Gebruiksaanwijzing /service van het product 8098 van de fabrikant Lenovo
Ga naar pagina of 352
Hard w ar e M a in t e n a n c e Ma nu a l Ty p e s 8095 , 809 8, 81 4 1 8 1 42, 81 4 3 Ty p e s 8 1 44 , 8 1 45, 8 1 46, 81 7 1 , 81 7 2 Ty p e s 81 7 3 , 84 2 0 , 84 2 1 , 84 2 2 , 84 2 3 Ty p e s 8.
.
Hard w ar e M a in t e n a n ce Ma nu a l Ty p e s 8095 , 809 8, 81 4 1 8 1 42, 81 4 3 Ty p e s 8 1 44 , 8 1 45, 8 1 46, 81 7 1 , 81 7 2 Ty p e s 81 7 3 , 84 2 0 , 84 2 1 , 84 2 2 , 84 2 3 Ty p e s 84.
Note: Before using this information and the pr oduct it supports, be sure to read the information under “Notices,” on page 343. Ninth Edition (March 2008) © Copyright Lenovo 2005, 2008. Portions © Copyright International Business Machines Corporation 2005.
Contents Chapter 1. About this manual . . . . .1 Important Safety Information . . . . . . . . .1 Strategy for replacing FRUs for CT O, CMV , and GA V products . . . . . . . . . . . . . . . .2 Product definition . . . . . . . . . . .2 FRU Identification for CTO, CMV , and GA V products .
Removing and replacing the diskette drive . . . 133 Removing and replacing the fan assembly . . . . 134 Replacing the cover and connecting the cables . . 135 Chapter 10. Replacing FRUs (T ypes 8098, 8171, 8172, 8173, 8424, and 8425) . . . . . . . . . .
Chapter 1. About this manual This manual contains service and refer ence information for ThinkCentre ® computers listed on the cover . It is intended only for trained servicers who are familiar with Lenovo ® computer products. Before servicing a Lenovo pr oduct, be sure to read the Safety Information.
Strategy for replacing FRUs for CTO, CMV , and GA V products Product definition Dynamic Configure To Order (CTO) This provides the ability for a customer to configur e a Lenovo solution from an eSite, and have this configuration sent to fulfillment, wher e it is built and shipped directly to the customer .
4. Under W arranty Information, type the MT and Serial number and click Submit . The list of key commodities is returned in the PEW r ecord under Component Information. v Business Partners using Eclaim will access PEW when performing Entitlement Lookup.
So, if the parts are not compliant originally , replacement parts can also be noncompliant, but in all cases, if the parts are compliant, the replacement parts must also be compliant.
Chapter 2. Safety information This chapter contains the safety information that you need to be familiar with before servicing a computer . General safety Follow these rules to ensur e general safety: v Observe good housekeeping in the area of the machines during and after maintenance.
CAUTION: Electrical current from power , telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the server/workstation covers, unless instructed otherwise in the installation and configuration procedures.
v Always look carefully for possible hazar ds in your work area. Examples of these hazards ar e moist floors, nongrounded power extension cables, power surges, and missing safety grounds. v Do not touch live electrical circuits with the r eflective surface of a plastic dental mirror .
5. Check for any obvious alterations. Use good judgment as to the safety of any alterations. 6. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 7.
Safety notices (multi-lingual translations) The caution and danger safety notices in this section are pr ovided in the following languages: v English v Arabic v Brazilian/Portuguese v Chinese (simplif.
CAUTION: When replacing the lithium battery , use only Part Number 33F8354 or an equivalent type battery recommended by the manufacturer . If your system has a module containing a lithium battery , replace it only with the same module type made by the same manufacturer .
CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
12 Hardwar e Maintenance Manual.
Chapter 2. Safety information 13.
≥ 18 kg (37 lbs) ≥ 32 kg (70.5 lbs) ≥ 55 kg (121.2 lbs) 1 2 14 Hardwar e Maintenance Manual.
PERIGO A corrente elétrica pr oveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: v Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste pr oduto durante uma tempestade com raios.
CUIDADO: Ao substituir a bateria de lítio, utilize apenas uma bateria com Número de Peça 33F8354 ou um tipo de bateria equivalente recomendado pelo Se o seu sistema possui um módulo com uma bateria de lítio, substitua-o apenas por um módulo do mesmo tipo e do mesmo fabricante.
CUIDADO: O botão de controle de alimentação do dispositivo e o botão para ligar/desligar da fonte de alimentação não desligam a corrente elétrica fornecida ao dispositivo.
18 Hardwar e Maintenance Manual.
1 2 Chapter 2. Safety information 19.
20 Hardwar e Maintenance Manual.
Chapter 2. Safety information 21.
1 2 22 Hardwar e Maintenance Manual.
DANGER Le courant électrique provenant de l’alimentation, du téléphone et des câbles de transmission peut présenter un danger . Pour éviter tout risque de choc électrique : v Ne manipulez aucun câble et n’effectuez aucune opération d’installation, d’entretien ou de r econfiguration de ce produit au cours d’un orage.
A TTENTION: Remplacer la pile au lithium usagée par une pile de référence identique exclusivement, (référence 33F8354), ou suivre les instructions du fabricant qui en définit les équivalences.
≥ 18 kg (37 lbs) ≥ 32 kg (70.5 lbs) ≥ 55 kg (121.2 lbs) A TTENTION: Soulevez la machine avec précaution. A TTENTION: L’interrupteur de contrôle d’alimentation de l’unité et l’interrupteur dubloc d’alimentation ne coupent pas le courant électrique alimentantl’unité.
VORSICHT An Netz-, T elefon- und Datenleitungen können gefährliche Spannungen anliegen. Aus Sicherheitsgründen: v Bei Gewitter an diesem Gerät keine Kabel anschließen oder lösen. Ferner keine Installations-, W artungs- oder Rekonfigurationsarbeiten durchführen.
CAUTION: Eine verbrauchte Lithiumbatterie nur durch eine Batterie mit der T eilenummer 33F8354 oder eine gleichwertige, vom Hersteller empfohlene Batterie ersetzen. Enthält das System ein Modul mit einer Lithiumbatterie, dieses nur durch ein Modul desselben T yps und von demselben Hersteller ersetzen.
≥ 18 kg ≥ 32 kg ≥ 55 kg ACHTUNG: Arbeitsschutzrichtlinien beim Anheben der Maschine beachten. ACHTUNG: Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein.
Chapter 2. Safety information 29.
30 Hardwar e Maintenance Manual.
1 2 Chapter 2. Safety information 31.
PERICOLO La corrente elettrica pr oveniente dai cavi di alimentazione, del telefono e di comunicazione può essere pericolosa. Per evitare il rischio di scosse elettriche: v Non collegare o scollegare qualsiasi cavo oppure effettuare l’installazione, la manutenzione o la riconfigurazione del prodotto durante un temporale.
A TTENZIONE: Quando si sostituisce la batteria al litio, utilizzare solo il Numero parte 33F8354 o un tipo di batteria equivalente consigliato dal produttore. Se sul sistema è presente un modulo che contiene una batteria al litio, sostituirlo solo con un tipo di modulo dello stesso tipo della stessa casa di produzione.
≥ 18 kg ≥ 32 kg ≥ 55 kg A TTENZIONE: Prestare attenzione nel sollevare l’apparecchiatura. A TTENZIONE: Il pulsante di controllo dell’alimentazione presente sull’unità e l’interruttore dell’alimentatore non disattivano l’alimentazione corrente fornita all’unità.
Chapter 2. Safety information 35.
1 2 36 Hardwar e Maintenance Manual.
Chapter 2. Safety information 37.
PELIGRO La corriente eléctrica procedente de cables de alimentación, teléfonos y cables de comunicación puede ser peligrosa. Para evitar el riesgo de descarga eléctrica: v No conecte ni desconecte los cables ni realice ninguna tarea de instalación, mantenimiento o reconfiguración de este producto durante una tormenta eléctrica.
PRECAUCIÓN: Cuando sustituya una batería de litio, utilice solamente una batería número de pieza 33F8354 u otra de tipo equivalente recomendada por el fabricante. Si su sistema dispone de un módulo que contiene una batería de litio, reemplácelo sólo con el mismo tipo de módulo, del mismo fabricante.
≥ 18 kg ≥ 32 kg ≥ 55 kg PRECAUCIÓN: Adopte procedimientos seguros al levantar el equipo. PRECAUCIÓN: El botón de control de alimentación del dispositivo y el interruptor de alimentación de la fuente de alimentación no desconectan la corriente eléctrica suministrada al dispositivo.
Chapter 3. General information This chapter provides general information that applies to all machine types supported by this publication. The Access IBM program Use the Access IBM ® program for general information about the use, operation, and maintenance of the computer .
T ypes 8095, 8096, 8141, 8142, 8145, 8420, and 8421 This section lists the physical specifications. Dimensions Height: 146 mm (5.7 in.) Width: 442 mm (17.
T ypes 8097, 8143, 8144, 8146, 8422, 8423 and 8427 This section lists the physical specifications. Dimensions Height: 492 mm (19.4 in.) W idth: 175 mm (6.9 in.) Depth: 450 mm (17.7 in.) W eight Minimum configuration: 10.5 kg (23 lb) Maximum configuration: 13.
T ypes 8098, 8171, 8172, 8173, 8424, and 8425 This section lists the physical specifications. Dimensions W idth: 12.2 inches (310 mm) Height: 3.35 inches (85 mm) Depth: 14.1 inches (358 mm) W eight Minimum configuration as shipped: 7.3 kg (16 lbs) Maximum configuration as shipped: 8.
