Gebruiksaanwijzing /service van het product BIZHUP C451 van de fabrikant Konica Minolta
Ga naar pagina of 410
User’ s Guide [Print Operations].
Introduction C451 x-1 Introduction Thank you for purchasing this machin e. The bizhub C451 is equipped with an in tegrated printer controller that allows you to print directly from Window s-compati ble compute rs or Macintosh computers.
Introduction C451 x-2 - Apple, Macintosh and Mac OS are re gistered tradema rks of Apple Com- puter, Inc. Safari is a trad emark of Apple Computer, Inc. - Adobe, the Adobe logo, Acrobat and PostScript are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other coun tries.
Introduction C451 x-3 4. The names “OpenSSL Toolkit” and “Ope nSSL Project” must not be used to endorse or promote products derive d from this software without prior written permission. For writ ten pe rmission, please contact openssl- core@openssl.
Introduction C451 x-4 Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the follow ing conditions are met: 1. Redistributions of source code m ust retain the copyrigh t notice, this list of conditions and the foll owing disclaimer.
Introduction C451 x-5 Permission to use, copy, modify and di stribute this software and its docu- mentation for any purpose and without fee is hereby granted, provid ed that the above copyright notice.
Introduction C451 x-6 Part 3: Cambridge Broadband Lt d. copyright notice (BSD) Portions of this code are copyright © 2001-2003, Cambri dge Broadband Ltd.
Introduction C451 x-7 - Neither the name of the Sun Microsyst ems, Inc. nor the names of its con- tributors may be used to endorse or promote pr oducts derived from this software without specific prior written permission.
Introduction C451 x-8 Copyright © 2004, Cisco, Inc and In formation Network Center of Beijin g Uni- versity of Posts and Telecommuni cations. All rights reserved.
Introduction C451 x-9 SOFTWARE LICENSE AGREEMENT This package cont ains the following materia ls provided by Konica Minolta Business Technologies, Inc.
Introduction C451 x-10 9. You may not rent, lease, sublicense , le nd or transfer versions or copies of the Software Li censee does not u se, or Software conta ined on any un- used media, ex cept as part of the pe rmanent transfer of all Softw are and Documentation as described above.
Introduction C451 x-11 About Adobe Color Profile ADOBE SYSTEMS INCORPORATED COLOR PROFILE LICE NSE AGREEMENT NOTICE TO USER: PLEASE READ THIS CONTRACT CAREFULLY. BY US- ING ALL OR AN Y PORTION OF THE SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE YOU A CCEPT ALL THE TERMS AND CONDITIONS OF THIS AG REEMENT.
Introduction C451 x-12 Software for any particular purpose or to produce any particular result. Adobe shall not be liable for loss or damage arising out of this Agreement or from the distribution or use of the Software or any other materials.
Introduction C451 x-13 8. GOVERNMENT REGULATIONS If any part of the Software is identif ied as an export controlled item under the Un ited States Export Administration Act or any other export law, res.
Introduction C451 x-14 ICC Profile for TOYO INK Stan dard Color on Coated paper (TOYO Offs et Coat ed 2.0) This ICC Profile (TOYO Offset Coated 2.0) cha racterizes Japanese of fset press on Coated paper and is fully compatible with ICC profile format.
Introduction C451 x-15 DIC STANDARD COLOR PROF ILE LICENSE AGREEMENT IMPORTANT: PLEASE READ THIS STANDARD COLOR PROFILE LICENSE AGREEMENT (“LICENSE AGRE EMENT”) CAREFULLY BEFORE USING THE DIC STANDARD COLOR PROFILE, INCLUDING THE DIC STANDARD COLOR SFC1.
Introduction C451 x-16 vided, however, that, notwithsta nding anything contrary conta ined here- in, you may not use the Profil e on any network system or share, install or use the Profile concurrently on diffe rent computers, or electron ically transfer the Profile from one comput er to another or over a network.
Introduction C451 x-17 USE, THE PROFILE AND BASED ON ANY THEORY OF LIABILITY IN- CLUDING BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE ), PRODUCT LIABILITY OR OTHERWISE, EVEN IF D IC OR ITS R EPRESENTATIVES HA VE BEEN ADVI SED OF THE POSSIBILITY OF SUCH DAMAGES.
Introduction C451 x-18 Contents Introduction NetSNMP License ............. ......... ........... ........ ......... ........... ........ ..... x-4 Copyright ........... ........ ........ ............ ........ ........ ............ ........ ........ ..
Introduction C451 x-19 When using Web service printing und er Windows Vista ......... ..... 2-13 For Windows 2000/NT 4.0 . .......................................... ............ ..... 2-16 Installing the pri nter driver using Plug and Play ........ .
Introduction C451 x-20 3.7 IPP printing (Windows 2000/XP/Server 200 3/Vista) .... ............ ..... 3-14 Operations on this machine ........ ........ ........... ......... ........... ........ ... 3-14 Installing the pri nter driver (Windo ws 2000/XP /Server 2003) .
Introduction C451 x-21 Image Shift ................... ........ ........... ......... ........ ......... ........... ........ 4-17 Stapling and hole punching ........... ........... ........ ......... ........... ........ 4-18 Center Staple a nd Fold/Fold .
Introduction C451 x-22 5.3 Specifying t he Layout tab settings ............ ........... ........ ............ ..... 5-18 Printing multiple pages on one page (N in 1, Poster M ode) ......... 5-18 Chapters ......... ........ ......... ........... ......
Introduction C451 x-23 5.11 Saving the d river settin gs .... ......... ........ ........... ......... ........ ........... ... 5-51 Saving the drive r settings ................ ......... ........... ........ ............ ..... 5-51 Recalling the settings .
Introduction C451 x-24 6.5 Specifying t he Cover Mode ta b settings ................. ........ ........... ... 6-26 Printing documents with a front co ver/back cover ................. ..... 6-26 Printing multiple page s ............ ........ .........
Introduction C451 x-25 7.3 Printing . ........ ........... ......... ........ ......... ........ ........ ............ ........ ........ ..... 7-8 General (basic settings) ........ ........... ......... ........ ........... ......... ........ .. 7-8 Layout (printing multiple pages on one page) .
Introduction C451 x-26 8.12 Saving the d river settin gs .... ......... ........ ........... ......... ........ ........... ... 8-43 Saving the drive r settings ................ ......... ........... ........ ............ ..... 8-43 Recalling the settings .
Introduction C451 x-27 9.3 Print job management ......... ......... ........ ........... ......... ........ ........... ... 9-47 Specifying job operations ..... ......... ........... ........ ......... ........ ........ ... 9-47 Specifying settings (for W indows) .
Introduction C451 x-28 11.3 Font list ........ ......... ........ ........ ............ ........ ........ ......... ........... ........ ... 11-4 PCL font list ............ ........... ......... ........ ........... ......... ........... ........ ... 11-4 PS font list .
Introduction C451 x-29 About this user’s guide This User’s Guide co ntains information for u sing the printing functions of t he Konica Minolta printer controller. For de tails on the copy functions, scanning functions, box functions, and f ax functions, refer to the respective User’s Guide.
Introduction C451 x-30 User’s Guide [Box Operations] This manual contain s operating procedures f or using the user box es on the hard disk. Refer to this manual for detail s on saving data in user boxes, re- trieving data from user boxes and transferring data.
Introduction C451 x-31 Notations Screen images in this user’s guide Unless stated otherwise, the printer dri ver functions are de scribed using the printer driver for Windows XP.
Introduction C451 x-32.
Overview 1 C451 1-1 1O v e r v i e w 1.1 Printer controller The printer controller is a device for performing printing functions and net- work printing function s with this machine. Role of the printer controller The printer controller is built into the machine.
Overview 1 C451 1-2 2 Note To perform fax oper ations, optional fax kit FK-502 is required. ! Detail For details on the PC-fax transmission, refer to th e User’s Guide [Fax Driver Ope rations].
Overview 1 C451 1-3 Machine modes The printer driver setti ngs are mainly set using a computer, however, the fon t list can be printed, and the printer co ntroller settings and default print set- tings can be set using t he control panel of this machine.
Overview 1 C451 1-4 Printing flow When using this printing system as a pri nter, the flow of the main process is described below. Print commands transmitted from the appli cation are received by the printer driver.
Overview 1 C451 1-5 1.2 Operating environment The system requirements for using this printing system an d the interfaces used for connection are explained below. Compatible comp uters and operating systems Check that the computer being connect ed meets the following c onditions.
Overview 1 C451 1-6 Macintosh Item Operating environment Operating System Mac OS 9.2, Ma c OS X 10.2.8, Mac OS X 10.3, or Mac OS X 10.4 Processor PowerPC, Intel Proces sor (Intel Proces sor for Mac OS X 10.
Overview 1 C451 1-7 Compatible interfaces The various interfaces that can be used to connect this printing system to a computer are described below. Ethernet interface Connect when using this printing syste m as a network printer. Supports 10Base-T, 100Base-TX and 100 0Base-T standards.
Overview 1 C451 1-8 Connection di agram The printer ca bles can be connected to each port at the back of this ma - chine. Machine (rear view) Ethernet port (10Base-T / 100Base-TX / 1000Base-T) USB po .
Overview 1 C451 1-9 1.3 Setting up the system In order to use this printing system, it must first be set up. Setup consists of connecting thi s machine to a computer and instal ling the printer driver onto th e computer being used. To set up the printing system Setup of the printing syst em as described below.
Overview 1 C451 1-10 2 Note To update an existing printer driver, de lete the existing printer driver first. For details, refer to “Uninstalling the printer driver” on page 2-21 and page 2-29. As necessary, set the inte rface timeout settings in the Utility mode on the control panel.
Installing the printer driver 2 C451 2-1 2 Installing the printer driver 2.1 Printer drivers and su pported operating systems In order to use this printing system, the printer driver must be installed. The printer driver is a program that controls the processing of data for output.
Installing the printer driver 2 C451 2-2 ! Detail For details on the fax driv er, refe r to the User’s Gu ide [Fax Driver Opera - tions]..
Installing the printer driver 2 C451 2-3 2.2 When used with Windows The installation procedure for the Wi ndows p rinter driver differs depending on how this machine is connected to the computer and depending on which printer driver is used. The installation method also differs depending on the version of Windows that you are using.
Installing the printer driver 2 C451 2-4 Automatic installation usi ng the installer With the installer, this machine is de tected to determine whether it is con- n e c t e d b y U S B o r i s o n t h e s a m e T C P / IP network as the computer, and then the required printer is automa tically instal led.
Installing the printer driver 2 C451 2-5 To install t he printer d river 1 Insert the printer driver CD-ROM into the computer’s CD-ROM drive. – Check that the installe r starts up, and then continue wi th step 2. – If the inst aller does not start u p, open the prin ter driver folder on the CD-ROM, double-cli ck “Setup.
Installing the printer driver 2 C451 2-6 5 Select this machine, and the n click the [Next] button. – If the co nnection of t his machine cannot be recognized, th e ma- chine will not be listed. When this occurs, select “Specify the Print- er/MFP Except for the Above.
Installing the printer driver 2 C451 2-7 – If not changing the settings, skip to step 8. 7 Select the components to be install ed, and then click the [OK] button. – For details on the fax driver, refer to the User’s Guide [Fax Driver Operations].
Installing the printer driver 2 C451 2-8 Installing the printer dr iver using the Add Printer Wizard For details on installing th e printer driver in a network environment, r efer to “Setting up network printing” on page 3-1.
Installing the printer driver 2 C451 2-9 5 Select “Local printer attache d to this c omputer”, and then click the [Next] b utton. – Clear the “Autom atically dete ct and install my Plug and Play print - er” check box. 6 The Select a Printer Port dialog box appears.
Installing the printer driver 2 C451 2-10 10 Click the [OK] button. The “Printers” list a ppears. 11 Click the [Next] button. 12 Follow the on-screen instructions. – When the Digital Sign ature dialog box appears, c lick the [Continue Anyway] button.
Installing the printer driver 2 C451 2-11 4 Click “Add a printer” on the toolbar. The “Add Printer” dialog box appears. 5 Click “Add a local printer”. – For details on installing the printer driver in a network environment, refer to “Setting up network prin ting” on page 3-1.
Installing the printer driver 2 C451 2-12 6 Select “LPT1: (Printer P ort)” from “U se an existing port”, and then click the [Next] button. 7 Click the [Have Disk] button. 8 Click the [Browse] button. 9 Specify the desir ed folder on the CD-ROM that con tains the printe r driver, an d then click the [OK] b utton.
