Gebruiksaanwijzing /service van het product 82-003536-01 van de fabrikant Analog Devices
Ga naar pagina of 114
a Getting Started With SHARC ® Processors Revision 3.0, A pril 2010 Part Number 82-003536-01 Analog Devices, Inc. One T echnology W ay N orwood, Mass.
Copyright Information ©2010 Analog Devices, Inc., ALL RIGH TS RESERVED. This document may not be reproduced in any form wi thout prior, express written consent from Analog Devices, Inc. Printed in the USA. Disclaimer Analog Devices, Inc. reserves the right to change this product without prior notice.
Getting Started With SHARC Processors iii CONTENTS PRE F A C E P urpose of This Manual .................................................................. ix Intended A udience .......................................................................... ix Manual Contents .
Contents iv Getting Started With SHARC Processors P rocessor P eripherals and P er formance .......................................... 1-8 P er formance ............................................................................ 1-8 THE E VALUATION P ROCESS E valuation T ools .
Getting Started With SHARC Processors v Contents EZ-Boards ........................................................................ 2-36 ADSP-21489 EZ-Board F rom Analog Devices ............... 2-37 ADSP-21479 EZ-Board F rom Analog Devices ...........
Contents vi Getting Started With SHARC Processors Platform-R elated I nformation ............................................. 3-3 Visual Learning and Development (VLD) ........................... 3-4 W orkshops and Seminars ..........................
Getting Started With SHARC Processors vii Contents VisualDSP++ Loader and U tilities Manual ..................... 3-11 VisualDSP++ E xample P rograms ................................... 3-12 Hardwar e T ools Documentation .............................
Contents viii Getting Started With SHARC Processors.
Getting Started With SHARC Processors ix PREFACE Thank you for your interest in the SHARC® family of processors from Analog Devices, Inc. Purpose of This Manual Getting Started With SHARC Processors .
Manual Contents x Getting Started With SHARC Processors Manual Contents This manual consists of: • Chapter 1, “Introduction to SHARC Processors” This chapter briefly describes the processor architecture, available models, and processor features.
Getting Started With SHARC Processors xi Preface • E-mail processor questions to: processor.support@analog.com (World wide support) processor.europe@analog.com (Europe support) processor.china@analog.com (China support) • Phone questions to 1-800-ANALOGD • Contact your Analog Devices, I nc.
Product Information xii Getting Started With SHARC Processors Product Information Product information can be obtained from the Analog Devices Web site, VisualDSP++ online Help system, and a technical library CD. Analog Devices Web Site The Analog Devices Web site, www.
Getting Started With SHARC Processors xiii Preface VisualDSP++ Online Documentation Online documentation comprises the VisualDSP++ Help system, software tools manuals, hardware tools manu als, processor manuals, Dinkum Abridged C++ library, and FLEXnet License Tools software documenta- tion.
Product Information xiv Getting Started With SHARC Processors Data sheets, which can be downloaded from the Analog Devices Web site, change rapidly, and therefore are no t included on the technical library CD. Technical manuals change periodica lly. Check the Web site for the latest manual revisions and associated documentation errata.
Getting Started With SHARC Processors 1-1 1 INTRODUCTION TO SHARC PROCESSORS This chapter briefly describes the SH ARC processor’s architecture and key features and compares available models.
What are SHARC Processors? 1-2 Getting Started With SHARC Processors enables the SHARC user to leverage le gacy code and design experience, while transitioning to higher-per formance, more highly-integrated SHARC products.
Getting Started With SHARC Processors 1-3 Introduction to SHARC Processors • Automotive audio applications. The ADSP-21362, ADSP-21365, ADSP-21369, ADSP-21371, ADSP-21462, ADSP-21465, ADSP-21469, AD.
What are SHARC Processors? 1-4 Getting Started With SHARC Processors Common Architectural Features SHARC processors share the follo wing architectural features. • 32/40-bit IEEE floating-point math • 32-bit fixed-point multipliers wi th 64-bit product and 80-bit accu- mulation • No arithmetic pipeline.
