Gebruiksaanwijzing /service van het product RK-C42WBT3 van de fabrikant JVC
Ga naar pagina of 16
RK-C42WBT3 Thank you for purchasing this Wall Mounting Unit. We recommend that you read this manual thoroughly before use in order to familiarize yourself with this unit. Please store this manual in a safe place after reading it. • Mounting a plasma display television requires specific technical knowledge.
2 Assembly and Mounting Warnings ● Consult authorized service personnel for the installation and attachment of this unit to the wall. This unit weighs approx. 60 kg (approx. 132 lbs.), including display monitor. Improper assembly or installation may cause the unit to fall when it is mounted, which may result in fatal accidents.
3 W arning Mounting the Wall Unit The Wall Mounting Unit should be mounted to a wall that can adequately hold the total weight of the plasma display and the Wall Mounting Unit over a long period of time and which can adequately withstand earthquakes, conceivable vibrations, and other external forces.
4 Frame Fastening Screws left/right (Spacer Ring + Flat Washer + Spring Washer) Frame Rotation Shaft Screws (left/right) Spacer Rings (left/right) Frame Attachment Lever Screws Angle Adjustment Lever Frame Rotation Jaw Plasma Display w q e X 10 r Angle Adjustment Lever Lock Screw Caution ● Consult authorized service personnel for electrical work.
5 <Before Attaching Plasma Display> 2. Push in the heads of the left and right Frame Removal Lever Screws a and lift up section b to remove the Frame q from the Wall Mounting Unit w . The Wall Mounting Unit is sold with Frame q and Wall Mounting Unit w fixed together.
6 Instructions for Assembly 1. Attach the Wall Mounting Unit w to the surface of the wall. The unit should be attached using the method most suited to the wall structure.
7 3. Identify the Rotation Shaft Screws of the Wall Mounting Unit. Check that the left and right Rotation Shaft Screws are secure, as the Rotation Jaw of the Frame (attached to the plasma display) will be inserted into the Rotation Shaft Screw Component of the Wall Mounting Unit w .
8 5. Fix the Frame and Wall Mounting Unit. Combine the Frame Fastening Screws, Spacer Rings, Flat Washers, and Spring Washers (from the two pairs of Frame Fastening Screw Components that were put aside when detaching the Frame q from the Wall Mounting Unit w ) as shown below and fasten them securely using a screwdriver.
9 <Instructions for Assembly, cont’d> Adjusting the Angle of the Plasma Display ＊ The angle of the Wall Mounting Unit can be adjusted to 0 ° , 5 ° , 10 ° , 15 ° , and 20 ° .
10 2. Place one hand on top of the plasma display to steady it and with the other hand set the Angle Adjustment Lever to 20 ° . ＊ If the Angle Adjustment Lever has already been fastened, perform this task after removing the Angle Adjustment Lever Lock Screw.
11 <Instructions for Assembly, cont’d> 3. Remove the Rotation Shaft Screws and Spacer Rings at the bottom left and right of the Wall Mounting Unit. ＊ The Rotation Shaft Screws and the Spacer Rings will be used after the cables have been connected.
12 Brace the plasma display while connecting the power cord or system cables, as the display may tip over, causing injury. 5. Connect the power cable and system cables to the plasma display. ＊ Be careful not to let the cables become caught between the plasma display and the Wall Mounting Unit.
13 7. Set the angle of the plasma display. Hold the upper part of the plasma display with one hand and set the display to the desired angle with the other hand, using the Angle Adjustment Lever on the Wall Mounting Unit. 8. Fasten the Angle Adjustment Lever.
14 1. Hold the upper middle of the plasma display and set the Angle Adjustment Lever to 0 ° . ＊ If the Angle Adjustment Lever has been fastened, remove the Angle Adjustment Lever Lock Screw before performing this task. This task must be performed by at least two persons.
15 <Instructions for Removing the Plasma Display, cont’d.> This task must be performed by at least two persons. Danger 3. Remove the Frame Fastening Screws, Spacer Rings, Flat Washers, and Spring Washers of the two Frame Fastening Screw Components at the upper left and right of the Wall Mounting Unit.
Wall Mounting Unit Exterior 13 1 20 13 13 13 1 20 13 1 20 13 13 13 1 20 2-φ5 2-φ8 2-φ5 2-φ8 2-φ5 2-φ8 2-φ5 2-φ8 2-φ5 2-φ5 2-φ8 20 89 49 20° 300 20 20 8.
Een belangrijk punt na aankoop van elk apparaat JVC RK-C42WBT3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC RK-C42WBT3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC RK-C42WBT3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC RK-C42WBT3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC RK-C42WBT3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC RK-C42WBT3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC RK-C42WBT3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC RK-C42WBT3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
