Gebruiksaanwijzing /service van het product KM-C2230 van de fabrikant Kyocera
Ga naar pagina of 150
Enlarge Display Mode User ’ s Guide Please read the User ’ s Guide before using the copier . Keep it close to the copier for easy reference. KM-C2230.
Introductio n i Intr oduct ion This User’s Guide contains details on the operatio n of the vari ous functions avai lable in the Enlarge Dis- play mode and on the vari ous op erating precau- tions. In order t o en sure that this machine is used correctly a nd efficiently, carefully read this guide befor e using the mach ine.
Contents ii Contents The topics listed belo w are described in the Enlarge Display Mode Operations Guide. For detai ls on oth- er topics, refer to the User ’ s Guide. ✎ Additional Infor mation The descriptions in this guid e show sample screens with i nch measurements.
Con tents iii Pape r type icons ......... ......... ....... ........1 -15 Pape r supply icons ....... ....... .......... .....1- 17 To use the Volume Track mode ....... ..1-18 2 Paper Settings 2.1 Pa per Set tings ....... ....... .......... ..........
Contents iv 4 Use ful Opera tions 4.1 Ba sic Copyi ng .......... ......... .......... ...... 4- 2 To ma ke copies ..... .......... ......... ....... .... 4-2 4.2 St opping Cop ying ...... .......... ......... .... 4-6 To st op a copy job ... .........
Con tents v To specify different vertical and horizontal scaling proporti ons (X/Y Zoom se ttings) .... ......... .......... .....5- 21 5.4 Se lecting a P aper Set ting .... ......... ...5-23 To se lect t he Pa per settin g.. ....... ........5 -24 5.5 Se lecting Orig inal Setti ng.
Contents vi 6.2 Setting the “ Enlarge-Display Notice ” Funct ion ........ ......... .......... .......... ........ 6- 5 To specify whether the confirmati on message for cance ling the Enlarge Display mode appears ........... 6-6 Operations f or t he confirmation message for cance ling the Enla rge Display mo de .
Before M aking Copies Chapter 1 1 1 Before Making Copies This chapter provides information that is important to know before mak- ing copies..
1 1.1 E xplanat ion o f Guide C onvent ions 1-2 Before M aking Copies Chapter 1 1.1 Explanatio n of Guide Conven- tions CAUTION Failure to observe instructions highlighted in this mann er may result in ser ious injurie s or property damage. ➜ Observe all ca utions in order to ensure safe use of this machine.
1.1 Explan ation of Gui de Convent ions 1 1-3 Before M aking Copies Chapter 1 [ ] This indicates a key ei ther on the touch panel or on the contro l panel.
1 1.2 Cont rol Panel Parts and Their Func tions 1-4 Before M aking Copies Chapter 1 1.2 Control Panel Parts and Their Functions } Reference For details, refer to “ Control Panel ” on page 2-12 of the User ’ s Guide. 12 11 10 9 1 2 3 4 8 7 6 5 No.
1.2 Contro l Panel Parts a nd Their Func tions 1 1-5 Before M aking Copies Chapter 1 3 [Access] key If Volume Track mode has been se t, press this key after entering t he account number and a ccess code in order to use th is machine. 4 [Inter rupt] key Press to enter I nterrupt mode.
1 1.2 Cont rol Panel Parts and Their Func tions 1-6 Before M aking Copies Chapter 1 12 11 10 9 1 2 3 4 8 7 6 5 No. Part Name Description 8 [S tart] key Press to s tart copyin g. When this machine is ready to begin copying , the indicator on the [Start] key lights up in green.
1.2 Contro l Panel Parts a nd Their Func tions 1 1-7 Before M aking Copies Chapter 1 12 [Mode Check] key Press to di splay screens showing the specified settings.
1 1.3 Adjus ting the Angle of the Control Pa nel 1-8 Before M aking Copies Chapter 1 1.3 Adjusting the Angle of the Con- trol Panel } Reference For details, refer to “ Adjusting the Angle of the Control Panel ” o n page 2-23 of the User ’ s Guide.
1.3 Adjusti ng the Angle o f the Control Pan el 1 1-9 Before M aking Copies Chapter 1 To lower the ang le of the control panel ➜ Pull the control panel rele ase lever toward you, and then push down on the control panel.
1 1.4 Touc h Panel 1-10 Before M aking Copies Chapter 1 1.4 Touch Panel Displaying the en larged Basic screen } Reference For deta ils, refer to “ Touch Panel ” on page 2-1 4 of the User ’ s Guide. When this machine is turned on (the power switch is set to “ I ” ), the st andard-sized Basic screen ap- pears in the touch panel.
1.4 Touch Panel 1 1-11 Before M aking Copies Chapter 1 The enlarged Basic screen appears in the touch panel. ✎ Additional I nformation Press the [Enlar ge Display] key in t he control panel to return th e Basic screen to it s standard size.