Installing the printer driver 2 C451 2-13 11 Select the printer to be installed, and then click the [Next] button. 12 Follow the on-screen instructions. – If the User Account Control dialog box appears, click th e [Continue] button. – If the Windows Security dialog box a ppears, click “Install this driver software anyway”.
Installing the printer driver 2 C451 2-14 ! Detail Be sure to specify the IP address from TCP/IP Settings on this machine. For the setting procedure, refer to “ S etting the IP address for this ma- chine” on page 3-4. If using Web service prin ting, be sure to enable the print function from Web Service Settings on this machine.
Installing the printer driver 2 C451 2-15 8 Click the [Browse] button. 9 Specify the desir ed folder on the CD-ROM that con tains the printe r driver, and then click the [Open] button. Select the sp ecified folder accordin g to the printer driver to be used, the operating system, and the language.
Installing the printer driver 2 C451 2-16 For Windows 2000/NT 4.0 1 Insert the printer driver CD-ROM into the computer’s CD-ROM drive. 2 Click the [Start] button, point to “Settings”, and then click “Printers”. The Printers window appears. 3 Double-click the “A dd Printer” icon.
Installing the printer driver 2 C451 2-17 10 Click the [OK] button. The “Printers” list a ppears. 11 Click the [Next] button. 12 If the screen for specifyin g the port appears, selec t “LPT1” here. 13 Follow the on-screen instructions. – When the Digital Signature dialog box appe ars, click the [Yes] but- ton.
Installing the printer driver 2 C451 2-18 Installing the printer driver using Plug and P lay For Windows 2000 1 After usin g a USB cable to connect this mach ine to a comp uter, turn on the computer. – Do not disconnect or connect the ca ble while the computer is start- ing up.
Installing the printer driver 2 C451 2-19 For Windows XP/Server 2003 1 After usin g a USB cable to connect this mach ine to a comp uter, turn the computer on. – Do not disconnect or connect the ca ble while the computer is start- ing up. 2 Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
Installing the printer driver 2 C451 2-20 For Windows Vista 1 After usin g a USB cable to connect this mach ine to a comp uter, turn the computer on. – Do not disconnect or connect the ca ble while the computer is start- ing up. 2 Turn the main power of this machine on.
Installing the printer driver 2 C451 2-21 9 Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. Uninstalling the printer drive r If it becomes necessary to delete the printer driver, for example, when you want to reinstall the printer driver, fo llow the procedure below to delete the driver.
Installing the printer driver 2 C451 2-22 When the printer driver does not contain the delete function If the printer driver was not installed with an installer, the delete function of the printer dri ver is not i ncluded. 1 For Windows 2000/NT 4.0, click the [Start] button, point to “Settings”, and then click “Printers”.
Installing the printer driver 2 C451 2-23 8 Select “Remove driver and driver pack age” from the deletion confirma- tion dialog box, and then click the [OK] button.
Installing the printer driver 2 C451 2-24 2.3 When used wit h Macintosh The installation procedure for the Macintosh printer dri ver differs depending on the Mac OS version and printer drive r be ing used. Refer to the tabl e below for the appropriate procedure for instal ling the printer driver on your Macin- tosh computer.
Installing the printer driver 2 C451 2-25 7 In the Easy Install dialog box, click the [Install] button. – From the second time the print er driver is installed and thereaf ter, the [Install] button may appe ar as the [Upgrade] button. The printer driver is ins talled onto the Macint osh compute r.
Installing the printer driver 2 C451 2-26 3 If this machine appears as a printe r with a Bonjour conne ction, select “KONICA MINOLTA” from the “Print Using” drop-down list, select “KONICA MINOLTA C451 PS” in the mode l list, and then click the [Add] button.
Installing the printer driver 2 C451 2-27 – When “IPP” is selected as the protoc o l in IP Printer, the text box for entering th e queue na me appe ars. For Mac OS 10.3, l eave the queue name text box empty. For Mac OS 10.4, enter “ ipp” in the queue name text box .
Installing the printer driver 2 C451 2-28 5 Make sure that “Apple Talk” is set to “Ac tive”, and then cli ck the [Laser- Write r] icon . 6 From the “Select a PostScript Printer” list, click the applicabl e printer for the printing system, and then click the [Create] button.
Installing the printer driver 2 C451 2-29 9 Click the [OK] button. The Chooser window appears again. 10 Close the Chooser window. Uninstalling the printer drive r If it becomes necessary to delete the printer driver, for example, when you want to reinstall the printer driver, fo llow the procedure below to delete the driver.
Installing the printer driver 2 C451 2-30 For Mac OS 9.2 1 Drag PPD file “KONICAMINOLTAC451U Vxxx.ppd”, which is located in “System Folder” – “Extensions” – “Pri nter Descriptions” of “Hard Disk”, to the “Trash” icon. The related printer driv er files are deleted.
Setting up network printing 3 C451 3-1 3 Setting up network printing 3.1 Overview of ne twork functions Network functions By connecting this machi ne to a netw ork through the Ethernet port, this printing system can be used as a network p rinter. This printing system supports 10Bas e-T, 100Base-TX and 1000Base-T standards.
Setting up network printing 3 C451 3-2 Features of the network functions This printing system is equipped with the f ollowing network functions to fle x- ibly support various network environments.
Setting up network printing 3 C451 3-3 Network connection methods that can be selected in each Windows op- erating system This chapter describes the settings that must be specified for network print- ing. Setting procedures differ depending on the method of networking pri nting used (SMB, LPR, or IPP printin g).
Setting up network printing 3 C451 3-4 3.2 Setting the IP address for this machine Use this machine’s control panel to a ssign an IP address to this machine. 2 Reminder When specifying network settings, fo llow the instructions of the network administrator.
Setting up network printing 3 C451 3-5 5 Touch [Manual Input] under “IP Application Method”. 6 Specify setti ngs for the following: – IP Address: Specify the IP address of this machine. – Subnet Mask: Specify the subnet mask for the network to which you are connecting.
Setting up network printing 3 C451 3-6 ! Detail Although the method for entering a static IP address without using the DHCP server is described in the proced ure here, it is also possible to au- tomatically assign the IP address from the DHCP server.
Setting up network printing 3 C451 3-7 3.3 Accessing PageSc ope Web Connection Setting the IP address for this mach ine enables yo u to access PageScope Web Conn ection. With PageScope Web Connect ion, you can change the network settings of this machine from a compute r.
Setting up network printing 3 C451 3-8 3.4 SMB printing You can use SMB printing (Windows printi n g) to print direct ly over the Micro- soft network from computers running Windows. Operations on this machine Set the IP address fo r this machine. For the setting procedu re, refer to “Set- ting the IP address for this machine” on page 3-4.
Setting up network printing 3 C451 3-9 5 To apply the settings, restart this machine (turn the main power off, then on aga in). 2 Reminder When turning the power off, then on again , wait at le ast 10 seconds be- fore turning the power on again; othe rwise, this machine may not function properly.
Setting up network printing 3 C451 3-10 3.5 LPR prin ting The LPR print service is supported as standard in Windows 2000, Windows XP, Windows NT 4.0, Windows Server 2003, an d Windows Vista. TCP/IP is used as the network protocol. Operations on this machine Set the IP address fo r this machine.
Setting up network printing 3 C451 3-11 9 Click the [Next] button, and then clic k th e [Finish] button t o apply th e setting. For Windows NT 4.0 1 Click the [Start] button, point to “Settings”, and then click “Printers”. 2 Right-click the icon of the installed printer, and then click “Properties”.
Setting up network printing 3 C451 3-12 3.6 Port 9100 printing (W indows 2000/XP/Server 2003/ Vista) The Port 9100 print service is supported as standard in Win dows 2000, Win- dows XP, Windows Server 2003, and Wind ows Vista. TCP/IP is used as the network protocol.
Setting up network printing 3 C451 3-13 9 Click the [Next] button, and then clic k th e [Finish] button t o apply th e setting. 2 Note If the RAW port is not specified to be used in the TCP/ IP setting, prin ting cannot be performed. To specify the RA W port settings, refer to User's Guide [PageScope Web Connection Ope rations].
Setting up network printing 3 C451 3-14 3.7 IPP printing (Windows 2000/XP/Server 2003/Vista) The IPP (Internet Printing Protocol) prin t service is supported as standar d in Windows 2000, Win dows XP, Windows Server 2003, and Windows Vista. TCP/IP is used as the network protocol.
Setting up network printing 3 C451 3-15 4 Touch [ON] under “IPP Settings” and “Accept IPP Jobs”. 5 Touch [Printer Informa tion], and then specify settings f or the following. After specifying the se ttings, tou ch [Clo se]. – Printer Name: Specify the print er name (up to 127 characters).
Setting up network printing 3 C451 3-16 6 Touch [Support Information], and then specify the print operations sup- ported by IPP. After specifyi ng the settings, touch [OK]. 7 Touch [Forward]. 8 Specify settings for the foll owing. Af ter specifying the settin gs, touch [Forward].
Setting up network printing 3 C451 3-17 9 Specify the user name and passw ord. After specifying the set tings, touch [OK]. 10 To apply the settings, restart this machine (turn the main power off, then on aga in).
Setting up network printing 3 C451 3-18 3 For Windows 2000/Server 2003 , double-click the “Add Printer” ic on. For Windows XP, click “Add a printer ” on the “Printer Tasks” menu. The Add Printer Wizard starts up. 4 Click the [Next] button.
Setting up network printing 3 C451 3-19 Installing the printer driver (Windows Vista) 1 Insert the printer driver CD-ROM into the computer's CD-ROM drive. 2 Click the [Start] button, and then click “Control Panel”. 3 Click “Hardware and Sound”, an d then click “Printers”.
Setting up network printing 3 C451 3-20 11 Click the [OK] button. The “Printers” list a ppears. 12 Click the [Next] button. 13 Follow the on-screen instructions.
Setting up network printing 3 C451 3-21 3.8 Printing wi th NetWare The printer controller support s the following environments. Network printing in a NetWare environment For Remote Printer mode with NetWare 4.x bind ery emulation 2 Note Before using bindery emula tion, check that bindery emulati on is compat- ible with the Net Ware server.
Setting up network printing 3 C451 3-22 2 Note The settings can al so be specified from Pa geScope Web Connection. 1 Press the [Utility/Counter] key in this mach ine’s control panel, tou ch [Administrator Settings], and then enter the administrator password.
Setting up network printing 3 C451 3-23 4 In the NetWare Setti ngs scre en, tou ch [Net Ware Pri nt Set tings], a nd then specify settings for the following. – NetWare Print Settings: Select [ON]. – NetWare Print Mode: Select [Nprinter/Rprinter]. 5 Specify settings for the foll owing.
Setting up network printing 3 C451 3-24 7 In the NetWare Settings screen, touch [User Authen tication Setting (NDS)], and then specify settings for the following. After specifying the settings, touch [Close]. – User Authentication Settin g (NDS): Select [ON].
Setting up network printing 3 C451 3-25 3 From the “Availa ble Options” list, select “Quick Setup”, and then cli ck the [Enter] button. 4 Enter the appropriate names in the “P rinter Server .
Setting up network printing 3 C451 3-26 3 Touch [IPX Settings], and then specify settings for the following. After specifying the settings, touch [Close]. – IPX Setting: Select [ON]. – Etherne t Frame Type: Select “Auto De tect”. (Selec t the frame type according to the network environment.
Setting up network printing 3 C451 3-27 5 Specify settings for the foll owing. Af ter specifying the settin gs, touch [Forward]. – Print Server Name: Specify the print server name created with Pconsole. – Print Server Password: Spec ify only when setting from the NetWare server.
Setting up network printing 3 C451 3-28 8 In the NetWare Settings screen, touch [User Authen tication Setting (NDS)], and then specify settings for the following. After specifying the settings, touch [Close]. – User Authentication Settin g (NDS): Select [ON].
Setting up network printing 3 C451 3-29 4 Enter the appropriate names in the “P rinter Server Name”, “Printer Name”, “Print Queue Name”, and “P rint Queue Volume” fields, select “Other/Unkn own” from the “Printe r type” field, and then save the spec- ified settings.
Setting up network printing 3 C451 3-30 3 Touch [IPX Settings], and then specify settings for the following. After specifying the settings, touch [Close]. – IPX Setting: Select [ON]. – Etherne t Frame Type: Select “Auto De tect”. (Selec t the frame type according to the network environment.