Chapter 4. General Checkout Attention The drives in the computer you are servicing might have been r earranged or the drive startup sequence changed. Be extremely car eful during write operations such as copying, saving, or formatting. Data or programs can be overwritten if you select an incorrect drive.
d. Observe the LEDs and refer to the following table. Power LED Green diagnostic LED Y ellow diagnostic LED Action ON ON OFF This is the normal condition of the LEDs when the power is OK. OFF OFF OFF Make sure the power cor d is attached to a working electrical outlet.
1. Are the exact machine type and models 2. Have the same BIOS level 3. Have the same adapters/attachments in the same locations 4. Have the same address jumpers/terminators/cabling 5. Have the same software versions and levels 6. Have the same Diagnostics Diskette (version) 7.
48 Hardwar e Maintenance Manual.
Chapter 5. Diagnostics using PC-Doctor for DOS Diagnostics are pr ovided by the PC-Doctor program for DOS. These include a full range of diagnostic utilities to determine the operating condition of the computer ’s hardwar e components.
Starting PC-Doctor from a diagnostic diskette or CD-ROM Note: If your computer has no internal diskette drive, an external USB diskette drive is requir ed when using the diagnostic diskette. 1. If your computer is already on when you start this pr ocedure, shut down the operating system and turn off the computer .
T est selection To select one or more tests, use the following procedur e. 1. Open the corresponding test category . 2. Using the cursor movement keys, highlight the desired test. 3. Press the space bar . A selected test is marked by >> . Pressing the space bar again de-selects a test and removes the >>.
available for test, what tests are available for the device, device pr operties, and so on. To change testing parameters, you modify the FDA T .INI file in PC Doctor for DOS. FDA T consists of the following subtests and features. Fixed-Disk T ests: v Seek T ests: - checks the physical operation of the drive head.
channel buffer must be kept high in or der to maintain a speed advantage over other data transfer modes. In order to use the UDMA channel during testing, users must disable the multitasking feature. Destructive versus non-destructive testing: Most of the tests found in FDA T are non-destructive.
The Full Erase Hard Drive pr ovides a DOS utility that performs the following: v Performs all the steps in Quick Erase. v Provides a DOS utility that writes random data to all sectors of the har d drive. v Provides an estimate of time to completion along with a visual r epresentation of completion status.
Chapter 6. Using the Setup Utility The Setup Utility program is stor ed in the electrically erasable programmable read-only memory (EEPROM) of the computer . The Setup Utility program is used to view and change the configuration settings of the computer , regar dless of which operating system you are using.
Password considerations If you are setting any of the various types of passwor ds on your computer , you should read and understand the following information: v If you type an incorrect passwor d, you will see an error message. If you type an incorrect passwor d three consecutive times, you must turn the computer off and start again.
Attention Make sure that the IDE Drive Master passwor d is stored in a safe place. If both the IDE Drive User password and the IDE Drive Master passwor d are lost or forgotten, the IDE har d disk drive must be replaced.
Selecting a startup device If the computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as expected, use one of the following pr ocedures to select a startup device. Selecting a temporary startup device Use this procedur e to startup from any boot device.
Chapter 7. Symptom-to-FRU Index The Symptom-to-FRU index lists error symptoms and possible causes. The most likely cause is listed first. Always begin with Chapter 4, “General Checkout,” on page 45. This index can also be used to help you decide which FRUs to have available when servicing a computer .
1. T urn off the computer and disconnect all external devices. 2. Power-on the computer . 3. There ar e three LEDs to help you determine if the power supply and system board ar e working correctly . The power button LED is located on the front of the computer and the two diagnostic LEDs are located on the power supply at the rear of the computer .
Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See “Running diagnostics tests” on page 50 for the specific type for information about the Diagnostic programs. In the following index, X can repr esent any number .
Diagnostic Error Code FRU/Action 000-039-XXX BIOS DMI data error 1. Flash the system. See “Flash update procedures” on page 338 2. System board 000-195-XXX BIOS T est aborted by user Information only Re-start the test, if necessary 000-196-XXX BIOS test halt, error thr eshold exceeded 1.
Diagnostic Error Code FRU/Action 001-027-XXX System Configuration/Setup error 1. Run Setup 2. Flash the system. See “Flash update procedur es” on page 338 3. System board 001-032-XXX System Device Controller failur e System board 001-034-XXX System Device Buffer Allocation failur e 1.
Diagnostic Error Code FRU/Action 001-199-XXX System test failed, cause unknown 1. Go to “Undetermined problems” on page 90 2. Flash the system and re-test 3.
Diagnostic Error Code FRU/Action 001-281-XXX System IRQ14 (hard disk drive) failur e 1. Hard disk drive cable 2. Hard disk drive 3. System board 001-282-XXX System IRQ15 failure 1. Device on IRQ15 2. System board 001-286-XXX 001-287-XXX 001-288-XXX System T imer failure System board 001-292-XXX System CMOS RAM error 1.
Diagnostic Error Code FRU/Action 005-031-XXX V ideo Device Cable failure 1. V ideo cable 2. Monitor 3. V ideo card, if installed 4. System board 005-032-XXX V ideo Device Controller failur e 1. V ideo card, if installed 2. System board 005-036-XXX V ideo Register error 1.
Diagnostic Error Code FRU/Action 006-195-XXX Diskette interface T est aborted by user Information only Re-start the test, if necessary 006-196-XXX Diskette interface test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 006-197-XXX Diskette interface test warning 1.
Diagnostic Error Code FRU/Action 01 1-195-XXX Serial port T est aborted by user Information only Re-start the test, if necessary 01 1-196-XXX Serial port test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 01 1-197-XXX Serial port test warning 1.
Diagnostic Error Code FRU/Action 014-03X-XXX 014-04X-XXX Parallel port failure System board 014-195-XXX Parallel port T est aborted by user Information only Re-start the test, if necessary 014-196-XXX Parallel port test halt, error thr eshold exceeded 1.
Diagnostic Error Code FRU/Action 015-034-XXX USB port buffer allocation failure 1. Reboot the system 2. Flash the system and re-test. See “Flash update procedur es” on page 338 3. Run memory test 4. System board 015-035-XXX USB port Reset condition detected 1.
Diagnostic Error Code FRU/Action 018-196-XXX PCI Card test halt, err or threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 018-197-XXX PCI Card test warning 1. Make sure the component that is called out is connected and/or enabled.
Diagnostic Error Code FRU/Action 020-198-XXX PCI test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Flash the system and re-test. See “Flash update procedur es” on page 338 3.
Diagnostic Error Code FRU/Action 025-198-XXX IDE interface test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Flash the system and re-test. See “Flash update procedur es” on page 338 3.
Diagnostic Error Code FRU/Action 030-198-XXX SCSI interface test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Flash the system and re-test. See “Flash update procedur es” on page 338 3.
Diagnostic Error Code FRU/Action 071-00X-XXX 071-01X-XXX 071-02X-XXX Audio port error 1. Run Setup 2. Flash the system. See “Flash update procedur es” on page 338 3. System board 071-03X-XXX Audio port failure 1. Speakers 2. Microphone 3. Audio card, if installed 4.
Diagnostic Error Code FRU/Action 080-196-XXX Game Port interface test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 080-197-XXX Game Port interface test warning 1. Make sure the component that is called out is connected and/or enabled.
Diagnostic Error Code FRU/Action 086-197-XXX Mouse Port interface test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Re-run test 3. Replace the component that is called out in warning statement 4.
Diagnostic Error Code FRU/Action 170-0XX-XXX V oltage Sensor(s) failure 1. Flash system 2. System board 170-195-XXX V oltage Sensor(s) T est aborted by user Information only Re-start the test, if necessary 170-196-XXX V oltage Sensor(s) test halt, error threshold exceeded 1.
Diagnostic Error Code FRU/Action 175-197-XXX Thermal Sensor(s) test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Re-run test 3. Replace the component that is called out in warning statement 4.
Diagnostic Error Code FRU/Action 215-000-XXX CD-ROM Drive T est Passed No action 215-XXX-XXX CD-ROM Drive error 1. CD-ROM Drive Cable 2. Check power supply voltages 3. CD-ROM drive 4. System board 217-000-XXX Hard Disk Drive T est Passed No action 217-25X-XXX 217-26X-XXX Hard Disk Drive (IDE) err or 1.
Diagnostic Error Code FRU/Action 415-000-XXX Modem T est Passed No action 415-XXX-XXX Modem error Remove the Modem and re-test the system Chapter 7. Symptom-to-FRU Index 81.
Beep symptoms Beep symptoms are short tones or a series of short tones separated by pauses (intervals without sound). See the following examples. Beeps Description 1-2-X v One beep v A pause (or break) v Tw o beeps v A pause (or break) v Any number of breaks 4 Four continuous beeps Use the following table to diagnose beep symptoms.
Beep Symptom FRU/Action 2-2-4 CMOS configuration info validation failed 1. Battery 2. System Board 2-3-1 Screen initialization failed 1. Jumper on J28 2.
No-beep symptoms Symptom/Error FRU/Action No beep during POST but computer works correctly . System board No beep during POST . 1. See “Undetermined problems” on page 90. 2. System Board 3. Memory Module 4. Any Adapter or Device 5. Riser Card 6. Power Cord 7.
POST error codes Each time you power-on the system, it performs a series of tests that check the operation of the system and some options. This series of tests is called the Power-On Self-T est , or POST .
POST Error Code FRU/Action 191 System Security: Embedded Security hardwar e Reset If problem persists, r eplace the system board 192 System Security: Embedded Security hardwar e tamper detected If pro.
POST Error Code FRU/Action 1801 PCI/PnP Error! No Space A vailable to Shadow ROM 1. Run Setup and verify PCI/ISA configuration settings. 2. Run diagnostics. 3. Replace PCI Adapter 1802 PCI/PnP Error! Not Enough I/O Space A vailable 1. Run Setup and verify PCI/ISA configuration settings.