1 1.4 Touc h Panel 1-12 Before M aking Copies Chapter 1 Touc h panel op erat ion To acti vate a fu nction or to s elect a s etting, lightly touch the desired function or setting shown on the touch panel. CAUTION Do not apply ex treme pressure to the touch panel, otherwise it may be scratched or dam- aged.
1.4 Touch Panel 1 1-13 Before M aking Copies Chapter 1 Keys displayed in the touch panel Touch this key to display the Basic scre en. This key ap pears when there are jo bs queued to be print ed. Touch this key to display the Jo b List screen. For details on jobs, refer to chapter 7 “ Managing Jobs ” .
1 1.4 Touc h Panel 1-14 Before M aking Copies Chapter 1 This key appears if an e rror occurs dur- ing image stabilizing , or during pr int or scan operations. Touch this key to disp lay the status of the machine. Inform the service repre- sentative of the number that is dis- playe d.
1.4 Touch Panel 1 1-15 Before M aking Copies Chapter 1 Paper type icons If paper other than plai n paper is specified for the 1st drawer and the multiple bypass tray, t he icon in- dicati ng the paper type appears in the Paper/S ize screen.
1 1.4 Touc h Panel 1-16 Before M aking Copies Chapter 1 Paper type ico ns that appear Overhead projector transparencies Envelopes Thick paper 1 Thick paper 2 Thick paper 3 Second si de o f a double-si.
1.4 Touch Panel 1 1-17 Before M aking Copies Chapter 1 Paper supply icon s The amount of paper that remains is indicated in the screen where the pap er size is selected. For de tails about the scree n for selecti ng the paper size, refe r to “ Selecting a Paper Setting ” on page 5-23 .
1 1.4 Touc h Panel 1-18 Before M aking Copies Chapter 1 To use the Volume Track mode If th e “ Volume Track Mode ” functio n is set to “ Yes ” , this machine can only be used by users who enter their vol ume nu m b er a nd a ccess number. When the screen shown bel ow app ears, type in the volume number and access number.
1.4 Touch Panel 1 1-19 Before M aking Copies Chapter 1 3 Using the keypad, type in the access num- ber. 4 Press th e [Access] key in t he control p anel. The Basic screen app ears. 5 When you are finished making copies, press the [A ccess] key. The volume number a nd access number in- put screen appears again .
1 1.4 Touc h Panel 1-20 Before M aking Copies Chapter 1.
Paper Setti ngs Chapter 2 2 2 Paper Settings This chapter p rovides procedures for specifying the paper sett ings..
2 2.1 P aper S etting s 2-2 Paper Setti ngs Chapter 2 2.1 Paper Settings } Reference For details, refer to “ Selecting a Paper/Size S et- ting ” on page 3-18 of the User ’ s Guide.
2.1 Paper Settings 2 2-3 Paper Setti ngs Chapter 2 3 Touch [Custom Size]. ❍ To speci fy a paper size in inch measu re- ments, continue wi th step 4. ❍ To speci fy a paper size in metr ic mea- surements, skip to step 6. 4 Touch and to select the length of side X for the paper that is loaded (bet ween 5-1/2 an d 18 inches).
2 2.1 P aper S etting s 2-4 Paper Setti ngs Chapter 2 5 Touch , , and to select the length of sid e Y for t he paper that is loaded (between 3-9/1 6 and 12-1/4 inches). (As an example, the following screen sho ws a specified setti ng of 11-3/4 inches.
2.1 Paper Settings 2 2-5 Paper Setti ngs Chapter 2 6 Using the keypad, type in the lengt h of sid e X for t he paper that i s loaded (between 140 and 457 mm).
2 2.1 P aper S etting s 2-6 Paper Setti ngs Chapter 2 ✎ Additional Info rmation If custom paper sizes have been stored, in- stead of perf orming steps 6 and 7, a st ored pa- per size sett ing can be selected by pressing or .
2.1 Paper Settings 2 2-7 Paper Setti ngs Chapter 2 To store a non -standard (c ustom) paper size for the 1st drawer 1 Touch [Paper/ Size] in the Basic screen. 2 Touch the key for the 1st drawer, and then touch [Change Size]. 3 Touch [Size Registrati on].
2 2.1 P aper S etting s 2-8 Paper Setti ngs Chapter 2 4 Touch and to select the lengt h of side X for the paper that is loaded (be tween 5-1/2 and 18 inches). (As an example, the following screen sho w s a specified setting of 7-3/4 inches.) ❍ Touch until the cursor moves below the value t hat you wish to change.
2.1 Paper Settings 2 2-9 Paper Setti ngs Chapter 2 6 Using the keypad, type in the lengt h of sid e X for t he paper that i s loaded (between 140 and 457 mm).
2 2.1 P aper S etting s 2-10 Paper Setti ngs Chapter 2 9 Touch [Enter]. A non-standard (custom) paper si ze is stored for the 1st drawer..
2.1 Paper Settings 2 2-11 Paper Setti ngs Chapter 2 To specify a paper size setti ng for the 1st drawer The size of the paper loaded int o the 1st drawer is automatically d etected, a nd the appropriat e paper size setting is select ed.