Setting up network printing 3 C451 3-31 5 Specify settings for the foll owing. Af ter specifying the settin gs, touch [Close]. – Print Server Name: Specif y the Print Server Name. – Printer Number : Specify the printer number (0 to 254), or sel ect [Au- to].
Setting up network printing 3 C451 3-32 11 Use the NetWare se rver console to display the print server screen, and then check tha t “C451” (created printe r) is shown as “Waiting for Job” for the co nnected prin ter (0).
Setting up network printing 3 C451 3-33 1 Press the [Utility/Counter] key in this mach ine’s control panel, tou ch [Administrator Settings], and then enter the administrator password. – The administrator password is required to enter Administrator mode.
Setting up network printing 3 C451 3-34 4 In the NetWare Setti ngs scre en, tou ch [Net Ware Pri nt Set tings], a nd then specify settings for the followin g. After the NetWare print mode is selected, the screen switches automatically. – NetWare Print Settings: Select [ON].
Setting up network printing 3 C451 3-35 6 Specify settings for the foll owing. Af ter specifying the settin gs, touch [Close]. – File Server Name: Spe cify the name of the file server that conne cts to the PServer. – NDS Context Name: Specify the name of the context that connects to the PServer.
Setting up network printing 3 C451 3-36 11 Use the NetWare server con sole to load MONITOR.NLM. 12 Select the connec tion information and, in the active connection col- umn, check that the created PServe r is connected.
Setting up network printing 3 C451 3-37 9 In “Connection type”, select “Remote (LPR on IP)”, and then register i t. 10 Enter the IP address set for this ma chine as the host address, enter “Print” as the printer name, a nd then click t he [Finish] button to register the settings.
Setting up network printing 3 C451 3-38 – Printer drivers that ca n be selected: Windows 2000/XP/Server 2003/Vista: PCL dri ver, PS driver Windows NT 4.
Setting up network printing 3 C451 3-39 3.9 Printing wi th Macintosh This section describes this machine’ s settings and the Macintosh network settings. Specify the printer n etwork port sett ings after installing th e printer driver and when selectin g a printer.
Setting up network printing 3 C451 3-40 3 Specify settings for the foll owing. Af ter specifying the settin gs, touch [OK]. – AppleTalk Setting: Select [ON]. – Printer Name: Specify the print er name (up to 31 characters). – Zone Name: Specify the zone be ing connected to (up to 31 charac- ters).
Setting up network printing 3 C451 3-41 2 Touch [Network Settings], th en [Bonjour Setting]. 3 Specify settings for the foll owing. Af ter specifying the settin gs, touch [OK]. – Bonjour Setting: Select [ON]. – Bonjour Name: Specify the Bonjour name that is to appear as the connected device name (up to 63 characters).
Setting up network printing 3 C451 3-42 For Mac OS X 1 On the Apple menu, select “System Preferences”. 2 Click the “Network” icon. 3 From “Show”, select “Built-in Ethernet”.
Various printing methods 4 C451 4-1 4 Various printing methods 4.1 Printing operations For Windows Print jobs are specified from the application software. 1 Open the data in the a pplication, click [File], and then click [Print]. 2 Check that the printe r na me has been selected in “Printer Name” or “Select Printer”.
Various printing methods 4 C451 4-2 – If the changed settings are not saved in the Print dialog box, the original settings are restored whe n the application is quit.
Various printing methods 4 C451 4-3 For Macintosh Printing is possible when the printer dr iver is insta lled and the ne twork set- tings have been specified. Print jobs are specified from the application soft- ware. For Mac OS X 1 Open the data in the a pplication, click [File], and then click “Print”.
Various printing methods 4 C451 4-4 For Mac OS 9.2 1 Open the data in the a pplication, click [File], and then click “Print”. 2 Check that the printe r na me has been selected. 3 Select “General”. 4 Specify the print range and th e numbe r of copies to print, and then click the [Print] button.
Various printing methods 4 C451 4-5 4.2 Setting the printing functions The functions of this machine such as sorting and folding can be set when printing from a com puter. Depending on the operating system running on the connected computer, the setti ng procedure of this machine’s functions may differ.
Various printing methods 4 C451 4-6 Offset When printing multiple copies, shifts the output position of ea ch set. oo o o Combination/ Poster Mo de Specifies whether to print multiple pages of text on one page with N in 1 printing, or print one sheet of an original document divided on multiple pages with Poster Mode printing.
Various printing methods 4 C451 4-7 Copy Protect Prints a special pa ttern to prevent copying. oo o Date/Time Prints the date and time. oo o Page Number Prints the page number. oo o Header/Footer Prints a header and a fo oter. oo o Select Color Selects color printing and mono- chrome printin g.
Various printing methods 4 C451 4-8 Function overview An overview of each functi on is summarized in this section. Original O rientation You can specify “Portrai t” or “Landscape” as the orientation of the page be- ing printed.
Various printing methods 4 C451 4-9 Original Size and Paper Size You can specify the original document size and the output paper size. By specifying each size, you can specif y the enlargement and reducti on ratio. 2 Note Only the output paper sizes can be specified with the PostScript PPD driver for the Macintosh.
Various printing methods 4 C451 4-10 Zoom (enlargem ent and reductio n) You can specify the enlargement or re duction ratio using numeric values. Operating system Printer driver Refer to Windows Konic.
Various printing methods 4 C451 4-11 Paper Tray (paper source) You can select the paper tray for printing from the “Paper Tray” drop-down list. When changing the paper type, you can select a paper tray according to the desired paper type. Paper Type You can specify the paper type to be p rinted.
Various printing methods 4 C451 4-12 Output Method (job management) You can select output methods such as “Secure Print”, whi ch requires a password to print, or “Save in User Box”, which saves documents in a doc- ument folder.
Various printing methods 4 C451 4-13 Collate and O ffset You can print the compl ete document se ts the specified number of times or each page th e specified number of t imes. By specifying offset, the output positi on can be shifted and output to the front and back for each copy.
Various printing methods 4 C451 4-14 Combination/Poster Mode You can specify whether to print multiple pages of text on one page with N in 1 printing, or print one sheet of an original document divided on multiple pages with Poster Mode printing. N in 1 printing comes i n handy when you want to reduce the number of out- put pages.
Various printing methods 4 C451 4-15 Skip Blank Pages (saving paper) You can specify n ot to print blank pages in the data. Chapters You can specify the page you want to print on the front side when duplex printing or booklet printing.
Various printing methods 4 C451 4-16 Print Type (dup lex printing/b ooklet print ing) You can print onto both sides of a page or in a booklet format (two facing pages or center binding). This comes in handy when you wa nt to bind multi- ple-page documents.
Various printing methods 4 C451 4-17 Image Shift You can specify whethe r to shift the entire print imag e according to the bind- ing margins, then print. You can specify the shift direction and set the values for the print position. For duplex printi ng, the front side an d back side of a page can be spec ified separately.
Various printing methods 4 C451 4-18 Stapling and hole punching Documents ca n be stapled togeth er or holes can be punched into the docu- ment. By specifying the binding margin, you can specify the margin f or stapling or hole punching. 2 Reminder The staple func tion is available only when th e optional fin isher is install ed.
Various printing methods 4 C451 4-19 Center Staple and Fold/Fold You can specify whethe r to fold a printed document in ha lf, or to fold a print- ed document in half and to staple in the center.
Various printing methods 4 C451 4-20 Paper Arrangement When printing a document with duplex printing, you can specify whether to adjust the binding position with “Pri oritize Arranging Papers”, which prints after all the print data is received, or with “Prioritize Productivity”, which prints the data simultaneously as it is received.
Various printing methods 4 C451 4-21 Per Page Setting You can specify to have paper inserted between pages, an d specify the sim- plex or duplex print type and the paper to be printed for each page. Watermark You can print a watermark (text st amp) on the page being printed.
Various printing methods 4 C451 4-22 Overlay You can print an original document on top of overlay data that wa s created separately. Overlay Copy Protect You can print a special pattern on an en tire page while printing. When the pattern on th e printed page is copied, th e characters embedded in the pattern appear to pre vent an illegal copy.
Various printing methods 4 C451 4-23 Date/Time and Page Number You can print the date, time, or page num bers on a docum ent. Header/Footer You can print a header and a footer on a document .
Various printing methods 4 C451 4-24 4.3 Spe cifying t he print er driver basic settings The settings specified for the functions of this machine when printing ca n only be applied while using the applicat ion. When the application is quit, the settings return to their default settings.
Various printing methods 4 C451 4-25 PCL driver PostScript driver.
Various printing methods 4 C451 4-26 2 Note For the settings tha t can be specified w ith each printer driver, refe r to the follo win g: Konica Minolta PCL Driver: “Setti ng up the PCL driver (Wind.
Various printing methods 4 C451 4-27 For Macintosh The functions of this machine that can be used when printing can be spe ci- fied in the Print dialog box or the Page Setup dialog box. The settings can only be applied while using the application . When the ap- plication is quit, the settings re turn to their default settings.
Various printing methods 4 C451 4-28 2 Note For details on the settings that can be specified in the printer driver, refer to “Setting up the PPD drive r (Mac OS X)” on page 8-1. For Mac OS 9.x In the Print dialog b ox, sav e the se ttings by click ing the [Save Setting s] but- ton.
Setting up the PCL driver (Windows) 5 C451 5-1 5 Setting up the PCL driver (Windows) 5.1 Setti ngs Common settings The following describes the common sett ings and buttons that are displayed on all tabs. Button Function OK Click this button to close the dialog box an d apply any settin gs that have been ch anged.
Setting up the PCL driver (Windows) 5 C451 5-2 2 Note To enable any installed options, you must specify the Device Option set- tings. For details, refe r to “Specifying the Configure tab settings” on page 5-44.
Setting up the PCL driver (Windows) 5 C451 5-3 Layout tab Finish tab Cover Mode tab Item Function Combination Prints multiple pages on one page, or prints one sheet of an origi- nal document divided on multiple pages. Details ca n be specified by clicking the [Combination Details] button.
Setting up the PCL driver (Windows) 5 C451 5-4 Stamp/Compos ition tab Quality tab Other tab Transparenc y Interleave Outputs and inserts interleaves when prin ting overhead projector transpare ncies. Interleave Tray Selects the input tray for the tran sparency interleaves.
Setting up the PCL driver (Windows) 5 C451 5-5 Configure tab 2 Note To display the Configure tab in Windows 2000/XP/NT 4.0/Server 2003/ Vista, ri ght-click the icon of the in stalled printer, and then click “Proper- ties”.
Setting up the PCL driver (Windows) 5 C451 5-6 2 Note To display the Settings tab in Wind ows 2000/XP/NT 4.0/Server 2003/Vis- ta, right-click th e icon of th e installe d printer, and then click “Properties”.
Setting up the PCL driver (Windows) 5 C451 5-7 5.2 Specifying the Basic tab settings Printing to su it the paper s ize You can enlarge or reduce documents crea ted when printing to match the output paper size. 1 Click the Basic tab. 2 From the “Original Size” and “Paper Size” drop-down lists, select the desired settings.
Setting up the PCL driver (Windows) 5 C451 5-8 2 Note “12 × 18” paper size i s one size larger t han A3 paper size at 504.8 × 457.2 mm. To print on paper sizes ot her than the standard size s, be sure to set the custom paper sizes in Cust om Size Settings first.
Setting up the PCL driver (Windows) 5 C451 5-9 – Unit: Selec ts the mea surement unit th at specifie s the size. 3 Click the [OK] button. 2 Note For custom sizes that are used often, it comes in hand y if you add them to the paper size list. Add a custom paper size from th e Settings tab.
Setting up the PCL driver (Windows) 5 C451 5-10 Specifying the paper type for a paper tray You can specify the paper type for a paper tray. 1 Click the Basic tab. 2 Click the [Paper Settings for Each Tray] button. The Paper Settings for Each Tray dialog box appears.
Setting up the PCL driver (Windows) 5 C451 5-11 2 Note The current specifie d settings can be checke d in “Device Status”. Click the [Restore Device Status] button to communica te with this ma- chine and r ead the stat us of the settin gs specifie d on this mach ine.
Setting up the PCL driver (Windows) 5 C451 5-12 Secure Print If “Secure Print” was selected, enter the ID and password in the dialog box that appeared. 2 Note The ID and password that are required for “Secure Print” can be prereg- istered by clicking the [User Settings] button under “Output Method”.
