Gebruiksaanwijzing /service van het product RX-DV3RSL van de fabrikant JVC
Ga naar pagina of 76
LVT0875-009A [B] INSTR UCTIONS HOME CINEMA D VD/CD CONTR OL CENTER RX-D V3RSL TV DIRECT MASTER VOLUME DVD/SUPER VCD/VCD/CD INPUT ATT . REC MODE INPUT ANALOG/DIGITAL COMPACT SUPER VIDEO SETTING ADJUST .
G-1 W arnings, Cautions and Others IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.
G-2 CAUTION • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) • Do not place any naked flame sources, such as lighted candles, on the apparatus.
G-3 IMPORT ANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1 CLASSIFICA TION LABEL, PLACED ON EXTERIOR SURF ACE 2 W ARNING LABEL, PLACED INSIDE THE UNIT 1. CLASS 1 LASER PRODUCT 2. CAUTION : Visible and invisible laser radiation when open and interlock failed or defeated.
G-4 SAFETY INSTRUCTIONS “ SOME DOS AND DON ’ TS ON THE SAFE USE OF EQUIPMENT ” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
1 T able of Contents Par ts Identification ...................................... 2 Front Panel ................................................................................. 2 Remote Control ........................................................
2 Par ts Identification Front Panel See pages in the parentheses for details. 1 ST ANDBY/ON button and ST ANDBY lamp (11) 2 Disc tray and illumination lamp (15) 3 D VD player operation b uttons 0 (ope.
3 Par ts Identification Remote Control See pages in the parentheses for details. 1 ST ANDBY/ON buttons (11, 62 – 65) • STB, VCR, TV , A UDIO 2 Source selecting b uttons (11, 13, 61 – 65) • TV .
4 Getting Star ted Putting Batteries in the Remote Control Before using the remote control, put two supplied batteries first. • When using the remote control, aim the remote control directly at the remote sensor on the unit. 1 On the back of the remote contr ol, r emov e the battery cover .
5 Getting Star ted Connecting the FM and AM Antennas AM loop antenna (supplied) If AM reception is poor, connect an outdoor single vinyl-covered wire (not supplied). FM antenna (supplied) If FM reception is poor, connect outdoor FM antenna (not supplied).
6 AM LOOP FM 75 COAXIAL AM EXT SUB- WOOFER OUT DIGITAL 1 (STB) DIGITAL 2 (TV) PCM/STREAM FRONT SPEAKERS REAR SPEAKERS CENTER SPEAKER DIGITAL IN ANTENNA TAPE / CDR AUDIO AV IN/OUT CAUTION: SPEAKER IMPE.
7 Getting Star ted Connecting Audio/Video Components T urn off all the components and the unit bef ore connection. TV connection ■ About connecting cables/cords F or SCAR T connections The SCAR T cable is not supplied with this unit. Use the cables supplied with the other components or purchase them at y our dealer .
8 Getting Star ted ■ Digital connection Bef ore connecting an optical digital cord, unplug the protective plug. AM LOOP FM 75 COAXIAL AM EXT SUB- WOOFER OUT DIGITAL 1 (STB) DIGITAL 2 (TV) PCM/STREAM.
9 T urn off all the components and the unit bef ore connection. Illustrations of the input/output terminals below ar e typical examples. When you connect other components, r efer also to their manuals since the terminal names actually printed on the rear vary among the components.
10 Now , you can plug the power cor d of the unit into the A C outlet. CA UTIONS: • Do not touch the power cord with wet hands. • Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.
11 1 T urn On the Power Press ST ANDBY/ON on the front panel or ST ANDBY/ON A UDIO on the remote control. The ST ANDBY lamp goes off and the illumination lamp lights up.
12 T ur ning Off the Sounds T emporarily Press MUTING to m ute the sound. “ MUTING ” appears on the display and the volume turns of f (the V OLUME indication goes off). • When D VD is selected as the source with your TV turned on, “ V OLUME –” appears on the TV .
13 Selecting the Analog or Digital Input Mode When you hav e connected digital source components using both the analog connection and the digital connection methods (see pages 7 to 10), you ca n select the input mode.
14 Attenuating the Input Signal When the input le vel of the analog source is too high, the sounds will be distorted. If this happens, you need to attenuate the input signal lev el to prev ent the sound distortion. • Y ou hav e to make this adjustment for each analog source .
15 By pressing the following buttons, you can pause, adv ance , or rev erse playback, and locate the beginning of the title, chapter, or track. T o stop playback temporarily Press 8 . • Pressing 3 starts playback again. T o move back the playback position by 10 seconds (for D VD VIDEO only) Press 3 during D VD VIDEO playback.
16 Basic DVD Player Operations 4 A djust the Volume For details, see “ Basic Operations ” on page 11. 5 Activate Realistic Sound Field Y ou can activ ate Surround mode for creating realistic sound fields.