2 2.1 P aper S etting s 2-12 Paper Setti ngs Chapter 2 3 Touch eithe r [Inch] or [Met ric], depending on the size of paper that is loaded. 4 Select the sett ing for the size of paper tha t is loaded, and then to uch [Enter]. (As an example, the following scr een shows the setti ng for Letter selected.
2.1 Paper Settings 2 2-13 Paper Setti ngs Chapter 2 To specify a non-standard (custom ) paper size for the multiple b ypass tray If non-standar d-sized paper is to be loaded into the multiple bypass t ray, specify the size of paper that is to be loaded.
2 2.1 P aper S etting s 2-14 Paper Setti ngs Chapter 2 3 Touch [Custom Size] . ❍ To specify a paper size in in ch measure- ments, cont inue with st ep 4. ❍ To specify a paper size in metric me a- surements, skip to step 6. 4 Touch and to select the lengt h of side X for the paper that is to be loaded (be- tween 5-1/2 and 18 in ches).
2.1 Paper Settings 2 2-15 Paper Setti ngs Chapter 2 5 Touch , , and to select the length of sid e Y f or the paper that is to be loaded (between 3-9/16 and 12-1/4 inches). (As an example, the followin g screen shows a specified setting of 11-3 /4 inches.
2 2.1 P aper S etting s 2-16 Paper Setti ngs Chapter 2 6 Using the keypad, type i n the length of side X for the paper that is to be loaded (between 140 and 457 mm).
2.1 Paper Settings 2 2-17 Paper Setti ngs Chapter 2 ✎ Addi tiona l Inform ation If custom paper sizes have been stor ed, in- stead of perfo rming steps 6 and 7, a stor ed pa- per size setting can be select ed by pressing or .
2 2.1 P aper S etting s 2-18 Paper Setti ngs Chapter 2 To store a non-stan dard (custom) paper size for the mu ltiple bypass tray Two non-standard paper sizes can be stored. 1 Touch [Paper/Size] in the Basic scree n. 2 Touch [Bypass]. 3 Touch [Size Registr ation].
2.1 Paper Settings 2 2-19 Paper Setti ngs Chapter 2 4 Touch and to select the length of side X for the paper that is loaded (bet ween 5-1/2 an d 18 inches). (As an example, the following screen shows a specified setting of 7-3/4 inch es.) ❍ Touch until the cursor moves below the value tha t you wish to change.
2 2.1 P aper S etting s 2-20 Paper Setti ngs Chapter 2 6 Using the keypad, type i n the length of side X for the paper that is to be loaded (between 140 and 457 mm).
2.1 Paper Settings 2 2-21 Paper Setti ngs Chapter 2 9 Touch [Enter ]. A non-stand ard (custom) paper size is stored for the multiple bypass tr ay..
2 2.1 P aper S etting s 2-22 Paper Setti ngs Chapter 2 To specify a paper size settin g for the multiple bypass tray The size of the paper loaded into t he multiple by- pass tray is automatical ly detected, and the appro- priate paper size sett ing is selected.
2.1 Paper Settings 2 2-23 Paper Setti ngs Chapter 2 3 Touch either [Inch] or [Met ric], depending on the size of paper th at is t o be loaded. 4 Select th e setting for the size of paper that is to be loaded, and th en touch [Enter]. (As an example, the followin g screen shows the setting fo r Letter selected.
2 2.1 P aper S etting s 2-24 Paper Setti ngs Chapter 2 To specify the paper type for the multiple bypass tray Select the appr opriate setting for the type of the pa- per loaded into the multip le bypass tray. 1 Touch [Paper/Size] in the Basic scree n.
2.1 Paper Settings 2 2-25 Paper Setti ngs Chapter 2 4 Touch the key for the type of paper loaded into the multiple bypass tray, and then t ouch [Enter].
2 2.1 P aper S etting s 2-26 Paper Setti ngs Chapter 2.
Original Doc uments Chap ter 3 3 3 Original Documents This chapter provi des information on loading o riginal documents..
3 3.1 Load ing the Doc ument 3-2 Original Doc uments Chap ter 3 3.1 L oading the D ocument } Reference For details, refer to “ Feeding the Document ” on page 2-41 of the User ’ s Guide.
3.1 Loadin g the Docu ment 3 3-3 Original Doc uments Chap ter 3 ❍ When loading documents of mixed pag e sizes, align the top edge and left side of the documents, and then touch [Mixed Original]. 2 If necessary, select an Original se tting. For details on the Original sett ing, refer to “ Selecting Original Setting ” on pag e 5-26 .
3 3.1 Load ing the Doc ument 3-4 Original Doc uments Chap ter 3 4 Press the [Start] key in the control panel. The pages of the document are fed in, start- ing with the topmost page.
3.1 Loadin g the Docu ment 3 3-5 Original Doc uments Chap ter 3 Placing the Docu ment On the Original Glass The foll owing procedure describes how a document is placed on the original glass. 1 Lift open origin al cover PLATEN COVER TYPE E (he reafter referr ed to as “ origina l cover ” ), or the dupl exing document feeder if it is installed.