Setting up the PCL driver (Windows) 5 C451 5-13 Save in User Box When “Save in User Box” or “Save in User Box an d Print” is selected, specif y the file name to be saved and the box number for the save location in the di- alog box that appears for en tering the file name and box number.
Setting up the PCL driver (Windows) 5 C451 5-14 Proof Print When a print job i s sent, t his machine st ops printing temporarily after part of the document has been printed.
Setting up the PCL driver (Windows) 5 C451 5-15 3 Select “Recipien t User”, and then enter the user name and password. 4 Click the [OK] button. 2 Note If this machine has been set to perm it public user s, the ma chine can b e used without a user name and password.
Setting up the PCL driver (Windows) 5 C451 5-16 Specifying the account track settings If the accou nt track settin gs have bee n specified on this machine, you must enter a department name and pass word.
Setting up the PCL driver (Windows) 5 C451 5-17 4 Click the [OK] button. 2 Note Click the [Ver ify] button to communicat e with this machine and to check whether authentication ca n be performed with the user that was entered. You cannot use thi s function if you are not conn ected to or able to com- municate wit h this machine.
Setting up the PCL driver (Windows) 5 C451 5-18 5.3 Specifying the La yout tab settings Printing multi ple pages on one page (N i n 1, Poster Mode) You can specify whether to print multiple pages of text on one page with N in 1 printing, or print one sheet of an original document divided on multiple pages with Poster Mode printing.
Setting up the PCL driver (Windows) 5 C451 5-19 2 Reminder When printing a job that contains pa ges of different sizes and orienta- tions, images may be missing or over lapping when the document is print- ed. Chapters You can specify the page you want to print on the front side when duplex printing or booklet printing.
Setting up the PCL driver (Windows) 5 C451 5-20 Setting the binding margin Binding margins are added to the document before it is printed. 1 Click the Layout t ab. 2 From the “Binding Position” drop-down list, select the bindin g position. 3 Select the “Bindi ng Margin” check box.
Setting up the PCL driver (Windows) 5 C451 5-21 Shifting imag es The entire print image of a document is shi fted and then printed. You can use this function when you want to adjust th e print position. 1 Click the Layout t ab. 2 Select the “Image Shif t” check box.
Setting up the PCL driver (Windows) 5 C451 5-22 5.4 Specifying the Finish tab settings Stapling Multiple-page documents can be stapled. 2 Reminder The staple func tion is available only when th e optional fin isher is install ed. 1 Click the Finish t ab.
Setting up the PCL driver (Windows) 5 C451 5-23 Specifying the center staple and fold setting You can specify to center st aple and fold a printed docume nt. By specifying the center staple and fold setting, printed documents can be folded in ha lf and stapled.
Setting up the PCL driver (Windows) 5 C451 5-24 Folding You can specify to fold a printed document. 2 Reminder The fold function is available only when optional finishe FS-608 or finisher FS-519 with saddle stitcher is inst alled. 1 Click the Finish t ab.
Setting up the PCL driver (Windows) 5 C451 5-25 5.5 Specifying the Cov er Mode tab settings Printing documents with a front cover/back cover 1 Click the Cover Mode tab. 2 Select the “Front Cover” and “B ack Cover” ch eck boxes. 3 From the “Front Cover” and “Back Cover” drop-down lists, select the desired print settings.
Setting up the PCL driver (Windows) 5 C451 5-26 4 Click the [Edit List] button. The Per Page Settings – Edit List di alog box for spec ifying the prin t set- tings appears. 5 Click the [Add] button. A new row for specifying the print se ttings is added to “Settings List”.
Setting up the PCL driver (Windows) 5 C451 5-27 Printing with transparency interleaves If “Transparency” is selected as the paper type, you can select the “Trans- parency Interleave” c heck box to enable the transparency interlea ve setting.
Setting up the PCL driver (Windows) 5 C451 5-28 5.6 Specifying the Sta mp/Composition tab settings Printing a watermark You can print specific text in the background as a watermark. 1 Click the Stamp/Composition tab. 2 Select the “Watermark” check box.
Setting up the PCL driver (Windows) 5 C451 5-29 2 Select the “Watermark” check box. 3 Click the [Edit] button under “Watermark”. The Edit Watermark dialog box appears. 4 To create a watermark, click the [Add] button. To change a watermark, select the watermark from th e “Current Wa- termark” list.
Setting up the PCL driver (Windows) 5 C451 5-30 6 Click the [OK] button. 2 Note Up to 30 watermarks can be registered with the shared setting, and up to 20 watermarks can be register ed with the private setting. Only the administrator can select a s etting under “Sharing”.
Setting up the PCL driver (Windows) 5 C451 5-31 5 Select the “Print in Overla y” check box . 6 From the list, select the over lay that you want to print. 7 Click the [Edit] button under “Print in Overlay”. The Edit Print In Overlay dial og box appears.
Setting up the PCL driver (Windows) 5 C451 5-32 8 Specify the overlay printin g method. – Pages: Specifies the pages to print. – Overwrite: Spe cifies the sequence for printing the overlay on top of the original document. 9 Click the [OK] button. The Stamp/Composition tab appears again.
Setting up the PCL driver (Windows) 5 C451 5-33 Creating an overlay file 1 Create the overlay file data us ing any application. 2 From the [File] menu, select “Print”. 3 Select this machine in “Print er Name”, and then click the [Properties] button or the [Preferences] button.
Setting up the PCL driver (Windows) 5 C451 5-34 8 Specify the storage location for the overlay file, enter the fi le name in the “File Name” box, and then ente r the overlay name or a comment in the “Overlay Name” text box. 9 Click the [Save] button.
Setting up the PCL driver (Windows) 5 C451 5-35 Registering an overlay file 1 Click the Stamp/Composition tab. 2 Click the [Edit] button under “Print in Overlay”. The Edit Print In Overlay dial og box appears. 3 Click the [Browse Files] button to open the overlay file.
Setting up the PCL driver (Windows) 5 C451 5-36 Printing with c opy protecti on You can print a special pattern on an en tire page while printing. When copying a printed page, the characters emb edded in the patte rn ap- pear to prevent an illegal copy.
Setting up the PCL driver (Windows) 5 C451 5-37 – Serial Number: Embeds the serial number of this machine in a pat- tern. – Distribution Control Number: Emb eds the number of copies in a pattern when printing multiple copi es. By clicking the [Edit] bu tton under “Start Nu mber”, you can sp ecify the start number or the dis- play type.
Setting up the PCL driver (Windows) 5 C451 5-38 Printing the date and page numbers You can print the date and pa ge numbers on a docu ment. 1 Click the Stamp/Composition tab. 2 Select the “Date/Time” or the “Page Number” check box . The “Date/Time” and “Pa ge Number” c heck boxes can be selected at the same time.
Setting up the PCL driver (Windows) 5 C451 5-39 Printing a header and a footer 1 Click the Stamp/Composition tab. 2 Select the “Header/Footer” check box. 3 From the drop-down list, select the Header/Footer setting. – To specify the header and the footer deta ils, continue with step 4.
Setting up the PCL driver (Windows) 5 C451 5-40 5.7 Specifying the Quality tab settings Adjusting the color and quality 1 Click the Quality tab. 2 Specify setti ngs for the following: Select Color Specifies the color for printing. Full Color: Prints in color.
Setting up the PCL driver (Windows) 5 C451 5-41 Font Settings You can replac e the TrueType font s used in Win dows with t he printer fonts of this machine. 1 Click the Quality tab. 2 Click the [Font Settings] button. 3 Specify setti ngs for the following: – Download Font Format: Selects th e TrueType font downloading method.
Setting up the PCL driver (Windows) 5 C451 5-42 2 Note Using the printer fonts will shorten the printing time, however, there may be a difference in t he screen display and the print results.
Setting up the PCL driver (Windows) 5 C451 5-43 5.8 Spe cifying the O ther tab settings 2 Note The “Excel Job Control” setting and the “Remove White Background” setting cannot be used with Window s XP Professional x64 or Windows Server 2003 x64.
Setting up the PCL driver (Windows) 5 C451 5-44 5.9 Specifying the Con figure tab settings Selecting an option The functions of this machi ne can be us ed from the printer driver if the model name, the installed options, a nd the use r authentication and accou nt track functions a re speci fied.
Setting up the PCL driver (Windows) 5 C451 5-45 – For Windows Vista, if the con trol panel i s in the classic view, dou- ble-click “Printers”. 2 Right-click the icon of the installed printer, and then click “Properties”. 3 Click the Configure tab.
Setting up the PCL driver (Windows) 5 C451 5-46 3 Select the desire d tray in “Paper Tray Infor mation”, and then specify the paper size, paper orie ntation, and paper type. 4 Click the [OK] button. 2 Note The paper type for a paper tray can al so be specified from the Basic tab.
Setting up the PCL driver (Windows) 5 C451 5-47 Changing an encryption passph rase You can specify an encryp tion passphrase whe n it is user defined by com- municating wit h this machine . The encryption key is automatically gen erated according to the entered char- acters and it is used to communicate with this mach ine.
Setting up the PCL driver (Windows) 5 C451 5-48 5.10 S pecifying the Settin gs tab settin gs Specifying the default settings You can change the defa ult settings for displaying the con firmation messag- es or the dialog box for entering the authenticati on settings.
Setting up the PCL driver (Windows) 5 C451 5-49 – EMF Spool: When u sing an original sys tem environm ent, select this check box if a met afile (EMF) spool is required. – Display Constrai nt Message: Speci fies whether to display a mes- sage when functions that ca nnot be specified at the same time were enabled from the printer driver.
Setting up the PCL driver (Windows) 5 C451 5-50 The new paper size is added to “List of Custom Size”. 4 Specify the paper name and size. 5 Click the [OK] button. 2 Note Up to 10 custom paper sizes can be registered. Up to 16 characters can be entered in the “Pap er Name” text box.
Setting up the PCL driver (Windows) 5 C451 5-51 5.11 Saving the driver settings You can save the setting values of the cha nged driver and recall them as necessary. Saving the driver setti ngs 1 Change the driver settings from th e Ba sic tab and the Layout tab.
Setting up the PCL driver (Windows) 5 C451 5-52 – Name: Ente rs the specif ied registration name. – Icon: Specifies th e icon. The setti ngs can be registered eve n if the icon is not specified. – Sharing: Specifies whe ther to register the specified fi le as public or private.
Setting up the PCL driver (Windows) 5 C451 5-53 Editing the setting s You can edit the recalled fu nction it ems such as the specified names and comments. 1 In the Printing Pre ferences dialog box, cl ick the [Edi t] button next to the “Favorite Setting” drop-down list.
Setting up the PCL driver (Windows) 5 C451 5-54 2 Note The specified settings of the drive r functi ons cannot be changed. Importing and exporting the driver settings You can also save (export) or read (i mpor t) the settings that were specified t o a f i l e .
Setting up the PostScript driver (Windows) 6 C451 6-1 6 Setting up the PostScript driver (Win- dows) 6.1 Setti ngs Common settings The following describes the common sett ings and buttons that are displayed on all tabs. Button Function OK Click this button to close the dialog box an d apply any settin gs that have been ch anged.
Setting up the PostScript driver (Windows) 6 C451 6-2 2 Note To enable any installed options, you must specify the Device Option set- tings. For details, refe r to “Specifying the Configure tab settings” on page 6-46.
Setting up the PostScript driver (Windows) 6 C451 6-3 Layout tab Finish tab Offset When printing multiple copies, shifts the output posit ion of each set. Paper Settings for Each Tray Specifies the paper ty pe for each paper tray. Item Function Item Function Combination Prints multiple pages on one page.
Setting up the PostScript driver (Windows) 6 C451 6-4 Cover Mode tab Stamp/Compos ition tab Item Function Front Cover Attaches a front cover page. Front Cover Tray Selects the paper tr ay for the front cover . Back Co ver Attaches a back c over pag e.
Setting up the PostScript driver (Windows) 6 C451 6-5 Quality tab Other tab Advanced tab Item Function Select Color Specifies the color for printing. Qualit y Adjustment Adjusts the image qua lity. You can select “Simple” to ad- just entire documents or “Detailed” to adjust the text, pho- tos, and c harts in th e documen t.
Setting up the PostScript driver (Windows) 6 C451 6-6 Device Settings tab 2 Note To display the Device Settings ta b in Windows 2000/XP/S erver 2003/Vis- ta, right-click th e icon of th e installe d printer, and then click “Properties”. Item Function Font Substitution Table Specifies the repl acement of TrueType fonts with printer fonts.
