Gebruiksaanwijzing /service van het product UX-P5/UX-P3 van de fabrikant JVC
Ga naar pagina of 30
GVT0053-003A [US, UN, UJ] For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference . Model No . Se r ia l N o. UX-P5 — Consists of CA-UXP5 and SP-UXP5.
Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely (the STANDBY/ON lamp goes off). The switch in any position does not disconnect the mains line. • When the unit is on standby , the ST ANDBY/ON lamp lights red.
CAUTION • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) • Do not place any naked flame sources, such as lighted candles, on the apparatus.
UX-P5/UX-P3 Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS / 1 CLASSIFICATION LABEL, PLACED ON REAR ENCLO- SURE 2 WARNING LABEL, PLACED INSIDE THE UNIT CLASS 1 LASER PRODUCT 1. CLASS 1 LASER PRODUCT 2. CAUTION : Invisible laser radiation when open and interlock failed or defeated.
– 1 – English Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons on the remote contr ol. Y ou can use the b uttons both on the remote contr ol and on the unit f or the same operations if they ha ve the same or similar names (or marks), unless mentioned otherwise.
– 2 – English Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .
– 3 – English COMPACT DIGITAL AUDIO CD T APE FM/AM MICRO COMPONENT SYSTEM CD-R/RW PLA YBACK TIMER CLOCK STANDBY / ON VOLUME FUNCTION SOUND DIRECT OPERA TING AHB PRO REC REV .
– 4 – English See pages in the parentheses for details. Front Panel 1 Remote sensor 2 F or UX-P5: ST ANDBY/ON lamp (10) F or UX-P3: ST ANDBY lamp (10) 3 (ST ANDBY/ON) button (10, 11, 16, 21) 4 T APE 2 3 button (10, 17, 18) Pr essing this button also turns on the unit.
– 5 – English UX-P5 UX-P5 1 REPEA T button (16) 2 DIMMER button (11) 3 DISPLA Y button (10) 4 PR OG (program) b utton (15) 5 RANDOM button (16) 6 SOUND MODE button (12) 7 A UTO PRESET button (13) 8 CD 0 (disc tray open/close) b utton (14) Pr essing this button also turns on the unit.
– 6 – English Getting Started Supplied Accessories Make sure that y ou have all the follo wing items. The number in the parentheses indicates the quantity of the pieces supplied.
– 7 – English RIGHT LEFT MAIN SPEAKERS SPEAKER IMPEDANCE MIN 6 RIGHT LEFT MAIN SPEAKERS SPEAKER IMPEDANCE MIN 4 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated. • If the AM loop antenna wire is cov ered with vinyl, remo ve the vinyl by twisting it as shown in the dia gram.
– 8 – English Speaker grille T o remove the speak er grille, inserting your fing ers at the top of the speaker grille, pull to wards y ou. Then pull the bottom to wards you. T o attach the speaker grille, put the projections of the speaker grille into the holes of the speak er .
– 9 – English Use a screwdri v er to rotate the voltage selector so the v oltage number the v oltage mark is pointing at is the same as the voltage where you are plugging in the unit. (See the back cov er page.) • DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.
– 10 – English Common Operations T urning On the Power When you press the play b utton — CD 3 / 8 , T APE 2 3 , or the source selecting button — FM/AM, and MD/A UX (UX- P5) or A UX (UX-P3), the unit automatically turns on and starts playback if the source is ready .
– 11 – English Setting the AM T uner Inter val Spacing When shipped, the AM tuner interval is set to 9 kHz or 10 kHz spacing. Y ou can change it to 10 kHz or 9 kHz spacing.
– 12 – English Reinforcing the Bass Sound Y ou can reinforce the bass sound to maintain ric h (“ AHB 1” and “ AHB 2”), full bass at low v olume.
– 13 – English Listening to FM and AM Broadcasts T uning in a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in the previously tuned sta tion (either FM or AM). • Each time you press the button, the band alternates between FM and AM.
– 14 – English Playing Back CDs (CD/CD-R/CD-RW) This unit has been designed to playback the follo wing CDs: •C D • CD-R • CD-R W Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit. General Notes In general, you will hav e the best performance by keeping your CDs and the mechanism clean.
– 15 – English MULTI KEY T rack number Program step number PRGM PRGM SET Programming the Playing Order of the T racks — Program Play Y ou can arrange the order in which tracks play before you start playing. Y ou can pro gram up to 20 tracks. On the r emote control ONL Y : 1 Load a CD .
– 16 – English Prohibiting Disc Ejection — T ray Lock Y ou can lock the disc tr ay and prohibit to eject the CD. • This is possible only while the unit is turned on. On the unit ONL Y : T o prohibit disc ejection, press (ST ANDBY/ON) while holding 7 .
– 17 – English Playing Back T apes Y ou can play back type I, type II, and type IV tapes without changing any settings. Playing Back a T ape 1 Pr ess 0 for cassette deck. 2 Put a cassette in with the exposed part of the tape down. 3 Close the cassette holder gently .
– 18 – English Recording Recording on a T ape On the unit ONL Y : 1 Put a recordable cassette in with the e xposed part of the tape down. 2 Close the cassette holder gently . • If you want to record on both sides of a tape, see “T o record on both sides — Re verse Mode.
– 19 – English CD Direct Recording Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you ha ve made for Program play . On the unit ONL Y : 1 Put a r ecordable cassette in with the exposed part of the tape down.
– 20 – English Using the T imers There are three timers a vailable — Daily T imer, Recor ding T imer , and Sleep Timer . Before using the timers, you need to set the clock built in the unit (see page 10.) When you press TIMER on the unit for more than 3 seconds, the display alternates between “ ADJUST” and “CLOCK” for about 5 seconds.
– 21 – English 6 Pr ess TIMER to complete the timer setting . 7 Pr ess (ST ANDBY/ON) to turn off the unit (on standby) if y ou ha ve set the timer with the unit turned on. • When the timer turns on the unit, the timer ( ) indicator and the selected timer mode indicator ( D AIL Y or REC) start flashing.
– 22 – English Maintenance T o get the best perfor mance of the unit, keep your discs, tapes, and mechanism c lean. Handling discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly . • Do not touch the shiny surface of the disc, or bend the disc.
– 23 – English If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been ph ysically damaged, call a qualified person, such as your dealer , for service.
– 24 – English Specifications UX-P5 (CA-UXP5 and SP-UXP5) Amplifier Output Po wer: 120 W (60 W + 60 W) at 6 Ω (MAX.) 100 W (50 W + 50 W) at 6 Ω (10 % THD) Audio input sensitivity/Impedance (a t 1 kHz) A UX: 400 mV/48 k Ω Audio output lev el A UX: 260 mV/5.
VICT OR COMP ANY OF JAP AN, LIMITED EN, CH 0301MWMMDWJEM VOLT AGE SELECTOR VOL T AGE SELECTOR 110V 127V 220V 230V -240V VOL T AGE SELECTOR 110V 127V 230V 220V UX-P5 UX-P3 Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and U.
Een belangrijk punt na aankoop van elk apparaat JVC UX-P5/UX-P3 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC UX-P5/UX-P3 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC UX-P5/UX-P3 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC UX-P5/UX-P3 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC UX-P5/UX-P3 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC UX-P5/UX-P3 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC UX-P5/UX-P3 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC UX-P5/UX-P3 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