3 3.1 Load ing the Doc ument 3-6 Original Doc uments Chap ter 3 2 Observe the f ollowing precauti ons when loading the document ont o the origi nal glass.
3.1 Loadin g the Docu ment 3 3-7 Original Doc uments Chap ter 3 3 If necessary, select an Original se tting. For details on the Original sett ing, refer to “ Selecting Original Setting ” on pag e 5-26 . ✎ Reminder! With placing the document on the original glas s, be sur e to sel ect the “ 1 ” Original setting.
3 3.1 Load ing the Doc ument 3-8 Original Doc uments Chap ter 3 5 Press the [Start] key in the control panel. Scanning of the document begins. 6 Lift open th e original cover, or t he duplexing document feeder if it is inst alled, and then remove the document.
3.1 Loadin g the Docu ment 3 3-9 Original Doc uments Chap ter 3 ✎ Additional I nformation When using a Copy setting where mul tiple docu- ment pages are to be scanned, such as with “ 1- 2in1 ” or “ 2-2in1 ” , the screen shown below ap- pears afte r each pa ge is scanned.
3 3.1 Load ing the Doc ument 3-10 Original Doc uments Chap ter 3.
Useful Ope rations Ch apter 4 4 4 Useful Operations This chapter provi des information on basic copy operations..
4 4.1 Ba sic Copy ing 4-2 Useful Ope rations Ch apter 4 4.1 Basic Copying } Reference For details, refer to “ Making B asic Copies ” on page xiv of the User ’ s Guide. To make cop ies 1 Load the document to be cop ied. For details, refer to “ Load ing the Document ” on page 3-2 .
4.1 Basic Copyin g 4 4-3 Useful Ope rations Ch apter 4 2 Specify the necessary copy settings. ❍ To speci fy a Color setting , touch [ Color]. For details, refer to “ Selecting a Color Setting ” on page 5-2 . ❍ To sp ecify a Outpu t setting, touch [Out- put].
4 4.1 Ba sic Copy ing 4-4 Useful Ope rations Ch apter 4 ❍ To specify the Original and Copy settings, touch [Orig Ö Copy]. For details, refer to “ Selecting Original Setting ” on page 5-26 and “ Select ing Copy Settings ” on page 5-30 . ❍ To specify Photo/Density sett ings, touch [Photo/Densit y].
4.1 Basic Copyin g 4 4-5 Useful Ope rations Ch apter 4 4 Press the [St art] key in the control panel..
4 4.2 Stoppi ng Copying 4-6 Useful Ope rations Ch apter 4 4.2 Stopping Co pying To stop a copy job ➜ During a copy operati on, press the [Stop ] key in the control panel.
4.2 Stopping Copyi ng 4 4-7 Useful Ope rations Ch apter 4 The copy operat ion stops, an d the message “ Job has been st opped. To resume job press the St art Key.
4 4.3 Qu euing a Copy Job for the Mu ltiple Bypas s Tray 4-8 Useful Ope rations Ch apter 4 4.3 Queuing a Copy Job for the Mul- tiple Bypass Tray If the “ Aut o Paper Select ” setting is specified .
4.3 Queui ng a Copy Job for the Mu ltiple Bypas s Tray 4 4-9 Useful Ope rations Ch apter 4 2 Touch [Bypass Re servation]. 3 Touch [Paper Type]. 4 Select the d esired paper type, and th en touch [Enter].
4 4.3 Qu euing a Copy Job for the Mu ltiple Bypas s Tray 4-10 Useful Ope rations Ch apter 4 5 Select t he desired paper size, and then touch [Enter] . The message “ Job has been stopped. To resume job press the Start Key. ” appears. 6 Press the [Start] key in the control panel.
4.3 Queui ng a Copy Job for the Mu ltiple Bypas s Tray 4 4-11 Useful Ope rations Ch apter 4 7 After the message “ Place paper in the By- pas s Tray . ” appears, replace the paper loaded into t he multiple bypass tray wit h pa- per of the size and type specified in t he screen.
4 4.4 Interru pting a Cop y Job 4-12 Useful Ope rations Ch apter 4 4.4 Interrupting a Copy Job } Reference For details, refer to “ Interrupting a Copy Job (In- terrupt Mode) ” on page 6- 8 of the User ’ s Guide. The current copy job can be temporarily paused so that a quick copy of a different document can be made.
4.4 Interrup ting a Copy Job 4 4-13 Useful Ope rations Ch apter 4 2 Press the [Int errupt] ke y in the control panel. The indicator on the [Interrupt] key light s up, and the message “ Now in Interr upt mode. ” appears. 3 Load the document to be copied, and then specify the necessary co py settings.
4 4.4 Interru pting a Cop y Job 4-14 Useful Ope rations Ch apter 4 4 Press the [Start] key in the control panel. After the document is scann ed, the job cur- rently being printed is pause d, and the job that printing was inte rrupted for is printed.