Setting up the PostScript driver (Windows) 6 C451 6-7 Configure tab 2 Note To display the Configure tab in Windows 2000/XP/Server 2003/Vista , right-click the icon of the installed printer, and then click “Properties”.
Setting up the PostScript driver (Windows) 6 C451 6-8 6.2 Specifying the Basic tab settings Printing to su it the paper s i ze You can enlarge or reduce documents crea ted when printing to match the output paper size. 1 Click the Basic tab. 2 From the “Original Size” and “Paper Size” drop-down lists, select the desired settings.
Setting up the PostScript driver (Windows) 6 C451 6-9 2 Note “12 × 18” paper size i s one size larger t han A3 paper size at 504.8 × 457.2 mm. To print on paper sizes ot her than the standard size s, be sure to set the custom paper sizes in Cust om Size Settings first.
Setting up the PostScript driver (Windows) 6 C451 6-10 – Unit: Selec ts the mea surement unit th at specifie s the size. 3 Click the [OK] button. 2 Note If using banner paper, specify the size of the banner paper in Custom Size. For details, refer to “Printin g on banner paper” on page 9-68.
Setting up the PostScript driver (Windows) 6 C451 6-11 Specifying the paper type for a paper tray You can specify the paper type for a paper tray. 1 Click the Basic tab. 2 Click the [Paper Settings for Each Tray] button. The Paper Settings for Each Tray dialog box appears.
Setting up the PostScript driver (Windows) 6 C451 6-12 2 Note The current specifie d settings can be checke d in “Device Status”. Click the [Restore Device Status] button to communica te with this ma- chine and r ead the stat us of the settin gs specifie d on this mach ine.
Setting up the PostScript driver (Windows) 6 C451 6-13 Secure Print If “Secure Print” was selected, enter the ID and password in the dialog box that appeared. 2 Note The ID and password that are required for “Secure Print” can be prereg- istered by clicking the [User Settings] button under “Output Method”.
Setting up the PostScript driver (Windows) 6 C451 6-14 Save in User Box When “Save in User Box” or “Save in User Box an d Print” is selected, specif y the file name to be saved and the box number for the save location in the di- alog box that appears for en tering the file name and box number.
Setting up the PostScript driver (Windows) 6 C451 6-15 Proof Print When a print job i s sent, t his machine st ops printing temporarily after part of the document has been printed.
Setting up the PostScript driver (Windows) 6 C451 6-16 3 Select “Recipien t User”, and then enter the user name and password. 4 Click the [OK] button. 2 Note If this machine has been set to perm it public users, the ma chine can b e used without a user name and password.
Setting up the PostScript driver (Windows) 6 C451 6-17 Specifying the account track settings If the accou nt track settin gs have bee n specified on this machine, you must enter a department name and pass word.
Setting up the PostScript driver (Windows) 6 C451 6-18 2 Note Click the [Ver ify] button to communicat e with this machine and to check whether authentication ca n be performed with the user that was entered. You cannot use thi s function if you are not conn ected to or able to com- municate wit h this machine.
Setting up the PostScript driver (Windows) 6 C451 6-19 6.3 Specifying the La yout tab settings Printing multi p le pages on one page (N i n 1) You can specify to print multiple pages of text on one page with N in 1 print- ing. 1 Click the Layout t ab.
Setting up the PostScript driver (Windows) 6 C451 6-20 2 Reminder When printing a job that contains pa ges of different sizes and orienta- tions, images may be missing or over lapping when the document is print- ed. Chapters You can specify the page you want to print on the front side when duplex printing or booklet printing.
Setting up the PostScript driver (Windows) 6 C451 6-21 Setting the binding margin Binding margins are added to the document before it is printed. 1 Click the Layout t ab. 2 From the “Binding Position” drop-down list, select the bindin g position. 3 Select the “Bindi ng Margin” check box.
Setting up the PostScript driver (Windows) 6 C451 6-22 Shifting imag es The entire print image of a document is shi fted and then printed. You can use this function when you want to adjust th e print position. 1 Click the Layout t ab. 2 Select the “Image Shif t” check box.
Setting up the PostScript driver (Windows) 6 C451 6-23 6.4 Specifying the Finish tab settings Stapling Multiple-page documents can be stapled. 2 Reminder The staple func tion is available only when th e optional fin isher is install ed. 1 Click the Finish t ab.
Setting up the PostScript driver (Windows) 6 C451 6-24 Specifying the center staple and fold setting You can specify to center st aple and fold a printed docume nt. By specifying the center staple and fold setting, printed documents can be folded in half and stapled.
Setting up the PostScript driver (Windows) 6 C451 6-25 Folding You can specify to fold a printed document. 2 Reminder The fold func tion is avai lable only when optional fi nisher FS-608 or finish- er FS-519 with saddle stitcher is install ed. 1 Click the Finish t ab.
Setting up the PostScript driver (Windows) 6 C451 6-26 6.5 Specifying the Cov er Mode tab settings Printing documents with a front cover/back cover 1 Click the Cover Mode tab. 2 Select the “Front Cover” and “B ack Cover” ch eck boxes. 3 From the “Front Cover” and “Back Cover” drop-down lists, select the desired print settings.
Setting up the PostScript driver (Windows) 6 C451 6-27 3 From the “Per Page Setting” dr op -down list, select the desired list name. 4 Click the [Edit List] button. The Per Page Settings – Edit List di alog box for spec ifying the prin t set- tings appears.
Setting up the PostScript driver (Windows) 6 C451 6-28 2 Note To change existing prin t settings, se lect the desired ro w and change the settings. To delete existing print se ttings, select the desired row, and then click the [Delet e] button.
Setting up the PostScript driver (Windows) 6 C451 6-29 6.6 Specifying the Sta mp/Composition tab settings Printing a watermark You can print specific text in the background as a watermark. 1 Click the Stamp/Composition tab. 2 Select the “Watermark” check box.
Setting up the PostScript driver (Windows) 6 C451 6-30 1 Click the Stamp/Composition tab. 2 Select the “Watermark” check box. 3 Click the [Edit] button under “Watermark”. The Edit Watermark dialog box appears. 4 To create a watermark, click the [Add] button.
Setting up the PostScript driver (Windows) 6 C451 6-31 – 1st Page Only: Prints the wate rmark on the first page only. – Repeat: Prin ts several wa termarks on a single page. 6 Click the [OK] button. 2 Note Up to 30 watermarks can be registered with the shared setting, and up to 20 watermarks can be register ed with the private setting.
Setting up the PostScript driver (Windows) 6 C451 6-32 5 Select the “Print in Overla y” check box . 6 From the list, select the over lay that you want to print. 7 Click the [Edit] button under “Print in Overlay”. The Edit Print In Overlay dial og box appears.
Setting up the PostScript driver (Windows) 6 C451 6-33 8 Specify the overlay printin g method. – Pages: Specifies the pages to print. – Overwrite: Spe cifies the sequence for printing the overlay on top of the original document. 9 Click the [OK] button.
Setting up the PostScript driver (Windows) 6 C451 6-34 Creating an overlay file 1 Create the overlay file data us ing any application. 2 From the [File] menu, select “Print”. 3 Select this machine in “Print er Name”, and then click the [Properties] button or the [Preferences] button.
Setting up the PostScript driver (Windows) 6 C451 6-35 8 Specify the storage location for the overlay file, enter the fi le name in the “File Name” box, and then ente r the overlay name or a comment in the “Overlay Name” text box. 9 Click the [Save] button.
Setting up the PostScript driver (Windows) 6 C451 6-36 Registering an overlay file 1 Click the Stamp/Composition tab. 2 Click the [Edit] button under “Print in Overlay”. The Edit Print In Overlay dial og box appears. 3 Click the [Browse Files] button to open the overlay file.
Setting up the PostScript driver (Windows) 6 C451 6-37 Printing with c opy protection You can print a special pattern on an en tire page while printing. When copying a printed page, the characters emb edded in the pattern ap- pear to prevent an illegal copy.
Setting up the PostScript driver (Windows) 6 C451 6-38 – Serial Number: Embeds the serial number of this machine in a pat- tern. – Distribution Control Number: Emb eds the number of copies in a pattern when printing multiple copi es.
Setting up the PostScript driver (Windows) 6 C451 6-39 Printing the date and page numbers You can print the date and pa ge numbers on a docu ment. 1 Click the Stamp/Composition tab. 2 Select the “Date/Time” or the “Page Number” check box . The “Date/Time” and “Pa ge Number” c heck boxes can be selected at the same time.
Setting up the PostScript driver (Windows) 6 C451 6-40 Printing a header and a footer 1 Click the Stamp/Composition tab. 2 Select the “Header/Footer” check box. 3 From the drop-down list, select the Header/Footer setting. – To specify the header and the footer deta ils, continue with step 4.
Setting up the PostScript driver (Windows) 6 C451 6-41 6.7 Specifying the Quality tab settings Adjusting the color and quality 1 Click the Quality tab. 2 Specify setti ngs for the following: Select Color Specifies the color for printing. Full Color: Prints in color.
Setting up the PostScript driver (Windows) 6 C451 6-42 Controlling t he color profile You can add or delete the IC C profile that can be selected when adj usting the details of the image. 1 Click the Quality tab. 2 Click the [Quali ty Adjustment] button .
Setting up the PostScript driver (Windows) 6 C451 6-43 4 Click the tab and select the col or profile type. 5 From the Available Profile list, select the profile to be used, and then click the [Add] button.
Setting up the PostScript driver (Windows) 6 C451 6-44 Font Settings You can replac e the TrueType font s used in Win dows with t he printer fonts of this machine. 1 Click the Quality tab. 2 Click the [Font Settings] button. 3 Specify setti ngs for the following: – Download Font Format: Selects th e TrueType font downloading method.
Setting up the PostScript driver (Windows) 6 C451 6-45 6.8 Spe cifying the O t her tab settings 2 Note The “Exce l Job Control ”setti ng cannot b e used w ith Window s XP Pro- fessional x64 or Windows Server 2003 x6 4.
Setting up the PostScript driver (Windows) 6 C451 6-46 6.9 Specifying the Con figure tab settings Selecting an option The functions of this machi ne can be us ed from the printer driver if the model name, the installed options, and the user a uthentication an d account track functions a re speci fied.
Setting up the PostScript driver (Windows) 6 C451 6-47 – If “Printe rs and Faxes” does not appear in the Start me nu in Win- dows XP/Server 2003, open the Co ntrol Panel from the Start menu, select “Printers and Other Hardware ”, and then select “Printers and Faxes”.
Setting up the PostScript driver (Windows) 6 C451 6-48 Specifying the paper tray You can register the paper size, paper or ientation, and paper type for the pa- per that is loaded in a paper tray.
Setting up the PostScript driver (Windows) 6 C451 6-49 Changing an encryption passph rase You can specify an encryp tion passphrase whe n it is user defined by com- municating wit h this machine . The encryption key is automatically gen erated according to the entered char- acters and it is used to communicate with this mach ine.
Setting up the PostScript driver (Windows) 6 C451 6-50 6.10 S pecifying the Settin gs tab settin gs Specifying the default settings You can change the defa ult settings for displaying the con firmation messag- es or the dialog box for entering the authenticati on settings.
Setting up the PostScript driver (Windows) 6 C451 6-51 4 Specify setti ngs for the following: – Display Constrai nt Message: Speci fies whether to display a mes- sage when functions that ca nnot be specified at the same time were enabled from the printer driver.
Setting up the PostScript driver (Windows) 6 C451 6-52 6.11 Saving the driver settings You can save the setting values of the cha nged driver and recall them as necessary. Saving the driver setti ngs 1 Change the driver settings from th e Ba sic tab and the Layout tab.
Setting up the PostScript driver (Windows) 6 C451 6-53 3 Specify setti ngs for the following: – Name: Ente rs the specif ied registration name. – Icon: Specifies th e icon. The setti ngs can be registered eve n if the icon is not specified. – Sharing: Specifies whe ther to register the specified fi le as public or private.
Setting up the PostScript driver (Windows) 6 C451 6-54 Recalling the settings You can select the settings to recall from the “Favorite Setting” drop-down list on the Printin g Preferences dialog box. The setting values are recal led, and the settings for the printer driver are changed.
Setting up the PostScript driver (Windows) 6 C451 6-55 3 Click the [Option] button, select the check box of the function that you want to recall, and the n click the [OK] button. 4 Click the [OK] button. 2 Note The specified settings of the drive r functi ons cannot be changed.
