Gebruiksaanwijzing /service van het product GR-DVP3 van de fabrikant JVC
Ga naar pagina of 100
LYT0795-001B EN DIGITAL VIDEO CAMERA INSTRUCTIONS G R-D VP3 Please visit our Homepage on the World Wide W eb and ans wer our Consumer Sur v ey (in English only): http://www .jvc-victor .co.jp/english/index-e.html ENGLISH CONTENTS AUTOMA TIC DEMONSTRA TION 8 GETTING ST ARTED 9 – 18 VIDEO RECORDING & PLA YBACK 19 – 26 VIDEO RECORDING .
2 EN CAUTIONS: ● This camcorder is designed to be used with NTSC- type color television signals. It cannot be used for playback with a television of a different standard. However , live recording and LCD monitor/ viewfinder playback are possible anywhere.
E N 3 䡲 This camcorder is designed exclusively for the digital video cassette, SD Memory Card and MultiMediaCard. Only cassettes marked “ ” and memory cards marked “ ” or “ ” can be used with this unit. Before recording an important scene .
4 EN 5. V entilation Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
E N 5 USE 1. Accessories T o avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
6 EN • Docking Station CU-V507U • Remote Control Unit RM-V717U • CD-ROM • Audio/V ideo Cable ( ø 3.5 mini-plug to RCA plug) • Editing Cable • Battery Pack BN-V107U • AAA (R03) Battery x.
E N 7 3 2 1 5 4 How T o Attach The Grip Belt 1 Remove the pad and separate the two straps. 2 Thread one end of the strap through the eyelet, then pass the other end through the loop. 3 Repeat the same procedure to attach the strap to the other eyelet.
8 EN MO D E DE M O – ON OF F AUTOMA TIC DEMONSTRA TION Automatic Demonstration takes place when “ DEMO MODE ” is set to “ ON ” (factory-preset). 䡲 A vailable when the Power Switch is set to “ ” or “ ” and no cassette is in the camcorder .
E N 9 GETTING ST ARTED GETTING ST ARTED CONTENTS Power .................................................................. 10 – 11 Grip Adjustment ............................................................. 12 Viewfinder Adjustment ................
10 EN GETTING ST ARTED (cont.) Power This camcorder ’ s 2-way power supply system lets you choose the most appropriate source of power . Do not use provided power supply units with other equipment. CHARGING THE BA TTERY P ACK 1 Make sure you unplug the camcorder ’ s DC cord from the AC Power Adapter/Charger .
EN 11 1 2 T o battery pack mount T o DC OUT terminal T o AC outlet AC Power Adapter/Charger DC cord A TTENTION: Before detaching the power source, make sure that the camcorder ’ s power is turned off. Failure to do so can result in a camcorder malfunction.
12 EN PAUSE Grip Adjustment 1 Loosen the belt. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button and Power Switch and Power Zoom (SHUTTLE SEARCH) Ring.
EN 13 OF F FA DER / W I P E AM A E PR O G R A CA MER L MA N U A M SYSTE DSC END AY DIS P L C AN E W. BA L RE N E ON S C LC D / T V U AO T IM E T DA T E / T I ME COD E CLO CK AD J .
14 EN Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 Slide down and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically .
EN 15 REC M ODE – SP LP MENU Button Lock Button Power lamp Recording Mode Setting Set the tape recording mode depending on your preference. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, then open the LCD monitor fully or pull out the viewfinder fully .
16 EN GETTING ST ARTED (cont.) Memory card Clipped edge Card Cover Loading A Memory Card The provided memory card is already inserted in the camcorder when you receive the camcorder . 1 Make sure the camcorder ’ s power is off. 2 Open the card cover ( MEMORY CARD ).
EN 17 UXG A AU TO GA V SIZ E – – TY QUA L I – FIN E AU TO – SIZE IM A G E – XGA VGA STANDARD Picture Quality Mode Setting The Picture Quality mode can be selected to best match your needs. T wo Picture Quality modes are available: FINE and ST ANDARD (in order of quality).
18 EN Operation Mode Choose the appropriate operation mode according to your preference using the Power Switch and VIDEO/ MEMORY Switch. When the Power Switch is set to “ ” , “ ” appears. When set to “ ” or “ ” , there is no indication.