Getting Started With SHARC Processors 1-5 Introduction to SHARC Processors • An SDRAM controller that provides an interface to as many as four separate banks of industry-standard SDRAM devices • U.
What are SHARC Processors? 1-6 Getting Started With SHARC Processors First generation SHARC products offer performance of up to 66 MHz/198 MFLOPS and form the cornerstone of the SHARC proces- sor family.
Getting Started With SHARC Processors 1-7 Introduction to SHARC Processors variety of applications. This capability is especially relevant in consumer, automotive, and profession al audio where the algor ithms related to stereo channel processing can effectively utilize the SIMD architecture.
Processor Peripherals and Performance 1-8 Getting Started With SHARC Processors Integration of peripherals continue wi th serial ports, SPI ports, S/PDIF Tx/Rx, and an 8-channel asynchronous sample rate converter block.
Getting Started With SHARC Processors 1-9 Introduction to SHARC Processors execution (including single cycle multiply accumulates [MACs]), SHARC processors are designed for maximum I/O and memory access bandwidth. This balance of core speed, memory integration, and I/O bandwidth achieves the sustained performance critical to real-time applications.
Processor Peripherals and Performance 1-10 Getting Started With SHARC Processors T able 1-2. ADSP-2136x/ADSP-2137x SHAR C Pr ocessor S pecifications ADSP- 21362 ADSP- 21363 ADSP- 21364 ADSP- 21365 ADS.
Getting Started With SHARC Processors 1-11 Introduction to SHARC Processors T able 1-3. ADSP-2146x SHAR C P rocessor Specifications ADSP-21462 ADSP-21 465 ADSP-21467 ADSP-21469 F requency (MHz) 400 40.
Processor Peripherals and Performance 1-12 Getting Started With SHARC Processors DDR2 Interface Y es Y es Y es Y es VISA Y es Y es Y es Y es T able 1-3.
Getting Started With SHARC Processors 1-13 Introduction to SHARC Processors T able 1-4. ADSP-2147x SHAR C P rocessor Specifications ADSP-21478 ADSP- 21479 F requency (MHz) 266 266 On-Chip RAM 3M bit 5.
Processor Peripherals and Performance 1-14 Getting Started With SHARC Processors AMI Interface 16 bit Y es Y es SDRAM Bus Width 16 bit 16 bit IDP/PDAP Y es Y es T able 1-4.
Getting Started With SHARC Processors 1-15 Introduction to SHARC Processors T able 1-5. ADSP-2148x SHAR C P rocessor Specifications ADSP-21483 ADS P-21486 ADSP-21487 ADSP-21488 A DSP-21489 Fre q ue nc.
Processor Peripherals and Performance 1-16 Getting Started With SHARC Processors.
Getting Started With SHARC Processors 2-1 2 THE EVALUATION PROCESS This chapter describes the available software and ha rdware tools needed to evaluate SHARC processors an d develop application programs.
Evaluation Tools 2-2 Getting Started With SHARC Processors “Selecting Software Development Tools ” provides a summary of the avail- able software development tools for SHARC processors.
Getting Started With SHARC Processors 2-3 The Evaluation Process F igure 2-1. T ool Selection W orkflow Decide to evaluate SHARC Build custom hardware V alidate design concept Purchase EZ-KIT Lite lic.
Evaluation Tools 2-4 Getting Started With SHARC Processors Platform and Processor Support VisualDSP++ supports SHARC proces sors from Analog Devices. Win- dows® System 7 (as of VisualD SP++ 5.0 Update 7), Windows® Vista, Windows® XP, and Windows® 2000 hosts are supported.
Getting Started With SHARC Processors 2-5 The Evaluation Process ease of use with the ability to import C header files, allo wing fo r symbolic references into arbitrarily complex C da ta structures.
Evaluation Tools 2-6 Getting Started With SHARC Processors Configuration of these elements is do ne graphically, with code wizards to speed the creation of new threads and interrupt handlers. VDK has been available for multiple releases of VisualDSP++ and is now a key compo- nent of products shipping from a number of high-volume vendors.