17 T uning into Stations Manually On the front panel: 1 Press FM/AM to select the band . The last recei ved station of the selected band is tuned in. The CONTR OL buttons no w work for tuner operations. • Each time you press the button, the band alternates betw een FM and AM.
18 Selecting the FM Reception Mode When an FM stereo broadcast is hard to receiv e or noisy , you can change the FM reception mode while receiving an FM broadcast. • Y ou can store the FM reception mode for each preset station. Bef ore y ou start, remember .
19 T uner Operations What information can RDS signals pr ovide? Y ou can see the RDS signals the station sends on the display . Press DISPLA Y while listening to an FM station to show the RDS signals.
20 n er Operations PTY codes T o continue searching after the first stop Press PTY SEARCH again while the indications on the display are flashing. If no program is found, “ NO T FOUND ” appears on the display .
21 T uner Operations CASE 2 If the FM station you ar e listening to is broadcasting the program y ou have selected The unit continues to recei ve the station b ut the indicator of recei ved PTY code starts flashing.
22 n er Operations Description of the PTY codes: News : News. Affairs : T opical program expanding or enlar ging upon the news — debate, or analysis. Info : Programs the purpose of which is to impart advice in the widest sense. Sport : Programs concerned with any aspect of sports.
23 Some of the following settings are required after connecting and positioning y our speakers, while others will make operations e asier . Y ou can set the items by using the SETTING button and CONTR OL 5 / ∞ / 2 / 3 b uttons on the front panel.
24 7 Speaker information—“SUBWFR (subwoofer),” “FRNT SP (fr ont speaker),” “CNTR SP (center speaker),” and “REAR SP (rear speaker)” T o obtain the best possible effect from the Surround modes (see pages 29 to 32), register the follo wing information after all connections are completed.
25 Basic Settings 7 Crossover fr equency —“ CROSS (cr ossover) ” Small speakers cannot reproduce the bass sounds ef ficiently . If you use a small speaker in an y position, this unit automatically reallocates the bass sound elements assigned to the small speaker to the lar ge speakers.
26 7 Auto surr ound —“ AUTO SR ” Surround mode is automatically acti vated when the digital multichannel source such as Dolby Digital or DTS Digital Surround software or 2-channel matrix source such as Dolby Surround is played back.
27 The follo wing settings are required after connecting and positioning your speakers. Y ou can adjust the items by using the ADJUST button and CONTR OL 5 / ∞ / 2 / 3 b uttons on the front panel.
28 7 Front speaker output balance —“ BAL (balance) ” If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance. Adjust the output balance appr opriately from the listening point within the range of R (Right) – 21 to CENTER (0) or CENTER (0) to L (Left) – 21.
29 ** Manuf actured under license from Digital Theater Systems, Inc. US P A T . No. 5,451,942 and other world-wide patents issued and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. Copyright 1996 Digital Theater Systems, Inc.
30 The follo wing D AP modes are provided for this unit: LIVE CLUB : Gi ves the feeling of a liv e music club with a lo w ceiling. D ANCE CLUB : Giv es a throbbing bass beat. HALL : Gi ves clear vocal and the feeling of a concert hall. P A VILION : Gi ves the spacious feeling of a pavilion with a high ceiling.
31 Cr eating Realistic Sound Fields Activating Surr ound Mode When Auto Surround is set to “ OFF ” or 2-channel source other than Dolby Surround software is played back, acti vate Surround mode manually . Make sur e that you ha ve set the speakers inf ormation corr ectly (see page 24 or 55).
32 Cr eating Realistic Sound Fields Relation between Surround modes and adjustable items 23 1 56 4 89 7 VFP 10/0 +10 100+ TV RETURN EFFECT TV/STB CH ANALOG /DIGITAL TEST AUDIO INPUT SUBTITLE SURR ON/O.
33 DVD Player Operations Disc Information 7 Playable Disc T ypes This unit has been designed to play back the follo wing discs: D VD VIDEO, V ideo CD (VCD), Super V ideo CD (SVCD), audio CD, CD-R, and CD-R W . • This unit can also play back MP3 and JPEG files recorded on CD-R and CD-R W .
34 7 Disc structur e D VD VIDEO consists of “ titles , ” and each title may be di vided into some “ chapters ” (see Example 1). For e xample, if D VD VIDEO contains some movies, each movie may hav e its o wn title number and it may be further divided into some chapters .
35 This section explains adv anced operations of the built-in D VD player using the remote control. For MP3 playback, see pages 47 a nd 48, and for JPEG playback, see pages 49 and 50. Bef ore using the r emote control, press D VD to change the remote control oper a tion mode.
36 Basic Operation through the On-scr een Bar Ex. : When selecting the repeat mode f or DVD VIDEO & During playback or while stopped 1 Press ON SCREEN twice . The on-screen bar with pull-do wn menu appears on the TV . 2 Press cursor 3 (or 2 ) repeatedly to mo ve to OFF on the pull-down menu.
