Gebruiksaanwijzing /service van het product N2041S van de fabrikant AOC
Ga naar pagina of 62
.
2 Safety......................................................................................................................... ............................................... 4 National C onventio ns ................................................
3 HG Declar ation ................................................................................................................. ............................... 56 EPEA T Declar ation ................................................................
4 Safety National Conventions The following subsections describe n otational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text ma y be accompanied by an icon and printed in b old type or in italic type.
5 Power The monitor should be operat ed only from the type of power source indicated on th e lab el. If you are not sure of the type of power supplied to your hom e, consu lt your dealer or local power company . The monitor is equipped with a three-pronged grounded plu g, a plu g with a third (grounding) pin.
6 Inst allation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
7 Cleaning Clean the cabinet regularly with the cloth provided. Y ou can use soft-detergent to wipe out the stain, instead of strong-detergent which will c auterize the product cabinet. When cleaning, make sure no detergent is leaked into the product.
8 Other If the product is emitting a strange smell, sound or smoke, disconnect the po wer plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openin gs are not blocked by a table or curtain. Do not engage the LCD monitor in sever e vib r ation or high impact conditions during o per ation.
9 Setup Content s in Box Not all signal cables (Ana log, USB, DVI, and HDMI cables ) will be pr ovided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation. Webcamera will be not provided for customers.
10 Setup S t and & Base Please setup or remove the base follo wing the step s as below . Setup: Remove:.
11 Adjusting V iewing Angle For optimal viewing it is recommended to look at the full fa ce of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not toppl e the mon i tor when you change the monitor's angl e.
12 Connecting the Monitor Cable Connections On Back of Monitor and Computer: 1. Power 2. Analo g (DB-15 VGA cable) 3. USB T o protect equipment, always turn of f the PC and LCD monitor before conn ecting. 1 Connect the power cable to the AC port on the back of the monitor .
13 W all Mounting Preparing to Install An Optional Wall Mounting Arm. This monitor can be attached to a wall mounting arm you p urchase separately . Disconnect power before this procedure. Follow these steps: 1 Remove the base an d stand. 2 Follow the manufacturer' s instructi ons to assemble the wall mounting arm.
14 Adjusting Setting Optimal Resolution Windows Vist a For Windows Vist a: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Pers onalization.
15 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1 600 by 900 ..
16 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearan ce and Themes. 5 Double click DISPLA Y ..
17 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to 1 600 by 900 . Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1 600 by 900 .
18 Hotkeys Power Press the Power button to turn 0n/off the monitor . Eco Mode / < Press the Eco key continuously to select the Eco m ode of brightness when there is no OSD ( Eco mode hot key may not be available in all models). 4:3 or wide image ratio / > When there is no OSD, pr ess hotkey continu ously to c hange 4:3 or wide image ratio.
19 OSD Setting Basic and simple instruction o n the control keys. 1) Press the MENU-button to activate the OSD window . 2) Press < or > to navigate through the functions. Once t he desired function is highlighted, press the MENU-button to activate sub-menu .
20 Luminance Press Menu to display MENU Press (Menu) to display menu. Press or to select (Luminance) , and press to enter . Press or to select submenu, press to enter , and press or to adjust.
21 Brightness 0-100 Backlight Adjustment Contrast 0-100 Contra st from Digital-register. Standard Standard Mode Tex t Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Eco mode Sports S.
22 Image Setup Press +/- select (Image picture), an d Press Menu to enter Press (Menu) to display menu. Press or to select (Image Setup) , and press to enter .
23 Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise H.Position 0-100 Adjust the horizontal positio n of the picture. V.Position 0-10 0 Adjust the vertical position of the picture.
24 Color T emperature Press (Menu) to display menu. Press or to select (Color T emperature) , and press to enter . Press or to select submenu, press to enter , and press or to adjust.
25 Warm 6500K Recall Warm Color Temperature from EEPROM. Normal 7300K Recall Normal Color T emperature from EEPROM. Cool 9300K Recall Cool Color T emperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM. Red Red Gain from Digital-register Green Green Gain Digital-register.
26 Color Boost Press (Menu) to display menu. Press or to select (Color Boost) , and press to enter . Press or to select submenu, press to enter , and press or to adjust.
27 Full Enhance on or off Disable or Enable Full Enhan ce Mode Nature Skin on or off Disable or Enable Nature Skin Mode Green Field on or off Disable or Enable Green F iel d Mode Sky-blue on or off Di.
28 Picture Boost Press (Menu) to display MENU. Press or to select (Picture Boost); and press to enter . Press or to select Bright Frame. Select “on” to activate Picture Boost. Press or to select submenu, press to enter , and press or to adjust. Press to exit.
29 Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightn ess Contrast 0-100 Adjust Frame Contrast H. position 0-100 Adjust Frame horizontal Position V.
30 OSD Setup Press (Menu) to display menu. Press or to select (OSD Setup) , and press to enter . Press or to select submenu, press to enter , and press or to adjust.
31 OSD Setup H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-10 0 Adjust t he vertical position of OSD Timeout 5-120 Adjust the OSD Timeout Transparence 0-100 Adjust the transparen.