4.4 Interrup ting a Copy Job 4 4-15 Useful Ope rations Ch apter 4 ✎ Additional I nformation If the [In terrupt] key is not pressed after the inter- rupting copy job is finished, the indicat or on th.
4 4.4 Interru pting a Cop y Job 4-16 Useful Ope rations Ch apter 4.
Specif ying Co py Setti ngs Chapter 5 5 5 Specifying Copy Settings This chapter describes t he proce- dures for specifying the various copy settings..
5 5.1 Selec ting a Color Sett ing 5-2 Specif ying Co py Setti ngs Chapter 5 5.1 Sel ecting a Color Setti ng } Reference For details, re fer to “ Selecting a C o lor Setting ” on page 3-5 of th e User ’ s Guide. Four Color sett ings are available for making copi es: “ Auto Color ” , “ Full Color ” , “ Bla ck ” and “ 2 Color ” .
5.1 Selecti ng a Color Setting 5 5-3 Specif ying Co py Setti ngs Chapter 5 2 Select the desi red Color setting. The selected Colo r setting is appli ed. ✎ Addi tiona l Inform ation To produce two-col or cop ies, touch [2 Color], touch the key for the color th at will be used for reproducing the color areas, and t hen touch [Enter].
5 5.2 Selec ting Output Settin gs 5-4 Specif ying Co py Setti ngs Chapter 5 5.2 Selecting Output Settings } Reference For details, refer to “ Selecting Output Settings ” on page 3- 8 of the User ’ s Guide. Various settings are ava ilable for sorting and finish- ing copies when they are fed into the copy output tray.
5.2 Selecti ng Outpu t Settings 5 5-5 Specif ying Co py Setti ngs Chapter 5 To specify Output settings 1 Touch [Basic], t hen [Output]. 2 Select the desi red Output settings.
5 5.2 Selec ting Output Settin gs 5-6 Specif ying Co py Setti ngs Chapter 5 ✎ Additional Infor mation To change the position of the punched holes or stapl es with the “ 2 Staples ” sett ing, tou.
5.3 Specify ing a Zoom Setti ng 5 5-7 Specif ying Co py Setti ngs Chapter 5 5.3 Specifying a Zoom Setting } Reference Fo r details, r efer to “ Specifying a Zoom Setting ” on page 3-13 of the User ’ s Gui de.
5 5.3 Speci fying a Zoom Setting 5-8 Specif ying Co py Setti ngs Chapter 5 To specify a Zoo m setting 1 Touch [Basic], the n [Zoom]. 2 Select t he desired Zoom se tting.
5.3 Specify ing a Zoom Setti ng 5 5-9 Specif ying Co py Setti ngs Chapter 5 ✎ Additional I nformation If [ × 1.0] was selected in step 2, copies of the same size as the document will be pri nted. If [Minimal] was selected in step 2, a slight ly re- duced copy of the original will be printed.
5 5.3 Speci fying a Zoom Setting 5-10 Specif ying Co py Setti ngs Chapter 5 To specify a zoom ratio 1 Touch [Basic], the n [Zoom]. 2 Touch and to specify t he desired zoom ratio (between 0.250 and 4.000). ❍ The repeat f eature for a key starts when a key in the touch panel is held down.
5.3 Specify ing a Zoom Setti ng 5 5-11 Specif ying Co py Setti ngs Chapter 5 To select the “ Auto Zoo m ” setting 1 Touch [Basic], then [Zoom] . 2 Touch [Auto Zoom].
5 5.3 Speci fying a Zoom Setting 5-12 Specif ying Co py Setti ngs Chapter 5 3 Select t he paper drawer loaded with paper of the desired copy size. The “ Auto Zoo m ” setting is applied.
5.3 Specify ing a Zoom Setti ng 5 5-13 Specif ying Co py Setti ngs Chapter 5 To specify a Reduce or Enlarge setting 1 Touch [Basic], then [Zoom] . 2 Touch [Reduce] or [E nlarge].
5 5.3 Speci fying a Zoom Setting 5-14 Specif ying Co py Setti ngs Chapter 5 3 Select the desired zoom rat io, and then touch [Enter] (As an example, the following scr een shows the setti ng [Legal Ö Letter] selected on t he Reduce screen.). The specified red uction or enlargement zoom ratio is applied.
5.3 Specify ing a Zoom Setti ng 5 5-15 Specif ying Co py Setti ngs Chapter 5 To specify a manua l zoom ratio 1 Touch [Basic], then [Zoom] . 2 Touch [Manual Zoom].
5 5.3 Speci fying a Zoom Setting 5-16 Specif ying Co py Setti ngs Chapter 5 3 Press the [C] (clear) ke y, and then use the keypad to type in the desired zoom ratio (be- tween 0.250 and 4.000). (As an example, the following scr een shows a speci fied setting of 3.
5.3 Specify ing a Zoom Setti ng 5 5-17 Specif ying Co py Setti ngs Chapter 5 To store a man ual zoom ratio 1 Touch [Basic], then [Zoom] . 2 Touch [Manual Zoom], and then touch [Zoom Inpu t].