Miscellaneous error messages Message/Symptom FRU/Action CMOS Backup Battery inaccurate 1. CMOS Backup Battery (see Chapter 2, “Safety information,” on page 5) 2. System Board Changing colors Display/Monitor Computer will not power-of f. See “Power Supply Errors” on page 59.
Message/Symptom FRU/Action ″ Insert a Diskette ″ icon appears with a known-good diagnostics diskette in the first 3.5-inch diskette drive. 1. System Board 2. Diskette Drive Cable 3. Riser card 4. Network Adapter Intensity or color varies from left to right of characters and color bars 1.
Message/Symptom FRU/Action Some or all keys on the keyboard do not work 1. Keyboard 2. Keyboard Cable 3. System Board Undetermined problems Check the power supply voltages (see “Power Supply Errors” on page 59). If the voltages are corr ect, return here and continue with the following steps.
Chapter 8. Replacing FRUs (T ypes 8095, 8141, 8142, 8145, 8420, and 8421) FRU replacements ar e to be done by trained service technicians only . This chapter does not contain a remove and r eplace procedure for all FRUs. Only the major FRUs are documented in this manual.
Locating connectors on the rear of the computer The following illustration shows locations of connectors on the rear of the computer . 1 PCI connectors 9 Diagnostic LEDs 2 PCI Expres.
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes) from the drives, and turn of f all attached devices and the computer . 2. Unplug all power cords fr om electrical outlets. 3. Disconnect all cables attached to the computer .
Locating components *XXXXXXXXX* *XXXXXXXXX* 1 Power supply 5 PCI Express (x16) graphics PCI connector 2 Memory modules 6 Battery 3 PCI Express (x1) PCI connector 7 .
Identifying parts on the system board 1 12V power connector 14 S ATA 1 IDE connector 2 Diskette drive connector 15 Cover presence switch connector 3 Speaker connector .
Removing and replacing memory 1. Remove the cover . See “Removing the cover” on page 92. 2. Rotate the drive bay upward to gain access to the system boar d. *XXXXXXXXX* *XXXXXXXXX* 3. Locate the memory connectors. See “Identifying parts on the system board” on page 95.
Removing and replacing a PCI adapter 1. Remove the cover . See “Removing the cover” on page 92. 2. Rotate the drive bay assembly upward to gain access to the system boar d. *XXXXXXXXX* *XXXXXXXXX* 3. Open the adapter latch and remove the failing adapter .
*XXXXXXXXX* *XXXXXXXXX* 6. Rotate the drive bay assembly back to the normal position. 7. To complete the installation, go to “Closing the cover and connecting cables” on page 1 13. Removing and replacing the battery 1. Open the cover . See “Removing the cover” on page 92.
Removing and replacing the power supply Attention Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, curr ent, and energy levels are pr esent inside any component that has this label attached.
*XXXXXXXXX* *XXXXXXXXX* 4. Disconnect power supply cables 1 and 2 from the system boar d. 5. Disconnect the power supply cables from all of the drives.
*XXXXXXXXX * *XXXXXXXXX * 7. Install the new power supply assembly into the chassis so that the screw holes in the power supply assembly align with those in the chassis. Note: Use only the screws provided by Lenovo. 8. Install and tighten the four power supply assembly screws into the r ear of the chassis.
*XXXXXXXXX* *XXXXXXXXX* 6. Note the location of the memory modules, remove them fr om the failing system board, and install them on the new system boar d in the same location as they were on the failing system boar d. See “Removing and replacing memory” on page 96.
Important If the metal plate is not aligned correctly when you install the scr ews, you might damage the system board. 9. Install the screws that secur e the system board to the chassis. 10. Reconnect all cables that were disconnected fr om the system board.
3. Remove the heat sink 2 from the system boar d by rotating the lever 1 securing the heat sink until it is fully in the up position. Carefully lift the heat sink off the system boar d. Note: If you are replacing the system boar d, place the heat sink on its side on a clean, flat surface.
4. Release the lever 2 securing the micropr ocessor retainer 3 then rotate the retainer to fully open position. Do not r emove the microprocessor 1 until instructed. Important Do not touch the gold contacts on the bottom of the micropr ocessor .
5. Using the vacuum pen 1 , remove the micr oprocessor from the system boar d socket by lifting it straight up and out of the socket. Notes: a. Note of the orientation of the notches 1 on the micropr ocessor . This is important when reinstalling the micr oprocessor on the system board.
7. Loosen the protective cover 3 that pr otects the gold contacts on the micropr ocessor 2 but do not remove it. Use the vacuum pen 1 to pick up the micropr ocessor then completely remove the cover .
10. Lower the micropr ocessor retainer 3 and then secure the r etainer with the lever 2 . Note: If you are replacing the system boar d, a black protective cover on the retainer pr otects the microprocessor socket. When you close the r etainer , remove the cover .
If you are r eplacing a failing microprocessor , go to “Closing the cover and connecting cables” on page 1 13. Removing and replacing the hard disk drive 1. Remove the cover . See “Removing the cover” on page 92. 2. Rotate the drive bay assembly upward to gain access to the har d disk drive cables.
Removing and replacing the optical drive 1. Remove the cover . See “Removing the cover” on page 92. 2. Rotate the drive bay assembly upward to gain access to the optical drive cables. *XXXXXXXXX* *XXXXXXXXX* 3. Disconnect the signal and power cables from the r ear of the optical drive.
Removing and replacing the diskette drive 1. Remove the cover . See “Removing the cover” on page 92. 2. Rotate the drive bay assembly upward to gain access to the diskette drive cables. *XXXXXXXXX* *XXXXXXXXX* 3. Disconnect the signal and power cables from the r ear of the diskette drive.
Removing and replacing the fan assembly 1. Remove the cover . See “Removing the cover” on page 92. 2. Rotate the drive bay assembly upward to gain access to the fan baf fle and fan assembly . *XXXXXXXXX* *XXXXXXXXX* 3. Disconnect the fan cable from the system boar d fan connector .
4. The fan assembly is made up of two pieces, an air baffle and the fan. Release the air baffle by pr essing the plastic tab 1 as shown, then remove the air baffle fr om the inside of the rotating bay assembly . 5. Release the fan by pressing the two plastic tabs 3 as shown.
5. Reconnect the external cables and power cords to the computer . See “Locating connectors on the rear of the computer” on page 92. 6. If a cover lock is installed, lock the cover . 7. T urn on the computer . To update the configuration, see Chapter 6, “Using the Setup Utility,” on page 55.
Chapter 9. Replacing FRUs (T ypes 8143, 8144, 8146, 8422, 8423, and 8427) FRU replacements ar e to be done by trained service technicians only . This chapter does not contain a remove and r eplace procedure for all FRUs. Only the major FRUs are documented in this manual.
Locating connectors on the rear of the computer The following illustration shows locations of connectors on the rear of the computer . 1 Diagnostic LEDs 10 PS/2 mouse connector 2 V o.
4. Remove any locking devices that secure the cover . 5. Press the cover -release button on the right side cover , slide the cover to the rear , and lift off. Locating components 1 Memory modules 2 Power supply 3 Hard disk drive 4 PCI connector 5 Optional PCI adapter Chapter 9.
Identifying parts on the system board 1 12V power connector 14 S ATA 1 IDE connector 2 Diskette drive connector 15 Cover presence switch connector 3 Speaker connector .
Removing and replacing memory 1. Remove the cover . See “Removing the cover” on page 1 16. 2. Locate the memory connectors. See “Identifying parts on the system board” on page 1 18. 3. Open the retaining clips to r emove an existing memory module.
Removing and replacing a PCI adapter 1. Remove the cover . See “Removing the cover” on page 1 16. 2. Unlatch the adapter latch and remove the PCI adapter being r eplaced. 3. Remove the failing adapter from the computer . 4. Remove the new adapter from its static-pr otective package.
Removing and replacing the battery 1. Open the cover . See “Removing the cover” on page 1 16. 2. Refer to “Identifying parts on the system board” on page 11 8 and locate the battery . 3. Remove any parts that impede access to the battery . 4. Remove the old battery .
2. Press the r elease lever and rotate the hard disk drive outwar d using the blue handle 1 . Note: As you disconnect power supply cables, note the location of each connector . 3. Disconnect the power supply cable connected to each of the drives.
5. Remove the screws at the r ear of the chassis that secure the power supply assembly . 6. Hold the power supply while pressing inwar d on the metal retainer then remove the power supply assembly fr om the computer . Note: To allow removal of the power supply , the har d disk drive must be rotated outwar d until it is completely out of the way .
12. Ensure that all components have been r eassembled correctly and that no tools or loose screws ar e left inside your computer . 13. To finish the installation, see “Replacing the cover and connecting the cables” on page 135. Removing and replacing the system board 1.
6. Disengage the system board fr om the chassis by sliding it toward the front of the computer and then lift it out. 7. Place the defective system board next to the new system boar d on a clean, flat surface.
10. Place the new the system board into the chassis making sur e to engage the tabs into the plate on the bottom of the system board. Slide the system boar d toward the r ear until the screw-holes are aligned and install the scr ews that secure the system boar d to the chassis.
2. Remove the heat sink 2 from the system boar d by rotating the lever 1 on the heat sink until it is fully in the up position. Carefully lift the heat sink of f the system board. Note: If you are replacing the system boar d, place the heat sink on its side on a clean, flat surface.
4. Using the vacuum pen 1 , remove the micr oprocessor from the system boar d socket by lifting it straight up and out of the socket. Important Do not touch the gold contacts on the bottom of the micropr ocessor . If you must touch the micropr ocessor , touch only the sides.
6. Loosen the protective cover 3 that pr otects the gold contacts on the micropr ocessor 2 but do not remove it. Use the vacuum pen 1 to pick up the micropr ocessor then completely remove the cover .