EN 19 VIDEO RECORDING & PLA YBACK VIDEO RECORDING & PLA YBACK CONTENTS VIDEO RECORDING ............................................. 20 – 22 Basic Recording .............................................................. 20 Journalistic Shooting .
20 EN BR I GH T 25 min 90 min 89 min 3 min 2 min 1 min 0 min min 180 ° 90 ° VIDEO RECORDING Power Lamp Recording Start/ Stop Button T ape remaining time indicator (Approximate) (Now calculating) (Blinking) (Blinking) (Blinking) Display Power Switch Basic Recording NOTE: Y ou should already have performed the procedures listed below .
EN 21 10 x W T 1 x W T 10 x W T 20 x W T 40 x W T Journalistic Shooting In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction.
22 EN Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “ 00:00:00 ” (minute:second:frame).
EN 23 VIDEO PLA YBACK Power Switch SHUTTLE SEARCH Ring ( 2 / 3 ) Play/Pause Button ( 4 / 6 ) Stop Button ( 5 ) Normal Playback 1 Load a tape ( pg. 14). 2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
24 EN VIDEO PLA YBACK (cont.) Connections These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.
EN 25 NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg. 1 1). ● The S-Video cable is optional. Be sure to use the YTU94146B S-V ideo cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability .
26 EN B L ANK S E ARCH 4 4 Power Switch Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption ( pg. 22). 1 Load a tape ( pg. 14). 2 Set the VIDEO/MEMORY Switch to “ VIDEO ” , then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
EN 27 DIGIT AL STILL CAMERA (D.S.C.) RECORDING & PLA YBACK CONTENTS D.S.C. RECORDING .............................................. 28 – 29 Basic Shooting (Snapshot) ......................................... 28 – 29 D.S.C. PLA YBACK ..........
28 EN SNAP M O DE – FUL L MU L T I – 4 MU L T I – 9 PIN – U P FR A M E D.S.C. RECORDING Basic Shooting (Snapshot) Y ou can use your camcorder as a Digital Still Camera for taking snapshots. NOTE: Y ou should already have performed the procedures listed below .
EN 29 T o Delete Unwanted Still Images . . . .... when unwanted still images are stored in the memory card or its memory is full, refer to “ Deleting Files ” ( pg.
30 EN 10 10 / 24 24 100 100 - 0010 0010 100 100 - 0011 0011 100 100 - 0012 0012 100 100 - 0013 0013 JAN JAN 10 10 ’ 01 01 11 11 / 24 24 JAN JAN 10 10 ’ 01 01 12 12 / 24 24 JAN JAN 10 10 ’ 01 01 13 13 / 24 24 JAN JAN 10 10 ’ 01 01 D.
EN 31 T o view video clips ( pg. 61) stored in a memory card . . . … during normal playback of image, press SET/SELECT ( pg. 86 and 87, ! SET/SELECT Button) once to engage the video clip mode.
32 EN F S FS FF 1 2 3 5 4 EXIT 100-DVC00001 VGA 6 IMAGE F S FS FF 1 2 3 5 4 EXIT 100-DVC00001 6 E-CLIP F S FS FF 1 2 3 5 4 EXIT EXPLOSION 6 SOUND S S C E E A L T N E C C E T L [ [ [ + S B / E L – T .
EN 33 1F 2S 3S 5F 4F 6F EXIT PROTECT 1 F 2 S 3 S 5 F 4 F 6 F EXIT PROTECT DPOF AT FO R M N RE TUR PR OT EC T E DE L E T Display Power Switch MENU Button If Protection is removed PROTECT Index Screen Normal playback Padlock mark Normal playback Protecting Files The Protect mode helps prevent the accidental erasure of files.
34 EN 1 F 2 S 3 S 5 F 4 F 6 F DELETE EXIT SE ECT L EXE CU T E – CA NCE L D ELE E T Deleting Files Previously stored files can be deleted either one at a time or all at once. 1 Set the VIDEO/MEMORY Switch to “ MEMOR Y ” , then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
EN 35 TO DELETE THE DISPLA YED FILE Before doing the following, perform steps 1 through 3 on page 34. 4 Press + or – to select “ CURRENT ” and press SET/ SELECT . The Deletion Confirmation Screen appears. 5 Press + or – to select “ EXECUTE ” and press SET/ SELECT .
