Gebruiksaanwijzing /service van het product MP-XP7230GB van de fabrikant JVC
Ga naar pagina of 126
LET0235-002A INSTRUCTIONS Before Use Read and follow the instructions of this manual to use your Mobile mini note PC correctly. Always read the "Safety Precautions" and "Operation Notes." Keep this manual and the warranty card for further reference.
2 EN It is recommended that you . . . .... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe use of this product. SAFETY PRECAUTIONS NOTES: ● The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit.
EN 3 CAUTIONS: ● This Mobile mini note PC is designed to be used with the JVC BN-LS12E/LL21E battery packs and, to rechar ge them or to supply power to the Mobile mini note PC from an AC outlet, use the provided AC Adapter and Power Cord.
4 EN CAUTION T o reduce the risk of fire, use only No. 26 A WG or lar ger telecommunication line cord. IMPOR T ANT SAFETY INSTRUCTIONS: 1. A void using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
EN 5 Lithium-ion is vulnerable in colder temperatures. About Batteries DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.
6 EN • Mobile mini note PC • MP-ACX1E AC power adapter (including dedicated AC cable) • T wo Application CD-ROMs • Instruction manual (this book) Lithium ion battery pack • BN-LL21E Large-ca.
EN 7 JVC Software License Agreement Important: Thank you for pur chasing JVC Mobile mini note PC ("Product"). Please carefully read this End-User License Agreement (“Agreement”) before installing or using JVC original software accompanied with or pre-installed into the Product (“Software”).
8 EN 5. Limited W arranty (1) THE SOFTWARE IS PROVIDED “AS IS” WITHOUT W ARRANTY OF ANY KIND. SHOULD THERE BE ANY PROBLEM ARISING FROM OR CAUSED BY THE SOFTW ARE, YOU SHOULD SETTLE ALL SUCH PROBLEM A T YOUR OWN COSTS AND RESPONSIBILITIES. (2) THIS SECTION PROVIDES JVC’S EXCLUSIVE W ARRANTY REGARDING THE SOFTW ARE.
EN 9 END-USER LICENSE AGREEMENT Important: Please carefully read this End-User License Agreement ("Agreement") before installing or using the G.
10 EN 6. Limitation of Liability JVC WILL HA VE NO LIABILITY WITH RESPECT TO ITS OBLIGA TIONS UNDER THIS AGREEMENT OR OTHER WISE FOR CONSEQUENTIAL, EXEMPLAR Y , INCIDENT AL OR PUNITIVE DAMAGES EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
EN 11 T able of contents SAFETY PRECAUTIONS ....................................... 2 SOME DO’S AND DON‘TS ON THE SAFE USE OF EQUIPMENT .......................................... 3 WHEN USING THE WIRELESS LAN .................... 4 RADIO WA VES EMITTED FROM WIRELESS LANS .
12 EN P ARTS AND COMPONENT NAMES Y our Mobile PC has the following parts and components. Built-in lithium ion battery pack Display panel Buckle i-Link connector RESET button Keyboard Speakers V entila.
EN 13 Wireless LAN antenna (model MP-XP7230GB only) Wireless LAN antenna (model MP-XP7230GB only) XP72305230E_02_22 2/25/3, 6:23 PM 13.
XP72305230E_02_22 2/25/3, 6:23 PM 14.
SETTING UP 1 XP72305230E_02_22 2/25/3, 6:23 PM 15.
16 EN ( ) SETTING UP When you first use your Mobile PC, always plug the AC power cord into the DC Input connector. The built-in lithium-ion battery pack will be recharged during your PC setup. T o avoid data loss due to power failure or any others cause, check the points for battery recharging in Page 18.
EN 17 3. Open the display panel Buckle 1 Slightly pull up the buckle of the Note PC, and the display panel will be unlocked. 2 Carefully open the display panel to the desired angle.
18 EN 5. Make sure that the battery pack is fully charged T o avoid an interruption of your operation due to power failure, check the battery voltage when you start to use your PC in the field. See "Checking the battery level" (see Page 76) to check the battery voltage level.
EN 19 1 2 or SD 1 A 1 A TURN-ON T urning (On/Off) Key On Press the (On/Of f) key . The PC will turn on and the Windows logo will appear . Cautions ¡ T urn Off the PC (On/Off) key in areas such as hospitals and air craft where use of the PC is prohibited.