37 Locating a Desired Scene fr om the Disc Menu Using the disc menu, you can start playing a title, chapter , or track you specify . If the on-screen bar is sho wn on the TV , press ON SCREEN repeatedly to tur n off the on-screen bar . 7 From the DVD menu D VD VIDEO g enerally hav e their own menus which sho w the disc contents.
38 Selecting a V iew Angle—ANGLE While playing back D VD VIDEO containing multi-view angles, you can enjoy the same scene in dif ferent angles. The icon appears at the be g inning of playback when the current scene has multi-vie w angles. 7 Selecting a view angle & During playback 1 Press ANGLE.
39 DVD Player Operations Changing the Languages — SUBTITLE and AUDIO While playing back D VD VIDEO or SVCD containing subtitles in dif ferent languages, you can select the subtitle language to be displayed on the TV . The icon appears at the be g inning of playback when the current scene has plural subtitles.
40 3 Press cursor ∞ (or 5 ) repeatedly to select the desir ed audio langua ge. • Each time you press the button, the audio langua ge changes. 4 Press ENTER. The pop-up windo w goes off. T o turn off the on-screen bar Press ON SCREEN. Notes: • Some audio languages are abbre viated in the pop-up window .
41 Playing from a Specified Position on a Disc Y ou can start playing a title, chapter , or track you specify . Y ou can also play a disc from the specified time. 7 Locating a desired chapter — Chapter Sear ch When playing back D VD VIDEO, you can sear ch for the chapter number to be played.
42 2 Press cursor 5 / ∞ / 3 / 2 to mov e to the desired scene. • If there are more than 9 scenes, the digest screen will hav e more than one page. T o show other pages of the digest scr een T o display the previous page, select the left top scene, then press cursor 2 .
43 DVD Player Operations Special Picture Playback This unit provides special picture playbac k functions including frame-by-frame, strobe, slo w-motion, and zoom. 7 Frame-by-frame playback • Bef ore using the r emote control, press D VD to change the remote contr ol operation mode.
44 T o move the zoomed-in position Press cursor 5 / ∞ / 3 / 2 . T o return to normal playback Press ENTER. Note: • While being zoomed in, the picture ma y look coarse. 7 Changing the VFP setting — VFP The VFP (V ideo Fine Processor) function ena bles you to adjust the picture based on the picture tone, or personal preference.
45 Program Playback and Random Playback Y ou can play tracks on VCD, SVCD or CD in the desired order or in the random order . • Y ou cannot use Resume play for the program or random playback. 7 Playing back in the desired or der Y ou can play up to 99 tracks in the desired order .
46 Repeat Playback Y ou can repeat playback of the current title or chapter (for D VD VIDEO) or track (for VCD/SVCD/CD). Y ou can also repeat playback of a desired portion.
47 MP3 Disc Playback This unit can play back MP3 files on a CD-R or CD-R W . W e call such a disc “MP3 disc” in this instruction. • Befor e using the remote control, press D VD to change the remote control operation mode for the MP3 disc operations.
48 Operations through the MP3 CONTROL Screen Y ou can search for and play the desired groups and tracks through the MP3 CONTR OL screen shown on TV . 7 MP3 CONTROL screen 7 Operations • Bef ore using the r emote control, press D VD to change the remote contr ol operation mode.
49 Slide-show Playback Y ou can play back the still pictures one after another automatically — slide-show pla yback. Y ou can also use the buttons on the front panel if the y have the similar names as those on the remote control. • Befor e using the remote control, pr ess D VD to change the remote contr ol operation mode.
50 7 T o select a gr oup Press cursor 3 (or 2 ) repeatedly . 7 T o select a file Press cursor ∞ (or 5 ) repeatedly . 7 T o show the selected file Press ENTER. • When the still picture has been shown on the TV thoroughly , you can zoom in or out the still picture (see pages 43 and 44).
51 Button CHOICE 5 / ∞ 3 / 2 ENTER To do Display the choice menu on the TV. Each time you press the button, the choice menu is turned on and off alternately. Select an item. Adjust the selected item on the choice menu. Move to the submenu of the selected item or decide the setting.
52 4 Press cursor ∞ (or 5 ) r epeatedly to select the desired option. 5 Press ENTER to f inish the setting. T o set other items on the same choice menu Repeat steps 2 to 5 . T o move to another choice menu Press cursor 3 (or 2 ) repeatedly to select a choice menu you want to set up.
53 Choice Menu Operations 7 LANGUAGE menu Y ou can select “ MENU LANGU AGE, ” “ A UDIO LANGU A GE, ” and “ SUBTITLE ” only before playback. ¶ MENU LANGUAGE Some discs ha ve multiple languages. Select one of the languages or language codes from AA to ZU (see “ Language code list ” on page 54) as the menu language.
