Gebruiksaanwijzing /service van het product Disto D510 van de fabrikant Leica
Ga naar pagina of 31
Leica DISTO TM X310 The original laser distance meter Leica DISTO TM D510 The original laser distance meter Leica DISTO TM D510 The original laser distance meter.
Leica DISTO TM D510 792312 1 EN Table of Contents Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -.
Leica DISTO TM D510 792312 2 EN Instrument Set-up Introduction The safety instructions and the user manual should be read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them.
Leica DISTO TM D510 792312 3 EN Instrument Set-up Basic measuring screen Status bar Favorites Main line Active function Selection screen Page indicato r Settings Function / Settings Help function.
Leica DISTO TM D510 792312 4 EN Instrument Set-up Pointfinder (Viewscreen) 1x Zoom stage Favorites Illumination adjustment with navigation keys left and right Active function Zoom (1x, 2x, 4x) with navigation keys up and down Crosshair Insert batteries i To ensure a reliable use, do not use zinc- carbon batteries.
Leica DISTO TM D510 792312 5 EN Operations Switching ON/OFF Clear Message Codes ON OFF 2 sec Device is turned OFF. i Press ON button 2 sec to start continuous laser mode. If no key is pressed for 180 sec, the device switches off au- tomatically. 1x Undo last action.
Leica DISTO TM D510 792312 6 EN Operations Add / Subtract 7.332 m 1 The next meas- urement is added to the previous one. 2 The next meas- urement is sub- tracted from the previous one. 2x 7.332 m 12.847 m 3 20.179 m 4 i This process can be repeated as required.
Leica DISTO TM D510 792312 7 EN Settings Overview 1 2 Tilt units Distance units Beep Digital level Keypad lock Favorites Illumination Bluethooth ® Tilt calibra tion Reset Offset Tilt uni ts 1 2 ± 90.0° ± 180.0° 360.0° 0.00 % 0.0 mm/m 0.00 in/ft Switch between the following units: 3 4 Confirm setting.
Leica DISTO TM D510 792312 8 EN Settings Distance units 1 2 0.0000 m 0.000 m 0.00 m 0 mm 0.00 ft 0'00" 1/32 0.00 in 0 in 1/32 0.000 yd Switch between the following units: 3 4 Confirm setting. Exit sett ings. 5 Beep ON/OFF 1 ON 2 To switch ON, repeat procedure.
Leica DISTO TM D510 792312 9 EN Settings De-/Activate keypad lock Unlock keypad 1 OFF 2 To deactivate, repeat procedure. ON Exit sett ings. 3 1 withi n 2 sec 2 Personalized favorites 1 2 3 Select favorite function. 4 Press selection key left or r ight.
Leica DISTO TM D510 792312 10 EN Settings De-/Activate Bluet ooth Smart 1 ON 2 To switch ON, repeat procedure. OFF Exit sett ings. 3 i Default mode: Bluetooth is swit ched on. Bluetooth icon in status line is dis - played if device is connected with Bluetooth.
Leica DISTO TM D510 792312 11 EN Settings Calibration of tilt se nsor (Tilt Calibration) 1 2 3 Place device on absolutely flat s urface. 180° 4 180° 5 Turn the device ho rizontally by 180° and place it again on absolutely flat surface. 6 7 Place device on absolutely flat s urface.
Leica DISTO TM D510 792312 12 EN Settings Reset 1 Reset device? 2 Second confirmation with selection keys: 3 Refuse: Confirm: Exit sett ings. 4 i Reset returns the instrum ent to the factory settings. Al l custom- ized settings and memories are lost. Offset 1 2 1.
Leica DISTO TM D510 792312 13 EN Functions Overview Timer Calculator Adjusting measur ing reference Memory Single Distance Measurement Smart Hor izontal Mo de Area Volume Triangl e area Long Range Mod.
Leica DISTO TM D510 792312 14 EN Functions Adjusting measuring reference/tripod 1 2 3 Distance is measured from the rear of the device (standard setting). Distance is me asured from th e front of the device (lock symbol = permanently). Distance is measured from the tripod thread permanently.
Leica DISTO TM D510 792312 15 EN Functions Measuring single distance 1 2 Aim active laser at target. 3 8.532 m 4 i Target surfaces: Measuring errors can occur when measuring to colour less liquids, glass, styrofoam or semi-per mea- ble surfaces or when aiming at high gloss surfaces.
Leica DISTO TM D510 792312 16 EN Functions Height-profile measurement 1 2 REF 0 Aim at reference point (REF). 3 4 REF 1 0 2 3 4 5 h d Aim at additional points 1-x. 5 d h 2.042 m 0.054 m Horizontal distance to device Height difference to reference point (REF).