Setting up the PostScript driver (Windows) 6 C451 6-56 Importing and exporting the driver settings You can also save (export) or read (i mpor t ) the settings that were specified t o a f i l e . T h i s c o m e s i n h a n d y w h e n y o u w a n t t o u s e t h e s a m e s e t t i n g s o n a n - other co mputer.
Setting up the PostScript driver (Windows) 6 C451 6-57 2 Note To read the specified fil e that was saved in the “Favorite Setting” drop- down list, click the [Import] button and specify the file.
Setting up the PostScript driver (Windows) 6 C451 6-58.
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-1 7 Setting up the PPD driver (Mac OS 9.2) 7.1 Setti ngs The functions of this machine can be specified on the Page Setup and Print dialog boxes displayed from an application. The settings can only be applied while using the application .
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-2 2 Note Depending on the application, “Page Setup” may be displayed as “Paper Setup”. In addition, you may have to select “Paper Setup” – “Options” from the “File” menu. The dialog boxes differ depe nding on the application.
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-3 Color Matching Print Color Specifies the color for printing. Intent Selects the matching method. Printer Profi le Specifies the col or adjustment profile of the output device. Background Printing Print in Specifies background printing.
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-4 2 Note The dialog boxes differ depe nding on the application. Finishing Op- tions 2 Fold Performs folding. Front Cover Attaches a front cover page. Front Cover Tray Selects the paper tray for the front cover .
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-5 7.2 Page Setup Page Attributes (basic setting s) 1 Select “Page Se tup” or “Pap er Setup” from the [File] menu . 2 Select “Page Attributes”. 3 Specify setti ngs for the following: – Paper: Specifies the paper size.
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-6 Custom Page Sizes 1 Select “Page Se tup” or “Pap er Setup” from the [File] menu . 2 Select “Custom Page Sizes”. 3 Click the [New] button. 4 Specify setti ngs for the following: – Paper Size: Specifies the paper size.
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-7 PostScript Options 1 Select “Page Se tup” or “Pap er Setup” from the [File] menu . 2 Select “PostScript Options”. 3 Specify setti ngs for the following: – Visual Ef fects: Provides “Flip Horizo ntal”, “Flip Vertical ”, and “In vert Image” (neg ative image).
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-8 7.3 Printing General (basic set tings) 1 From the [File] menu, select “Print”. 2 Select “General”. 3 Specify setti ngs for the following: – Copies: Specifies the numbe r of copies to print. – Collated: Prints multiple copies in sets.
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-9 Layout (printing multiple pag es on one page) You can specify to print multiple pages on one page. 1 From the [File] menu, select “Print”. 2 Select “Layout”. 3 Specify setti ngs for the following: – Pages per sheet: Specifies th e number of pages to print on one page.
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-10 Printer specific opti ons (Finishing Op tions 1 to 4) You can specify printer-specific options. You can specify these options when using the staple or hol e punch functions of thi s machine. 1 From the [File] menu, select “Print”.
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-11 – Smoothing (Graphic): Adjusts the smoothing process of a chart and graph in a document to the text or photo settings. 2 Reminder The staple func tion is available only when th e optional fin isher is install ed.
Setting up the PPD driver (Mac OS 9.2) 7 C451 7-12 7.4 Setting options You can specify the options installed on this ma chine so that they can be used from the printer driver. 2 Reminder If the installed options on this mach ine are not set from “Installable Op- tions”, the option f unction cannot be used with the printer driver.
Setting up the PPD driver (Mac OS X) 8 C451 8-1 8 Setting up the PPD driver (Mac OS X) 8.1 Setti ngs The functions of this machine can be specified on the Page Setup and Print dialog boxes recalled fr om the app l ication. The settings can only be applied while using the application .
Setting up the PPD driver (Mac OS X) 8 C451 8-2 2 Note Depending on the application, “Page Setup” may be displayed as “Paper Setup”. In addition, you may have to select “Paper Setup” – “Options” from the “File” menu. The dialog boxes differ depe nding on the application.
Setting up the PPD driver (Mac OS X) 8 C451 8-3 Paper Handling *1 Reverse P age Order (Page Order) Prints pages in the rever s e order. Print Selects the pag es for printing. Destination paper size *3 Specifies the outp ut paper size. ColorSync *1 Color Conversion Specifies the color conversion method.
Setting up the PPD driver (Mac OS X) 8 C451 8-4 2 Note The dialog boxes differ depe nding on the application. The items indicated by *1 a re displa yed only in Mac OS 10.3 and Mac OS 10.4. The items indica ted by *2 are di splayed only in Mac OS 10.3.
Setting up the PPD driver (Mac OS X) 8 C451 8-5 Common settings in the Print dialog box The following describes th e common settings that are displayed by the spe- cific operations (Output Method, Layout/Fi nish, Paper Tray/Output Tray, Cover Mode/Transparency Interleave, an d Per Page Setting) for this ma- chine.
Setting up the PPD driver (Mac OS X) 8 C451 8-6 2 Note Click the [Acquire Devi ce Information] button on th e Printer Informa tion dialog box to communicat e with this ma chine and read the stat us of the settings specified on th is machine. You ca nnot use this fun ction if you are not connected to or able to communicate with this machine.
Setting up the PPD driver (Mac OS X) 8 C451 8-7 8.2 Page Setup Page Attributes (basic setting s) 1 Select “Page Se tup” or “Pap er Setup” from the [File] menu . 2 Select “Page Attributes”. 3 Specify setti ngs for the following: – Paper Size: Specifies the paper size.
Setting up the PPD driver (Mac OS X) 8 C451 8-8 2 Note “12 × 18” paper size i s one size larger t han A3 paper size at 504.8 × 457.2 mm. To print on paper sizes ot her than the standard size s, be sure to set the custom paper sizes in Cu stom Page Sizes first.
Setting up the PPD driver (Mac OS X) 8 C451 8-9 5 Specify setti ngs for the following: – Page Size (Paper Size): Speci fies any paper size. – Printer Margins: Spec ifies the paper margins. 6 For Mac OS X 10.4, continue with ste p 7. For Mac OS 10.
Setting up the PPD driver (Mac OS X) 8 C451 8-10 8.3 Printing General settings 1 From the [File] menu, select “Print”. 2 Select “Copies & Pages”. 3 Specify setti ngs for the following: – Copies: Specifies the numbe r of copies to print. – Collated: Prints multiple copies in sets.
Setting up the PPD driver (Mac OS X) 8 C451 8-11 8.4 Output Method Collate: Prints multiple copies in sets. Offset: Specifies offset. Output Method: Specifies the output meth od. For details, re fer to “Selecting the output method” on page 8-12. User Authentication: Performs user authentication.
Setting up the PPD driver (Mac OS X) 8 C451 8-12 Selecting the output method Not only can you print directl y, but you can select “Secure Print”, which re- quires a password to print, or “Save in User Box”, whic h saves data in the boxes that were created on the HDD.
Setting up the PPD driver (Mac OS X) 8 C451 8-13 2 Note By selecting th e “Save Settings” check bo x, the spec ified settings a re saved. In addition, if the “Do not sh ow thi s window when setting” check box is selected, the dialog box doe s not appear when the function is specified.
Setting up the PPD driver (Mac OS X) 8 C451 8-14 2 Note By selecting th e “Save Settings” check bo x, the spec ified settings a re saved. In addition, if the “Do not sh ow thi s window when setting” check box is selected, the dialog box doe s not appear when the function is specified.
Setting up the PPD driver (Mac OS X) 8 C451 8-15 Specifying the user authentication settings If the user authent ication settings have bee n specified on this machi ne, you must enter a user name and password.
Setting up the PPD driver (Mac OS X) 8 C451 8-16 2 Note If this machine has been set to perm it public users, the ma chine can b e used without a user name and password. If performing user authentication on a server, the server settings must be specified.
Setting up the PPD driver (Mac OS X) 8 C451 8-17 2 Enter the department name and password. 3 Click the [OK] button. 2 Note By selecting th e “Save Settings” check bo x, the spec ified settings a re saved.
Setting up the PPD driver (Mac OS X) 8 C451 8-18 Secure Print: Displays the Secure Prin t dialog box for entering an ID and password. This is the same dialog box that appears when “Secure Print” is specified from the “Ou tpu t Method” drop-down list.
Setting up the PPD driver (Mac OS X) 8 C451 8-19 Administrator Settings: Displays the dialog box in which you can change the display of the authentication setti ng dialog box or in which you can change the encryption passphra se.
Setting up the PPD driver (Mac OS X) 8 C451 8-20 8.5 Layout/Finish You can switch between the La yout dialog box and the Finish dialog box..
Setting up the PPD driver (Mac OS X) 8 C451 8-21 Print Type: Specifies duplex printing and booklet printing. Binding Position: Specifies the binding position. Poster Mode: Prints one page of an or iginal document di vided on multiple pages. Overlap width line: Prints an overlap wi dth line on split pages.
Setting up the PPD driver (Mac OS X) 8 C451 8-22 2 Reminder When printing a job tha t contains pages of differen t sizes and orientation s with the “Poster Mode” setting speci fi ed, images may be missing or over- lapping when the document is printed.
Setting up the PPD driver (Mac OS X) 8 C451 8-23 Shifting imag es The entire print image of a document is shi fted and then printed. You can use this function when you want to adjust th e print position. 1 Select the “Image Shif t” check box. 2 Select the shift directi on and set the values.
Setting up the PPD driver (Mac OS X) 8 C451 8-24 Chapters You can specify the page you want to print on the front side when duplex printing or booklet printing. Even if a specified page comes up to be printed on the back side in duplex printi ng or bo oklet printin g, the sp ecif ied page is moved and printed on the front side.
Setting up the PPD driver (Mac OS X) 8 C451 8-25 Checking the Layout/Finish setting details By clicking the [Detail Settings] button, the “Layout/Finish” fun ctions for which deta iled settings have been specified are show n. The settings can be shown by clicking the [Expand All] button.
Setting up the PPD driver (Mac OS X) 8 C451 8-26 8.6 Paper Tray/Output Tray Paper Tray: Selects the paper tray for printing. Paper Type: Selects the pape r type for printing. This setting can be specified when the paper tray setting is set t o “Auto”.
Setting up the PPD driver (Mac OS X) 8 C451 8-27 Specifying the paper type for a paper tray You can specify the paper type for a paper tray. 1 Click the [Paper Settings for Each Tray] button. The dialog box for setting th e detailed set tings appears.
Setting up the PPD driver (Mac OS X) 8 C451 8-28 8.7 Cover Mode/Trans parency Interleave You can switch between the Cove r Mode dialog box and th e Transparency Interleave dialog box.
Setting up the PPD driver (Mac OS X) 8 C451 8-29 Front Cover: Attaches a front cover page . Select this check box , and then se- lect the print conditions from the up per drop-down list, and the paper tray that contains th e loaded pa per to be used from the lower drop-down list.
Setting up the PPD driver (Mac OS X) 8 C451 8-30 8.8 Per Page Setting You can specify the print type and pape r tray for each pa ge. Th is comes in handy whe n you want to change th e pape r tr ay during a print job when print- ing multiple pages. The settings are added to the per page setting list and can be used as necessary.
Setting up the PPD driver (Mac OS X) 8 C451 8-31 Adding and ed iting the setti ngs in Per Page Sett ing 1 Select the “Per Page Settin g” check box. 2 Click the [Add] button to add a new setting to the list. To edit the list, select the desired name in the list, and then click the [Edit] button.
Setting up the PPD driver (Mac OS X) 8 C451 8-32 2 Note To change existing prin t settings, se lect the desired ro w and change the settings. To delete existing print se ttings, select the desired row, and then click the [Delet e] button. Click the [ + ] button or the [ , ] button to change the page number starting with the smallest page number.
Setting up the PPD driver (Mac OS X) 8 C451 8-33 8.9 Stamp/Composition Copy Protect: Prints a specia l pattern to prevent copying. Date/Time: Prints the date and time. Page Number: Prints the page number. Header/Footer: Prints a header and a footer. Printing with c opy protection You can print a special pattern on an en tire page while printing.
Setting up the PPD driver (Mac OS X) 8 C451 8-34 2 Specify the copy protection type and the position. Multiple print i tems can be spec ified. – Characters: E mbeds the sele cted character string in a pattern.