36 EN – DPOF AL L SEL ECT RES E T AL L – EXEC UTE CANCE L DPOF Setting Print Information (DPOF Setting) This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to.
EN 37 19 00 00 00 00 03 00 2 0 2 1 2 3 2 2 EXIT 100-DVC00021 VGA 2 4 DPOF SE ECT L – EXEC UTE CANCE L DPOF TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS 1 Perform steps 1 through 4 on pg. 36. 2 Press + or – to selsect “ SELECT ” and press SET/ SELECT .
38 EN FO M AT R FO M AT R EX S T I NG I ER ASE FIL E ? S AL L EXE C U TE – C ANC E L T PR OT EC DE L E E T DPOF AT FO R M N RE TUR C ANC E L EXE C U TE D.S.C. PLA YBACK (cont.) Display Initializing A Memory Card Y ou can initialize a memory card anytime.
EN 39 ADV ANCED FEA TURES ADV ANCED FEA TURES CONTENTS USING MENUS FOR DET AILED ADJUSTMENT ............. 40 – 46 For Recording Menu ................................................ 40 – 43 For Playback Menu .......................................
40 EN OF F FADER / IP E AM A E PR O GR A CA MER L M ANUA M S YSTE DSC END AY DIS P L C AN E W W .B A L RE N E ON S C L CD / T V U AO T IM E T DA T E / T I ME COD E CLO CK AD J .
EN 41 Menu Screen Explanations CAMERA WIPE/F ADER PROGRAM AE W .BALANCE REC MODE SOUND MODE ZOOM GAIN UP DIS 12 BIT 16 BIT 10X 40X 200X OFF AGC AU T O OFF ON MANUAL TELE MACRO OFF ON SNAP MODE OFF 5S ANIM. 5S Refer to “ Fade/W ipe Effects ” ( pg.
42 EN WIND CUT Menu Screen Explanations (cont.) WIDE MODE Records with no change in the screen ratio. For playback on a TV with a normal screen ratio. Inserts black bands at the top and bottom of the screen. During playback on wide-screen TVs, the black bands at the top and bottom of the screen are cut and the screen ratio becomes 16:9.
EN 43 NOTES: ● The “ CAMERA ” settings are effective when the Power Switch is set to both “ ” and “ ” . ● The “ MANUAL ” settings are effective only when the Power Switch is set to “ ” .
44 EN MD OE SOUND MD OE 12 BI T RO SY NCH OD E REC M COP Y STE RE O – SOUND 1 SP OF F – – – – N RE TUR O.O RE N E ON SC LC D / TV U AO T IM E T DA T E / T I ME COD E – – –F F O N RE TU.
EN 45 Each setting is linked with “ DISPLA Y ” or “ SYSTEM ” , which appears when the Power Switch is set to “ ” ( 墌 pg. 42, 43). The parameters are the same as in the description on pg. 42, 43. Menu Screen Explanations (cont.) DISPLA Y SYSTEM 墌 pg.
46 EN USING MENUS FOR DET AILED ADJUSTMENT (cont.) Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg.
EN 47 5 S – 5 S OF F A N IM. FOR RECORDING 5-Second Recording Record a vacation or an important event in 5-second clips to keep the action moving. This function is available only for video recording. 1 Set the VIDEO/MEMORY Switch to “ VIDEO ” , then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
48 EN IC F I L HO M CLASS SEP I A GH T T W ILI ON E M ONO T SN O W S SP O RT G IH T SP OT L E S T ROB VI E C D EO OF F ER SHUT T 1/100 FOR RECORDING (cont.) Program AE With Special Effects 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
EN 49 SEPIA Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look. MONOTONE Like classic black and white films, your footage is shot in B/W . Used together with the Cinema mode, it enhances the “ classic film ” effect.
50 EN FOR RECORDING (cont.) Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Y ou can also vary transitions from scene to scene. IMPORT ANT: Some Fade/W ipe Effects cannot be used with certain modes of Program AE with special effects ( 墌 pg.
EN 51 Fader And Wipe Menu Menu Effect Fade in or out with a white screen. Fade in or out with a black screen. Fade in to a colour screen from a black and white screen, or fade out from colour to black and white. Fade in or out with a full-screen mosaic effect.
