




Important Safety Notice Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service procedures recommended by AOC and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose. The special tools should be used when and as recommended.
It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected. Hereafter throughout this manual, AOC Company will be referred to as AOC. WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics may create shock, fire, or other hazards. Under no circumstances should the original design be modified or altered without written permission from AOC. AOC assumes no liability, express or implied, arising out of any unauthorized modification of design. Servicer assumes all liability. FOR PRODUCTS CONTAINING LASER: DANGER-Invisible laser radiation when open AVOID DIRECT EXPOSURE TO BEAM. CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION -The use of optical instruments with this product will increase eye hazard. TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF THIS SERVICE MANUAL. Take care during handling the LCD module with backlight unit -Must mount the module using mounting holes arranged in four corners. -Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen. -Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to the panel. -Protect the module from the ESD as it may damage the electronic circuit (C-MOS). -Make certain that treatment person’s body is grounded through wristband. -Do not leave the module in high temperature and in areas of high humidity for a long time. -Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may
damage the panel.)



control logic and DDC.
LED Drive.
DVI
AC-IN
100V~240V

Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor.
By changing these settings, the picture can be adjusted to your personal preferences.

Press the Power button to turn on/off the monitor.
Press to display the OSD or confirm the selection
Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD. (Eco mode hot key may
not be available in all models).
When there is no OSD, press > continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input signal
resolution is wide format, the hot key is disabled to adjust.)
Auto / Exit
When the OSD is closed, press Auto/Source/Exit button continuously about 2 second to do auto configure (only for the models
with dual or more inputs).
When the OSD is closed, press Auto/Source/Exit button will be Source hot key function (Only for the models with dual or more
inputs).

Basic and simple instruction on the control keys.

MENU-button to activate the OSD window.
MENU-button to activate sub-menu . Once the desired function is highlighted, press
it.
to change the settings of the selected function. Press
AUTO to exit. If you want to
adjust any other function, repeat steps 2-3.
MENU button while the monitor is off and then
power button to turn the monitor on. To un-lock the OSD - press and hold the
the monitor is off and then press
power button to turn the monitor on.
adjust.


(Menu) to display menu

to select submenu, and press to
enter.



to exit.



(Menu) to display menu
(Image Setup) , and press
to enter.

to select submenu, and press
to enter.

to adjust.


to exit.

(Menu) to display menu.
(Color Setup), and press
to enter.


to select submenu, and press
to enter.

to adjust. 5

to exit.


on or off Disable or Enable Full Enhance Mode
Nature Skin on or off Disable or Enable Nature Skin Mode
Green Field on or off Disable or Enable Green Field Mode
Sky-blue on or off Disable or Enable Sky-blue Mode
AutoDetect on or off Disable or Enable AutoDetect Mode
DCB Demo on or off Disable or Enable Demo

(Menu) to display menu.
(Picture Boost), and press
to enter.


to select submenu, and press
to enter.

to adjust. 5

to exit.
Frame Size 14-100 Adjust Frame Size
Brightness 0-100 Adjust Frame Brightness
Contras 0-100 Adjust Frame Contrast
H. position 0-100 Adjust Frame horizontal Position
V.position 0-100 Adjust Frame vertical Position
Bright Frame on or off Disable or Enable Bright Frame


(Menu) to display menu.
(OSD Setup), and press
to enter.

to select submenu, and press to enter.


to adjust. 5

to exit.
H.Position 0-100 Adjust the horizontal position of OSD
V.Position 0-100 Adjust the vertical position of OSD
Timeout 5-120 Adjust the OSD Timeout
Transparence 0-100 Adjust the transparence of OSD
Language Select the OSD language

(Menu) to display menu.

to enter. 3

to select submenu, and press
to enter.


to exit.



(Menu) to display menu.

to exit.
Exit Exit the main OSD




Pin Number 15-Pin Side of the Signal Cable Pin Number 15-Pin Side of the Signal Cable
1 Video-Red 9 +5V
2 Video-Green 10 Ground
3 Video-Blue 11 N.C.
4 N.C. 12 DDC- Serial data
5 Detect Cable 13 H- sync
6 GND-R 14 V- sync
7 GND-G 15 DDC- Serial clock




BM215WF4-T2BB is a Color Active Matrix Liquid Crystal Display with an integral Light Emitting Diode (LED)
backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type
display operating in the normally white mode. It has a 21.5 inch diagonally measured active display area with Full
HD resolution (1080 vertical by 1920 horizontal pixel array) Each pixel is divided into Red, Green and Blue
sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is
determined with a 8-bit gray scale signal for each dot, thus, presenting a palette of more than 16,7M colors with
Advanced-FRC(Frame Rate Control). It has been designed to apply the interface method that enables low power,
high speed, low EMI. FPD Link or compatible must be used as a LVDS(Low Voltage Differential Signaling) chip. It is
intended to support applications where thin thickness, wide viewing angle, low power are critical factors and graphic
displays are important. In combination with the vertical arrangement of the sub-pixels, the BM215WF4-T2BB
characteristics provide an excellent flat panel display for office automation products such as monitors.