20 EN Initial Setup of Microsoft Windows When using your PC for first time, you must prepare to use Microsoft Windows. Once you have finished the initial W indows setup, you can use the software and various PC functions. Use the following procedure to initially set up Microsoft W indows.
EN 21 6. Enter the user name and click [Next]. The "Thank you!" screen will appear . T ips The name you have entered is shown on the "welcome" screen that appears when you turn the PC power switch on after initial W indows setup. T o start up Microsoft W indows, click the user name shown on the screen.
22 EN T urn-Of f Cautions • Always use this procedure to turn off the PC. Otherwise, your PC may fail. 1. Click [start]. The "start" menu will appear . 2. Click [T urn Off computer]. The "T urn off computer" screen will appear . 3.
EN 23 JVC ORIGINAL SOFTW ARE AND SYSTEM APPLICA TIONS 2 XP72305230E_23_33 2/25/3, 5:44 PM 23.
24 EN JVC ORIGINAL SOFTW ARE AND SYSTEM APPLICA TIONS JVC ORIGINAL SOFTW ARE T o use the JVC original software, you must set it up in the "Original Software Setup Procedure" given below . Y ou can setup the following software programs. Setup software • CC converter (See Page 27.
EN 25 4. When the software has been set up, a prompt for PC restarting appears. Click [Finish] to restart the PC. Cautions This setup cannot install all DVC utilities. After you have set up the original software, plug the DVC cable into the USB socket of your PC.
26 EN 1 Click [Continue Anyway]. 2 The driver will be installed automatically . 3 When "Completing the Found New Hardware W izard" message appears, click [Finish]. 2) If "The hardware: JVC W eb Camera" message appears: 1 Click [Continue Anyway].
EN 27 About the expansion effect modes (see next page for details) About the intensity (see next page for details) CC Converter This is a data-band expansion system JVC has developed for audio applications. It reproduces the timbre of the original sound from high-quality and compressed music data as well.
28 EN The following menu options are ef fective only when you have checked the "Enable" option. About the expansion effect modes One of the following three effect modes can be selected. Each has its own special characteristics as described below depending on the frequency band pattern which is to be expanded.
EN 29 ¡ About CC converter Shows the CC converter version and other information. Click [OK] to close the displayed subwindow . ¡ Exit Quits the CC converter . The CC converter status you have set at this point is held. If you wish to restart the CC converter , you can start up the program from the Start menu.
30 EN ST ANDARD APPLICA TION Y our Mobile PC has the following standard applications. Open the Help menu of each application to check the application usage. If you have any question, contact the nearest support centre listed on Page 100. ¡ Acrobat Reader 5.
EN 31 ¡ Pinnacle Studio 8 SE (only MP-XP7230GB) The video editing software for the broadband age. This software makes it possible to capture moving pictures or still pictures from a digital video camera or digital camera, add various video effects and output them to a digital video camera or create movies in a variety of formats.
32 EN T o Set Up the Standard Applications Again Y ou can set up the standard applications using the Application CD-ROM. (The optional CD- ROM drive is required.) If you have erroneously deleted any of the standard applications, you can reinstall it from the Application CD-ROM.
EN 33 NA VIGA TE IN THE INTERNET WORLD! 3 XP72305230E_23_33 2/25/3, 5:44 PM 33.
34 EN NA VIGA TE IN THE INTERNET WORLD! TO CONNECT TO THE INTERNET Y ou must contract with an Internet service provider . Also, you need to have a telephone line to be connected to the service provider .
EN 35 Connection of T elephone Line and Modem Setup Y our PC has a built-in modem and a cable attached to it. Y ou can enjoy the Internet and e-mail services by simply connecting your PC to the telephone line. 1. Plug the attached modem cable into the Modem jack of your PC until it clicks.
36 EN 3. Seting up the modem 1 Click [start] and [Control Panel] in this order . 2 Click [Printers and Other Hardware]. 3 Click [Phone and Modem Options]. 4 When the "Location Information" screen appears, enter a city code in the "area code" field.
EN 37 The Internet Connection Setup Use the following procedure to connect your PC to the Internet network. This setup example uses the built-in modem of your PC and Microsoft’s Internet Explorer (IE) for the Internet connection.