32 Extra Press (Menu) to display menu. Press or to select (OSD Setup) , and press to enter . Press or to select submenu, press to enter , and press or to adjust.
33 Input Select D-SUB Select An alog Sigal Source as Input Auto Config yes or no Auto adjust the picture to default Image Ratio wide or 4:3 Select wide or 4:3 format for display DDC / CI yes or no T u.
34 Reset Press or to select YES or NO. Press (Menu) to display menu. Press or to select (Reset), and press to enter . Press to exit..
35 Reset yes or no Reset the menu to default.
36 Exit Exit Exit the main OSD Press (Menu) to display menu. Press or to select (Exit); and press to e xit ..
37 LED Indicator Stat us LED Color Full Power Mode Green or Blue Active-off Mode Orange or red.
38 Driver Monitor Driver Windows 7 1.S tart Windows® 7 2.Click on the 'St art' button and then cl ick o n 'Control Panel'. 3. Click on the 'Display' icon.
39 4.Ckick on the “Change display se ttings” button. 5. Click the “ A dvanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button.
40 7.Click the “Driver” tab. 8. Open the "Update Driver Soft ware-Generi c PnP Monitor" window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device driv ers on my computer" .
41 10. Click the “Have Disk” button. Click on the “Brow se” button and navigate to the following directory: X:Drivermodule name (where X is the dr ive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button.
42 Windows Vist a 1. Click "S tart " and "Control Panel". Then, doubl e-click on "Appearance and Personaliz ation". 2. Click "Personalization" and then "Dis play Settings". 3. Click "Advanced Settings.
43 4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , click "Continue".
44 Windows XP 1. S tart Windows® XP 2. Click on the 'S tart' button and t hen click on 'Control Panel'. 3. Select and click on the categor y ‘Ap pe aran ce and Theme s’ 4.
45 5. Select the 'Settings' tab then click on the 'Advanced' butt on. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your m onitor is properly configur ed. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button.
46 8. Select the 'Install from a list or specific location [ advanced]' radio button and the n click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.
47 Windows 2000 1. S tart Windows® 2000 2. Click on the 'S tart' button, point to 'S ettings', and then click on 'Control Pane l'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced.
48 i-Menu Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor d isplay setting by using on screen menus instead of the OSD button on the monitor .
49 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly conn ected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection an d po wer supply .
50 Monitor Is Stu ck In A ctive Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is prop erly connected to the computer . Inspect the monitor's video cable and mak e sure no pin is bent.
51 S pecification General S pecification Model number N 20 41 S Driving system TFT Color LCD Viewable Image Size 50.8 cm diagoanl Pixel pitch 0. 2768 mm(H) x 0.
52 Altitude: Operating 0~ 3 ,658 m (0~ 12, 000 ft ) Non-Operating 0~ 12,192 m (0~ 40, 000 ft ) Preset Display Modes VOET RESOLUTIE Horizontale frequentie (kHz) Verticale frequentie (Hz) VGA 640x480@60Hz 31.469 59.94 0 640x480@ 67 Hz 3 5.000 66.667 640x480@ 72 Hz 37.
53 Pin Assignment s Pin Number 15-Pin Side of the Signal Cabl e 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.
54 Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, dependi ng on th e level of DDC used, communicate additional information about its display capabilities.
55 Regulation FCC Notice FCC Class B Radio Freq u ency Interferen ce St at ement W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to compl y with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
56 WEEE Declaration Disposal of W aste Equipment by Users in Pr ivate Household in the Europe an Union. This symbol on the product or on its packaging indicates t hat this product must not be di sposed of with your other household wast e.
57 EPEA T Declaration EPEA T is a system to help purchasers in the public an d private sectors evaluate, compare and select desktop computers, notebooks and monitors ba sed on their environmental attributes .
58 Service W arranty St atement for Europe LIMITED THREE-YEAR W ARRANTY* AOC Color Monitors sold within Europe AOC International (Europe) GmbH warrant s this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of c onsumer purchase.
59 modified or altered; you bear the sole responsibility and liabilit y for any such modification or alteration. ALL EXPRESS AND IMPLIED W ARRANTIES FOR THIS PRODUCT (INCLUDING THE W ARRANT IES OF MER.
60 W arranty S t atement for North & South America (excluding Brazil) W ARRANTY ST A TEMENT for AOC Color Monitors Including those Sold within North America as S pecified Envision Peripherals, Inc.
61 ALL EXPRESS AND IMPLIED W ARRANTIES FOR THIS PRODUCT (INCLUDING THE W ARRANT IES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE) ARE LIMIT ED IN DURA T ION TO A PERIOD OF THREE (3) YEARS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM THE ORIGINAL DA TE OF CONSUMER PURCHASE.
62 W arranty S t atement for AP LIMITED THREE-YEAR W ARRANTY* AOC Color Monitors sold within AP AOC is one internal brand for its professional monitor ,T V technology ,af fordab le pric e and available service .Customer satisfaction-oriented is always what we are pursuing .
Een belangrijk punt na aankoop van elk apparaat AOC N2041S (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen AOC N2041S heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens AOC N2041S vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding AOC N2041S leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over AOC N2041S krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van AOC N2041S bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de AOC N2041S kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met AOC N2041S . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