5 5.3 Speci fying a Zoom Setting 5-18 Specif ying Co py Setti ngs Chapter 5 3 Press the [C] (clear) ke y, and then use the keypad to type in the desired zoom ratio (be- tween 0.250 and 4.000). (As an example, the following scr een shows a sp ecified of 2 .
5.3 Specify ing a Zoom Setti ng 5 5-19 Specif ying Co py Setti ngs Chapter 5 To recall a stor ed manual zoom ratio 1 Touch [Basic], then [Zoom] . 2 Touch [Manual Zoom]. 3 Touch , or [Minimal]. (As an example, the followin g screen shows stored settings of 0.
5 5.3 Speci fying a Zoom Setting 5-20 Specif ying Co py Setti ngs Chapter 5 4 Touch [Enter]. The stored zoom ratio is recalled ..
5.3 Specify ing a Zoom Setti ng 5 5-21 Specif ying Co py Setti ngs Chapter 5 To specify different vertic al and horizon- tal scaling proportions (X/Y Zoom se t- tings) 1 Touch [Basic], then [Zoom] .
5 5.3 Speci fying a Zoom Setting 5-22 Specif ying Co py Setti ngs Chapter 5 4 Using the keypad, type in t he desired length of side X (between 0.250 and 4.0 00). 5 Touch , and then use the keypad to type in the desired l ength of sid e Y (between 0.250 and 4.
5.4 Selecti ng a Paper Setti ng 5 5-23 Specif ying Co py Setti ngs Chapter 5 5.4 Selecting a Paper Setting } Reference Fo r deta ils, re fer to “ Selecting a Paper/Size Set- ting ” on pa ge 3-18 of the User ’ s Guid e. The paper drawer specif ied with paper of the de- sired size can be selected.
5 5.4 Selec ting a Paper Sett ing 5-24 Specif ying Co py Setti ngs Chapter 5 To select the Paper setting 1 Touch [Basic], the n [Paper/Size]..
5.4 Selecti ng a Paper Setti ng 5 5-25 Specif ying Co py Setti ngs Chapter 5 2 Select the paper drawer specifi ed with pa- per of the desired size. The selected Paper setting is applied.
5 5.5 Selecti ng Origi nal Setting 5-26 Specif ying Co py Setti ngs Chapter 5 5.5 Selecting Origi nal Setting } Reference For details, refer to “ Selecting Original Settings ” on page 3- 27 of th e User ’ s Gu ide. A setting correspond ing to the type of origin al being copied can be selected.
5.5 Selecti ng Origi nal Setting 5 5-27 Specif ying Co py Setti ngs Chapter 5 To select an Origina l setting 1 Touch [Orig Ö Copy], and then touch [O rigi- nal] . 2 Touch [1] or [2], de pending on the loaded docume nt, and then touch [Original Direc- tion].
5 5.5 Selecti ng Origi nal Setting 5-28 Specif ying Co py Setti ngs Chapter 5 3 Touch the key for the appropria te document orientation, and then touch [Enter]. ❍ If the orientation of the document is differ- ent from that of t he selected Original Di- rection setti ng, 2in1 copies will not be printed correctly.
5.5 Selecti ng Origi nal Setting 5 5-29 Specif ying Co py Setti ngs Chapter 5 6 Touch [Enter ]. The selected Original settings are app lied..
5 5.6 S electi ng Copy Setting s 5-30 Specif ying Co py Setti ngs Chapter 5 5.6 Selecting Copy Settings } Reference For details, refer to “ Select ing Copy Sett ings ” on page 3-37 of the User ’ s Guide. The desired type of copy can be specified.
5.6 Selecti ng Copy Settin gs 5 5-31 Specif ying Co py Setti ngs Chapter 5 To select a Cop y setting 1 Touch [Orig Ö Copy], a nd then touch [Copy] . 2 Select the de sired Copy setting.
5 5.6 S electi ng Copy Setting s 5-32 Specif ying Co py Setti ngs Chapter 5 ✎ Additional Info rmation To specify the position of the bind ing margin, touch [Binding Direct ion] in step 2, and then se- lect the desir ed setting. 3 Touch [Enter]. The selected Copy setti ng is applied.
5.7 Selecti ng a Photo/D ensity Setting 5 5-33 Specif ying Co py Setti ngs Chapter 5 5.7 Selecting a Photo/D ensity Set- ting } Reference Fo r deta ils, re fer to “ Selecting Photo/Densi ty Settings ” on page 3-45 of th e User ’ s Guide. The image quality of the origina l can be specified.
5 5.7 Selec ting a Photo/D ensity Setting 5-34 Specif ying Co py Setti ngs Chapter 5 To select an Original Image T ype setting 1 Touch [Photo/Density], and t hen touch [Original Image Type]. 2 Select the Ori ginal Image Type setting ap- propriate f or the docu ment to be copied.