38 EN 3. Click [Connect to the Internet] option, and click [Next]. The "Getting Ready" screen will appear . 4. Click [Set up my connection manually] option, and click [Next]. The "Internet Connection" screen will appear . 5. Click [Connect using a dial-up modem] option, and click [Next].
EN 39 7. Enter the phone number , and click [Next]. The "Internet Account Information" screen will appear . 8. Enter the User name and Password (and enter the password again for confirmation), and click [Next]. The "Completing the New Connection Wizard" screen will appear .
40 EN Tips If you need to set up the DNS server address, follow steps 10 to 20. Y ou may need to set up DNS server addresses (the primary and secondary DNS addresses) for some providers. If the DNS server addresses are stated on the documents sent from your provider , you need to set them up.
EN 41 15. Click [Networking]. 16. Click [Internet Protocol (TCP/IP)] and click [Properties]. The "Internet Protocol (TCP/IP) Properties" screen will appear . 17. Click [Obtain an IP address automatically], click [Use the following DNS server addresses], and enter the DNS server address printed on the document sent from the provider .
42 EN Connecting to the Internet After you have completed the "The Internet Connection Setup" procedure (pages 37 to 41), you can connect to the Internet. Use the following procedure. 1. Click [start] and click [Internet] at the upper left part of the Menu.
EN 43 Disconnection from the Internet When you are connected to the Internet, the use of the telephone line and the access to the provider are char ged. Disconnect your PC from the Internet in one of the following ways when you are finished using the Internet.
44 EN Accessing a W eb Page There is a lar ge number of Web sites available. Y ou can access a W eb site using Microsoft’ s Internet Explorer in your PC.
EN 45 E-MAILING Y ou need to set up a mailing software to send and receive E-mails. Setting up E-Mail Software Set up the E-mail transmission using the Outlook Express installed on your PC. Tips It is convenient for E-mail setup if you have the document sent from the provider to hand.
46 EN NA VIGA TE IN THE INTERNET WORLD! 3. Enter your E-mail address in the "E-mail address" field, and click [Next]. The "E-mail Server Name" screen will appear . 4. Enter the "Incoming mail server" and "Outgoing mail server", and click [Next].
EN 47 5. Enter the "Account name" and "Password," and click [Next]. The "Congratulations" screen will appear . 6. Click [Finish]. The "Congratulations" screen will close, and Outlook Express will start up. The setup for the E-mail software is complete.
48 EN NA VIGA TE IN THE INTERNET WORLD! Sending and Receiving E-mails Y ou can create and send E-mail messages, and receive and read E-mail from others. Y ou can learn procedures to enjoy E-mailing. Use Outlook Express installed on your PC for E-mail transmission.
EN 49 3. Create a message. Destination: Enter the receiver's E-mail address. (Enter your E-mail address first to test E-mail transmission.) Title: Enter the message title. 4. Click [Send] at the left upper end of the screen to send the created message.
50 EN NA VIGA TE IN THE INTERNET WORLD! 7. T o check the received messages, click [Inbox] on the screen. The received E-mail messages will be displayed.
EN 51 HARDW ARE 4 XP72305230E_34_51 2/21/3, 7:11 PM 51.
52 EN Using the Pointing Device The pointing devices allow you to move the mouse pointer on the screen. Y ou can move the cursor using the centre stick and three buttons in the similar way as the mouse. ¡ Stick operations Usually operate the stick using your index finger .
EN 53 • Double-click Press the mouse left button twice in succession and release it immediately . • Drag Use this operation to move an icon or a file. T o do so, select an icon or a file, hold down the mouse left button and move it to the desired position, and release the mouse button.
54 EN HARDW ARE Using Hot keys Y ou can use the coloured hot keys of the PC keyboard. Hold down the Fn key and press one of the Hot keys to execute its command. List of hot keys F1 Reduces the screen brightness level. Use this command to reduce the brightness level if the screen is too bright.
EN 55 If a key top has come of f If a key top has come off from the keyboard, put it back in place by following the procedure below . ¡ How to attach the Enter key , left Shift key or Space key top 1 T ake out the disengaged wire rod, and snag it onto the two projections as shown in the figure below .