Getting Started With SHARC Processors 2-7 The Evaluation Process required. VisualDSP++ provides core cycle-accurate simulators, allowing inspection of every nuance of activity within the processor, including visu- alization of the processor ’s pipeline and cache.
Evaluation Tools 2-8 Getting Started With SHARC Processors the majority of its time is quickly assembled. This tool can be used to eas- ily inspect an application for unexpect ed hotspots (for example, suggesting the need to move a key routine from external to internal memory).
Getting Started With SHARC Processors 2-9 The Evaluation Process every feature of the graphical environm ent is available to script authors. Applications can be rebu ilt, downloaded, and run from a simple script executed from the command line or from within a custom test harness framework.
Evaluation Tools 2-10 Getting Started With SHARC Processors Take a VisualDSP++ Test Drive! Take a free 90-day Test Drive of Visu alDSP++. To take a Test Drive, you can download a Test Drive or request a CD from the Analog Devices DSP Tools Web site at: http://www.
Getting Started With SHARC Processors 2-11 The Evaluation Process Embedded Processors and DSPs Analog Devices is a leading supplier of embedded and digital signal pro- cessing solutions, and its low cost SHARC processors and integrated mixed-signal processors are ideal for an ever-increasing spectrum of appli- cations.
Evaluation Tools 2-12 Getting Started With SHARC Processors Software Modules Analog Devices has a wide range of tested and optimized software modules available, including decoders, encode rs, codecs and other algorithms that provide multimedia functions for the SHARC family.
Getting Started With SHARC Processors 2-13 The Evaluation Process set breakpoints, single-step through code, view memory, fill/dump mem- ory, perform real-time data manipulation, profile execution and memory access, plot data, and use standard I/O.
Evaluation Tools 2-14 Getting Started With SHARC Processors ADSP-21489 EZ-KIT Lite From Analog Devices Part Number: ADZS-21489-EZLITE F igure 2-2. ADSP-21489 EZ-KIT Lite E valuation S ystem.
Getting Started With SHARC Processors 2-15 The Evaluation Process The ADSP-21489 EZ-KIT Lite evaluation system, as shown in Figure 2-2 , provides developers with a cost-effective method for initial evaluation of the ADSP-21483/21486/21487/21489 SHARC processors via a USB-based, PC-hosted tool set.
Evaluation Tools 2-16 Getting Started With SHARC Processors ADSP-21479 EZ-KIT Lite From Analog Devices Part Number: ADZS-21479-EZLITE The ADSP-21479 EZ-KIT Lite evaluation system, as shown in Figure 2-3 , provides developers with a cost-effective method for initial evaluation of the ADSP-21478/21479 SHARC processors via a F igure 2-3.
Getting Started With SHARC Processors 2-17 The Evaluation Process USB-based, PC-hosted tool set. With this EZ-KIT Lite, users can learn more about Analog Devices ADSP-21479 hardware and software develop- ment, and quickly prototype a wide range of applications.
Evaluation Tools 2-18 Getting Started With SHARC Processors ADSP-21469 EZ-KIT Lite From Analog Devices Part Number: ADZS-21469-EZLITE F igure 2-4. ADSP-21469 EZ-KIT Lite E valuation S ystem.
Getting Started With SHARC Processors 2-19 The Evaluation Process The ADSP-21469 EZ-KIT Lite evaluation system, as shown in Figure 2-4 , provides a cost-effective method for initial evaluation of the ADSP-21462/21465/21467/21469 SHARC proc essors via a USB-based PC-hosted tool set.
Evaluation Tools 2-20 Getting Started With SHARC Processors • Headphone jack (connected to one of the stereo outputs) • SPDIF In RCA jack • SPDIF Out RCA jack • ADM1032 two-wire sensor • ADM3202 RS-232 line driver/receiver • USB standalone debug agent • USB 2.
Getting Started With SHARC Processors 2-21 The Evaluation Process ADSP-21375 EZ-KIT Lite From Analog Devices Part Number: ADZS-21375-EZLITE The ADSP-21375 EZ-KIT Lite evaluation system, as shown in Figure 2-5 , provides developers with a cost-effective method for initial evaluation of the ADSP-21375 SHARC processors.