Power Supply Input Voltage VLCD 4.5 5.0 5.5 Vdc
Permissive Power Input Ripple VLCD - - 0.3 V 3
Power Consumption PLCD - 5.00 6.5 Watt 1
Inrush current IRUSH - - 3.0 A 1, 4

LED String Current Is - 110 120 mA 2,7
LED String Voltage Vs 48.0 51.2 54.4 V 3,7
LED Life Time LED_LT 30,000 - - Hrs 5,7
Ta = 25°C

(Ta=25 °C, VLCD=5.0V, fV=60Hz, DCLK=72MHz, Is=110mA)

Surface Luminance, white LWH 160 200 - cd/m2
Rise Time TrR - 1.3 2.6 ms 4
(RD80S) Decay Time TrD - 3.7 7.4 ms
Degree x axis, left (=180°) l 45 50
Degree x axis, left (=180°) l 40 45

(CN406)
14.318MHZ (X401)
(Include ADC, OSD, MCU)
(U403)
(U401)
RGB
RGB
(CN101)
(CN102)
LED
D801 L801
(CN803)
MOSFET
(Q806)
MP3389EF
(U801)
DIM

AOC 50ID B
絬 隔 瓜 絪 腹 AOC 50ID A
称爹

B05

3 8 Thursday , May 12, 2011
R121 100R 1/16W 5%
TPV MODEL
PCB NAME
R104
R142
T P V ( Top Victory Electronics Co . , Ltd. )
VGA_CABLE_DET 5 VGA_CABLE_DET
R123
2K2 1/16W 5%
R119 0R05 1/10W
R122
2K2 1/16W 5%
FB104
VSIN0 HSIN0
100N16V
RLZ5.6B
ZD101
VGA_5V
GIN0
RIN0 DDCSCL_A
I/O2 3 I/O3 4 VDD 5 I/O4 6
AZC399-04S
GND 4 SDA 5 SCL 6 WP 7 VCC 8
I/O1 1
GND 2
DET_VGA
VGA_5V DDCSCL1
BIN0-
BIN0
GIN0-
GIN0
DDCSDA1 5 RIN0-
RIN0
DET_VGA
BIN0
VGA_5V
CN101 D-SUB 15P
1 6 2 7 3 8 4 9 5
R114 22K 1/16W 5%
100N16V
ESD_VGA U102
+5V 4,5,7
VGA_5V
DDCSCL_A
DDCSDA_A
R113 4K7 1/16W 5%
HSIN0
VSIN0
6. Schematic 6.1 Main Board 715G4798M0E000004L
47R 1/16W 5%
47R 1/16W 5%
VSIN0
HSIN0
R112 4K7 1/16W 5%
I/O2 3 I/O3 4 VDD 5 I/O4 6
AZC399-04S
R101
R105
DDCSCL1
DDCSDA1
I/O1 1
GND 2
DDCSDA1
DDCSDA_A
DDCSCL1 5
EDID_WP 4,5



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
T P V ( Top Victory Electronics Co . , Ltd. )
PB[0..9] 5 PA[0..9] 5
L/T_SCL L/T_SDA
RXO0RXO0+
RXO1RXO1+
RXO2+
RXOC+
RXO3RXO3+
RXE0+
RXE1RXE1+
RXE2RXE2+
RXECRXEC+
RXE3RXE3+
PA4 LVA2P PA3 LVACKM
NC
PA1 LVA3M
PA2 LVACKP
PA5 LVA2M
PA7 LVA1M
PA9 LVA0M
PA0 LVA3P
PA6 LVA1P
PA8 LVA0P
![AOC E2251SWDN — PB[0..9] diagram (page 27)](/cdn/reader/0f/0f852e611a01d02c7657ce9e40cb1dcf0e8e3a75b1eb866aa69872d0db3dd53d/images/rimg-37.webp)
RXOC+
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29
PA[0..9]
CN407
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
RXO2-
RXOC-
RXE0-
RXEC-
RXEC+

絬 隔 瓜 絪 腹 AOC 50ID D
7 8 Friday , May 13, 2011 POWER
TPV MODEL
PCB NAME
T P V ( Top Victory Electronics Co . , Ltd. )
+5V 3,4,5

+5V
< 0.8V @ 600mA

100UF 16V

2N2 50V
R726
VIN 1 EN 2 UGND 3 VCC 4 LX 5
FB 7
GND 8
APW7080KAITRL
U705
CN701
10K 1/16W 5%
JACK
10K 1/16W 5% R703
ZD703 PTZ9.1B
R704 22K 1/16W 5%
100R 1/16W 5%
+5V
4K7 1/16W 5%
R706
LMBT3904LT1G
BEAD 1 2
R705
100N 50V
FB701
R702
Q701
100N 50V
+5V
+5V
NC/100N16V
BKLT_VBR1
100N16V
BKLT_EN
+12V 8
1N 50V
100K 1/16W 5%
33K 1/16W 5%
R712
R711
BKLT_VBR1 8
BKLT_EN 8
+12V