56 EN Increasing the (Optional) Memory Capacity Y ou can increase the PC memory capacity up to 384M bytes. For the built-in memory capacity , see the Product Specifications on Page 102. Y ou can reduce the application startup time and increase the data process speed by adding an optional memory board.
EN 57 Adding or Removing a Memory Board I f you have operated your PC, its inside may be hot and you may get a burn. T urn the power switch off and wait for the PC to cool down. 1. T urn the PC Power switch of f, and disconnect AC adapter from your PC.
58 EN 1) Mounting a memory board 1 Check the correct mounting direction of memory board (by observing the cut area). 2 Slant the memory board and insert it into its socket. 3 Push the memory board until it is locked, but do not apply excessive force t o it.
EN 59 Checking the Additional Memory Board Use the following procedure to check the memory board installation. 1. T urn on your PC and start W indows. 2. Click [start] and select [Control Panel]. 3. Click the [Performance and Maintenance] icon. 4. Click the [System] icon.
60 EN Using the SD Memory Card Slot Y our PC has an SD memory card slot. An SD memory card or multimedia card can be used. When you use an SD memory card, remove the dummy card from the SD memory card slot. 1. Remove the dummy card. 2. Insert an SD memory card.
EN 61 Using an External Monitor T o attach an external monitor to your PC, use the MP-VGX1E external display cable. Connecting an external monitor When you connect an external monitor to your PC, it looks like an ordinary desktop PC. Y ou can use the monitor by just connecting it with the MP-VGX1E cable.
62 EN • The display max resolution you can set for the external monitor is 1600 x 1200 x 32 bits, which depends on monitor performance. • When the display resolution is set to 1024 x 600 x 32-bit .
EN 63 Connecting to a network With the network function, you can connect to a network at your office or home to transfer data between PCs and access the Internet from multiple PCs. For setting for intranet connection, consult a system administrator at your company .
64 EN 4 Double-click [Local Area Connection]. The “Local Area Connection Status” screen will appear . 5 Click the [Properties] button. The “Local Area Connection Properties” screen will appear . 6 On the [General] tab, double-click [Internet Protocol (TCP/IP)].
EN 65 8 Click the [OK] button. A message prompting you to restart the computer will appear . 9 Click the [OK] button to make the change take effect. 0 Restart the computer . ¡ Checking the MAC address Use the following procedure to check the MAC address of the internal LAN card.
66 EN 5 Double-click [Local Area Connection]. The “Local Area Connection Status” screen will appear . 6 Click the [Support] tab and the [Details] button. The “Network Connection Details” screen will appear . 7 The MAC address is displayed as the “Physical Address” on the list.
EN 67 Network connections using a wireless LAN (MP-XP7230GB only) The model MP-XP7230GB PC comes with wireless LAN functions. (The MP-XP5230GB series does not come with these functions, and the details provided in “Network connections using a wireless LAN” do not apply .
68 EN HARDW ARE Suggestions for using the wireless LAN • Use the wireless LAN in a location where there are as few obstacles as possible. T o maximize the distance over which communication with the wireless LAN is possible, open the display , and point its reverse side (the side with JVC logo) at the access point.
EN 69 1 Start up the PC. 2 Set the IP address to be used by the wireless LAN. 1 Click [Start], and select [Show all connections] from [Connect T o] on the start menu. 2 Select [Wireless Network Connection] on the [Network Connections] screen, and select [Properties] on the [File menu].
70 EN HARDW ARE 3 Select [Internet Protocol (TCP/IP)] on the [General] screen of [W ireless Network Connection Properties]. 4 The [Internet Protocol (TCP/IP) Properties] screen appears. 5 Use the following example as a reference, and proceed with the settings depending on how the wireless LAN is to be used.
EN 71 For making the wireless network connection using a public wireless LAN service : With a public wireless LAN service, it is customary for the DHCP server function that automatically allocates the IP address to be enabled.
72 EN HARDW ARE When the wireless LAN status icon is clicked on the task tray , the main menu of the wireless LAN setting utility is opened, enabling the wireless LAN status to be checked or set. The color of the wireless LAN status icon indicates the connection status and signal strength status.