Leica DISTO TM D510 792312 17 EN Functions Area 1 2 3 Aim laser at first target point. 4 5 Aim laser at sec- ond target point. 20.276 m 3.9I0 m 6.228 m 24.352 m 2 First dist ance Second distance Circumference Area 6 i The result is sh own in the ma in line and the measured value above.
Leica DISTO TM D510 792312 18 EN Functions Volume 1 2 3 Aim laser at first target point. 4 5 Aim laser at sec- ond target point. 6 7 Aim laser at third target point. 24.224 m 2 208.703 m 2 80.208 m 78.694 m 3 Circumference Wall areas Ceiling/floor area Volume 8 9 Use Up/Down navigation keys to show more re- sults.
Leica DISTO TM D510 792312 19 EN Functions Triangular area 1 2 3 Aim laser at first target point. 4 5 Aim laser at sec- ond target point. 6 7 Aim laser at third target point. 89.90° 23.563 m 23.813 m 2 Circumference Angle between first and second measurement Triangular area 8 9 Use Up/Down navigation keys to show more re- sults.
Leica DISTO TM D510 792312 20 EN Functions Inclination trac king 1 2 89.3° 90° 0° 3 i Inclination is perm anently displayed. Instrument beeps at 0° and 90°. Ideal for horizontal or ve rtical adjustments. Sloped objects 1 2 3 Aim laser at upper ta rget point.
Leica DISTO TM D510 792312 21 EN Functions Height tracking 1 2 P0 Px Aim laser at lo w- er poin t. 3 4 P0 Px Aim laser at upper points and angle/ height tracking starts au tomatically. 5 x y x y 6.932 m 9.827 m P0 Px 6 = Tracking height if device is turned on trip od 7 Stops height tracking and displays last measurement.
Leica DISTO TM D510 792312 22 EN Functions Trapezium 1 2 3 Aim laser a t upper point. 4 5 Aim laser at 2nd point. x x 22.70 ° 5.907 m 78.257 m 2 6 Trapezium area 7 Use Up/Down navigation keys to show more re- sults.
Leica DISTO TM D510 792312 23 EN Functions Stake out i Two different distances (a and b) can be entered to mark off de- fined measured lengths. 1 2 3 a b b a = b 1 2 3 a b b a = b 1 2 1.012 m 3 Select digit. 1.012 m 4 Adjust digit. 5 Approve value "a".
Leica DISTO TM D510 792312 24 EN Functions Pythagoras (2-point) 1 2 3 Aim laser at firs t target. 4 5 Aim laser at second target. 8.294 m 6 7 Use Up/Down navigation keys to show more re- sults. i The result is shown in the main line. Pressing the measuring key fo r 2 sec in the function ac- tivates automatically Minimum or Ma ximum measure- ment.
Leica DISTO TM D510 792312 25 EN Functions Pythagoras (3-point) 1 2 3 Aim laser at first target. 4 5 Aim laser at sec- ond target. 6 7 Aim laser at third target. 18.294 m 8 9 Use Up/Down navigation keys to show more re- sults. i The result is shown in the main line.
Leica DISTO TM D510 792312 26 EN Technical Data * applies for 100 % target refl ectivity (white painted wall), low background illumination, 25 ºC ** applies for 10 to 100 % target reflectivity, hi gh background illumination, - 10 ºC to + 50 ºC *** Tolerances apply from 0.
Leica DISTO TM D510 792312 27 EN Message Codes If the message Error does not disappear after switching on the device repeatedly, contact the dealer. If the message InFo appears with a number, press the Clear button and observe the following instructions: Care • Clean the device with a damp, soft cloth.
Leica DISTO TM D510 792312 28 EN Safety Instructions Permitted use • Measuring distances • Tilt measurement • Data transfer with Bluetooth ® Prohibited use • Using the product without instruc.
Leica DISTO TM D510 792312 29 EN Safety Instructions Electromagnetic Compatibility (EMC) WARN ING The device conforms to the most stringent requirements of the relevant standards and regulations. Yet, the possibility of causing interference in other devices cannot be totally excluded.
Leica Geosystems AG CH-9435 Heerbrugg (Switzerland) www.disto.com Leica Geosystems AG, He erbrugg, Swit zerland has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Syst em s (ISO standard 9001) and Environ- mental Management Systems (ISO standard 14 001).
Een belangrijk punt na aankoop van elk apparaat Leica Disto D510 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Leica Disto D510 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Leica Disto D510 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Leica Disto D510 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Leica Disto D510 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Leica Disto D510 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Leica Disto D510 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Leica Disto D510 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