Evaluation Tools 2-22 Getting Started With SHARC Processors Lite, users can learn more abou t Analog Devices ADSP-21375 SHARC processor hardware and software deve lopment and prototype applications.
Getting Started With SHARC Processors 2-23 The Evaluation Process • 26-pin DAI header • 11 LEDs: 1 power (green), 1 bo ard reset (red), 1 USB monitor (amber), and 8 general-purpose (amber) • 5 p.
Evaluation Tools 2-24 Getting Started With SHARC Processors ADSP-21371 EZ-KIT Lite From Analog Devices Part Number: ADZS-21371-EZLITE The ADSP-21371 EZ-KIT Lite evaluation system, as shown in Figure 2-6 , provides developers with a cost-effective method for initial evaluation of the ADSP-21371 SHARC processors.
Getting Started With SHARC Processors 2-25 The Evaluation Process The EZ-KIT Lite includes an ADSP-21371 SHARC processor desktop evaluation board along with an evalua tion suite of the VisualDSP++ devel- opment and debugging environment , including the C/C++ compiler, assembler, and linker.
Evaluation Tools 2-26 Getting Started With SHARC Processors • National Instruments Educational Laboratory Virtual Instrumen- tation Suite (ELVIS) Interface • JTAG ICE 14-pin header • Evaluation .
Getting Started With SHARC Processors 2-27 The Evaluation Process ADSP-21369 EZ-KIT Lite From Analog Devices Part Number: ADZS-21369-EZLITE F igure 2-7.
Evaluation Tools 2-28 Getting Started With SHARC Processors The ADSP-21369 EZ-KIT Lite, as shown in as shown in Figure 2-7 , pro- vides a cost-effective method for initial evaluation of the ADSP-21367/21368/21369 SHARC processors via a USB-based PC-hosted tool set.
Getting Started With SHARC Processors 2-29 The Evaluation Process • SPDIF Out RCA jack • ADM3202 RS-232 driver/receiver • USB interface • JTAG ICE 14-pin header • Evaluation suite of VisualD.
Evaluation Tools 2-30 Getting Started With SHARC Processors ADSP-21364 EZ-KIT Lite From Analog Devices Part Number: ADZS-21364-EZLITE F igure 2-8. ADSP-21364 EZ-KIT Lite Board.
Getting Started With SHARC Processors 2-31 The Evaluation Process The ADSP-21364 EZ-KIT Lite evaluation system, as shown in Figure 2-8 , provides developers with a cost-effective method for initial evaluation of ADSP-21363/21364/21365/21366 SHARC processors.
Evaluation Tools 2-32 Getting Started With SHARC Processors • SPDIF Out RCA jack • USB interface • JTAG ICE 14-pin header • Evaluation suite of VisualDSP++ development tools • Flash programm.
Getting Started With SHARC Processors 2-33 The Evaluation Process ADSP-21262 EZ-KIT Lite From Analog Devices Part Number: ADZS-21262-EZLITE F igure 2-9.
Evaluation Tools 2-34 Getting Started With SHARC Processors The ADSP-21262 EZ-KIT Lite evaluation system, as shown in Figure 2-9 , provides developers with a cost-effective method for initial evaluation of the ADSP-21261/21262/21266 SHARC processors for a wide range of applications.
Getting Started With SHARC Processors 2-35 The Evaluation Process • 1 x 2 RCA jack for 1 channel of stereo audio input • Headphone jack (connected to one of the stereo outputs) • SPDIF receiver .
Evaluation Tools 2-36 Getting Started With SHARC Processors EZ-Boards SHARC EZ-Board evaluation boards prov ide developers with a low cos t platform for initial eval uation of SHARC processor s via an exte rnal JTAG emulator or standalone debug agent board.
Getting Started With SHARC Processors 2-37 The Evaluation Process ADSP-21489 EZ-Board From Analog Devices Part Number: ADZS-21489-EZBRD F igure 2-10. ADSP-21489 EZ-Board.