52 EN SNAP M O DE – FUL L MU L T I – 4 MU L T I – 9 PIN – UP FR A M E FOR RECORDING (cont.) Snapshot (For Video Recording) This feature lets you record still images that look like photographs onto a tape.
EN 53 While focusing on a nearer subject While focusing on a further subject FEA TURE: Auto Focus PURPOSE: The camcorder ’ s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm (2 ” ) to the subject) to infinity .
54 EN 3 Iris lock indicator BACKLIGHT Button FOR RECORDING (cont.) Exposure Control Manual exposure control is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing.
EN 55 White Balance Adjustment A term that refers to the correctness of color reproduction under various lighting. If the white balance is correct, all other colors will be accu- rately reproduced. The white balance is usually adjusted automatically .
56 EN F S FS FF 1 2 3 5 4 EXIT EXPLOSION 6 SOUND APPLAUSE Digital Sound Effects 12 sound effects (EXPLOSION, SIREN, LAUGHTER, RACE CAR, DOOR BELL, BUZZER, F ANF ARE, AP- PLAUSE, CHEERS, BOING, SCREAM and JEERS) pre- stored in the provided memory card can be dubbed onto a tape.
EN 57 SOUND EFFECT RECORDING 6 Press D.SOUND during recording. The “ ” moves and the selected sound effect is recorded onto the tape. • The sound effect cannot be heard from the speaker during recording. Use a headphone set to hear the sound effect.
58 EN DUBBING Dubbing T o A VCR 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 24 and 25. 2 Set the VIDEO/MEMORY Switch to “ VIDEO ” , then set the camcorder .
EN 59 DV cable (optional) Video unit equipped with DV connector T o DV IN/OUT T o DV IN/ OUT Core filter Dubbing T o Or From A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector .
60 EN COP Y OF F ON – SP 6 Play/Pause Button ( 4 / 6 ) Display Power Switch SNAPSHOT Button Dubbing Still Images Recorded On A T ape T o A Memor y Card Still images can be dubbed from a tape to a memory card. 1 Load a memory card ( 墌 pg. 16) and cassette ( 墌 pg.
EN 61 - E M A R I E L A D C Y L I P E - M R A E I C L OR C D L I I N P G E - MA S I T L AN C D L B I Y P E - MA I L C L I P COMPLETED e CAR OR E C O R D C L I P T O D T U P SH " SN APSHOT " .
62 EN 30 ° 30 ° 5 m (16 ft) 1 3 2 + – + – The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible.
EN 63 Buttons Infrared beam transmitting window Zoom (T/W) Buttons DISPLA Y Button SHIFT Button SLOW Rewind/Forward Buttons Left/Right Buttons REW Button F ADE/WIPE Button EFFECT ON/OFF Button EFFECT Button P AUSE IN Connector ST ART/STOP Button MBR SET Button SNAPSHOT Button Up Button INSERT Button Down Button A.
64 EN USING THE REMOTE CONTROL UNIT (cont.) Press T Normal playback Left or SLOW Rewind Button T o move image, press (Right) while keeping SHIFT held down.
EN 65 PLAY EFFECT EFFECT ON/OFF PLA O 1 2 3 4 5 Y F B F ACK C M S S V L O E T I E A N P R D F S O I O E F S T A B O E I O E C C N E T E C F H I O LM PLA YBACK EFFECT Select Menu Remote sensor FEA TURE: Playback Special Effects PURPOSE: T o allow you to add creative effects to the video playback image.
66 EN Audio Dub Standby mode 6e P AUSE PLA Y A.DUB STOP MIC USING THE REMOTE CONTROL UNIT (cont.) Audio Dubbing The audio track can be customized only when recorded in the 12-bit mode ( pg. 41). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16-bit audio, on a tape recorded in the LP mode or on a blank portion of a tape.
EN 67 P AUSE PLA Y STOP 6e APPLAUSE D.SOUND Audio Dub Standby mode Display Audio Dubbing Using Digital Sound Effects 1 Load the provided memory card ( pg. 16) and perform step 1 and 2 of page 66. 2 Press MENU . The Menu Screen appears. 3 Press + or – to select “ SYSTEM ” and press SET/ SELECT .
68 EN P AUSE ST ART/STOP INSERT PLA Y REW 6w STOP 12 : 34 USING THE REMOTE CONTROL UNIT (cont.) Insert Editing Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints.