EN 73 2 Settings Perform the wireless LAN communication settings. This utility can retain multiple sets of setting information, and these sets can be selected for use. The settings are each managed by a [Profile]. When new settings are to be added, input the profile name of your choice, and then proceed with the settings.
74 EN HARDW ARE 3 Encryption Perform the encryption (WEP security) settings for communication. The WEP function encrypts key words and scrambles them in the transmission data. A network using a high level of security can be configured when it is activated.
EN 75 4 About The software version information and MAC address of the wireless LAN mode are displayed. [Network Driver] The network driver version information is displayed. [Configuration Utility] The configuration utility version information is displayed.
76 EN Checking the battery level On the “Power Option Properties” screen, click the [Power Meter] tab. The current total battery level is displayed. Use the following procedure. 1. Click the [start] button and [Control Panel]. 2. Click the [Performance and Maintenance] icon.
EN 77 Power-saving mode In compliance with the operation regulations of the International Energy Star Program, this unit enters the power-saving mode when no operation is performed for a certain period.
78 EN • System in standby status The built-in battery discharges whilst the PC is in system standby status. As a result, any unsaved data may be lost or the system may not start up.
EN 79 Unknown partition on hard disk IMPORT ANT!! This PC reserves the image data required for recovery as a “recovery area” in the hard disk. If you accidentally delete a partition of the recovery area, you cannot recover it.
XP72305230E_66-81 2/25/3, 5:45 PM 80.
PC RECOVER Y (REPEA TED PC SETUP) 5 XP72305230E_66-81 2/25/3, 5:45 PM 81.
82 EN PC RECOVERY (REPEA TED PC SETUP) Setting Up Y our PC Again 1. What is the Recovery? When you return your PC to the original state during shipment, it is called "PC recovery ." Y ou can recover your PC in one of the following two ways. (1) Initialize the hard disk and restore all files.
EN 83 System Recovery Procedure 1. Hold down the Alt and F8 keys and press the Power button to start up your PC. When message "Do you wish to continue? (Y/N)" appears, respond with Y . T ips • If you respond with N, the recovery is canceled.
84 EN COMPUTER WIEDERHERSTELLUNG (RECOVERY) 5. After the system recovery has been completed, the message "T urn Power switch off and restart the PC." appears. Restart your PC. Y our PC has been returned to the original state before shipment.
EN 85 TROUBLESHOOTING 6 XP72305230E-82-104 2/26/3, 8:57 AM 85.
86 EN Q&A There are several troubleshooting keys. If you are not sure how to operate your PC, your PC does not work well, or you suspect that your PC has been damaged, follow the relevant troubleshooting steps in the Q&A section. If the Q&A does not help you Contact us.
EN 87 Startup and Operation of W indows Q. The screen has hung. A. Use the following procedure to forcibly exit the applications running on your PC. Important When applications are forcibly terminated through this procedure, any unsaved unsaved data will be lost.
88 EN Q. Starting the PC in the safe mode A. If some kind of trouble occurs on the PC, use the safe mode where the PC starts up with minimum functions. Use the following procedure to start up your PC in the safe mode. 1. T urn on the PC. 2. As soon as the JVC logo appears, hold down the F8 key .
EN 89 Display Q. The PC is turned on but nothing appears on the screen. A. If the screen blacks out during operation, check the following. ¡ When the (Stand By) lamp is lit. • Move the stick or press any key on the keyboard to check if the power -saving function is working.
90 EN TROUBLESHOOTING Using the Internet Q. I cannot dial up. A. Check the connection. ¡ Check that the modem cable is connected. If you see the “There was no dial tone.” message, check the connection between the unit and the telephone line connector on the wall.
EN 91 Q. The PC dials but connection is not established. A. Check the dialing setting. ¡ Check that the dialing type (tone or pulse) is correctly set for your telephone line. For checking and configuration procedures, see “3. Setting up the modem” on page 36.
92 EN Q. The PC makes a connection operation but connection is not established. A. Check the following. ¡ Check the user name and password. Refer to the material sent from your ISP for correct user name and password. ¡ The internal modem dials but negotiation is not made.
EN 93 Wireless LAN (MP-XP7230GB only) Q. I can’ t communicate. A. Check the following. ¡ Is the device serving as the other end of the communication the kind of device which can communicate with th.