Evaluation Tools 2-38 Getting Started With SHARC Processors The ADSP-21489 EZ-Board evaluation board, as shown in Figure 2-10 , provides developers with a low cost pl atform for initial evaluation of the ADSP-2148x SHARC processors via an external JTAG emulator or stan- dalone debug agent board.
Getting Started With SHARC Processors 2-39 The Evaluation Process • Expansion interface: AMI, flags/IRQs, DAI, DPI, PWR_IN, 3.3 V, GND • Standalone debug agent interface • WDT (watch dog timer) .
Evaluation Tools 2-40 Getting Started With SHARC Processors ADSP-21479 EZ-Board From Analog Devices Part Number: ADZS-21479-EZBRD F igure 2-11. ADSP-21479 EZ-Board.
Getting Started With SHARC Processors 2-41 The Evaluation Process The ADSP-21479 EZ-Board evaluation board, as shown in Figure 2-11 , provides developers with a low cost pl atform for initial evaluation of the ADSP-2147x SHARC processors via an external JTAG emulator or stan- dalone debug agent board.
Evaluation Tools 2-42 Getting Started With SHARC Processors • Expansion interface: AMI, flags/IRQs, DAI, DPI, PWR_IN, 3.3 V, GND • Standalone debug agent interface • RTC (real time clock) implem.
Getting Started With SHARC Processors 2-43 The Evaluation Process ADSP-21469 EZ-Board From Analog Devices Part Number: ADZS-21469-EZBRD F igure 2-12. ADSP-21469 EZ-Board.
Evaluation Tools 2-44 Getting Started With SHARC Processors The ADSP-21469 EZ-Board evaluation board, as shown in Figure 2-12 , provides developers with a low cost pl atform for initial evaluation of the ADSP-2146x SHARC processors via an external JTAG emulator or stan- dalone debug agent board.
Getting Started With SHARC Processors 2-45 The Evaluation Process • Expansion interface: EBIU, fl ags/IRQs, DAI, DPI, PWR_IN (5 V), 3.3 V, GND • Standalone debug agent interface • USB cable • .
Evaluation Tools 2-46 Getting Started With SHARC Processors Debug Agent Part Number: ADZS-DBGAGENT-BRD The standalone debug agent is intend ed to provide a modular low cost emulation solution for EZ-Boards as well as evaluation boards designed by third parties.
Getting Started With SHARC Processors 2-47 The Evaluation Process EZ-Extender Daughter Boards EZ-Extender daughter boards enhance and extend EZ-Board and EZ-KIT Lite features and functionalities. Thi s section describes the EZ-Extender daughter boards that are currently available.
Evaluation Tools 2-48 Getting Started With SHARC Processors The SHARC USB EZ-Extender dau ghter board, as s hown in Figure 2-14 , provides a solution for users to eval uate different peripherals on SHARC processors.
Getting Started With SHARC Processors 2-49 The Evaluation Process SHARC EZ-Extender Part Number: ADZS-21262-1-EZEXT The SHARC EZ-Extender daughter board, as shown in Figure 2-15 , is a separately sold assembly that plugs into a SHARC EZ-KIT Lite ev aluation system’s expansion interface.
Evaluation Tools 2-50 Getting Started With SHARC Processors EZ-KIT Lite. The SHARC EZ-Extender al so provides developers a bread- board area and the ability to access all of the pins on the ADSP-21262 and ADSP-21364 EZ-KIT Lite’s expansion interface.
Getting Started With SHARC Processors 2-51 The Evaluation Process SHARC Audio EZ-Extender Part Number: ADZS-SHAUDIO-EZEXT The SHARC audio EZ-Extender daughter board, as shown in Figure 2-16 , provides a solution for users to e valuate audio applications on the ADSP-214xx EZ-Board/EZ-KIT L ite.
Evaluation Tools 2-52 Getting Started With SHARC Processors The EZ-Extender consists of thr ee Analog Devices AD1939 audio codecs and provides 24 channels of analog audio out, 12 channels of analog audio in. The primary codec operates in both in I 2 S and TDM mode and can run at sample rates of 48, 96, or 192 kHz.
