Gebruiksaanwijzing /service van het product WS-7078TWC van de fabrikant La Crosse Technology
Ga naar pagina of 23
WS-7078UF Wireless 433 MHz Radio-controlled Weather Station Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 4 Quick Set-Up Guide 5 Detailed Set-Up Guide Battery Installation 6 Program Mode Function Keys 7 12/24 hour Time .
3 INVENTORY OF CONTENTS 1. The indoor weather station (Fi gure 1). 2. One TX4U remote therm o/hygro sensor with m ounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive t ape. 5. Instruction m anual and warranty card.
4 continually measuring every second, of every day, to an accuracy of ten billionths of a second per day. These physicists have created an i nternational standard, measuring a second as 9,192,631,770 vibrations of a Cesium-133 at om in a vacuum. For more informat ion about WWVB please see the NIST website at http://www.
5 Note: The Thermo Hygro Transmitter transmits a signal every 3 minutes; after the batteries ha ve been installed, th e Weather Station will search for the signal for a duration of 5 minutes.
6 the time signal (reception is achieved ea siest at night), it will display the correct time (factory setting is Ea stern time zone). PROGRAM MODE Programming Note: If 30 seconds is allowed to pass, .
7 2. Press and release the “CH” button to toggle between 12 and 24-hour time. 3. Press and release the “SET” button to confirm the 12/24-hour time setting and to advan ce to Time Zone Setting. B. Time Zone Setting The default tim e zone is EST, “-5hr ” (Eastern Standard Time), to change this setting : 1.
8 5. Press and release the “SET” button to confirm your selection and advance to the Daylight Savi ng Time setti ng. C. Daylight Saving Time(DST) Setting 1. Press and hold the “SET” button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD.
9 WWVB search every night between these hours and overrides any manually set time. The WW VB tower icon (ap pearing in the TIME LCD) will flash when a signal-search is in progress, will remain steady when the signal has been received, and nothing will be displayed in all o ther situations.
10 for the year. The day, date, and year w ill be automatically set once the WWVB signal is received. However, the day, date, and year can be manually set and will flash resp ectively in the DATE LCD during manual programmi ng. 1. Press and hold the “SET” button for 3 seconds, or until “12h” or “24h” flashes in the DATE LCD.
11 G. Setting the LCD Contrast Note: There are 8 LCD contrast levels to choose from, “Lcd 0” is the lightest and “Lcd 7” is the darkest. 1. Press and hold the “SET” button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD.
12 I. Weather Forecast The weather forecasting feature is estimated to be 75% accurate. The weather forecast is based solely upon th e change of air pressure over time.
13 Sunny —indicates that the weather is expected to improve (not that the weather will be sun n y). Sun with Clouds —indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Clouds with Rain —indicates that the weather is expected to get worse (not that the weath er will be rainy).
14 The outdoor temperat ure and humidity i s viewed in the OUTDOOR LCD. When there is more than one remote thermo/hygro sensor unit in operation a “boxed” number will appear to the right of the temperature. This indicates which remote thermo/hygro sen sor unit (1, 2, or 3) is currently displaying its dat a in the OUTDOOR LCD.
15 Note: Waiting 20 seconds during either the m inim um or the maximum readings will automatica lly return the indoor weather station to the current t emperature and humi dity readings.
16 1. Press and hold the “AL1” button for 5 seconds or until the alarm-time display fl ashes in the DATE LCD. 2. Press and release the “IN” button to set the alarm hours.
17 The WS-7078UF is able to receive si gnals from as many as 3 different remote thermo/hygro sensors. The remote sensor model(s) that you choose will come with their own set o f instructions, follo w these instructions fo r a complete guide to setting up .
18 by the “boxed” number), then press and release the “OUT” button. 3. Pressing and releasing the “OUT” button once will display the minim um tem perature and the date and tim e the data was recorded.
19 3. Through the 2 screw holes of the bracket mark the m ounting surface with a pencil. 4. Where marked, start the screw hol es using the provided screws. 5. Remove screws from the m ounting surface. 6. Align the m ounting bracket with the start ed screw holes.
20 1. Using the Table Stand a. The indoor weather station comes wit h the table stand already mounted. If you wish to use the table-st and all that is requi red is to place the indoor weather station in an appropriate location. 2. WALL MOUNTING a. Remove the table-st and.
21 2) Place remote thermo/hygro sensor closer to display. 3) Be sure all batteries are fresh. NOTE: For problems not solved, please contact La Crosse Technology. MAINTENANCE AND CARE INSTRUCTIONS • Extreme tem peratures, vibration, and shock should be avoided to prevent damage to the units.
22 Sensor): Outdoor Temperature and humidity reception (Indoor Weather Station) : Every 3 minut es. Transmission Range: 80 feet (in open space). Power Supply: Indoor Weather Station: 2 x AA, IEC LR6, 1.5V. Remote Therm o/hygro Sensor: 2 x AA, IEC LR3, 1.
23 This warranty gives you specific le gal rights. You may also have other rights specific to your State. So me States do no allow the exclusion of consequential or incidental dam ages therefore the above exclusion of lim itation m ay not apply t o you.
Een belangrijk punt na aankoop van elk apparaat La Crosse Technology WS-7078TWC (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen La Crosse Technology WS-7078TWC heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens La Crosse Technology WS-7078TWC vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding La Crosse Technology WS-7078TWC leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over La Crosse Technology WS-7078TWC krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van La Crosse Technology WS-7078TWC bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de La Crosse Technology WS-7078TWC kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met La Crosse Technology WS-7078TWC . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