94 EN Q. How can I check the MAC address? A. Proceed as follows to check the MAC address of the PC’ s wireless LAN. * In order to check the MAC address, the wireless network connection must first be set using [Network Connections]. 1. Click the [Start] menu, and click [Control Panel].
EN 95 SD memory cards Q. The “Not formatted” or “Not initialized” error message appears when I insert an SD card, CF card or other memory card with a memory capacity exceeding 32MB into a digital camera or other device even though the card has been formatted, and I cannot use the card.
96 EN TROUBLESHOOTING Miscellaneous Q. The PC is hot. A. The PC may become warm when used for a long time, but this is not a failure. Do not block the vents in the bottom or sides through which internal heat is removed. Q. The PC makes no sound. A. Check the following ¡ Check if the speaker is muted.
EN 97 ¡ If you forget the BIOS password The following passwords can be set on the BIOS. • User password When this password is set, the user is requested to enter the password to start W indows or change a BIOS setting. • HDD password The password required for accessing the hard disk.
FRANGE & ANTWORTEN XP72305230E-82-104 2/26/3, 8:57 AM 98.
APPENDIX 7 XP72305230E-82-104 2/26/3, 8:57 AM 99.
100 EN List of Support Centres 1. ImageMixer with VCD 1.1 VJ http://www .imagemixer .com 2. Norton AntiV irus 2003 http://www .symantec.com/region/reg-eu/techsupp/index.html 3. RealPlayer 8 Basic http://www .service.real.com 4. Pinnacle Studio 8 SE http://www .
EN 101 T rademark notice 1. i.LINK refers to IEEE1394-1995 and their expanded specifications. i.LINK and the i.LINK logo are trademarks of Sony Corporation, devised to make people more familiar with IEEE 1394. 2. Microsoft, W indows, W indows Media are trademarks or registered trademarks of Microsoft Corporation in the U.
102 EN Model Name MP-XP7230GB OS Windows XP Professional MP-XP5230GB CPU Model Mobile Intel Pentium III processor-M Clock speed 933MHz Bus clock speed 133MHz Secondary cache memory 512KB Main memory 256MB, standard (128MB on-board)/384MB, max. 128MB, standard (128MB on-board)/384MB, max.
EN 103 Wireless LAN specifications (MP-XP7230GB only) W ireless frequency band 2412 to 2472 MHz (all 13 channels) Modulation system DSS (Direct Spread Spectrum system) CCK (communication speed: 5.
104 EN Options (separately available) Option name Model CD-ROM drive *1 MP-CDX1E Standard lithium ion battery pack *2 BN-LS12E Lar ge-capacity lithium ion battery pack *3 BN-LL21E Battery char ger *4 MP-BCX1E AC adapter *2 MP-ACX1GB External display cable MP-VGX1E APPENDIX *1 Connected with a PC card and powered from the Mobile mini note PC.
LET0235-002A INSTRUCTIONS Before Use Read and follow the instructions of this manual to use your Mobile mini note PC correctly. Always read the "Safety Precautions" and "Operation Notes." Keep this manual and the warranty card for further reference.
How you can use the built-in wireless LAN even more easily Y ou can reduce the wireless LAN connection time by using the accessory utility . The Instructions of this PC are written on the assumption that this accessory utility will be used. The utility can be used by taking the following steps.
Supplementary instructions for using internal wireless LAN If the wireless network connection has been disabled, the wireless LAN status icon and the wireless network icon may not appear on the taskbar . The wireless LAN ON/OFF hot keys ( Fn + F9 ) will not work, either .
LET0238-001A INSTRUCTIONS Before Use Read and follow the instructions of this manual to use your USB Port Replicator. Always read the "Safety Instructions". Keep this manual for further reference. Thank you for purchasing the JVC MP-PRX 1GB USB Port Replicator.
2 EN Dear Customer , Thank you for purchasing the JVC USB Port Replicator . This unit is to be used with JVC AC Adapter AA-E5025GB. T o avoid problems and obtain the best results, please read this instruction booklet carefully before use. W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
EN 3 Introduction This USB Port Replicator is a unique expansion unit specially designed to comple- ment the Notebook Computer and make it equivalent in many ways to a desktop PC. It provides some of the connection functions found on a desktop system.