715G4798-M0A < 称爹 > SCALER
+5V
R450 NC/0R05 1/16W
R448 0R05 1/16W
LED_A
称爹
LVB3P PB0
LVB3M PB1
LVBCKP PB2
LVB2P PB4 LVBCKM PB3
LVB2M PB5
LVB1P PB6
LVB1M PB7
LVB0M PB9 LVB0P PB8
LMBT3906LT1G
0R05 1/10W
VGA_CABLE_DET 3 VGA_CABLE_DET
DVI_CABLE_DET 4
NC/0.22UF 16V
Q404
R455
PB[0..9]
NC/100R 1/10W 5%
4K7 1/16W 5%
NC/100R 1/10W 5% R461
SYSTEM_EEPROM_WP
L/T_SDA 6 L/T_SCL 6
U402
A0 1
GND 4 SDA 5 SCL 6 WP 7 VCC 8
A2 3
NC/M24C16
1UF 10V
CABLE_DET DVI_CABLE_DET
R451
LEDA
5 8 Thursday , May 12, 2011
DDCSCL1 3 DDCSDA1 3 R421 0R05 1/16W R419 0R05 1/16W
4K7 1/16W 5%
V33P
R437 100K 1/16W 5%
R438 220K 1/16W 5%
SYSTEM_EEPROM_WP
EDID_WP EDID_WP 3,4
R476
TPV MODEL
PCB NAME
PA0 LVA3P
PA1 LVA3M
LVACKP PA2
LVACKM PA3
PA4 LVA2P
PA5 LVA2M
PA6 LVA1P
PA7 LVA1M
PA8 LVA0P
PA9 LVA0M
C421 NC
+5V 3,4,7
NC/100K 1/16W 5%
NC/200K 1/16W 5%
R436
390K
T P V ( Top Victory Electronics Co . , Ltd. )
R480 100R 1/16W 5% R481 100R 1/16W 5% KEY2
DET_+5V
R475
4K7 1/16W 5%
R484
R485
V33P
R478 47R 1/16W 5% R477 47R 1/16W 5%
715G4798-M0A-000-0040_101101
R404 NC/22K 1/16W 5%
PA[0..9]
+5V
R403 NC/4K7 1/16W 5%
C410 100N16V
C419 100N16V
R482 100R 1/16W 5%
+5V
LED_G
R444 0R05 1/16W
200R 1/10W 5%
DET_+5V
R402 NC/4K7 1/16W 5%
NC/100R 1/16W 5%
NC/100R 1/16W 5%
LMBT3906LT1G
CABLE_DET
R443 NC
R446
PA[0..9] 6
EESDA
EESCL
Q402
R406
R407
EESDA EESCL
TCON[9][11] / IICSDA / GPIO 57 TCON[7][10] / DDCSCL1 / GPIO 58 TCON[3][5] / DDCSDA1 / GPIO 59 VCCK 60 PGND 61 PVCC 62 TCON[1][8] / PWM2 / GPIO 63 SD0 / SPDIF0 / TCON[0][7] / GPIO / PWM0 64
A-ADC0 / GPIO 50 A-ADC1 / GPIO 51 A-ADC2 / GPIO 52 A-ADC3 / GPIO 53 GPIO 54 TCON[0][5] / PWM1 / PWM5 / GPIO 55 TCON[1][4] / IICSCL / GPIO 56
GPIO 47 PWM0 / GPIO 48
GPIO 46
GPIO 45
GPIO 44
IICSDA / GPIO 43
IICSCL / GPIO 42
GPIO/TCON[5] 41
GPI 40
GPI 39 XO 127
2K2 1/16W 5%
R460
R445
LEDG
100N16V
R03 R0+ 3
B0+ 3 G03 G0+ 3 SOG 3
AVS0 3 AHS0 3 B03
BB3P / WS / TCON[7][1] / GPI / GPO / PWM1 65
BB3N / SCK / TCON[4][2] / GPI / GPO / BLU7 66 BB2P / MCK / TCON[5][9] / GPI / GPO / BLU6 67 BB2N / SD0 / SPDIF 0 / TCON[13][3] / GPI / GPO / BLU5 68
PA9 LVA0M
PA8 LVA0P
PA7 LVA1M
PA6 LVA1P
PA4 LVA2P PA5 LVA2M
LVACKM PA3
LVACKP PA2
PA1 LVA3M
PA0 LVA3P
BB1P / SPDIF1 / SD1 / TCON[7][3] / GPI / GPO / IICSCL / BLU4 69 BB1N / SPDIF2 / SD2 / TCON[9][11] / GPI / GPO / IICSDA / BLU3 70 BCLKP / SPDIF3 / SD3 / TCON[10][8] / GPI / GPO / PWM1 / PWM5 / BLU2 71 BCLKN / TCON[6][12] / GPI / GPO / PWM3 72 NC 73 BG3P / BLU7 / BLU1 / GPI / GPO / TXO3+_8b / IIS_SD0 (SPDIF0) 74 BG3N / BLU0 / BLU6 / GPI / GPO / TXO3-_8b / IIS_MCK (SPDIF1) 75 BG2P / GRN7 / GPI / GPO / BLU5 / TXOC+_8b 76 BG2N / GRN6 / GPI / GPO / BLU4 / TXOC-_8b 77
37 GPI
36 GPI
35 GPI
100N16V
GPI
34 GPI
V12ADC
R0+
GPI
SOG0
R0-