5.7 Selecti ng a Photo/D ensity Setting 5 5-35 Specif ying Co py Setti ngs Chapter 5 ✎ Addi tiona l Inform ation If [Text & Photo], [Print ed Image], [Pho to Pa- per], or [Copi ed Paper] was select ed in step 3, the Scr een Pattern set tings are available.
5 5.7 Selec ting a Photo/D ensity Setting 5-36 Specif ying Co py Setti ngs Chapter 5 3 Touch [Enter]. The selected Origi nal Image Type setting is applied.
5.7 Selecti ng a Photo/D ensity Setting 5 5-37 Specif ying Co py Setti ngs Chapter 5 To select the Backgro und, Density, Text Enhancement and “ Glossy Mode ” set- tings 1 Touch [Photo/Densit y].
5 5.7 Selec ting a Photo/D ensity Setting 5-38 Specif ying Co py Setti ngs Chapter 5 ❍ To automatically set the den sity of the background color, touch [Backg round], and then touch [Auto ]. ❍ To specify the density of the copy, touch [Density], a nd then touch t he Lighter and Darker keys to adjust the Density setting.
5.7 Selecti ng a Photo/D ensity Setting 5 5-39 Specif ying Co py Setti ngs Chapter 5 ❍ For documents consistin g of text that overlaps images suc h as illustrations or graphs (text with a background), t ouch [Text Enhancemen t], and then touch or to select the desired text densi ty level.
5 5.8 Ch ecking the Settin gs 5-40 Specif ying Co py Setti ngs Chapter 5 5.8 Checking th e Settings Press the [Mode Check] key in the control pan el to display the screens that show the current co py set- tings. From these screens, the copy settings can also be changed.
5.8 Checki ng the Settings 5 5-41 Specif ying Co py Setti ngs Chapter 5 2 Touch [Next]. The second screen showin g the curren t set- tings appear s. 3 Touch [Next].
5 5.8 Ch ecking the Settin gs 5-42 Specif ying Co py Setti ngs Chapter 5 4 Touch [Next]. The fourth scr een showing the current set- tings appears. 5 Touch [Next].
5.8 Checki ng the Settings 5 5-43 Specif ying Co py Setti ngs Chapter 5 ✎ Additional I nformation If the [Text] was se lected on the Original Image Type screen, the screen shown below appears in step 5.
5 5.8 Ch ecking the Settin gs 5-44 Specif ying Co py Setti ngs Chapter 5 To change the settings 1 Press the [Mode Check] key in t he control panel. 2 Touch [Next] o r [Previo us] until t he screen containing the set ting that you wish to change appears.
Access ibility Mode O perations Ch apter 6 6 6 Accessibility Mode Operations This chapter provi des information on the Accessibility mode function s..
6 6.1 Settin g the “ Key Repe at St art/Interval ” Funct ion 6-2 Access ibility Mode O perations Ch apter 6 6.1 Setting the “ Key R epeat Start/In- terval ” Functio n If or is kept pre ssed when specifying a zoom ratio, the zoom rati o continues to increase or decrease.
6.1 Setting the “ Key Rep eat Start/Interva l ” Function 6 6-3 Access ibility Mode O perations Ch apter 6 To specify the key rep eat start time and key repeat interval The settings fo r the key repeat st art time and key re- peat int erval can be chang ed.
6 6.1 Settin g the “ Key Repe at St art/Interval ” Funct ion 6-4 Access ibility Mode O perations Ch apter 6 3 Touch and to specify the desired Time to St art setting (key repeat start time) and Inte rval setting (r epeat inte rval), and then touch [Ent er].
6.2 Setting the “ Enlarge-Display Notice ” Function 6 6-5 Access ibility Mode O perations Ch apter 6 6.2 Setting the “ Enlarge-Display No- tice ” Functio n When the panel reset t imer operation is performed, a message requesting co nfirmation to can cel the Enlarge Display mode can be displayed.
6 6.2 Settin g the “ Enlarge-Di splay Noti ce ” Function 6-6 Access ibility Mode O perations Ch apter 6 To specify whether the confirmation me s- sage for cancelin g the Enlarge Display mode app ears 1 Press the [Accessibility] k e y in the control panel.
6.2 Setting the “ Enlarge-Display Notice ” Function 6 6-7 Access ibility Mode O perations Ch apter 6 3 Select whether the confirmat ion message for canceling the Enlarge Display mo de ap- pears and specify how long the messa ge is displ ayed, and then tou ch [Enter].
6 6.2 Settin g the “ Enlarge-Di splay Noti ce ” Function 6-8 Access ibility Mode O perations Ch apter 6 Operations for the confirmation message for canceling the Enlarge Display mod e ✚ To continue specifying settings using the Enlarge Display mode, tou ch [Yes].
6.2 Setting the “ Enlarge-Display Notice ” Function 6 6-9 Access ibility Mode O perations Ch apter 6 Outline of the Confirma tion to Cancel the Enlarge Display Mode The following diagram shows when the message requesti ng confirmation to cancel the Enlarge Dis- play mode appear s if the “ Panel Reset Timer ” func- tion is set to “ 1 min.