4 EN Package Contents USB Port Replicator USB PORT REPLICA TOR MP-PRX1 AA-E5025GB AC Power Adapter USB Cable (1.8 meters long) Software CD-ROM Instruction Manual (this booklet) MP-PRX1GB p.
EN 5 Hardware Installation LED Status Indicators LED Color Descriptions POWER Red Indicates that the power is on. 2 PORT HUB Green Indicates that both USB 2.0 ports are now ready and active. LAN (10/100) Green Indicates a data transfer rate of up to 100 Mbps.
6 EN Connection to Mobile Mini Note PC Figure 2: Connection to Mobile mini note PC • Insert the jack of the AC adapter into the power adapter port ( ).
EN 7 Other I/O Por ts Figure 3: Other I/O ports USB 2.0 Ports Before connecting a USB 2.0 device to one of the USB 2.0 ports, refer to the Software Installation section of this Instruction Manual.
8 EN Software Installation STEP 1 Connect the CD-ROM drive to the Mobile mini note PC and turn it on. Insert the Software CD-ROM. Supply power to USB Port Replicator using AC power adapter . Connect the Mobile mini note PC and the USB Port Replicator using the High-Speed Cable (USB cable) included with this port replicator .
EN 9 The wizard has finished installing the software. Click Finish to continue. STEP 3 The Mobile mini note PC finds the USB Bridge Cable (USB device) of the USB Port Replicator . This wizard helps you install the device driver . Select “Install the software automatically [Recommended]” .
10 EN The wizard has finished installing the software. Click Finish to continue. STEP 4 Next the PC-Linq Software is installed to enable the data link connection between the Mobile mini note PC and other external PC via the USB file transfer data link port (DA T A LINK port).
EN 11 Click Next to continue. Setup will add the program icon to the Program Folder . Y ou may type a new folder name or select the default folder name. Click Next to continue. The PC-Linq icon will appear on the desktop. • Support Center PC-Linq software and driver http://www .
12 EN STEP 5 The Mobile mini note PC finds the Prolific USB-to-Serial Comm Port of the USB Port Replicator . This wizard helps you install the device driver . Select “Install the software automatically [Recommended]” . Click Next to continue. The wizard has finished installing the software.
EN 13 STEP 6 Installation V erification MP-PRX1GB p.m 2/21/03, 5:12 PM 13.
14 EN Appendix: Installing the PC-Linq Software and Driver in an External PC If you connect an external PC to the Mobile mini note PC via the DA T A LINK port of the USB Port Replicator , you must install the PC-Linq software and driver on the external PC as well as instructed below .
EN 15 The wizard has finished installing the software. Click Finish to continue. STEP 4A The PC-Linq Software is now installed. The “W elcome to the Install Shield Wizard for PC-Linq” dialog window appears.
16 EN Click Next to continue. Setup will add the program icon to the Program Folder . Y ou may type a new folder name or select the default folder name. Click Next to continue. The PC-Linq icon will appear on the desktop of the external PC. • Support Center PC-Linq software and driver http://www .
EN 17 Specifications Computer Port TO PC port (Upstream port) T ype B receptacle I/O Ports 2 USB 2.0 ports T ype A receptacles PS/2 KEYBOARD port Mini Din 6 pin PS/2 MOUSE port Mini Din 6 pin DA T A LINK port T ype B receptacle SERIAL port DB 9 pin male P ARALLEL port DB 25 pin female 10/100Base-T LAN port 8P8C RJ45 shielding Power DC Input 5V , 2.
LET0238-001A INSTRUCTIONS Before Use Read and follow the instructions of this manual to use your USB Port Replicator. Always read the "Safety Instructions". Keep this manual for further reference. Thank you for purchasing the JVC MP-PRX 1GB USB Port Replicator.
Setting Up of USB Port Replicator (MP-PRX1GB) Installing the device driver Note ● Log on to the computer using user with administrator privilege to install. ● If the setting for "Driver Signing Options" is set to "Block", then the device driver cannot be installed.
Een belangrijk punt na aankoop van elk apparaat JVC MP-XP7230GB (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC MP-XP7230GB heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC MP-XP7230GB vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC MP-XP7230GB leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC MP-XP7230GB krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC MP-XP7230GB bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC MP-XP7230GB kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC MP-XP7230GB . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