BG1P / GRN5 / GPI / GPO / BLU3 / TXO2+_8b / IIS_SCK (SPDIF2) 78 BG1N / GRN4 / GPI / GPO / BLU2 / TXO2-_8b / IIS_WS (SPDIF3) 79 BR3P / GRN3 / GPI / GPO / GRN7 / TXO1+_8b 80 BR3N / GRN2 / GPI / GPO / GRN6 / TXO1-_8b 81 BR2P / GRN1 / GPI / GPO / GRN5 / TXO0+_8b 82 BR2N / GRN0 / GPI / GPO / GRN4 / TXO0-_8b 83
G0-
1UF 10V
RTD2281W-CG
B0-
B0+
ADC_VDD
AHS0
V33P
C408 100N16V
PVCC 84 PGND 85 BR1P / RED7 / GRN3 / TXE3+_8b 86
AVS0
BR1N / RED6 / GRN2 / TXE3-_8b 87 AB3P / RED5 / RED7 / TXEC+_8b 88 AB3N / RED4 / RED6 / TXEC-_8b 89 AB2P / RED3 / RED5 / TXE2+_8b 90 AB2N / RED2 / RED4 / TXE2-_8b 91 AB1P / RED1 / RED3 / TXE1+_8b 92 AB1N / RED0 / RED2 / TXE1-_8b 93 ACLKP / DENA / TXE0+_8b 94 ACLKN / DHS / TXE0-_8b 95 AG3P / DCLK / GPI / GPO / PWM0 96 AG3N / DVS / GPI / GPO / PWM1 97 AG2P / GPI / GPO/ PWM2 98 AG1P / GPI / GPO / PWM4 / TCON[12][3] 100 AG1N / GPI / GPO / PWM5 / TCON[0] 101 AR3P / SD3 / SPDIF3 / TCON[10] / GPI / GPO / PWM0 102
RXCP_1
RX0P_1
RX0N_1
RX1P_1
RX1N_1
RX2P_1
RX2N_1
TMDS_GND
NC
LVB3P PB0
LVB3M PB1
LVBCKP PB2
LVBCKM PB3
LVB2P PB4
LVB2M PB5
LVB1P PB6
LVB1M PB7
LVB0P PB8
LVB0M PB9
NC
NC
AG2N / GPI / GPO / PWM3 / TCON[11][6] 99
NC
NC
NC
AR3N / SD2 / SPDIF2 / TCON[8] / GPI / GPO / IICSCL / PWM1 103
NC
AR2P / SD1 / SPDIF1 / TCON[5] / GPI / GPO / IRQB / IICSDA 104
SD3(MCK) / SPDIF3 / TCON[0][13] / PWM4 / GPIO 114
AR2N / SD0 / SPDIF0 / TCON[9] / GPI / GPO 105
RX24 RX2+ 4
RX04 RX0+ 4 RX14 RX1+ 4
RXC4 RXC+ 4
R434
NC
AR1P / MCK / TCON[7] / GPI / GPO 108
AR1N / SCK / TCON[3] / GPI / GPO 109
WS(SD1) / TCON[2][6][7] / GPIO 110
SD0 / SPDIF0 / TCON[4][7] / GPIO 111
100N16V
V33TMDS
SPI_SCLK / SDIO 115
DDCSCL3 / GPIO 121
DDCSDA3 / GPIO 122
DDCSCL2 / GPIO 124 DDCSDA2 / GPIO 123
SI / MCU_SCLK 116
GPO / PWM5 119
GPIO / PWM1 126
U401
SO / SCSB 117
CEB / IRQB 118
RESETB 125
PVCC 106
PGND 107
VCCK 120
R424 0R05 1/16W
DDCSDA2 4 R425 0R05 1/16W
R415 4K7 1/16W 5%
FLASH_WP
R479 100R 1/16W 5% POWER
LEDG R416 10K 1/16W 5%
XI XO
NC/3K9 +/-5% 1/16W R409
SDOUT
CLK
SDIN
CE
C422 100N16V
R410
C411 100N16V
D401
RLZ5.6B
LEDA
C406 100P 50V
HPD_CTRL 4
DDCSCL2 4
NC/3K9 +/-5% 1/16W
D403
RLZ5.6B
4K7 1/16W 5%
C405 100P 50V
SDOUT
D402 NC/RLZ5.6B
NC/120 OHM
R459
CE
CLK R428 10K 1/16W 5% FLASH_WP
R433 22R 1/16W 5% SDIN
V33P
R467
4K7 1/16W 5%
LED_A
FB407
RESETB
C404 100P 50V
R427 22R 1/16W 5%
R429 22R 1/16W 5%
FB408 120 OHM
NC/3K9 +/-5% 1/16W
C403 100N16V
V33P
R408
V33TMDS VCC3.3 7
R420
4K7 1/16W 5%
C402 100N16V
NC/120 OHM
NC/100N16V
V33P VCC3.3
POWER
LED_G
LED_A
FB401
KEY2 KEY1
120 OHM 1 2
120 OHM 1 2
XO
R452 0R05 1/16W R453 0R05 1/16W
0R05 1/16W
0R05 1/16W
CE# 1
SO 2
WP# 3
GND 4
R439
R483
R440 NC
R441 NC
FB403
FB404
R442
U403
HOLD# 7
NC
TOUCH_POWER
VDD 8
SCK 6
SI 5
D404
NC/RLZ5.6B
14.31818MHZ/32PF
R431 22R 1/16W 5%
10K 1/16W 5%
CN405
1 2 3 4 5 6
CONN
NC
R426
NC/CONN
NC/CONN
220N16V
CN403
1 2 3 4 5 6 7
1 2 3 4 5 6
CN401
1 2 3 4 5 6 7 8
CN404
1 2 3 4 5 6 7