Getting Started With SHARC Processors 2-53 The Evaluation Process USB EZ-Extender for Blackfin and SHARC Part Number: ADZS-BFSHUSB-EZEXT The Blackfin/SHARC USB EZ-Extender daughter board, as shown in Figure 2-17 , plugs onto the expansion interface of the ADSP-BF518F, ADSP-BF526, and ADSP-21469 EZ-Board and EZ-KIT Lite.
Evaluation Tools 2-54 Getting Started With SHARC Processors The Blackfin/SHARC USB EZ-Exte nder daughter board feat ures: • USB 2.0 interface – PLX Technology NET2272 device • USB driver and application code • CE certified JTAG Emulators JTAG (Joint Test Action Group) is defined by the IEEE 1149.
Getting Started With SHARC Processors 2-55 The Evaluation Process High Performance USB 2.0 JTAG Emulator Part Number: ADZS-HPUSB-ICE The Analog Devices high-speed, hi gh performance, universal serial .
Evaluation Tools 2-56 Getting Started With SHARC Processors These easy-to-use USB-based emulator s perform a wide range of emula- tion functions, including single-ste p and full-speed execution with predefined breakpoints, and viewin g and/or altering of register and memory contents.
Getting Started With SHARC Processors 2-57 The Evaluation Process • 5 V tolerant and 3.3 V compliant for 5 V processors • Multiprocessor support • 14-pin JTAG connector • 3-meter USB cable for.
Evaluation Tools 2-58 Getting Started With SHARC Processors USB 1.1 JTAG Emulator Part Number: ADZS-USB-ICE The cost-effective universal serial bus (USB)-based emulator, as shown in Figure 2-19 , from Analog Devices provides a portable, non-intrusive, tar- get-based debugging solution for Analog Devices JTAG processors.
Getting Started With SHARC Processors 2-59 The Evaluation Process This USB-based emulator performs a wide range of emulation functions, including single-step and full-spee d execution with predefined break- points, and viewing and/or altering of register and memory contents.
Evaluation Tools 2-60 Getting Started With SHARC Processors • 14-pin JTAG connector • 3-meter USB cable for difficult to reach targets Selecting the Right Combination of Tools Knowing which tools to use is critica l to ensuring a quick development cycle.
Getting Started With SHARC Processors 2-61 The Evaluation Process After you have finished constructing your hardware, purchase a low cost USB emulator (p/n: ADZS-US B-ICE) from Analog Devices.
Evaluation Tools 2-62 Getting Started With SHARC Processors.
Getting Started With SHARC Processors 3-1 3 SUPPORT OPTIONS This chapter addresses the support opti ons available for users both during the evaluation process and development phases of SHARC processor pro- cessor design. Available Support Analog Devices provides a wide variety of processor support options.
Available Support 3-2 Getting Started With SHARC Processors • Communities-related information • Platform-related information Visit the SHARC processor home page at: http://www.analog.com/sh arc . The Analog Devices Embedded Processing and DSP page, which offers access to other processor families, is located at: http://www.
Getting Started With SHARC Processors 3-3 Support Options Applications Notes, EE-Notes, and Other Articles The most useful documents available to users are the Application or EE- (Engineer-to-Engineer) Notes, since th ey offer detailed technical informa- tion about using the SHARC processor.
Available Support 3-4 Getting Started With SHARC Processors Visual Learning and Development (VLD) The Analog Devices Web site offers free on-demand video tutorials. Sub- jects include: • SHARC Processors Overview • SHARC ADSP-2146x Processor Overview • SHARC ADSP-21469 EZ-KIT Overview Please go to http://www.
Getting Started With SHARC Processors 3-5 Support Options Advanced instructions are presented with a follow on lab session about code optimization. The I/O peripherals, which include the SPORTS, link ports, and external port, are discusse d in detail along with DMA operation between these peripherals and internal memory.
Available Support 3-6 Getting Started With SHARC Processors Hardware Reference Manuals Each processor’s hardware reference ma nual provides ar chitectural infor- mation about that particular SHARC processor. The descriptions cover functional blocks, buses, and ports, i ncluding all features and processes that they support.
