place the camcorder on the CAM stand for playback. ( Z pg. 10) 3 SELECT TV’S VIDEO MODE Set the TV to the channel or mode appropriate for video playback.
54 PLA YBACK Playback Menu MENU 48 kHz M ODE 32 kHz M ODE S Y NC HR O DIS P L A Y T I ME CODE END FU L L SOUND S OUND 1 0.
55 RECORDING SOUND DISPLAY OUTPUT SOUND 32 kHz FULL SOUND SOUND 1 Stereo sound SOUND 2 48 kHz FULL SOUND Stereo sound SOUND 1 “L” sound is output on both channels SOUND 2 “R” sound is output on both channels Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back.
56 4 LOCA TE POR TION OF MAGNIFIED SCENE Y ou can move the image on screen around to find a particular portion of the picture. While holding down SHIFT , press § (Left), © (Right), ¶ (Up) and Ä (Down) . 5 END ZOOM Press and hold W until magnification returns to normal.
57 1 SELECT OPERA TION MODE First make sure the LCD monitor is open fully . T urn the Power Dial to "PLA Y" while pressing down the lock button located on the dial. 2 ST ART PLA YBACK Press PLAY . 3 ACCESS EFFECT SELECT MENU Point the remote control at the Docking Station’ s sensor and press EFFECT .
58 OFF P L A Y R E C 5 S Docking Station Refer to “Docking Station Attachment” on page 51 for attachment procedures. Make sure the camcorder is attached to the Docking Station before beginning editing. Dubbing Y ou can copy recorded scenes from the camcorder onto a videotape.
59 TW VCR BRAND NAME BUTTONS (A) (B) GE 1 1 9 2 9 ` 9 4 MAGNAVOX 9 5 1 1 7 1 7 6 MITSUBISHI 6 7 6 8 NEC 3 7 3 8 PHILIPS 1 9 9 5 1 1 9 4 9 1 9 6 JVC A.
60 EDITING (Cont.) Random Assemble Editing Using the RM-V708U remote control, you can use P .AE/Effects and make an original edited tape. 1 MAKE CONNECTIONS Connect the Docking Station to your VCR and make sure that the playback picture and sound are available on the connected TV ( Z pg.
61 1 2 3 4 5 6 7 8 T I M E CODE TO T AL 00 : 0 0 ~ ~ ~ ~ ~ ~ ~ ~ IN OUT : : : TW OFF P L A Y R E C 5 S NOTES: ● Before Random Assemble Editing, make sure the LCD monitor indications don't appear on the TV monitor .
62 EDITING (Cont.) TW 1 2 3 4 5 6 7 8 T I ME CODE 15 : 55 TO T A L 0 9 : 02 00 : 25 ~ 02 : 05 07 : 1 8 ~ 08 : 31 03 : 33 ~ 05 : 53 0 9 : 30~1 3 : 15 .
63 3 PLA Y BACK DUBBED SCENE • If any images from the scene prior to the transition you chose for your Edit-In point were recorded, that means your VCR moves quickly from Record/Pause to Record mode. • If the scene you tried to dub starts in progress, the VCR is slow to start recording.
64 EDITING (Cont.) 7 INPUT CORRECTION DA T A Based on the diagnostics performed, ( Z pg. 63) you can now increase the V C R ’ s speed by pressing “ + ”. Y ou can also slow down the VCR ’s speed by pressing “ – ”. The adjustment range is from –1.
65 Audio Dubbing The audio track can be customized only when recorded on the 32Khz mode ( Z pg. 33) NOTE: Audio Dubbing is not possible on a tape recorded at 48 kHz, on a tape recorded in the LP mode or on a blank portion of a tape. TW 6e MIC 1 FIND EDIT -IN POINT Play back the tape to locate the point where editing will start, then press P AUSE .
66 EDITING (Cont.) TW 6w 12:34 Insert Editing Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in- and out-points.
67 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 1. No power is supplied. 2. Recording cannot be performed. 3. There is no playback picture. 4. Some functions are not available. 5. The focus does not adjust automatically. 6. The cassette won’t load properly .
68 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 10. Even though “GAIN UP” was set to “ A ”, scenes shot in dark places are not brightened. 11 . Snapshot mode cannot be used. 12. Although the SNAPSHOT button is pressed, the white border does not appear .
69 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 17. • The last selected editing scene is ending. • At the end of the last selected scene for editing, the Power Dial was set to “OFF”. • The power is off. • The previously selected P .AE/Effect was changed after the last selected scene for editing was registered.
