Gebruiksaanwijzing /service van het product KR.XR van de fabrikant Kraun
Ga naar pagina of 24
www .kraun.it Router 8 Ports 10/100 User’s Manual Cod. KR.XR.
www .kraun.it 2 User’s Manual Contents Package contents 4 1. About this Guide 4 1.1 Purposes 4 1.2 Conventions 4 1.3 Overview of this User Guide 4 2. Introduction 4 2.1 Overview of the Router 4 2.2 Features 4 2.3 Panel Layout 4 2.3.1 The Front Panel 4 2.
www .kraun.it 3 User’s Manual 5.6.2 Port Triggering 12 5.6.3 DMZ 12 5.6.4 UPnP 13 5.7 Security 13 5.7.1 Firewall 13 5.7.2 IP Address Filtering 13 5.7.3 Domain Filtering 14 5.7.4 MAC Filtering 15 5.7.5 Remote Management 15 5.7.6 Advanced Security 16 5.
www .kraun.it 4 User’s Manual Package contents The following contents should be found in your box: • One Kraun Router 8 Ports 10/100 • One AC power Adapter for Kraun Router 8 Ports 10/100 • Qu.
www .kraun.it 5 User’s Manual 2.3.2 The Rear Panel The rear panel contains the following features. (Viewed from left to right): • Factory Default Reset button There are two ways to reset the router’s factory defaults: 1. Use the Factory Defaults function on System Tools -> Factory Defaults page in the router’s Web-based Utility.
www .kraun.it 6 User’s Manual The following example is in Windows 2000. Open a command prompt, and type ping 192.168.1.1, then press En- ter. Figure 4-1 Successful result of Ping command If the result displayed is similar to what is shown in figure 4-1, the con- nection between your PC and the router has been established.
www .kraun.it 7 User’s Manual Figure 4-8 Quick Setup - Static IP Note: The IP parameters should have been provided by your ISP. • IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP). Enter the IP address into the field.
www .kraun.it 8 User’s Manual • MAC Address - The physical address of the router, as seen from the LAN. The value can’t be changed. • IP Address - Enter the IP address of your router in dotted-decimal notation (factory default: 192.168.1.1). • Subnet Mask - An address code that determines the size of the net- work.
www .kraun.it 9 User’s Manual • MTU Size - The normal MTU (Maximum Transmission Unit) val- ue for most Ethernet networks is 1500 Bytes. For some ISPs you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.
www .kraun.it 10 User’s Manual ically transmit your IP address to the router during login, click “Use the IP Address specified by ISP” check box and enter the IP address in dotted-decimal notation, which your ISP provided. • Detect Online Interval - The default value is 0, you can input the value between 0 and 120.
www .kraun.it 11 User’s Manual • Assigned IP - The IP address that the router has allocated to the DHCP client. • Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically. You cannot change any of the values on this page.
www .kraun.it 12 User’s Manual and the Protocol pull-down list. 3. Click the Save button. To delete a service entry: 1. Clear the entry’s all information except for the Protocol pull-down list. 2. Click the Save button. To delete all service entries: 1.
www .kraun.it 13 User’s Manual 2. Enter the local host IP address in the DMZ Host IP Address field 3. Click the Save button. Note: After you set the DMZ host, the firewall related to the host will not work.
www .kraun.it 14 User’s Manual pear shown in figure 5-21: Figure 5-21 Add or Modify an IP Address Filtering Entry To create or modify an IP Address Filtering entry, please follow these instructions: 1. Effective Time - Enter a range of time in HHMM format, which point to the range time for the entry to take effect.
www .kraun.it 15 User’s Manual To Modify or delete an existing entry: 1. Find the desired entry in the table. 2. Click Modify or Delete as desired on the Edit column. Click the Enabled All button to enable all entries. Click the Disable All button disable all entries.
www .kraun.it 16 User’s Manual your browser’s address (in IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example, if your Router’s WAN address is 202.96.12.8 and you use port number 8080, enter in your browser: http://202.
www .kraun.it 17 User’s Manual To add static routing entries: 1. Enter the following data: • Destination IP Address - The Destination IP Address is the address of the network or host that you want to assign to a static route.
www .kraun.it 18 User’s Manual There are seven submenus under the System Tools menu (shown in fig- ure 5-32): Time, Firmware, Factory Defaults, Reboot, Password, Log and Statistics. Click any of them, and you will be able to configure the cor- responding function.
www .kraun.it 19 User’s Manual Click the Reboot button to reboot the router. Some settings of the router will take effect only after rebooting, which include: • Change LAN IP Address. (System will reboot automatically) • MAC Clone (system will reboot automatically) • DHCP service function.
www .kraun.it 20 User’s Manual Appendix A: FAQ 1. How do I configure the router to access Internet by ADSL us- ers? 1) First, configure the ADSL modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL modem to the WAN port on the router.
www .kraun.it 21 User’s Manual 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will interfere with the WEB man- agement port 80 on the router, you must change the WEB man- agement port number to avoid interference.
www .kraun.it 22 User’s Manual 3) Click on Properties. The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. 4) Now you have two ways to configure the TCP/IP protocol below: • Assigned by DHCP Sever a.
www .kraun.it 23 User’s Manual b. Type the router’s LAN IP address (the default IP is 192.168.1.1) into the New gateway field on the Gateway tab, and click on the Add button, as shown in the figure: Figure B-8 Gateway tab c.
www .kraun.it.
Een belangrijk punt na aankoop van elk apparaat Kraun KR.XR (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kraun KR.XR heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kraun KR.XR vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kraun KR.XR leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kraun KR.XR krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kraun KR.XR bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kraun KR.XR kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kraun KR.XR . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.