8 8 Thursday, May 12, 2011 CONVERT

1 2 3 4 5 6 7 8 9 10
PCB NAME
T P V ( Top Victory Electronics Co . , Ltd. )
D801
It is suitable for 18.5", 20",21.5'' & 23" LED panel
LED9 14 LED8 15 LED7 16 LED6 17 LED5 18 LED4 19 LED3 20 LED2 21 LED1 22 OVP 23 ISENSE 24 PGND 25 GATE 26 VFAULT 27 NC 28
R811
R804 100K 1/16W 5%
R810 20K 1/10W 5%
R802 270K +-1% 1/10W
0.2 ohm
0.2 ohm
R819
230W
6.2K
33K 1/16W 5%
39K
C801 0.47uF 16V
C808 NC
0.12 ohm
215W
6.2K
270K
NC
R806 1K 1/10W 5%
R808 1K 1/10W 5%
0.15 ohm
6.8K
270K
R813
0R05
NC
0.15 ohm
190W
6.2K
NC
NC
BKLT_EN 7
BKLT_VBR1 7
R809
R834
R812
R816
+12V

715G4164-K0C 2.0 Touch key
絬 隔 瓜 絪 腹 e943Fw C
CABLE
称爹
1 2 3 4 5 6
5V_LED DATA SM_CLK
CLK
R005 0R05 1/16W
2 2 Tuesday , April 19, 2011
SM_DATA
TPV MODEL
PCB NAME
ZD002
UDZSNP5.6B
ZD001
T P V ( Top Victory Electronics Co . , Ltd. )
Dif f erential KEY0.1524
CIN_05
4K7 1/16W 5%
12P 50V
R003
PWR_1 KEY0.1524

MENU_5 KEY0.1524 +_3 KEY0.1524
MENU
4K7 1/16W 5%
GPIO_01
GPIO_00
R008
4K7 1/16W 5%
GPIO0 13 GPIO1 14 CIN00 15 CIN01 16 E-PAD 17
CIN_11
IT7230EFN/BX
5V_LED
CIN_07
CIN_09
CIN_11
D001
CIN_01
6.2 Key Board 715G4842K0E000004F
100R 1/16W 5%
100P 50V
R004
VBIAS
AC_SHIELD
CIN_03
KEY0.1524
TP2










Check power cable is
Re-plug the power cable
NG
Turn on the Power “On/Off” switch
Check the LED indicate is OK?
Check the AC power
Replace main board and check connections
Replace key board and check connections

No Video (Power LED White)
Replace the main board
OK
Replace the main board and connection
OK
Replace the key board

DIM (image overlap, focus or flicker)
OK
Reset in factory mode
Set to the optimal frequency, select the recommended frequency
NG
OK
Readjust the phase and pixel clock in the user mode
Pull out signal cable and check “Self Test Feature
Check the signal cable
NG
OK
Replace the main board
OK

Color is not optimal
Miss color Color shift
Reset the factory mode
Replace the signal cable
OK
In the user mode, set the” color
settings” until customer satisfy
Pull out the signal cable
and check the screen color display is normal?
OK
Replace the signal cable or PC
Replace the main board
The end

Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment.
How to setting MEM channel you can reference to chroma 7120 user guide or simpl use “SC” key and “NEXT” Key
to modify xyY value and use “ID” key to modify the TEXT description Following is the procedure to do white-balance
adjust .
A. MEM.CHANNEL 3 Warm (6500K):
Warm color temp. parameter is x = 313 ±30, y = 329 ±30
B. MEM.CHANNEL 4 Normal (7300K):
Normal color temp. parameter is x = 301 ±30, y = 317 ±30
C. MEM.CHANNEL 9 Cool (9300K):
Cool color temp. parameter is x = 283 ±30, y = 297 ±30
D. MEM.CHANNEL 10 (sRGB color):
sRGB color temp. parameter is x = 313 ±30, y = 329 ±30
Turn off the power, press two direction keys and turn the power on. Then press the “MENU” button. The factory OSD will appear.
Move cursor to “-F-” and press MENU key
A. Adjust Warm (6500K) color-temperature
B. Adjust Normal (7300K) color-temperature

C. Adjust Cool (9300K) color-temperature
D. Adjust sRGB color-temperature
E. Turn the Power-button off to quit from factory mode.



1 BEZEL
3 RUBBER FEET
9 Base No. Part No. Description
10 Stand plate 16 0D1G1030--8120 SCREW(MAIN BOARD/MAIN FRAME)
12 MYLAR 18 0M1G3130--5-47-CR3 SCREW(REAR COVER/MAIN FRAME)
13 KEY BOARD 19 0M1G1730--8225-CR3 SCREW(STAND/HINGE)
14 PANEL 20 0Q1G1030--6120 SCREW(STAND PLATE/BASE)
15 MAIN BOARD 21 F01G6064--4 SCREW(STAND PLATE/HINGE)

to http://cs.tpv.com.cn/hello1.asp for the latest information.