70 TROUBLESHOOTING (Cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 21. • The Picture Wipe or Dissolve functions are in use. • Snapshot Dissolve is in progress. 22. • The Sepia or Monotone effects are activated. • Snapshot Dissolve is in progress.
71 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 29. • This may occur when the surface or the edge of the LCD monitor is pressed. 30. • The speaker volume is too great. 31. ———— 32. • Certain F ADE/WIPE, P .AE/ Effects and other functions that cannot be used togetherare selected at the same time.
72 1 CLEAN EXTERIOR Wipe gently with a soft cloth. 2 REMOVE LENS COVER Z pg. 14. 3 CLEAN LENS Blow it with a blower brush, then wipe gently with lens cleaning paper . 4 RE-A TTACH LENS COVER Do not forcefully re-attach the lens cover as this may damage it.
73 1 ! @ # $ % ^ r 2 4 5 6 7 8 9 0 t yu i o p Q MENU BRIGHT IND/DISPLA Y 3 W E & * ( q w e ) CONTROLS, INDICA TIONS AND CONNECTORS Main Unit % Power lamp ....................................... Z pg. 19 ^ Power Dial ...............................
74 CONTROLS, INDICA TIONS AND CONNECTORS (Cont.) No. NAME & FUNCTION ! Date/Time display ( Z pg. 12) @ Exposure setting indication ( Z pg. 47) # Fade/Wipe effects & P .AE/Effects indication ( Z pg. 34, 40) $ Scene indicator ( Z pg. 28) % Sound mode display ( Z pg.
75 No. NAME & FUNCTION T Head clog warning At the start of recording, appears and blinks if dirt is detected on heads. Stop recording and clean the heads using the Cleaning Cassette. ( Z pg. 79) Y Condensation warning When this indicator appears, all functions are disabled.
76 Docking Station 1 26 7 8 35 4 9 0 !& ( @^ * #% $ ^ Printer connector • Connects to the optional video printer's video output connector. This allows you to watch the image from the video printer on the LCD monitor without connecting to a television ( Z pg.
77 ABOUT DV The digital video camera converts incoming audio and video signals into digital form for recording. A video signal is composed of a luminance signal (Y) and color signals (R-Y and B-Y). These signals are identified and recorded digitally (Digital Component Recording).
78 Battery Packs The supplied battery pack is a lithium-ion battery . Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: 1. T o avoid hazard . . . ..... do not burn. ..... do not short-cir cuit the terminals.
79 2. Store cassettes . . . ..... away from heaters or other heat sour ces. ..... out of direct sunlight. ..... where they won’t be subject to unnecessary shock or vibration. ..... where they won’t be exposed to strong magnetic fields (such as those generated by motors, transformers or magnets).
80 SPECIFICA TIONS MAIN UNIT General Power : DC 6.3 V (using AC Adapter) DC 7.2 V (using Battery) Power consumption : 8.6 W Format : DV Format (SD mode) Signal format : NTSC Standard Video signal reco.
81 BA TTER Y PACK BN-V812U Power : 7.2 V/1,250mAh Dimensions : 38 mm (W) x 20 mm (H) x 70 mm (D) (1–1/2" x 13/16" x 2–13/16") Weight : Approx. 88 g REMOTE CONTROL UNIT Power : DC 3 V (Lithium Battery CR2025) Battery Life : Approx. 1 year (depending on usage) Effective distance : Approx.
82 GLOSSAR Y OF TERMS Iris W orks like the pupil of the human eye. In a well-lighted environment, the human pupil contracts to keep too much light from entering.
83 INDEX A Animation ............................................... Z pg. 33 Audio Dubbing ....................................... Z pg. 65 Auto Focus ............................................. Z pg. 46 Auto Shut off ..............................
For Customer Use: Enter below the Serial Nos. of the GR-DVM1U camcorder and the AA-V80U AC Power Adapter/Charger . The serial numbers are located on the bottom of the GR-DVM1U and the AA-V80U. Model No. GR-DVM1U/AA-V80U Serial No. G R-D VM 1 DIGITAL VIDEO CAMERA LYT0002-038B G R-DVM1 COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD.
Een belangrijk punt na aankoop van elk apparaat JVC GR-DVM1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC GR-DVM1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC GR-DVM1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC GR-DVM1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC GR-DVM1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC GR-DVM1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC GR-DVM1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC GR-DVM1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