Setting up the PPD driver (Mac OS X) 8 C451 8-35 3 Select the composition method for copy protection. Select “Copy Protect” to specify th e de sired results when copying, or simply select “Repeatable Stamp”. In addition, you can sel ect the embedding conditions.
Setting up the PPD driver (Mac OS X) 8 C451 8-36 Printing the d ate and time You can print the date and time on a docum e nt. 1 Select the “Date/Time” ch eck box. The Date/Time di alog box appears. 2 Specify the format and print position for the date and time.
Setting up the PPD driver (Mac OS X) 8 C451 8-37 Printing the p age numbers You can print the page numbers on a document. 1 Select the “Page Numbe r” check box. The Page Number dialog box appears. 2 Specify the format and print position for the printing the page number.
Setting up the PPD driver (Mac OS X) 8 C451 8-38 Printing a header and a footer You can print a header and a footer on a document . 1 Select the “Header/Footer” check box. The Header/Footer dialog box appears. 2 Specify the print settings and pages for the header an d the footer.
Setting up the PPD driver (Mac OS X) 8 C451 8-39 8.10 Quality Select Color: Specifies whether to print in color or grayscale. Glossy Mode: Prints with a gloss. Color Settings: Prints with a quality su i table for the selected orig inal docu- ment. Document: Prints with a quality suitab le for documents with many charac- ters.
Setting up the PPD driver (Mac OS X) 8 C451 8-40 Controlling t he color profile You can add or delete the color profiles that can be selected from Qualit y Ad- justment. 1 Click the [Quali ty Adjustment] button . The Quality Adjustment dialog box appears.
Setting up the PPD driver (Mac OS X) 8 C451 8-41 3 Select the color profile ty pe from the drop-down list. 4 From the Available Profile list, select the profile to be used, and then click the [Add] button.
Setting up the PPD driver (Mac OS X) 8 C451 8-42 8.11 Setting options You can specify the options installed on this ma chine so that they can be used from the printer driver. 2 Reminder If the installed options on this mach ine are not set from “Installable Op- tions”, the option f unction cannot be used with th e printer driver.
Setting up the PPD driver (Mac OS X) 8 C451 8-43 8.12 Saving the driver settings For Mac OS X drivers, you can save the setting values of th e changed driver and recall them as necessary. Saving the driver setti ngs 1 Change the driver settings in “C opies & Pages” and “Layout ”.
Setting up the PPD driver (Mac OS X) 8 C451 8-44 Changing the settings 1 Select “Presets” from the Print dialog box to change the settings. 2 Change the driver settings in “C opies & Pages” and “Layout ”. 3 From “Presets”, click “Save”.
Various settings 9 C451 9-1 9 Various settings 9.1 Print settings in Utility mode You can change th e settings of the printer fu nctions in this machin e’s control panel. Default settings To display the User Settings screen 1 Press the [Utility/Coun - ter] key.
Various settings 9 C451 9-2 The User Settings screen appears. 2 Note An item can a lso be selecte d by pressing the key in the keypad for the number beside the desired button. For [2 User Settings], press the [2] key in the keypad. To quit specifying the Utility mode settings, press the [Utili ty/Counter] key.
Various settings 9 C451 9-3 1 In the User Settings screen, touch [5 Printer Settings]. 2 Touch [1 Basic Settings]. 3 Touch [PDL Setting]..
Various settings 9 C451 9-4 4 Touch the button for the desired sett ing. Number of Copies You can specify the default numbe r of copies when no setting has bee n specified from the printe r driver. (Default settin g: 1) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1.
Various settings 9 C451 9-5 4 Press the [C] (clear) key to erase the value, and then use the keypad to type in the default number of co pies (between 1 and 9999 sets). – If a value outside of the allo wable range is specified, the message “Input Error” appears.
Various settings 9 C451 9-6 3 Touch [Original Direction]. 4 Touch the button for the desired sett ing. Spool setting You can specify whether or not a sp ool is used. (Def ault setting: ON) ON: When the next job is rece ived while processing a job, the print data is stored in the HDD.
Various settings 9 C451 9-7 1 In the User Settings screen, touch [5 Printer Settings]. 2 Touch [1 Basic Setting]. 3 Touch [Spool Print Jobs in HDD before RIP ].
Various settings 9 C451 9-8 ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1. 1 In the User Settings screen, touch [5 Printer Settings]. 2 Touch [1 Basic Setting]. 3 Touch [A4/A3 ⇔ LTR/LGR Auto Switch].
Various settings 9 C451 9-9 ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1. 1 In the User Settings screen, touch [5 Printer Settings]. 2 Touch [1 Basic Setting]. 3 Touch [ ↑ ] or [ ↓ ], and then touch [Banner Sheet Setting].
Various settings 9 C451 9-10 Binding Direct ion Adjustment You can specify whether to adjust the binding position for duplex printing. (Default setting: Fin ishing Priority) If you want to incre ase the print effici ency, select “Produ ctivity Priority”.
Various settings 9 C451 9-11 4 Touch the button for the desired sett ing. Line Width Adjustment You can adjust th e line widt h to make fine li nes and small cha racters easy to see. (Default setti ng: Thin) - Thin: Prints sharp charac ters and li nes.
Various settings 9 C451 9-12 3 Touch [ ↑ ] or [ ↓ ] to switch the page, and then tou ch [Line Width Adjust- ment]. 4 Touch the button for the desired sett ing.
Various settings 9 C451 9-13 Paper Tray You can specify the input tra y to use when none ha s been specified from the printer driver. (Default setting: Auto) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1.
Various settings 9 C451 9-14 4 Touch the button of th e desired paper tray. – To select the paper tray automatically, touch [Auto]. 5 Touch [OK]..
Various settings 9 C451 9-15 Paper Size You can specify the paper size to use when no setting ha s been specified from the printer driver. (Default setti ng: 8-1/2 × 11) 2 Note For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1.
Various settings 9 C451 9-16 2-Sided Print You can specify the default duplex pri nt ing setting. (Default setting: OFF) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1. 1 In the User Settings screen, touch [5 Printer Settings].
Various settings 9 C451 9-17 Binding Pos ition You can specify the de fault binding position f or duplex printing. (Defaul t set- ting: Left Bind) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1.
Various settings 9 C451 9-18 Staple You can specify th e staple settings. (Default setting: OFF) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1. 1 In the User Settings screen, touch [5 Printer Settings].
Various settings 9 C451 9-19 Punch You can specify the hole punching settings. (De fault setting: OFF) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1. 1 In the User Settings screen, touch [5 Printer Settings].
Various settings 9 C451 9-20 Banner Paper Tray You can specify the pa per tray to be us ed for banner page printing. (Default setting: Auto) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1.
Various settings 9 C451 9-21 Font Settings You can specify the font to use when no setting has been specifie d from the printer driver. (Default setting: Courier) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1.
Various settings 9 C451 9-22 4 Touch [Resident Font]. – If downloaded font s are available, [Downloa d Font] can also be se- lected. 5 Touch the button for the desired sett ing. – Touch [ ↑ ] or [ ↓ ] to switch the pages, and then touch the button for the desired setting.
Various settings 9 C451 9-23 Symbol Set You can specify the font symbol set to use when no setting has been spec- ified from the printer driver. (Defau l t setting: Depends on the location.) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1.
Various settings 9 C451 9-24 Font Size You can specify the font size to use when no setting has been specified f rom the printer driver. (Default settings: Sc alable Font - 12 .00 point; Bitmap Font - 10.00 pitch) Scalable Font: Specifies the font size in points.
Various settings 9 C451 9-25 4 Press the [C] (clear) key to erase the value, and then use the keypad to type in the default font size (Scalable Font: between 4.0 0 and 999.75 points; Bitmap Font: between 0.44 and 99.0 0 pitches). – If a value outside of the allo wable range is specified, the message “Input Error” appears.
Various settings 9 C451 9-26 3 Touch [4 Line/Pa ge]. 4 Press the [C] (clear) key to erase the value, and then use the keypad to type in the default number of lines (between 5 and 128). – If a value outside of the allo wable range is specified, the message “Input Error” appears.
Various settings 9 C451 9-27 ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1. 1 In the User Settings screen, touch [5 Printer Settings]. 2 Touch [3 PCL Settin gs]. 3 Touch [5 CR/LF Mapping].
Various settings 9 C451 9-28 Print PS Errors You can specify whether to print the error message when an error oc curs during PS rasterization. (Default setting: OFF) ! Detail For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1.
Various settings 9 C451 9-29 4 Touch the button for the desired sett ing. ICC Profile Settings You can specify the profiles to use whe n no setting has been specified from the printer dri ver. 2 Note For details on displaying the User Sett ings screen, refer to “To display the User Settings screen” on page 9-1.
Various settings 9 C451 9-30 4 Touch the desired setting. 5 Touch the profile name for the desired setting. Verify XPS Digital Signature You can specify whether to verify a digital signatu re when XPS prin ting. If verificat ion is spec ified as “ON”, prin tin g cannot be performe d if the name is invalid.
Various settings 9 C451 9-31 2 Touch [5 XPS Settings]. 3 Touch [Verify XPS Digital Signature]. 4 Touch the button for the desired sett ing. ! Detail If an error in the verificat ion of a si gnature occurs, and if the print infor- mation setting i s enabled under Print XPS Errors, th e error information will be printed.
Various settings 9 C451 9-32 Print Reports You can output the following four type s of reports. The report output method here is explaine d in the PCL font list. Configuration Page: Outputs a li st of this machine’s settings. Demo Page: Outputs a test page.
Various settings 9 C451 9-33 4 Touch the button for the d e sired pape r tray and touch [1-Sided] or [2- Sided]. 5 To print a report, touch [Start] or press the [Start] key.
Various settings 9 C451 9-34 9.2 Print settings in Administrator mode To display the Administrator Settings screen 1 Press the [Utility/Coun - ter] key.
Various settings 9 C451 9-35 3 Enter the password, and then touch [OK]. – In the Utility mode, an item can al so be selected by pressing the key in the keypad for the number besi de the desired button. For [3 Ad- ministrator Settings], press the [3] key in the keypad.
Various settings 9 C451 9-36 Print/Fax O utput Set ting You can specify whether to print data afte r it is received or to print it simul- taneously as it is being received.
Various settings 9 C451 9-37 4 Touch [Print] or [Fax]. The buttons for the availabl e settings appear. 5 Touch the button for the desired sett ing. The timing the data is printed is set. 2 Note If “Batch Print” is selected, printing starts w hen all the data is received and the pri nt job is queued.
Various settings 9 C451 9-38 3 In the Output Settings screen, to uch [2 Output Tray Settings]. The Output Tray Settings screen a ppears. 4 Touch the button for the desired sett ing. The output tray is set. To delete secure print documents All saved secure print do cuments can be deleted.
Various settings 9 C451 9-39 4 To delete the secure print documents, touch [Yes]. 5 Touch [OK]. To specify the secure document delete time The length of time for deleti ng a secu re document after it is saved can be specified. 1 In the Administrator Settings scre en, touch [1 System Settings].
Various settings 9 C451 9-40 4 Select [Yes] or [No]. If [Yes] is selecte d, be sure to also select the time until the secure document is deleted. 5 Touch [OK].
Various settings 9 C451 9-41 ! Detail To display the Administrator Settings screen, refer to “To display the Ad- ministrator Settings sc reen” on page 9-34.
Various settings 9 C451 9-42 I/F Timeout You can set the time until a commu nication timeout occurs for the USB or network interf ace. (Default setting: 60 sec.) ! Detail To display the Administrator Settings screen, refer to “To display the Ad- ministrator Settings sc reen” on page 9-34.
Various settings 9 C451 9-43 4 Touch [OK]. The time until a commu nicat ion timeout occurs is set. Print XPS Errors You can specify whether to print an e rror message when an error occurs dur- ing XPS printing.
Various settings 9 C451 9-44 Print Data Capture You can specify whether to allow or pro hibit data capturing of a print job. (Defaul t setting: All ow) ! Detail To display the Administrator Settings screen, refer to “To display the Ad- ministrator Settings sc reen” on page 9-34.
Various settings 9 C451 9-45 Driver Password Encryption Setting For the encryption common key for the pa ssword that is adde d to a print job, you can specify whe ther to use the encr yption key that wa s specif ied at the factory or change it to a user-defined encryption password .
Various settings 9 C451 9-46 4 If “User-D efined” was selecte d, ente r 20 characters for the encryption password, and then touch [OK]. – Consecutive encryption passwords with the same chara cters are invalid. 5 Reenter the encryption passw ord, and then touch [OK].