9. Close the micropr ocessor retainer 3 and then secure the r etainer with the lever 2 . Note: If you are replacing the system boar d, a black protective cover on the retainer pr otects the microprocessor socket. When you close the r etainer , remove the cover .
10. Slide the heat sink 2 under the lip and into position on the micropr ocessor . Lower the lever 1 to secure the heat sink. Note: When you receive a new micropr ocessor , you will also receive a new heat sink. Yo u must install the new heat sink when replacing the micropr ocessor .
3. Disconnect the signal and power cables from the r ear of the hard disk drive. 4. By pulling on the blue handle, remove the har d disk drive and plastic bracket from the drive bay . 5. Note the orientation of the hard disk drive in the plastic bracket.
4. Remove the retainer bracket form the failing drive and install it on the new drive. 5. Install the optical drive into the bay until it snaps into position. 6. Connect the signal and power cables to the drive. 7. To complete the installation, go to “Replacing the cover and connecting the cables” on page 135.
3. Release the diskette disk drive by pressing on the blue r etainer lever at the side of the drive and removing it fr om the front of the computer . 4. Remove the retainer bracket form the failing drive and install it on the new drive. 5. Install the diskette drive into the bay until it snaps into position.
4. The fan assembly is made up of two pieces, an air baffle and the fan. Release the fan assembly by pressing on the tab and pulling it outwar d. 5. Align the new fan assembly to the holes in the chassis and slide it inward until it is latched into position.
2. Clear any cables that might impede the replacement of the cover . 3. Position the cover on the chassis so that the rail guides on the bottom of the cover engage the rails and push the cover closed until it latches. 4. Reconnect the external cables and the power cord to the computer .
Chapter 10. Replacing FRUs (T ypes 8098, 8171, 8172, 8173, 8424, and 8425) FRU replacements ar e to be done by trained service technicians only . This chapter does not contain a remove and r eplace procedure for all FRUs. Only the major FRUs are documented in this manual.
Locating connectors on the rear of the computer The following illustration shows locations of connectors on the rear of the computer . 1 Power cord connector 9 Parallel connector 2 C.
Locating components 1 Diskette drive lock 2 Memory connectors (2) 3 Battery 4 PCI riser assembly 5 Power supply 6 Optical drive (hard disk drive is under the optical drive) 7 Optical drive lock Chapter 10.
Identifying parts on the system board 1 Fan connectors (2) 8 Diskette drive connector 2 Memory connectors (2) 9 Front panel connector 3 S ATA 1 IDE and S ATA 2 IDE hard d.
Removing and replacing memory 1. Open the cover . See “Opening the cover” on page 138. 2. Locate the memory connectors. See “Identifying parts on the system board” on page 140. 3. Open the retaining clips to r emove an existing memory module. 4.
Replacing a PCI adapter 1. Open the cover . See “Opening the cover” on page 138. 2. While holding the left rear of the computer chassis down, pull upwar d on the handle provided to r emove the PCI riser including any adapters that are already installed.
Removing and replacing the battery 1. Open the cover . See “Opening the cover” on page 138. 2. Locate the battery on the system board. See “Identifying parts on the system board” on page 140. 3. Remove any parts that impede access to the battery .
2. Close the cover and remove the four scr ews at the rear of the chassis. 3. Open the cover and rotate the drive bay assembly upwar d to gain access to the power supply cable connections. 4. Disconnect the power supply cables from all the drives. 5. Disconnect power supply connectors 1 and 2 from the system boar d.
7. Install the new power supply assembly into the chassis so that the screw holes in the power supply assembly align with those in the chassis. Note: Use only the screws provided by Lenovo. 8. Install and tighten the four power supply assembly screws into the r ear of the chassis.
Removing and replacing the system board 1. Open the cover . See “Opening the cover” on page 138. 2. While holding the left rear of the computer chassis down, pull upwar d on the handle provided, to r emove the PCI riser card assembly along with any adapters.
9. Reinstall the PCI riser card and any adapters. 10. Lower the drive bay assembly into the normal position. 11 . To complete the installation, go to “Closing the cover and connecting cables” on page 159.
2. Rotate the drive bay assembly upward to gain access to the system boar d. 3. Release the lever 1 securing the micropr ocessor heat sink. 4. Carefully lift the heat sink of f the system board. Note: If you are replacing the system boar d, place the heat sink on its side on a clean, flat surface.
5. Release the lever 2 securing the micropr ocessor retainer 1 . Rotate the retainer to the fully open position. 6. Use the vacuum pen 1 to lift the micropr ocessor straight up and out of the socket.
7. Loosen the black protective cover 3 that pr otects the gold contacts on the micropr ocessor 2 but do not remove it. Use the vacuum pen 1 to pick up the micropr ocessor then completely remove the cover . * XXXXXXXXX* 8. Align the notches 1 on the new micropr ocessor with the tabs on the micropr ocessor socket.
9. Using the vacuum pen, lower the micropr ocessor straight down into the micropr ocessor socket. Important To avoid damaging the microprocessor contacts, do not tilt the micropr ocessor when installing it into the socket. 10. Lower the micropr ocessor retainer and secure it with the lever .
Removing and replacing the hard disk drive 1. Open the cover . See “Opening the cover” on page 138. 2. Rotate the drive bay assembly upward to gain access to the har d disk drive cable connections. Notes: a. If a CD drive is installed, it helps to disconnect the signal cable from the drive to access the hard disk drive cables.
Removing and replacing the optical drive 1. Open the cover . See “Opening the cover” on page 138. 2. Rotate the drive bay assembly upward to gain access to the cable connections. 3. Disconnect the signal and power cables from the drive. Note: The blue straps are provided to help when disconnecting cables.
Removing and replacing the diskette drive 1. Open the cover . See “Opening the cover” on page 138. 2. Slide the diskette drive lock 1 to the unlocked position. 3. Rotate the drive bay assembly upward. 4. Slide the drive towards the r ear of the computer and remove the drive.
3. Rotate the drive bay assembly upward to gain access to the fan assembly 3 . Note: Some models have two fans. 4. Disconnect fan assembly cable(s) from the system boar d. See “Identifying parts on the system board” on page 140. Note: Make sure you note the location of the fan cable(s) when you disconnect it from the system boar d.
6. Remove the plastic insert behind the bezel by releasing the tabs as shown: 7. Remove the fan assembly by releasing the tabs as shown. 8. Install the new fan assembly and connect the fan cable to the system board. 9. Reinstall the plastic insert. 10.
Removing and replacing the internal speaker 1. T urn off the computer and disconnect the power cord fr om the electrical outlet and from the computer . 2. Open the cover . See “Opening the cover” on page 138. 3. Rotate the drive bay assembly upward to gain access to the speaker .
Note: Make sure you note the location of the power button and LED assembly cable when you disconnect it from the system boar d. 5. Lift the tab and slide the power button and LED assembly 2 out. 6. Install the new power button and LED assembly and reconnect the power button and LED assembly cable.
Closing the cover and connecting cables After replacing the har dware, you need to install any removed parts, r eplace the cover , and reconnect any cables, including telephone lines and power cor ds. Also, depending on the FRU that was replaced, you might need to confirm the updated information in the Setup Utility program.
160 Hardwar e Maintenance Manual.
Chapter 11 . FRU lists This section lists field replaceable units (FRUs) for all machine types. Note: A CRU (Customer Replaceable Unit) is identified by a single asterisk (*) or two asterisks (**) in the CRU ID column. An N in the CRU ID Column means that the part is not a CRU.
Item # 8095 FRUs FRU# CRU 5 3.06GHZ Celeron Pr escott P4 (models CTO) 29R8208 ** 5 2.53GHZ Celeron Pr escott P4 326 (models CTO) 39J9397 ** 5 2.66 GHZ Celeron Pr escott P4 (models CTO) 39J9399 ** 5 2.8 GHZ Celeron Pr escott P4 (models CTO) 39J9401 ** 5 2.
Item # 8095 FRUs FRU# CRU 8 CD-ROM Drive 48X - Black w/o jack & vol (models CTO-U CT O-G 1 1M) 71P7375 * 8 CD-ROM Drive 48X - Black w/o jack & vol (models CTO-U CT O-G 1 1M) 71P7385 * 8 CD-ROM.
The FRUs listed in the following table are not illustrated. 8095 FRUs FRU# CRU HDD Mounting Brkt Asm (all models) 88P5916 * Speaker Asm (all models) 00N5151 * Speaker Cable Asm (RoHS Compliant) (all m.
8095 Keyboards (Preferred Pro Fullsize) FRU# CRU Belgian/French (models CT O-G) 89P8302 * Belgian/UK (models CTO-G) 89P8303 * Bulgarian (models CTO-G) 89P8305 * Czech (models CTO-G) 89P8307 * Danish (.
8095 Power Cords FRU# CRU Power cord (EMEA, ANZ, ASEAN Eng) (models CT O-G) 14F0014 * Power cord (EMEA) (models CT O-G) 14F0050 * 8095 W indows XP Pro Recovery CDs FRU # CRU US (models 1 1M) 19R3272 *.
Machine T ype 8098 1 6 7 8 9 5 10 11 12 13 14 4 3 2 Item # 8098 FRUs FRU# CRU 1 Cover (all models) 26K1217 ** 2 Power Supply (225 W att) (models CTO-U CT O-G 1 1M) 24R2567 ** 3 CD-ROM Drive 48X - Blac.
Item # 8098 FRUs FRU# CRU 3 DVD-ROM 16X/48X - Black (models CTO) 39M3515 * 3 DVD-ROM 16X/48X - Black (models CTO) 39M3517 * 3 DVD-ROM 16X/48X - Black (models CTO) 40Y8935 * 3 DVD-ROM 16X/48X - Black (.