T, X, X, N, S, S, N, X, X, 1, 02150, Bottom, 01
C115 0CH2103K562 10NF, K, 50V, X7R, 0.9mm, 1608, R/TP
C915,C916 0CH2104H942 0.1uF, Z, 25V, Y5V, 0.9mm, 1608, R/TP
C79,C911 0CH2473H562 47nF, K, 25V, X7R, 0.9mm, 1608, R/TP
08 0CH2A-0007A 1U F, 10 Volt, K PER, X5R(JB), 1608 R/TP,
0CH2A-0011A 10U F, 16 Volt, K PER, X5R(JB), 3216 R/TP,

C73 0CH2A-0017A 2.2U F, 10 Volt, K PER, X5R(JB), 1608 R/TP,
C313,C314,C3
15,C318,C52,
C61,C62,C63,
0CH2A-0026A 10U F, 25 Volt, K PER, X5R(JB), 3225 R/TP,
T=1.0(MAX)
C913,C914,C9
20,C921
C312 0CH2A-0038A 0.1U F, 25 Volt, Z PER, Y5V(JF), 1005 R/TP,
C701 0CH2A-0049A 1.5nF, 50, -10~+10(K), 1608, X7R(JB)
C75 0CH2A-0088A 3.3nF, K, 50V, X7R, 0.9mm, 1608, R/TP
C912 0CH2A-0091A 1uF, K, 25V, X5R, 0.6mm, 1005, R/TP
ZD1 0DHZL-0061A SDZ6V2D, AUK, SOD-323, R/TP
D6 0DHZL-0095A RB050M-30, ROHM, PMDU, R/TP
F1 0FFST-0002A F0603FA2500V032T, AEM, 2.5, 32 Volt,
1.6X0.8X0.8, SMT, Ceramic, UL/CSA
DFN3030-10, R/TP, 10
UC2 0IIML-0004A iML7821BE, IML, 5V~20V, 320mA, 20V/us,
40MHz, 1Ch, TSOT, R/TP, 5Pin
U4 0ISGL-0008C M24C04-RDW, STmicroeletronics, 4K, 5ms,
SM4025, SILICON MITUS, MONITOR,
US2 0ISML-0007A
BOOST+L/S(GPM)+OP-AMP+PVCOM+DISCHA
RGING,
UC1 0ISWL-0078A SW0640, SIW, LVDS, 6/8, 2, MINI-LVDS, 6, 1,
TNI8016-100M, DACOWELL, 10UH, M=20%,
L1 0LCAA-0069B
2.1A, 0.093, 8.0X11.0X1.8 (1.2MM, IN-BOARD),
R/TP
FL4,FL5,R103,
R109,R118,R1
19,R121,R125,
0RH0000C622 0 OHM 1/16W 1608 5% D R/TP
R126,R127,R1
29,R138,R139,


R131 0RH0102C422 10 OHM 1/16W 1608 1% D R/TP
R701 0RH0221C622 2.2 OHM 1/16W 1608 5% D R/TP
R322 0RH0472C422 47 OHM 1/16W 1608 1% D R/TP
R2,R3 0RH1000C422 100 OHM 1/16W 1608 1% D R/TP
R1 0RH1001C422 1K OHM 1/16W 1608 1% D R/TP
R24,R55 0RH1002C422 10K OHM 1/16W 1608 1% D R/TP
35,R244,R255 0RH1102C422 11K OHM 1/16W 1608 1% D R/TP
R214 0RH1201C422 1.2K OHM 1/16W 1608 1% D R/TP
R212 0RH1202C422 12K OHM 1/16W 1608 1% D R/TP
R211 0RH1301C422 1.3K OHM 1/16W 1608 1% D R/TP
R150 0RH1500C422 150 OHM 1/16W 1608 1% D R/TP
7 0RH1502C422 15K OHM 1/16W 1608 1% D R/TP
R114,R136 0RH1601C422 1.6K OHM 1/16W 1608 1% D R/TP
77 0RH1602C422 16K OHM 1/16W 1608 1% D R/TP
R115 0RH2201C422 2.2K OHM 1/16W 1608 1% D R/TP
R50,R51 0RH2401C422 2.4K OHM 1/16W 1608 1% D R/TP
R904 0RH2402C422 24K OHM 1/16W 1608 1% D R/TP
06,R261 0RH2700C422 270 OHM 1/16W 1608 1% D R/TP


R243,R253 0RH2702C422 27K OHM 1/16W 1608 1% D R/TP
34,R245 0RH3302C422 33K OHM 1/16W 1608 1% D R/TP
R201 0RH3900C422 390 OHM 1/16W 1608 1% D R/TP
R146 0RH3902C422 39K OHM 1/16W 1608 1% D R/TP
7 0RH4700C422 470 OHM 1/16W 1608 1% D R/TP
R202 0RH4702C422 47K OHM 1/16W 1608 1% D R/TP
78,R905 0RH5101C422 5.1K OHM 1/16W 1608 1% D R/TP
R117 0RH5102C422 51K OHM 1/16W 1608 1% D R/TP
R222 0RH5602C422 56K OHM 1/16W 1608 1% D R/TP
R252 0RH6201C422 6.2K OHM 1/16W 1608 1% D R/TP
R254 0RH6202C422 62K OHM 1/16W 1608 1% D R/TP
1,R251 0RH8201C422 8.2K OHM 1/16W 1608 1% D R/TP
R221 0RH9101C422 9.1K OHM 1/16W 1608 1% D R/TP
R910 0RH9102C422 91K OHM 1/16W 1608 1% D R/TP
0TRRL-0019A MMBT4403, Diodes, PNP, R/TP, SOT-23, H/F, 3 2nd SOURCE
0TRRL-0020A MMBT4401, Diodes, NPN, R/TP, SOT-23, H/F, 3 2nd SOURCE
RT1 6322L-0004A 22K ohm, +-3%, 125, 0.21, 3950, 1608, R/TP