Various settings 9 C451 9-47 9.3 Print job management Specifying job operations You can specify the job opera tions on th is ma chine by setting a printer dri ver.
Various settings 9 C451 9-48 For details, refer to “Selecting the output method” on page 5-11 and page 6-12..
Various settings 9 C451 9-49 Specifying settings (for Mac OS X) 1 From the [File] menu, select “Print”. 2 Select “Output Method”. 3 From the “Output Method” drop-down l ist, select the output method.
Various settings 9 C451 9-50 Job storage When “Outpu t Method” in the printe r driver is selected, a print document can be stored in th is machine as a print job. To print a store d job, you must recall the job using th is machine’ s control panel.
Various settings 9 C451 9-51 2 With [Current Jobs] displayed, touch [Release Held Job]. The Release Held Jo b screen appears. 3 From the job list, sel ect the job you want to print. – To print the remaining jobs, skip to step 7. – To check the print results again, contin ue to step 4.
Various settings 9 C451 9-52 6 Change the printing conditions on the Change Settings sc reen, and then touch [OK]. The Release Held Job screen appears aga in. 7 Touch [OK] or press the [Start ] key in the control panel. – To cancel printing the job, touc h [Cancel].
Various settings 9 C451 9-53 When “Confidential Document A ccess Method” is set to “Mode 1” 1 Press the [Box] key in this mach ine’s control pa nel, and then touch [Use Docum ent]. 2 Select [System User Box], then [Se c ure Print User Box ], and then touc h [OK].
Various settings 9 C451 9-54 3 Type in the ID for the se cure pri nt docum ent, and then touch [ OK]. 4 Type in the password for the secure print document, and then touch [OK]. If the specified ID and password matc h, the secure print docu ment list appears.
Various settings 9 C451 9-55 – The conten ts and a preview of the document can be checked by touching [Documen t Detail s]. 6 If necessary, ch ange the print conditions. 7 Touch [Start] or press the [Sta rt] key in the control panel. – To cancel printing the job, touc h [Cancel].
Various settings 9 C451 9-56 When “Confidential Document A ccess Method” is set to “Mode 2” 1 Press the [Box] key in this mach ine’s control pa nel, and then touch [Use Docum ent]. 2 Select [System User B ox], and touch [Secu re Print User Box], and then touch [OK].
Various settings 9 C451 9-57 3 Type in the ID for the se cure pri nt docum ent, and then touch [ OK]. If the spec ified ID matche s, the secure print document list appears. 4 Select the document to be prin ted, and then t ouch [Enter Password]. – The conten ts and a preview of the document can be checked by touching [Documen t Detail s].
Various settings 9 C451 9-58 6 Select the document to be pri nted, and then t ouch [Print]. 7 If necessary, ch ange the print conditions. – If “Prohibit Function s when Auth. Error” in Administrator mode is set to “Mode 2” and an incorrect document password is entered the specified number of times, th e selected document is locked.
Various settings 9 C451 9-59 Recalling jobs (Save in User Box) “Save in User Box” and “Save in User Box and Print” jobs are saved in a box of the specified number. To print a document saved in a box, op en the specified box to remov e the document.
Various settings 9 C451 9-60 – If a password is not specified to a box, skip to step 4. 3 Type in the password for th e box, and then touch [OK]. The specified box document list appears. 4 Select the document to be pri nted, and then t ouch [Print].
Various settings 9 C451 9-61 5 If necessary, ch ange the print conditions. 6 Touch [Start] or press the [Sta rt] key in the control panel. – To cancel printing the job, touc h [Cancel].
Various settings 9 C451 9-62 2 Note If printing is not allowed, printing cannot be performed even when used by a registered user. For the us er authen tication details, co nsult the administrator of this ma- chine. If performing u ser authen tication with an optional aut hentication unit, en- ter the user name and password.
Various settings 9 C451 9-63 5 After specifying the set tings, clic k the [OK] button to begin printing. – If the entered user name is a name registered on this machine, the job is printed and counted as a job for the specified user. Specifying settings (for Mac OS X) 1 From the [File] menu, select “Print”.
Various settings 9 C451 9-64 – If this machine has been set to pe rmit public users, the machine can be used without a us er name and password. Printing with this machine when account track settings have been ap- plied When the accoun t track settings have been specified on this machine, you must enter a password when printing a job.
Various settings 9 C451 9-65 Specifying se ttings ( for Window s) 1 Click the [Properties] button or the [P references] button on the Print di- alog box to display the Printing Preferences dialog box. 2 Click the Basic tab. 3 Click the [Authenticat ion/Account Track] button.
Various settings 9 C451 9-66 Specifying settings (for Mac OS X) 1 From the [File] menu, select “Print”. 2 Select “Output Method”. 3 Select the “Account Trac k” check box.
Various settings 9 C451 9-67 Job operations on Pa geScope Web Connection From PageScope Web C onnection, you can also check the st atus of the job being performed by this machine. For details, refer to the User’s Gu ide [PageScope Web Connection Opera- tions].
Various settings 9 C451 9-68 9.4 Printing on banner paper Paper up to 1200 mm (47-1/4 inch) long can be loaded into the bypass tr ay and printed on using this machine with the appropriate setting specified from the control panel. Loading banner paper and printing on it is referred to as “banner printing” throughout the manual.
Various settings 9 C451 9-69 Specifying printer driver sett ings To specify printer driver sett ings Specify the paper sizes to be printed as custom sizes. 1 Click the Basic tab. 2 From the “Original Size” or “Paper Size” drop-down list, select “Cus- tom Size”.
Various settings 9 C451 9-70 Printing To pri nt 1 Press the [Utility/Counter] key in the control pane l. 2 Touch [6 Banner Printing]. 3 Touch [Allow], and then touch [OK].
Various settings 9 C451 9-71 6 Set the guide of the installation kit up. 7 With the side to be printed on faci ng down, insert the paper as much as possible into the fee d slot.
Various settings 9 C451 9-72 8 Slide the lateral guides to fit the size of paper being loaded. 9 Select a job to be printed from the computer, and then click “Print” on the “File” menu. 10 Specify the desired settings, and then cl ick the [OK] button.
Various settings 9 C451 9-73 12 Touch [Yes], and then touch [OK]..
Various settings 9 C451 9-74.
Troubleshooting 10 C451 10-1 10 Troubleshooting 10.1 Unable to Print This chapter explains the troubl esh ooting procedures for possible malfunc- tions. Perform the troubleshooting procedures described below if this machine does not p rint after you have sent a prin t job.
Troubleshooting 10 C451 10-2 If the problem persists after all of these procedures have been performed, read the User’s Guide [Copy Operations]. The machine doe s not start printing although the print job was com- pleted on t he compu- ter. The printer driver select ed for printing is not c ompatible with the printer controll er.
Troubleshooting 10 C451 10-3 10.2 Unable to specify desired settings or unable to print as specified Perform these troubleshooting procedure s if you cannot specify the desired settings in the printer driver, or if th e print results do no t represent the set- tings that have been specified.
Troubleshooting 10 C451 10-4 The stapling posit ion is not as e xpected. The orientat ion setting is not co r- rect. Check the stapling position in the printer driver setup dialog box.
Troubleshooting 10 C451 10-5 10.3 Error message Message Cause and remedy Cannot conne ct to th e networ k. A connectio n to the network could not be established. Check if the netwo rk cable is correctly connecte d. In addition, check that the Network Setting paramete rs on the Administrator Settin g screen have been correctly spec ified.
Troubleshooting 10 C451 10-6.
Appendix 11 C451 11-1 11 Appendix 11.1 Specifications Item Specifications Model Built-in printer control ler Power supply Common with the main body RAM 1024 MB Hard disk 60 GB Interface Standard: Eth ernet (10Base- T/100Base-TX/1000 Base-T) USB 2.0 Frame type Ethernet 802.
Appendix 11 C451 11-2 Printer driv- er Konica Minolt a PCL Driver (PCL driver) Windows NT Workst ation/Server Version4.0(Service Pack 6 or later) Windows 2000 Professiona l/Server(Ser vice Pack 3 or l.
Appendix 11 C451 11-3 11.2 Configuration page.
Appendix 11 C451 11-4 11.3 Font list PCL font list.
Appendix 11 C451 11-5 PS font list.
Appendix 11 C451 11-6 Demo page.
Appendix 11 C451 11-7 11.4 PPD driver (Linux and applications) PPD driver types The PPD driver contains the PPD inform a tion for Mac OS 9, Li nux, and ap- plications. - For Linux: Install the driver whe n us ing with Linux. ( The PPD driver for Linux and the PPD driver for OpenOffice are included.
Appendix 11 C451 11-8 To register the PPD driv er for OpenOffice 1 In CUPS Printing System, click the [Add Printer] button, and then spec - ify PPD to add th is machine. 2 Open the OpenOffice Prin ter Administrator tool. 3 Click the [New Printer] button.
Appendix 11 C451 11-9 About the PPD driver for applications PPD registration destinatio n (example: Adobe PageMaker) - Adobe PageMaker 6.0 Copy the PPD file to RSRCPPD4, wh ich is under the folder to which PageMaker is installed. - Adobe PageMaker 6.5/7.
Appendix 11 C451 11-10 11.5 Glossary Term Definition 10Base-T/100B ase-TX/ 1000Base- T An Ethernet stan dard, which is a cable co nsisting of twisted copper wire pairs. The tra nsmission spee d of 10Base-T is 10 Mbps, of 100Base-TX is 100 Mbps, and of 1000Base- T is 1000 Mbps.
Appendix 11 C451 11-11 DNS Abbrevia tion for D omain Name S ystem. A s ystem th at acquires t he supported IP addresses from host names in a network environmen t. DNS allows the user to ac cess other computers over a net w ork by specifying host names, inste ad of difficult to memorize and under- stand IP addresses.
Appendix 11 C451 11-12 LPD Abbreviation for Line Pr inter Daemon. A printer protocol that uses TCP/IP and is platform-independe nt. Originally developed for BSD UNIX, it has become the standard pr inting protocol and can be used with any genera l computer.
Appendix 11 C451 11-13 PostScript A typical page-d escriptive language deve loped by Adobe and is commonly used for high quality printing. PPD Abbreviation for PostScript Printe r Description. A file used to de- scribe the resolution, usable pape r size, and the PostScript printer model special inf ormation.
Appendix 11 C451 11-14 SLP Abbreviation for Service Location Protocol . A protocol capable of finding service s over a TCP/ IP network and au tomatically s pecifying a client. SMB Abbreviation for Se rver Message Block. A protocol that shar es files and printers over a network and wh ich is mainly used by Microsoft Windows.
Index 12 C451 12-1 12 Index 12.1 Index A Account track .......... ...... 4-12 , 5-16 , 6-17 , 8-16 , 9-64 Add printer wizard .......... ......... ........ .2-8 Administrator mode ........ ................9-34 AppleTalk ......... ......... ...........2-25 , 3-39 B Back cover .
Index 12 C451 12-2 Fold & Staple .......... ........ ............ .... 8-20 Folding .......... ...... 4-19 , 5-24 , 6-25 , 7-10 , 8-20 Font list ............. .................... ..........11-4 Font settings ............. 5-41 , 6-44 , 9-21 Font size .
Index 12 C451 12-3 Paper size .......... ...... 4-9 , 5-7 , 5-9 , 6-8 , 8-7 , 9-1 5 Paper source ....... ...................4-11 , 7-8 Paper tray ...... ... 4-11 , 5-9 , 5-45 , 6-1 0 , 6-48 , 8-26 , 9-13 Paper type ..... .................... ...4-11 , 8-26 Pattern .
Index 12 C451 12-4 Symbol set .......... .................... ....... 9-23 T Test printing ........... ........ ......... ........ .4-2 Time ............ .... 4-23 , 5- 38 , 6-39 , 8-36 Transparenc y interl eave .......... ...... 4-20 , 5-27 , 6-28 , 7-10 , 8-28 Troubleshooting .
Copyright 2007 2007. 7 A00K-9648-22 http://konicaminolta.com.
Een belangrijk punt na aankoop van elk apparaat Konica Minolta BIZHUP C451 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Konica Minolta BIZHUP C451 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Konica Minolta BIZHUP C451 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Konica Minolta BIZHUP C451 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Konica Minolta BIZHUP C451 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Konica Minolta BIZHUP C451 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Konica Minolta BIZHUP C451 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Konica Minolta BIZHUP C451 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