EN 69 MBR SET SHIFT VCR CODE LIST VCR BRAND NAME LG/ GOLDSTAR GE MAGNAVOX MITSUBISHI NEC PHILIPS JVC DAEWOO HITACHI A B C CODE VCR BRAND NAME PHILIPS SAMSUNG SANYO SHARP SONY TOSHIBA ZENITH RCA PANASONIC CODE Random Assemble Editing [R.A.Edit] Create edited videos easily using your camcorder as the source player .
70 EN DISPLA Y MAKE CONNECTIONS Also refer to pg. 24 and 25. 1 A JVC VCR equipped with a Remote P AUSE connector . . . ... connect the editing cable to the Remote P AUSE connector . A JVC VCR not equipped with a Remote P AUSE connector but equipped with an R.
EN 71 1 2 3 4 5 6 7 8 –– : –– ~ ~ ~ ~ ~ ~ ~ ~ – – : –– 0 : 00 0 –– TOT AL COD E TI M E N IO U T MO D E PLA Y CANCEL R.A.EDIT ON/OFF F ADE/WIPE EFFECT EDIT IN/OUT SELECT SCENES 4 Point the remote control at the camcorder ’ s remote sensor .
72 EN P AUSE ST ART/STOP VCR REC STBY R.A.EDIT ON/OFF 1 2 3 4 5 6 7 8 00 :2 5 ~ 02 : 05 –– 0 7:1 8 ~ 08 : 31 –– –– 0 3 : 33 ~ 05 : 53 13 : 15 15 : : 55 ~ ~ ~ ~ 16 : 29 –– –– ––.
EN 73 R.A.EDIT ON/OFF 1 2 3 4 5 6 7 8 –– : –– ~ ~ ~ ~ ~ ~ ~ ~ –– N IO U T MO D E RO SYN CH O. 1 – – – : –– 0 : 00 0 TOT AL COD E TI M E For More Accurate Editing Some VCRs make the transition from Record-Pause to Record mode faster than others.
74 EN SYSTEM CONNECTIONS T o DV IN/OUT DV cable (optional) To D V connector PC with DV connector PC T o USB USB cable (optional) T o USB connector Core filter Core filter OR [A] Using USB cable [B] Using DV cable NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg.
EN 75 V ideo unit equipped with a DV connector Connection T o A Video Unit Equipped With A DV Connector Connection to the GV -DT3 Digital Printer (optional) allows you to print out images or transfer them to a PC. It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector .
76 EN REFERENCES REFERENCES CONTENTS DET AILS .................................................................... 77 TROUBLESHOOTING ............................................ 78 – 83 USER MAINTENANCE .............................................
EN 77 DET AILS I T E M S N O T E S ❍ Perform charging where the temperature is between 10 ° C and 35 ° C (50 ° F and 95 ° F). 20 ° C to 25 ° C (68 ° F to 77 ° F) is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete.
78 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION TROUBLESHOOTING 1. No power is supplied. 2. “ SET DA TE/TIME! ” appears. 3. Recording cannot be performed. 4. There is no picture. 5. Some functions are not available using the MENU Button. 6. The focus does not adjust automatically .
EN 79 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 9. In the 5-Second mode, recording ends before 5 seconds have elapsed. 10. Snapshot mode cannot be used. 11 . The color of Snapshot looks strange. 12. The image taken using Snapshot is too dark. 13. The image taken using Snapshot is too bright.
80 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 18. The Picture W ipe and Dissolve functions do not work. 19. The picture wipe function does not work. 20. Scene transition does not go as expected. 21. The V ideo Echo mode does not work. 18. • The last selected editing scene is ending.
EN 81 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 22. Even when Slow Shutter is not selected, the image looks like it is activated. 23. There is no strobe when the Classic Film or Strobe mode is activated. 24. White Balance cannot be activated. 25. When shooting a subject illuminated by bright light, vertical lines appear .
82 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 33. • Certain Fade/W ipe effects, certain modes of Program AE with special effects, “ DIS ” and other functions that cannot be used together are selected at the same time. 34. • The LCD monitor and the viewfinder are made with high-precision technology .