CN1 6630L-0157B FI-XB30SL-HF10, JAE, 30 Pin, 1 mm, Angle, Sn,
6630L-0410A IS100-L30F-C15, UJU, 30 Pin, 1 mm, Angle, Sn,


C716 067G204V471-2L CS CAP 470uF +-20% 10V 8*8 LELON
067G204V471-2K CS CAP 470uF 10V 8*8 mm 2nd SOURCE
C718,C811 067G215C151-4H EC 150uF +-20% 25V 8*7mm 700mA 2000Hr
067G415R479-9K EC 4.7UF 20% 100V ED 8*12 2nd SOURCE
088G-35315FVCL D-SUB CONN WITH SCREW 15P BLUE CL 2nd SOURCE
CN102 088G354GOF1VXH DVI CONN WITH SCREW 24P WHITE XIANHE


C141,C707 F67G305M1013GV 100uF +-20% 16V 105 ℃ 2000H 6.3*7
U702 056G-563512--C IC LDO G1117-33PT43U 1A 3.3V TO-252 GMT
056G1133-34--1 IC EEPROM M24C02-RMN6TP 2Kb SO-8 ST 2nd SOURCE

057G-763940 MOSFET AO3401A 4.2A/30V SOT-23 AOS 2nd SOURCE
24,R425,R439,
061G0402000-JT RST CHIPR MAX0R05 1/16W TZAI YUAN
R444,R448,R4
52,R453,R483
R104,R109,R1
16,R131,R132,
061G0402100-JT RST CHIPR 10 OHM +-5% 1/16W 0402 TZAI
YUAN
35,R136,R137,
R138
R120,R121,R4
22,R479,R480,
061G0402101-JT RST CHIPR 100 OHM +-5% 1/16W 0402 TZAI
YUAN
R127,R142,R1
49,R150 061G0402102-JT RST CHIPR 1 KOHM +-5% 1/16W 0402 TZAI
R416,R428,R4
061G0402103-JT RST CHIPR 10 KOHM +-5% 1/16W 0402 TZAI
YUAN
R719
R437,R712,R7
21,R804 061G0402104-JT RST CHIPR 100 KOHM +-5% 1/16W 0402 TZAI
R427,R429,R4
31,R433 061G0402220-JT RST CHIPR 22 OHM +-5% 1/16W 0402 TZAI
R122,R123,R4
45 061G0402222-JT RST CHIPR 2.2 KOHM +-5% 1/16W 0402 TZAI
R720 061G0402223-JI RST CHIPR 22 KOHM +-5% 1/16W 0402 TA-I
04 061G0402223-JT RST CHIPR 22 KOHM +-5% 1/16W 0402 TZAI
R438 061G0402224-JT RST CHIPR 220 KOHM +-5% 1/16W 0402 TZAI
R726 061G0402303-JT RST CHIPR 30 KOHM +-5% 1/16W 0402 TZAI
R711,R803,R8
19 061G0402333-JT RST CHIPR 33 KOHM +-5% 1/16W 0402 TZAI
R436 061G0402394-JF RST CHIPR 390 KOHM +-5% 1/16W 0402
R101,R105,R1
061G0402470-JT RST CHIPR 47 OHM +-5% 1/16W 0402 TZAI
YUAN
R125,R126,R4


061G0402472-JT RST CHIPR 4.7 KOHM +-5% 1/16W 0402 TZAI
17 061G0402750-JT RST CHIPR 75 OHM +-5% 1/16W 0402 TZAI
455 061G0603000-JT RST CHIP MAX 0R05 1/10W TZAI YUAN
R713 061G0603100-JT RST CHIPR 10 OHM +-5% 1/10W 0603 TZAI
R714 061G06031002FF RST CHIPR 10 KOHM +-1% 1/10W 0603
R806,R808 061G0603102-JT RST CHIPR 1 KOHM +-5% 1/10W 0603 TZAI
R827,R830 061G0603109-JT RST CHIPR 1 OHM +-5% 1/10W 0603 TZAI
R811 061G0603151-JT RST CHIPR 150 OHM +-5% 1/10W 0603 TZAI
R446 061G0603201-JT RST CHIPR 200 OHM +-5% 1/10W 0603 TZAI
R807,R810 061G0603203-JT RST CHIPR 20 KOHM +-5% 1/10W 0603 TZAI
R841,R842 061G0603229-JT RST CHIPR 2.2 OHM +-5% 1/10W 0603 TZAI
R802,R834 061G06032703FF RST CHIPR 270 KOHM +-1% 1/10W 0603
R430,R809 061G06036201FF RST CHIPR 6.2 KOHM +-1% 1/10W 0603
R801 061G0805100-JT RST CHIP 10R 1/8W 5% TZAI YUAN
R805 061G0805304-JT RST CHIP 300K 1/8W 5% TZAI YUAN
R813 061G12060004JT RST CHIP MAX 0R05 1/4W TZAI YUAN
R146,R147 061G1206301-JT RST CHIPR 300 OHM 1/4W TZAI YUAN