6 6.2 Settin g the “ Enlarge-Di splay Noti ce ” Function 6-10 Access ibility Mode O perations Ch apter 6.
Managin g Jobs Chap ter 7 7 7 Managing Jobs This chapter provi des information on managing jobs..
7 7.1 Ove rview of Jo bs 7-2 Managin g Jobs Chap ter 7 7.1 Overview of Jobs } Reference For details, refer to “ Overview of Jobs ” on page 8-2 of the User ’ s Guide.
7.2 Disp laying the J ob List Scre en 7 7-3 Managin g Jobs Chap ter 7 7.2 Displaying the Jo b List Screen 1 Load the document to be copied, and then press th e [ Start] key in the control pane l. When a job has been q ueued, appears in the Basic screen.
7 7.3 Dele ting a Job 7-4 Managin g Jobs Chap ter 7 7.3 Del eting a Job For details, refe r to “ Overview of Jobs ” on page 8-2 of the User ’ s Guide. To delete a q ueued job Jobs listed as “ Waiting Print ” can be deleted. 1 While a job is being printed, touch in the Basic screen.
7.3 Deletin g a Jo b 7 7-5 Managin g Jobs Chap ter 7 2 Select th e job that you wish to delete, an d then touch [Delete] . The queued job is deleted ..
7 7.3 Dele ting a Job 7-6 Managin g Jobs Chap ter 7 To delete a jo b that is being pr inted 1 While the job is being printe d, press the [Stop] key in th e control panel. The message “ Job has been stopped. To resume job press the Start key. ” appears.
7.3 Deletin g a Jo b 7 7-7 Managin g Jobs Chap ter 7 3 Select th e job that you wish to delete, an d then touch [Delete] . The message “ Jo b has been don e improp- erly. Ch eck the record. ” appears. 4 Touch [Enter], and then press the [Start ] key in the control panel.
7 7.4 Jo b List Screen s 7-8 Managin g Jobs Chap ter 7 7.4 Job List Screens } Reference For details, refer to “ Job Log Screens ” on page 8-4 of th e User ’ s Guide. If in the Basi c screen is touched while a job is being pr inted, the l ist of queu ed jobs and t heir de- tails can be viewed.
7.4 Job Li st Screens 7 7-9 Managin g Jobs Chap ter 7 Active Scans sc r ee n Touch [Active Scans] in t he Job List screen to dis- play a list of jobs bein g scanned or que ued to be scanned in Scan mode. } Reference For details on the Scan mode, refer to the KM- C2230 Printer Controller User ’ s Guide.
7 7.4 Jo b List Screen s 7-10 Managin g Jobs Chap ter 7 Stocked List screen Touch [Stocke d List] in the Job List screen to dis- play a list of jobs stored in t he memor y.
7.4 Job Li st Screens 7 7-11 Managin g Jobs Chap ter 7 ✎ Additional I nformation Stored jobs cannot be deleted (printed) f rom the Stocked List screen in Enlar ge Display mode. To delete a stored j ob, cancel Enlarge Display mode, and then perf orm the operation from the Job Control screen.
7 7.4 Jo b List Screen s 7-12 Managin g Jobs Chap ter 7 Locked List screen Touch [Locked List] in the Job List screen to display a list of jobs that are locked and ca nnot be printed. } Reference For details on the “ Locked Job ” funct ion, refer to the KM-C2230 Printer Controller User ’ s Guide.
7.4 Job Li st Screens 7 7-13 Managin g Jobs Chap ter 7 ✎ Additional I nformation Locked j obs cannot be deleted (p rinted) from the Locked List screen in Enlarge Display m ode. To unlock a job, cancel Enlarge Display mode, and then perform the op eration from the Job Control screen.
7 7.4 Jo b List Screen s 7-14 Managin g Jobs Chap ter 7 Print Log screen Touch [Print Log] in the Job List screen to display a list of jo bs that have been printed an d those tha t have been deleted. ➜ To view a list of completed print jobs, touch [Fin- ished Jobs].
7.4 Job Li st Screens 7 7-15 Managin g Jobs Chap ter 7 Scan Log screen Touch [Scan Log] in the Job List screen to display a list o f jobs that have been scanned in Scan mode. ➜ To view a list of completed sca n jobs, touch [Fin- ished Jobs]. ➜ To view a list of scan jobs that have been delet ed after being queue d, touch [Deleted Jobs] .
7 7.4 Jo b List Screen s 7-16 Managin g Jobs Chap ter 7.
© 2004 http://www.kyoceramita.com @@@@ is a trademark of Kyocera Corporation 2004. 5 4036-7797-01.
Een belangrijk punt na aankoop van elk apparaat Kyocera KM-C2230 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Kyocera KM-C2230 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Kyocera KM-C2230 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Kyocera KM-C2230 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Kyocera KM-C2230 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Kyocera KM-C2230 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Kyocera KM-C2230 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Kyocera KM-C2230 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