EN 83 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 42. The LCD monitor , the viewfinder and the lens have become dirty (ex. fingerprints). 43. An unusual mark appears. 44. An error indication (E01 — E06) appears. 45. The charger indicator on the AC Power Adapter/Char ger does not light.
84 EN USER MAINTENANCE OPEN/EJECT Switch PUSH HERE Cassette holder Cleaning The Camcorder 1 T o clean the exterior , wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.
EN 85 INDEX Docking Station 1 Multi Connector The Docking Station can be connected with this camcorder through this connector . Never touch it with your hand or hit it with a hard object; if the pins are damaged, the connectors will become unusable due to contact failure.
86 EN INDEX Controls, Connectors And Indicators # 1 3 2 6 8 9 0! @ $ % ^ & * 4 5 ( 7.
EN 87 Controls 1 E-MAIL CLIP REC Button ...................... 墌 pg. 61 2 MENU Button ...................................... 墌 pg. 40 3 • +, – Button ........................................ 墌 pg. 40 • LCD Monitor Brightness Control [MONIT OR BRIGHT +, – ] .
88 EN INDEX Indications LCD Monitor/Viewfinder Indications During Video Recording Only 1 Appears when in the Squeeze or Cinema mode. ( 墌 pg. 42) 2 Displays the selected Fade/W ipe effect. ( 墌 pg. 50, 51) 3 Rotates while the tape is running. ( 墌 pg.
EN 89 LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording 3 40 x BR W IG H T T JA 1 N 0: 1 0 0 0 ’ PHOTO 0 A 1 M $ 9 0 ! @ 2 3 1 4 5 6 8 7 # 1 Appears when the Power Switch is set to “ ” .( 墌 pg. 18) 2 Appears when “ GAIN UP ” is set to “ AUT O ” and the shutter speed is automatically adjusted.
90 EN INDEX Indications (cont.) LCD Monitor/Viewfinder Indications During Video Playback 1 Displays the sound mode. ( 墌 pg. 44, 46) 2 Displays the Blank Search mode. ( 墌 pg. 26) Displays the selected Digital Sound Effect. ( 墌 pg. 32, 56) 3 Displays the tape speed.
EN 91 Indications Function Displays the battery remaining power . Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically .
92 EN Indications Function ● Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( 墌 pg. 68) ● Appears if INSERT ( w ) on the remote control is pressed when the erase protection tab is set to “ SA VE ” .
EN 93 General Batter y Precautions If the remote control is not functioning even if it is being operated correctly , the batteries are ex- hausted. Replace them with fresh ones. Use only the following batteries: AAA (R03) size x 2 Please make note of the following rules for battery use.
94 EN CAUTIONS (cont.) Memor y Cards T o properly use and store your memory cards, be sure to read the following cautions: 1. During use . . . .... make sure the memory card bears the SD or MultiMediaCard mark. .... make sure the memory card is positioned properly when inserting.
EN 95 Declaration of Conformity Model Number : GR-DVP3U T rade Name : JVC Responsible party : JVC AMERICAS CORP . Address : 1700 V alley Road W ayne, N.
96 EN TERMS F Fade-In/Out ........................................ 墌 pg. 50, 51 Fast-Forward The T ape .............................. 墌 pg. 23 5-Second Recording Mode ....................... 墌 pg. 47 Frame-By-Frame Playback .....................
EN 97 P Picture Quality Mode ................................ 墌 pg. 17 Picture W ipe/Dissolve ......................... 墌 pg. 50, 51 Playback Special Effects ............................ 墌 pg. 65 Playback Zoom ...................................
98 EN SPECIFICA TIONS Camcorder For General Power supply : DC 6.3 V (Using AC Power Adapter/Charger) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx.
EN 99 For Connectors AV Video output :1 V ( p-p ) , 75 Ω , analog Audio output : 300 mV (rms), 1 k Ω , analog, stereo DV Input/output : 4-pin, IEEE 1394 compliant AC Power Adapter/Charger AA-V100U Power requirement U.
COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD. Printed in Japan 0201HOV * ID * YP VICTOR COMP ANY OF JAPAN, LIMITED EN G R-DVP3 U.
Een belangrijk punt na aankoop van elk apparaat JVC GR-DVP3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC GR-DVP3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC GR-DVP3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC GR-DVP3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC GR-DVP3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC GR-DVP3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC GR-DVP3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC GR-DVP3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