Item # 8098 FRUs FRU# CRU 9 2.66 GHZ Celeron Pr escott P4 (models CTO-U CTO-G) 29R7205 ** 9 2.8 GHZ Celeron Pr escott P4 (models CTO-U CTO-G) 29R7207 ** 9 2.93 GHZ Celeron Pr escott P4 (models CTO-U CTO-G) 29R7209 ** 9 3.06 GHZ Celeron Pr escott P4 (models CTO) 29R8205 ** 9 2.
8098 FRUs FRU# CRU Internal plastic kit (all models) 03R0289 * Cable, optical 1-drop ATA 100 (all models) 03R0291 * Cable, 2-drop ATA 100 (all models) 03R0292 * Cable, S ATA (all models) 03R0293 * Cable, Diskette drive (all models) 03R0297 * C2 Cable (Squall) (models CTO-U CT O-G 1 1M) 09K9827 * Shield, 5.
8098 Keyboards (Preferred Pro Fullsize) FRU# CRU French (models CT O-G) 89P8310 * French Canadian 445 (models CT O-U) 89P831 1 * French Canadian 58 (models CT O-U) 89P8312 * German (models CTO-G) 89P8.
Machine T ype 8141 1 2 3 4 5 6 7 8 9 10 Item # 8141 FRUs FRU# CRU 1 To p Cover Asm (all models) 89P6730 * 2 Heat sink (all models) 89P6729 ** 3 256MB PC2 3200 Memory (DDR1) (models 21S 21P 21Y 31S 31P.
Item # 8141 FRUs FRU# CRU 3 512MB PC2 3200 Memory (400mhz DDR2) (models 4HJ B3J B4J B5A B5Q B5T D1J D2J D5A D5Q D5T CTO 18U 18F 2AU 2AF A9U A9F A9S A9P A9Y 2MU 2MF 3PU 3PF 56A 56Q 56T BFQ BFT DEU DEA .
Item # 8141 FRUs FRU# CRU 5 3.2GHZ Prescott P4 (models 31S 31P 31Y 32A 32T CT O 31U 31F 31G 31L 31D 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31J 32U 32Q 33C 33B 33H 33V 34G 35S 35P 35Y CBU 31E 36U 37U 37F 37S 37P 37L 37D 37Y 37G 37M 37A 37Q 37T 37C 37B 37H 37V 37K 37E 37J 38S 38P 38L 38Y 39U 3AU 3BU 3BF 3CU 3CF 3DS 3DP 3DY) 19R0497 ** 5 3.
Item # 8141 FRUs FRU# CRU 7 HDD 40GB 7200 rpm Serial ATA (models 11 U 23U 23F 23G 24A 24Q 24T 31U 31F 31G 31L 31D 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31J 32U 32Q 31E A1U A1S A1P A1L A1Y A2U A2S A2P A2.
Item # 8141 FRUs FRU# CRU 8 CD-ROM Drive 48X - Black w/o jack & vol (models BCS BCP BCY DBS DBP DBY 21S 21P 21Y 31S 31P 31Y 32A 32T CTO 11 U 22B 22H 23U 23F 23G 24A 24Q 24T 31U 31F 31G 31L 31D 31M.
Item # 8141 FRUs FRU# CRU 8 CD-ROM Drive 48X - Black w/o jack & vol (models BCS BCP BCY DBS DBP DBY A7U ABS ABP ABY A8U ACS ACP ACY A9U A9F A9S A9P A9Y AAU ADS ADP ADY 1BU 1CU 19U 1AS 1AP 1A Y 2DS.
Item # 8141 FRUs FRU# CRU 8 CD-R W Drive (48X/32X/48X) (models CTO 15U 38S 38P 38L 38Y 3DS 3DP 3DY BBS BBP BBY DAS DAP DA Y) 26K5449 * 8 CD-R W Drive (48X/32X/48X) (models CTO 15U 38S 38P 38L 38Y 3DS .
Item # 8141 FRUs FRU# CRU 9 3.5 ″ 1.44MB 2 Mode diskette drive (models A6S A6P A6Y 18U 18F 2AU 2AF 2BS 2BP 2BY 3CU 3CF 3DS 3DP 3DY 4RG 4SG BBS BBP BBY BCS BCP BCY DAS DAP DA Y DBS DBP DBY 2CU CTO A7.
Item # 8141 FRUs FRU# CRU 10 Power Supply 310 W att (China) (models ABS ABP ABY ACS ACP ACY A9S A9P A9Y ADS ADP ADY 1AS 1AP 1A Y 2DS 2DP 2DY 2DB 2FS 2FP 2FL 2FD 2FY 2FQ 2FC 2FB 2FH 2FV 2GS 2GP 2GQ 3ES.
8141 FRUs FRU# CRU Battery , 3.0V (all models) 33F8354 * Universal Adapter Bracket 5.25 to 3.5-inch 32P4743 * Mouse, PS/2 -button (Black) (models CTO) 24P0383 * Mouse, PS/2 - 3 Btn (Ball) Wheel (model.
8141 Keyboards (Preferred Pro Fullsize) FRU# CRU US English (models 3NU 3NL 3NG 3NM 3NA 3NQ 3NC 3NH 4TC 4UG 4VU 4WU 4XU 54U 54G 55C 56A 56Q BDU BDL BDG BDM BDA BDQ BDC BDH BEU BF A BFQ DCU DDU DEU DEA.
8141 Keyboards (Preferred Pro Fullsize) FRU# CRU LA Spanish (models 21S 21Y 31S 31Y 31D 35S 35Y A1S A1Y A2S A2Y 13S 13Y 27S 27Y 37S 37D 37Y 38S 38Y A4S A4Y A5S 16S 16Y 4MS 4MY 4NS 4NY B9S B9Y D9S D9Y .
8141 Fingerprint Keyboards FRU# CRU LA Spanish (models 2BS 2BY 3DS 3DY BBS BBY DAS DA Y) 89P9022 * 8141 Power Cords FRU# CRU Power cord (models 21S 21P 31S 31P 32A 32T 11 U 23U 23F 23G 24A 24T 25G 31U.
8141 W indows XP Home Recovery CDs FRU # CRU KR (models A3K 17K B8K D8K A3K 17K B8K D8K) 27K6742 * 8141 W indows XP Pro Recovery CDs FRU # CRU US (models 32A 32T 11 U 22H 23U 23G 24A 24Q 24T 25G 31U 3.
8141 W indows XP Pro Recovery CDs FRU # CRU TR (models 23G 25G 31G 34G 37G B2G D3G D4G B1G 4RG 4SG 2EG 2FG 2LG 3FG 3NG 4UG 54G BDG) 39J6602 * GK (models 23G 25G 31G 34G 37G B2G D3G D4G B1G 4RG 4SG 2EG.
Machine T ype 8142 1 2 3 4 5 6 7 8 9 10 Item # 8142 FRUs FRU# CRU 1 To p Cover Asm (all models) 89P6730 * 2 Heat sink (models CTO 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31.
Item # 8142 FRUs FRU# CRU 4 System board 10/1000 w/ POV (models CT O 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31E 31J 32M 33M 3AM 37U 37F 37S 37P 37L 37D 37Y 37G 37M 37A 37Q.
Item # 8142 FRUs FRU# CRU 5 3.8GHZ Prescott P4 571 (models CT O) 41D0537 ** 5 3.0GHZ Prescott P4 (models CT O D1M D2M D3M D4M BDU BDF BDS BDP BDL BDD BDY BDG BDM BDA BDQ BDT BDC BDB BDH BDV BDK BDJ) 39J6589 ** 5 3.2GHZ Prescott P4 (models CT O E1A E1Q E1T) 39J6591 ** 5 3.
Item # 8142 FRUs FRU# CRU 8 CD-ROM Drive 48X - Black w/o jack & vol (models CTO 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31E 31J 32M 33M 2GA 2GQ 2GT 3FU 3FF 3FS 3FP 3FL .
Item # 8142 FRUs FRU# CRU 8 DVD-ROM 16X/48X - Black (models CTO 37U 37F 37S 37P 37L 37D 37Y 37G 37M 37A 37Q 37T 37C 37B 37H 37V 37K 37E 37J 38U 38F 38S 38P 38D 38Y 38G 38M 38A 38Q 38T 38C 38B 38H 38V .
Item # 8142 FRUs FRU# CRU 9 3.5 ″ 1.44MB 2MODE diskette drive (models CTO 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31E 31J 32M 33M 3AM 37U 37F 37S 37P 37L 37D 37Y 37G 37M .
Item # 8142 FRUs FRU# CRU 9 3.5 ″ 1.44MB 2MODE diskette drive (models CTO 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31E 31J 32M 33M 3AM 37U 37F 37S 37P 37L 37D 37Y 37G 37M .
8142 FRUs FRU# CRU Universal Adapter Bracket 5.25 to 3.5-inch 32P4743 * Mouse, PS/2 2-button (Black) (models CTO) 24P0383 * Mouse, PS/2 - 3 Button (Ball) Wheel (models CTO) 24P0491 * Mouse, Optical Wh.
8142 Keyboards (Preferred Pro Fullsize) FRU# CRU French Canadian 58 (models CT O-U 31F 37F 38F 2FF 3FF 3NF BDF) 89P8312 * German (models CTO-G 31G 37G 38G 2FG 3FG 3NG BDG) 89P8313 * Greek (models CT O.
8142 Power Cords FRU# CRU Power cord (EMEA) (models 31G 37G 38G 2FG 3FG 3NG BDG) 13F9996 * Power cord (EMEA, LA) (models 31S 31P 31L 31D 31Y 31G 37S 37P 37L 37D 37Y 37G 38S 38P 38D 38Y 38G 2FS 2FP 2FL.
8142 W indows XP Pro Recovery CDs FRU # CRU Multilingual 1 (models 31G 37G 38G 2FG 3FG 3NG BDG) 39J6215 * Multilingual 2 (models 31G 37G 38G 2FG 3FG 3NG BDG) 39J6216 * Chapter 11 .