C404,C405,C4
06 065G040210131J---Y MLCC 0402 100pF +-5% 50V NPO YAGEO
15,C117,C118,
C119,C142,C4
02,C403,C408,
C409,C410,C4
065G040210412K---A MLCC 0402 0.1uF +-10% 16V X7R SAMSUNG
C419,C422,C7
08,C709,C717,
C721,C725
C416,C420 065G0402105A5K---A MLCC 0402 1uF +-10% 10V X5R SAMSUNG
065G0402105A5K---T MLCC 0402 1uF -10% 10V X5R TAIYO YUDEN 2nd SOURCE
51,C415,C418,
065G040222031J---T MLCC 0402 22pF +-5% 50V NPO TAIYO YUDEN
C722 065G040222232K---Y MLCC 0402 2.2nF +-10% 50V X7R YAGEO
C147 065G040222322K---Y MLCC 0402 22nF +-10% 25V X7R YAGEO
12,C724 065G040222415K---T MLCC 0402 0.22uF +-10% 16V X5R TAIYO
C102,C104,C1
05,C107,C108,
065G040247312K---A MLCC 0402 47nF +-10% 16V X7R SAMSUNG
09 065G040250931C---Y MLCC 0402 5pF +-0.25pF 50V NPO YAGEO
05,C806,C809,
065G060310131J---A MLCC 0603 100pF +-5% 50V NPO SAMSUNG
065G060310131J---M MLCC 0603 100pF -5% 50V NPO MURATA 2nd SOURCE
C715 065G060310232K---Y MLCC 0603 1000pF +-10% 50V X7R YAGEO
10,C812 065G060310432K---Y MLCC 0603 0.1uF +-10% 50V X7R YAGEO
C713,C728 065G060310525K---T MLCC 0603 1uF +-10% 25V X5R TAIYO YUDEN
065G060310525K---3 NO-SUGGEST MLCC 0603 1uF -10% 25V X5R
C801 065G060347412K---A MLCC 0603 0.47uF +-10% 16V X7R SAMSUNG
2nd SOURCE


C802 065G060368332K---Y MLCC 0603 68nF +-10% 50V X7R YAGEO
25 065G0805106A5K---A MLCC 0805 10uF +-10% 10V X5R SAMSUNG
C813,C814 065G080522232K---Y MLCC 0805 2200pF +-10% 50V X7R YAGEO
C803,C804 065G080547432K---T MLCC 0805 0.47uF +-10% 50V X7R TAIYO
065G080547432K---M MLCC 0805 0.47uF -10% 50V X7R MURATA 2nd SOURCE
C720,C723 065G120610625K---A MLCC 1206 10uF +-10% 25V X5R SAMSUNG




F95G176X-10103 FFC CABLE 10P 326MM P0.5MM WENXIN 2nd SOURCE
F95G179J30N102 FFC CABLE 30P 241MM P1.0MM KOTL 2nd SOURCE
F95G-76X--6603 FFC CABLE 6PIN 344MM 1.0MM WENXIN 2nd SOURCE
F95G-76J--6603 FFC CABLE 6PIN 344MM 1.0MM KOTL 2nd SOURCE
R004 061G0402101-JT RST CHIPR 100 OHM +-5% 1/16W 0402 TZAI
R001 061G0402103-JT RST CHIPR 10 KOHM +-5% 1/16W 0402 TZAI
07,R008 061G0402472-JT RST CHIPR 4.7 KOHM +-5% 1/16W 0402 TZAI
C008 065G040210131J---Y MLCC 0402 100pF +-5% 50V NPO YAGEO
065G040210131J---A MLCC 0402 100pF -5% 50V NPO SAMSUNG 2nd SOURCE
07 065G040210427Z---Y MLCC 0402 0.1uF -20%+80% 25V Y5V YAGEO
065G040210427Z---T MLCC 0402 0.1uF -20% 80% 25V Y5V TAIYO
C011 065G0402105A5K---A MLCC 0402 1uF +-10% 10V X5R SAMSUNG
065G0402105A5K---T MLCC 0402 1uF -10% 10V X5R TAIYO YUDEN 2nd SOURCE
C003,C004 065G040212031J---Y MLCC 0402 12pF +-5% 50V NPO YAGEO
065G040212031J---A MLCC 0402 12pF -5% 50V NPO SAMSUNG 2nd SOURCE

E715 715G4842K01000004S Key Board FR-4 105*11*1.2mm 16
715G4842K01000004F Key Board FR-4 105*11*1.2mm 16 2nd SOURCE
715G4842K01000004L Key PCB FR-4 105*11*1.2mm 16 2nd SOURCE
Q40G000161514A CARTON LABEL(70*80)
Q40G0001624-4A PALLET LABEL
Q41G78D1615-9A WARRANTY CARD
Q45G2010M0201A pe bag for manual
Q45G8801607--7 pe bag
Eigenaren en ons team reageren doorgaans binnen een dag — en uw vraag helpt ook de volgende persoon.
Stel als eerste een vraag — andere eigenaren of ons team geven antwoord.