Getting Started With SHARC Processors 3-7 Support Options Data Sheets Data sheets are created for each SHARC processor and for each revision of a single product.
Available Support 3-8 Getting Started With SHARC Processors BSDL Files Boundary scan description language (BSDL) files are ne cessary for the application of boundary scan for board and system-level testing and in-system programming. BSDL files ar e the electronic data sheets that describe the IEEE 1149.
Getting Started With SHARC Processors 3-9 Support Options To access the VisualDSP++ Tools Anomalies search page, point your browser at: http://www.analog.com/processors/to ols/anomalies VisualDSP++ Documentation This section briefly describes the VisualDSP++ manual set.
Available Support 3-10 Getting Started With SHARC Processors VisualDSP++ User’s Guide This manual describes the features, components, and functions of the VisualDSP++ integrated development and debugging environment (IDDE). It covers license management, project management, code devel- opment, debugging tools, VDK, and much more.
Getting Started With SHARC Processors 3-11 Support Options VisualDSP++ Linker and Utilities Manual This manual provides information on the linking process and describes the syntax for the linker’s command language—a scripting language that the linker reads from the linker description file ( .
Available Support 3-12 Getting Started With SHARC Processors The manual begins by examining where loading/splitting fi ts in the typical program development activities. It di scusses boot modes, boot streams, and second stage kernels. This manual contains the details you need to know about booting each particular subfamily of SHARC processors.
Getting Started With SHARC Processors 3-13 Support Options Hardware Tools Documentation Each hardware tool available from Analog Devices includes documenta- tion in electronic format. Typically this documentation includes a short description of switch and jumper settin gs, a bill of materials, and schemat- ics.
Available Support 3-14 Getting Started With SHARC Processors This manual provides information on the EZ-KIT Lite from a program- mer’s perspective and provides a memory map of the board. SHARC EZ-Board Evaluation System Manual This manual provides inst ructions for using the ha rdware and installing the software on your PC.
Getting Started With SHARC Processors 3-15 Support Options Best of all, Visu alDSP++ He lp provides a single access point to just about every processor hardware and tool s document produced by Analog Devices. The search engine in Help enables you to find information quickly.
Available Support 3-16 Getting Started With SHARC Processors Use EngineerZone to connect with ot her DSP developers who face similar design challenges. You can also use this open forum to share knowledge and collaborate with the ADI support team and your peers.
Getting Started With SHARC Processors I-1 II N D E X A ADSP-21262 EZ-KIT Lite evaluation board, 2-33 ADSP-2126x SHARC processor specif ications , 1-9 ADSP-21364 EZ-KIT Lite evaluation board, 2-30 ADSP.
Index I-2 Getting Started With SHARC Processors D data sheets, 3-7 Debug Agent Board, 2- 46 debugging targets, JTAG connection to EZ-KIT Lite board, 2-6 decoders, 2-12 desktop evaluation boards, list .
Getting Started With SHARC Processors I-3 Index Help system described, 3-14 for VisualDSP++, 2-9 High-performance USB 2.0 JTAG emulator (HPUSB), 2-55 HP-USB (high-performance USB JTAG emulator), 2-55 .
Index I-4 Getting Started With SHARC Processors R real-time operating system. See RTOS RTOS (real-time operating system), 2-5 S SCC (source code control), 2-8 seminars about, 3-4 SHARC processor, 3-4 .
Getting Started With SHARC Processors I-5 Index W Web site, Analog Devices, 3-1 Windows operating systems, supporting VisualDSP, 2-4 workshops, 3-4.
Index I-6 Getting Started With SHARC Processors.
Een belangrijk punt na aankoop van elk apparaat Analog Devices 82-003536-01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Analog Devices 82-003536-01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Analog Devices 82-003536-01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Analog Devices 82-003536-01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Analog Devices 82-003536-01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Analog Devices 82-003536-01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Analog Devices 82-003536-01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Analog Devices 82-003536-01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.