Machine T ype 8143 1 2 3 4 5 6 7 8 9 10 11 Item # 8143 FRUs FRU# CRU 1 Bezel (all models) 26K1 1 16 * 2 Chassis Asm (subd from 26K1 1 13) (all models) 26K1 160 ** 3 Power Supply 310 W att (models CTO .
Item # 8143 FRUs FRU# CRU 3 Power Supply 310 W att (China) (models 21S 21P 21Y 31S 31P 31Y 22B 22H 25Q 34S 34P 34L 34D 34Y 34Q 34C 34B 34H 34V 35C 35B 35H 35V A1S A1P A1L A1Y A2S A2P A2L A2Y 12Q 12C 1.
Item # 8143 FRUs FRU# CRU 5 HDD 80GB 7200 rpm Serial ATA (models 21S 21P 21Y 31S 31P 31Y CT O 22B 22H 23G 35C 35B 35H 35V 35K 36G 26S 26P 26L 26Y 28U 29U 37S 37P 37L 37Y 38U 38F 38S 38P 38L 38D 38Y 38.
Item # 8143 FRUs FRU# CRU 7 Heat sink (models 4LS 4L Y 4MU 4MS 4MY 4NS 4NY CFU B1G B2G B3J B4J B5A B5Q B5T B6V B7K B8K B9K BAK BBU BBF BBS BBY D1J D2J D3G D4G D5A D5Q D5T D6U D6F D6S D6Y D6C D6V D7K D.
Item # 8143 FRUs FRU# CRU 9 3.06GHZ Celeron Pr escott P4 (models CTO) 41D0678 ** 9 2.8GHZ Prescott P4 (models 11 U CTO) 19R0495 ** 9 3.0GHZ Prescott P4 (models 21S 21P 21Y CT O 22B 22H 23G 24U 24F 24G 25A 25Q 25T CAU 26S 26P 26L 26Y 27U 28U 29U 2AU 2AF 2CU) 19R0496 ** 9 3.
Item # 8143 FRUs FRU# CRU 10 3.5 ″ 1.44MB 2MODE diskette drive (models 4MS 4MY 4NS 4NY B1G B2G B3J B4J B5A B5Q B5T B6V B7K B8K B9K BAK BBU BBF BBS BBY D1J D2J D3G D4G D5A D5Q D5T D6U D6F D6S D6Y D6C.
Item # 8143 FRUs FRU# CRU 10 3.5 ″ 1.44MB 2MODE diskette drive (models 17U 17F 2AU 2AF 3DU 3DF 3DF 3DS 3DY 4RG 4SG BDS BDY DAS DA Y 2CU CTO A6U A7U A8U A9U 19U 1AU 18U 2DB 2DH 2EU 2EF 2EG 2FU 2FF 2F.
Item # 8143 FRUs FRU# CRU 11 CD-ROM Drive 48X - Black w/o jack & vol (models A6U A7U A8U A9U 19U 18U 2DB 2DH 2EU 2EF 2EG 2GA 2GQ 2GT 2MU 2MF 3FC 3FB 3FH 3FV 3FK 3GU 3GF 3GS 3GP 3GL 3GD 3GY 3GG 3GM.
Item # 8143 FRUs FRU# CRU 11 DVD-ROM 16X/48X - Black (models CTO 27U 38U 38F 38S 38P 38L 38D 38Y 38G 38M 38A 38Q 38T 38C 38B 38H 38V 38K 38E 38J 4EC 4GU 4GF B1G D3G 4SG 2FU 2FF 2FS 2FP 2FL 2FD 2FY 2FG.
Item # 8143 FRUs FRU# CRU 11 DVD-ROM/CD-R W Combo Drive (48x/32x/48x/16x) (models CTO 28U 29U 39U 39A 39B 16K 3CU 3CF 4FC 4JU 4JF 4MU 4MS 4MY B4J B9K BAK D2J D7K D8K D9K 2CU 2HU 2JU 2KU 3KU 3LU 3MU 3M.
8143 FRUs FRU# CRU Device Retaining Clips (all models) 13N2449 * System board shield (all models) 89P6727 * Miscellaneous Hardwar e kit (all models) 89P6737 * Cable, 1394 Front (all models) 89P6738 ** Retention module (all models) 89P6725 * Battery , 3.
8143 Keyboards FRU# CRU US English (models A6U A7U A8U A9U 19U 1AU 18U 2DH 2EU 2EG 2FU 2FL 2FG 2FM 2F A 2FQ 2FC 2FH 2GA 2GQ 2HU 2JU 2KU 2LU 2LG 2MU 3EU 3FC 3FH 3GU 3GL 3GG 3GM 3GA 3GQ 3GC 3GH 3HU 3JA .
8143 Keyboards FRU# CRU LA Spanish (models 21S 21Y 31S 31Y 34S 34D 34Y A1S A1Y A2S A2Y 13S 13Y 26S 26Y 37S 37Y 38S 38D 38Y A5S A5Y 4LS 4L Y 4MS 4MY 4NS 4NY BBS BBY D6S D6Y CTO-L BDS BDY DAS DA Y 2FS 2.
8143 Power Cords FRU# CRU Power cord (models 21S 21P 31S 31P 32A 32T 11 U 23G 24U 24F 24G 25A 25T 32U 33U 34U 34F 34S 34P 34L 34D 34G 34A 34T 34V 35V 36G CAU CBU A1U A1S A1P A1L A2U A2S A2P A2L A3U 12.
8143 W indows XP Pro Recovery CDs FRU # CRU US (models 32A 32T 11 U 22H 23G 24U 24G 25A 25Q 25T 32U 33U 34U 34L 34G 34M 34A 34Q 34T 34H 34R 34E 35H 36G CAU CBU A1U A1L A2U A2L A3U 12A 12Q 12T 12H 13U .
8143 W indows XP Pro Recovery CDs FRU # CRU GK (models 23G 24G 34G 36G 38G B1G B2G D3G D4G 4RG 4SG 2EG 2FG 2LG 3GG 3NG 4VG 54G BEG) 39J6616 * SL (models 23G 24G 34G 36G 38G B1G B2G D3G D4G 4RG 4SG 2EG.
Machine T ype 8144 1 2 3 4 5 6 7 8 9 10 11 Item # 8144 FRUs FRU# CRU 1 Bezel (all models) 26K1 1 16 * 2 Chassis Asm (subd from 26K1 1 13) (all models) 26K1 160 ** 3 Power Supply 310 W att (models CTO .
Item # 8144 FRUs FRU# CRU 5 HDD 40GB 7200 rpm Serial ATA (models 35U 35F 35S 35P 35L 35D 35Y 35G 35M 35A 35Q 35T 35C 35B 35H 35V 35K 35E 35J CTO 39U 39F 39S 39P 39D 39Y 39G 39M 39A 39Q 39T 39C 39B 39H.
Item # 8144 FRUs FRU# CRU 9 2.53GHZ Celeron Pr escott P4 326 (models CTO) 39J9397 ** 9 2.66 GHZ Celeron Pr escott P4 331 (models CTO) 39J9399 ** 9 2.8 GHZ Celeron Pr escott P4 336 (models CTO) 39J9401 ** 9 2.93 GHZ Celeron Pr escott P4 341 (models CTO) 39J9403 ** 9 3.
Item # 8144 FRUs FRU# CRU 10 3.5 ″ 1.44MB 2MODE diskette drive (models CTO 35U 35F 35S 35P 35L 35D 35Y 35G 35M 35A 35Q 35T 35C 35B 35H 35V 35K 35E 35J 38U 38F 38S 38P 38L 38D 38Y 38G 38M 38A 38Q 38T.
Item # 8144 FRUs FRU# CRU 11 CD-ROM Drive 48X - Black w/o jack & vol (models CTO 35U 35F 35S 35P 35L 35D 35Y 35G 35M 35A 35Q 35T 35C 35B 35H 35V 35K 35E 35J 2GA 2GQ 2GT 3GU 3GF 3GS 3GP 3GL 3GD 3GY.
Item # 8144 FRUs FRU# CRU 11 DVD-ROM 16X/48X - Black (models CTO 2FU 2FF 2FS 2FP 2FL 2FD 2FY 2FG 2FM 2F A 2FQ 2FT 2FC 2FB 2FH 2FV 2FK 2FJ 3HQ 3HT 3HC 3HB 3HH 3HV 3HK 3NU 3NF 3NS 3NP 3NL 3ND 3NY 3NG 3N.
8144 FRUs FRU# CRU HDD Mounting Brkt Asm (all models) 88P5916 * Cable, Second Serial Port (all models) 49P4530 ** Shield, Diskette drive EMC (all models) 26K1 155 ** Cable, Optical IDE (all models) 89.
8144 Keyboards FRU# CRU US English (models CTO 35U 35L 35G 35M 35A 35Q 35C 35H 35E 38U 38L 38G 38M 38A 38Q 38C 38H 38E 39U 39G 39M 39A 39Q 39C 39H 39R 39E 2FU 2FL 2FG 2FM 2F A 2FQ 2FC 2FH 2GA 2GQ 3GU .
8144 Keyboards FRU# CRU US Euro (models CT O-G 35G 38G 4SG 239G 2FG 3GG 3NG BEG) 89P8338 * Y ugoslav/Latin (models CTO-G 35G 38G 4SG 239G 2FG 3GG 3NG BEG) 89P8339 * Brazil/Portugese (models 35P 38P 39.
8144 W indows XP Pro Recovery CDs FRU # CRU NO (models 35G 38G 4SG 239G 2FG 3GG 3NG BEG) 39J6606 * PL (models 35G 38G 4SG 239G 2FG 3GG 3NG BEG) 39J6609 * PO (models 35G 38G 4SG 239G 2FG 3GG 3NG BEG) 3.