54 KM Cambodian KN Kannada KO Korean (KOR) KS Kashmiri KU Kurdish KY Kirghiz LA Latin LN Lingala LO Laothian L T Lithuanian L V Latvian, Lettish MG Malagasy MI Maori MK Macedonian ML Malayalam MN Mong.
55 Choice Menu Operations 7 SPK. SETTING menu ¶ SIZE Select this to enter the SIZE submenu. FR ONT SPEAKER, CENTER SPEAKER, and REAR SPEAKER Select one of the f ollowing settings f or each speaker: LARGE (LRG) : Select this when the speaker size is relativ ely large.
56 Setting DVD preferences ¶ CROSS OVER When you use a small speaker in an y position, this unit automatically reallocates the bass sound elements assigned to the small speaker to the lar ge speakers. T o use this function properly , set this crossover frequency le vel according to the size of the smallest speaker connected.
57 Choice Menu Operations Restricting Playback by Parental Lock Y ou can restrict playback of D VD VIDEO containing violent scenes and those not suitable for your family members.
58 7 Changing the setting of Parental Lock 1 Press CHOICE, then pr ess cursor 3 (or 2 ) to display the O THERS menu. 2 Press cursor ∞ (or 5 ) r epeatedly to move to “ P ARENT AL LOCK, ” then press ENTER. The P ARENT AL LOCK submenu appears on the TV .
59 Setting DVD preferences Choice Menu Operations Country/Area codes list for P arental Lock AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia .
60 Glossar y for DVD Player Aspect ratio The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of con ventional TVs is 4:3 and that of wide-screen TVs is 16:9. Chapter The smallest di vision on DVD VIDEO . It is a di vision of a title and similar to a track for CD or VCD.
61 Operating JVC’ s Audio/V ideo Components You can operate JVC’s audio and video components with this unit’s remote control, since control signals for JVC’s components are preset in the remote control.
62 Operating Video Components T o operate JVC ’ s video components using this r emote control • Some JVC ’ s VCRs can accept two types of the control signals — remote codes “ A ” and “ B. ” Before using this remote control, make sure that the remote control code of the connected VCR is set to code “ A.
63 Operating Other Manufactur ers ’ Equipment This remote control supplied with the unit can transmit control signals for other manufacturers ’ TVs, STBs, and VCRs. By changing the transmittable signals from preset ones to other manufacturers ’ , you can operate other manufacturers ’ components using this remote control.
64 Operating Other Manufactur ers ’ Equipment Manufactures ’ codes for STB Manufacturer Codes JVC 56 * , 57, 67 Amstrad 43 – 49 Blaupunkt 30 Echostar 50, 51, 67 General Insrument 29 Goldstar 31 .
65 Operating Other Manufactur ers ’ Equipment 7 T o change the transmittable signals for operating other manufacturers ’ VCR 1. Press and hold ST ANDBY/ON VCR. 2. Press VCR. 3. Enter the manufacturer ’ s code using the number b uttons (1 – 9, 0).
66 General Notes In general, you will have the best performance by keeping your discs and mechanism clean. • Store discs in their cases, and keep them in cabinets or on shelv es. Handling Discs • Remove the disc fr om its case b y holding it at the edge while pressing the center hole lightly .
67 T r oubleshooting Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your dealer. PROBLEM The power does not come on. No sound from speakers. Sound from one speaker only. “ OVERLOAD ” starts flashing on the display.
68 POSSIBLE CA USE The SCAR T cable is not connected correctly . TV input selection is incorrect. The disc is not playable. The unit ’ s and disc ’ s Region Code numbers are incompatible. Parental Lock is in use. The disc is loaded with its label and data sides in verted.
69 7 For T uner T r oubleshooting PROBLEM Hard to listen to broadcast because of noise. Continuous hiss or buzzing during FM reception. Occasional cracking noise during FM reception. POSSIBLE CAUSE The AM loop antenna is too close to the unit. The supplied FM antenna is not properly extended and positioned.
70 Designs & specif ications are subject to change without notice. Specifications Amplifier Output Po w er At Stereo operation: Front channels: 80 W per c hannel, min. RMS, driv en into 8 Ω at 1 kHz, with no more than 0.9% total harmonic distortion.
VICTOR COMP ANY OF JAP AN , LIMITED 0602NHMMDWJEM J V C EN RX-DV3RSL[B]cover_f.pm5 02.6.6, 3:09 PM 2.
Een belangrijk punt na aankoop van elk apparaat JVC RX-DV3RSL (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC RX-DV3RSL heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC RX-DV3RSL vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC RX-DV3RSL leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC RX-DV3RSL krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC RX-DV3RSL bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC RX-DV3RSL kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC RX-DV3RSL . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