Machine T ype 8145 1 2 3 4 5 6 7 8 9 10 Item # 8145 FRUs FRU# CRU 1 To p Cover Asm (all models) 89P6730 * 2 Heat sink (models CTO-U CT O-G 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 3.
Item # 8145 FRUs FRU# CRU 5 2.93GHZ Prescott P4 (models CT O-U CTO-G) 29R7225 ** 5 2.66GHZ Celeron Pr escott P4 346 (models CTO) 41D0676 ** 5 2.93GHZ Celeron Pr escott P4 351 (models CTO) 41D0677 ** 5 3.06GHZ Celeron Pr escott P4 (models CTO) 41D0678 ** 5 2.
Item # 8145 FRUs FRU# CRU 8 CD-ROM Drive 48X - Black w/o jack & vol (models CTO-U CT O-G 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31E 31J) 71P7375 * 8 CD-ROM Drive 48X -.
Item # 8145 FRUs FRU# CRU 9 3.5 ″ 1.44MB 2MODE diskette drive (models CTO 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31E 31J) 40Y9107 * 9 3.5 ″ 1.44MB 2MODE diskette drive (models CTO 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31E 31J) 24P3889 * 9 3.
8145 FRUs FRU# CRU RJ1 1 Connector adapter (Belgium) (all ’G’ models) 60H6046 * RJ1 1 Connector adapter (Denmark) (all ’G’ models) 60H6047 * RJ1 1 Connector adapter (Norway/Finland) (all ’G.
8145 Keyboards (Preferred Pro Fullsize) FRU# CRU Slovak (models 31G) 89P8330 * Spanish (models 31G) 89P8331 * Swedish/Finn (models 31G) 89P8332 * Swiss F/G (models 31G) 89P8333 * Thailand (models 31T).
8145 W indows XP Pro Recovery CDs FRU # CRU PO (models 31G) 39J6615 * RU (models 31G) 41D1 198 * RE (models 31G) 41D1223 * HU (models 31G) 39J6614 * CZ (models 31G) 39J6610 * TR (models 31G) 39J6602 *.
Machine T ype 8146 1 2 3 4 5 6 7 8 9 10 11 Item # 8146 FRUs FRU# CRU 1 Bezel (all models) 26K1 1 16 * 2 Chassis Asm (subd from 26K1 1 13) (all models) 26K1 160 ** 3 Power Supply 310 W att (models 31U .
Item # 8146 FRUs FRU# CRU 9 2.8 GHZ Celeron Pr escott P4 336 (models CTO) 39J9401 ** 9 2.93 GHZ Celeron Pr escott P4 341 (models CTO) 39J9403 ** 9 3.06 GHZ Celeron Pr escott P4 346 (models CTO) 39J9405 ** 9 3.2 GHZ Celeron Pr escott P4 351 (models CTO) 41D0533 ** 9 2.
Item # 8146 FRUs FRU# CRU 11 CD-ROM Drive 48X - Black w/o jack & vol (models CTO-U CTO-G 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31E 31J) 71P7375 * 11 CD-ROM Drive 48X .
8146 FRUs FRU# CRU HDD Mounting Brkt Asm (all models) 88P5916 * Speaker Asm, internal (all models) 00N5151 * C2 Cable Asm (all models) 09K9827 * Cable, Second Serial Port (all models) 49P4530 * Retent.
8146 Keyboards (Preferred Pro Fullsize) FRU# CRU Belgian/UK (models 31G) 89P8303 * Bulgarian (models 31G) 89P8305 * Chinese/US (models 31B 31V) 89P8306 * Czech (models 31G) 89P8307 * Danish (models 31.
8146 Power Cords FRU# CRU Power cord (EMEA, ANZ, ASEAN Eng, Kor ea) (models 31G 31K) 13F9978 * Power cord (EMEA, ANZ, ASEAN Eng, HK Eng) (models 31G 31H) 14F0032 * Power cord (EMEA) (models 31G) 13F99.
Machine T ype 8171 1 6 7 8 9 5 10 11 12 13 14 4 3 2 Item # 8171 FRUs FRU# CRU 1 Cover (all models) 26K1217 ** 2 Power Supply (225 W att) (models 63K 64G 65U 66U 67U 6AU 6AF 6AG 6AM 6AA 6A T 6AK 6AJ 6B.
Item # 8171 FRUs FRU# CRU 2 Power Supply (225 W att) (China) (models 62S 62P 62Y 68C 68B 68H 69C 6AS 6AP 6AD 6A Y 6AQ 6AC 6AB 6AH 6A V 6LS 6LP 6L Y 6FS 6FP 6FY 6FQ 6JS 6JP 6JY 6MS 6MP 6MY BHB BHH BJS .
Item # 8171 FRUs FRU# CRU 3 CD-ROM Drive 48X - Black w/o jack & vol (models A9K 1CC 1CB 1CH 1DK 1FC 1FB 1FH 1FV 1FK 1HU 1HF 2GB 2GH 2HK 2KU 2MU 2MF 3MC 3MB 3MH 3MV 3NC 3NB 3NH 3NV 3RU 3SU 3SF) 39M.
Item # 8171 FRUs FRU# CRU 3 CD-R W Drive (48X/32X/48X) (models CTO B6A B6Q B6T D8A D8Q D8T 2NS 2NP 2NY 3TS 3TP 3TY 4SS 4SP 4SY BFS BFP BFY DDS DDP DDY) 40Y8937 * 3 Universal Combo Drive (48x/24x/48x/1.
Item # 8171 FRUs FRU# CRU 4 HDD 40GB 7200rpm Serial ATA (models 4TU 4WU 4XU 4XF 4XS 4XP 4XD 4XY 4XG 4XM 4XA 4XQ 4XT 4XC 4XB 4XH 4XV 4XK 4XJ 4YU 6BU 6BF 6DU 6EU BMU BMF BMS BMP BMD BMY BMG BMM BMA BMQ .
Item # 8171 FRUs FRU# CRU 4 HDD 80GB 7200rpm Serial ATA (models 62S 62P 62Y 63K 64G 65U 66U 67U 68C 68B 68H 69C 6AU 6AF 6AS 6AP 6AD 6A Y 6AG 6AM 6AA 6AQ 6A T 6AC 6AB 6AH 6A V 6AK 6AJ 6LS 6LP 6L Y 6CU .
Item # 8171 FRUs FRU# CRU 7 Diskette drive, Half Inch (slim) 1.44MB 3 Mode (models 63K 64G 66U 67U 68C 68B 68H 69C 6AU 6AF 6AS 6AP 6AD 6A Y 6AG 6AM 6AA 6AQ 6A T 6AC 6AB 6AH 6A V 6AK 6AJ 6LS 6LP 6L Y 6.
Item # 8171 FRUs FRU# CRU 9 3.0 GHZ Prescott P4 (models 23J 24J 22E 22J CT O 21U 21G 25S 25L 25Y 26S 26Y 27B 27H 28A 28T 29G 2AA 2A T 2BQ CAU 21F 2CU 2DU 2EU 2EF 2FU 2GB 2GH 2HK 2JK 2KU 2MU 2MF 2NS 2NP 2NY 2PU) 19R0490 ** 9 3.
Item # 8171 FRUs FRU# CRU 10 System Board (Intel 915GV) 10/1000 w/POV (models 69C 6AU 6AF 6AS 6AP 6AD 6A Y 6AG 6AM 6AA 6AQ 6A T 6AC 6AB 6AH 6A V 6AK 6AJ 6LS 6LP 6L Y 6DU 6EU 6FS 6FP 6FY 6FQ 6GU 6HU 6J.
8171 FRUs FRU# CRU Cable, PWR/LED (all models) 03R0283 * Lock assembly (Random keyed) (models 25S 25L 25Y 26S 26Y 27B 27H 28A 28T 29G 2BQ 35U 35A 35T 37S 37P 37Y 38C 38B 38H 38V 38K 39Q 3BA 3BT 3CG A1.
8171 FRUs FRU# CRU Mouse, optical wheel (models ABU ACU AGS ADU AEU AHS AHP AFU 1JU 1KU 2QB 2QH 2RU 2RF 2SU 2TU 2TF 2UU 2VK 2WS 2WP 2WY 2W A 2WQ 2WT 2XU 57U 57G 58U 58F 58S 58P 58D 58Y 58G 58M 58A 58Q.
8171 FRUs FRU# CRU RJ1 1 connector adapter (Italy) (All ’G’ models) 60H6052 * RJ1 1 connector adapter (Netherlands) (All ’G’ models) 60H6053 * RJ1 1 connector adapter (Sweden) (All ’G’ mod.
8171 Keyboards FRU# CRU Italian 141 (models CTO-G 21G 29G 31G 3AG 3CG 3FG B4G D1G 64G 6AG 6JG BMG BPG DJG 57G 58G 59G 4XG) 89P8318 * Italian 142 (models CTO-G 21G 29G 31G 3AG 3CG 3FG B4G D1G 64G 6AG 6.
8171 Keyboards (Productivity USB) FRU# CRU US English (models CTO B8C D9C 1CC 1CH 1FC 1FH 1GC 1GH 1HU 2GH 3MC 3MH 3NC 3NH 3PC 3PH 4QG) 89P8800 * Arabic (models CTO-G 4QG) 89P8801 * Arabic/French (mode.
8171 Fingerprint Keyboards FRU# CRU Arabic/French (models CT O-G) 89P9002 * Belgian/French (models CT O-G) 89P9003 * Belgian/UK (models CTO-G) 89P9004 * Brazilian (models CTO-L 2NP 3TP 4SP BGP DEP 5AP.
8171 Power Cords FRU# CRU Power cord (models ABU ACU AGS ADU AEU AHS AHP AFU 1JU 1KU 2RU 2RF 2SU 2TU 2TF 2UU 2WS 2WP 2W A 2WT 2XU 57U 57G 58U 58F 58S 58P 58D 58G 58A 58T 58V 59G 5AU 5AF 5AS 5AP 5CU 5D.
8171 W indows XP Home Recovery CDs FRU # CRU KR (models A7K 18K 19K BBK BCK D5K A9K AAK 1DK 1EK 2HK 2JK 3QK 2VK 5BK 63K) 30R4698 * KR (models A7K 18K 19K BBK BCK D5K) 27K6742 * CS (models B8C D9C BLC .
8171 W indows XP Pro Recovery CDs FRU # CRU PO (models 21G 29G 31G 3AG 3CG 3FG B4G D1G 4QG 57G 58G 59G 4XG 64G 6AG 6JG BMG BPG DJG) 39J6615 * RU (models 21G 29G 31G 3AG 3CG 3FG B4G D1G 4QG 57G 58G 59G.
Machine T ype 8172 1 6 7 8 9 5 10 11 12 13 14 4 3 2 Item # 8172 FRUs FRU# CRU 1 Cover (all models) 26K1217 ** 2 Power Supply (225 W att) (models CTO 31U 31F 31G 31M 31A 31T 31K 31J 32M 33M 31E 3FU 3FF.
Item # 8172 FRUs FRU# CRU 3 CD-ROM Drive 48X - Black w/o jack & vol (models CTO 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31J 32M 33M 31E A1M) 71P7385 * 3 CD-ROM Drive 48.
Item # 8172 FRUs FRU# CRU 3 DVD-ROM/CD-R W Combo Drive (48x/24x/48x/16x) (models CTO 21M B1M B2M) 26K5381 * 3 DVD-ROM/CD-R W Combo Drive (48x/24x/48x/16x) (models CTO 21M B1M B2M) 26K5429 * 3 DVD-ROM/.
Item # 8172 FRUs FRU# CRU 5 Rotating bay assembly (all models) 03R0285 * 6 Plastic bezel kit (all models) 26K1214 * 7 Diskette drive, Half Inch (slim) 1.
Item # 8172 FRUs FRU# CRU 9 2.66 GHZ Prescott P4 (models CT O) 29R721 1 ** 9 2.93 GHZ Prescott P4 (models CT O) 29R7213 ** 9 2.66 GHZ Prescott P4 (models CT O) 41D0670 ** 9 2.93 GHZ Prescott P4 (models CT O) 41D0671 ** 9 3.06 GHZ Prescott P4 (models CT O) 41D0672 ** 9 2.
Item # 8172 FRUs FRU# CRU 11 512MB PC2 3200 Memory DDR1 (models 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31J CTO 32M 33M 31E 3FU 3FF 3FS 3FP 3FL 3FD 3FY 3FG 3FM 3F A 3FQ 3FT.
8172 FRUs FRU# CRU Kensington Lock Spacer (all models) 41A7702 ** Planar I/O Shield Kit (all models) 41A7703 ** Battery (all models) 33F8354 * Universal Adapter Bracket 5.
8172 Keyboard (Preferred Pro Fullsize, PS/2, Stealth Black) FRU# CRU French (models CT O-G 31G 3FG 4SG 234G 58G 4XG 6AG BMG) 89P8310 * French Canadian 445 (models CT O-U 31F 3FF 34F 35F 58F 4XF 6AF BM.
8172 Power Cords FRU# CRU Power cord (EMEA, ANZ, ASEAN Eng, HK Eng) (models 31G 31H 3FG 3FH 34G 34H 35H 58G 58H 37H 38H 4XG 4XH 6AG 6AH BMG BMH) 14F0032 * Power cord (EMEA) (models 31G 3FG 34G 58G 4XG.
8172 W indows XP Pro Recovery CDs FRU # CRU GK (models 31G 3FG 4SG 234G 58G 4XG 6AG BMG) 39J6616 * SL (models 31G 3FG 4SG 234G 58G 4XG 6AG BMG) 39J6617 * JP (models 31J 3FJ 34J 58J 4XJ 6AJ BMJ) 30R476.
Machine T ype 8173 1 6 7 8 9 5 10 11 12 13 14 4 3 2 Item # 8173 FRUs FRU# CRU 1 Cover (all models) 26K1217 ** 2 Power Supply (225 W att) (models 31U 31F 31G 31M 31A 31T 31K 31J 31E CTO-U CTO-G) 24R256.
Item # 8173 FRUs FRU# CRU 3 CD-ROM Drive 48X - Black w/o jack & vol (models CTO 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31J 31E) 40Y8807 * 3 DVD-ROM 16X/48X - Black (mo.
Item # 8173 FRUs FRU# CRU 5 Rotating bay assembly (all models) 03R0285 * 6 Plastic bezel kit (all models) 26K1214 * 7 Diskette drive, Half Inch (slim) 1.44MB 3 Mode (models CTO-U CT O-G 31U 31F 31S 31P 31L 31D 31Y 31G 31M 31A 31Q 31T 31C 31B 31H 31V 31K 31J 31E) 36L8645 * 7 Diskette drive, Half Inch (slim) 1.
Item # 8173 FRUs FRU# CRU 10 System Board (Intel 915GV) 10/1000 w/ POV (models CT O-U CTO-G) 41X2838 ** 10 System Board (models CT O) 45C9896 ** 10 System Board (models CT O) 45C9895 ** 10 System Boar.
8173 FRUs FRU# CRU RJ1 1 connector adapter (Belgium) (All ’G’ models) 60H6046 * RJ1 1 connector adapter (Denmark) (All ’G’ models) 60H6047 * RJ1 1 connector adapter (Norway , Finland) (All ’.
8173 Keyboard (Preferred Pro Fullsize, PS/2, Stealth Black) FRU# CRU Slovak (models 31G) 89P8330 * Spanish (models 31G) 89P8331 * Swedish/Finn (models 31G) 89P8332 * Swiss F/G (models 31G) 89P8333 * T.
8173 W indows XP Pro Recovery CDs FRU # CRU PL (models 31G) 39J6609 * PO (models 31G) 39J6615 * RU (models 31G) 41D1 198 * RE (models 31G) 41D1223 * HU (models 31G) 39J6614 * CZ (models 31G) 39J6610 *.
Machine T ype 8420 1 2 3 4 5 6 7 8 9 10 Item # 8420 FRUs FRU# CRU 1 To p Cover Asm (all models) 89P6730 * 2 Heat sink (models 21P 31A 32P CTO 32U 11 G 22G 23G 31Q 33G 34G 42P 43G 52P 53G 31C 31B 31H 3.
Item # 8420 FRUs FRU# CRU 5 3.06 GHZ Celeron Pr escott P4 346 (models CTO) 39J9405 ** 5 3.2 GHZ Celeron Pr escott P4 351 (models CTO) 41D0533 ** 5 2.66 GHZ Prescott P4 (models CT O) 29R7223 ** 5 2.93GHZ Prescott P4 (models CT O) 29R7225 ** 5 2.66GHZ Celeron Pr escott P4 346 (models CTO) 41D0676 ** 5 2.
Item # 8420 FRUs FRU# CRU 8 CD-ROM Drive 48X - Black w/o jack & vol (models 21P 32P CTO 32U 31A 11 G 22G 31Q 33G 42P 52P 31C 31B 31H 31V 24U 35U) 71P7375 * 8 CD-ROM Drive 48X - Black w/o jack &.
Item # 8420 FRUs FRU# CRU 8 Multi-Burner Plus (Rambo VI) (models CTO) 40Y8909 * 9 3.5 ″ 1.44MB 2MODE Diskette drive wo/Bezel (models 21P 31A 32P CTO 32U 11 G 22G 23G 31Q 33G 34G 42P 43G 52P 53G 31C 31B 31H 31V 71G 72G 24U 35U 61G B1G D1G E1G F1G) 76H4091 * 9 3.
8420 FRUs FRU# CRU Cable, Power/LED (all models) 89P6739 * Battery , 3.0V (all models) 33F8354 * Universal Adapter Bracket 5.25 to 3.5-inch 32P4743 * Mouse, PS/2 - 2-button (Black) (models CTO) 24P038.
8420 Keyboards (Preferred Pro Fullsize) FRU# CRU German (models CTO-G 11 G 22G 23G 33G 34G 43G 53G 71G 72G 61G B1G D1G E1G F1G) 89P8313 * Greek (models CT O-G 11 G 22G 23G 33G 34G 43G 53G 71G 72G 61G .
8420 Power Cords FRU# CRU Power cord (EMEA, ANZ, ASEAN Eng, Kor ea) (models CTO-G 11 G 22G 23G 33G 34G 43G 53G 71G 72G 61G B1G D1G E1G F1G) 13F9978 * Power cord (EMEA, ANZ, ASEAN Eng, HK Eng) (models .
8420 W indows XP Pro Recovery CDs FRU # CRU Multilingual 1 (models 11 G 22G 23G 33G 34G 43G 53G 71G 72G 61G B1G D1G E1G F1G) 39J6215 * Multilingual 2 (models 11 G 22G 23G 33G 34G 43G 53G 71G 72G 61G B1G D1G E1G F1G) 39J6216 * Chapter 11 .
Machine T ype 8421 1 2 3 4 5 6 7 8 9 10 Item # 8421 FRUs FRU# CRU 1 To p Cover Asm (all models) 89P6730 * 2 Heat sink (models 21G 71G 72G 11 V B1G 75G D1G 76G E1G F1G 73G 74G) 89P6729 ** 3 256MB PC2 3.
Item # 8421 FRUs FRU# CRU 5 2.66 GHZ Prescott P4 (models CT O) 29R7223 ** 5 2.93GHZ Prescott P4 (models CT O 1 1V) 29R7225 ** 5 2.66GHZ Celeron Pr escott P4 346 (models CTO) 41D0676 ** 5 2.93GHZ Celeron Pr escott P4 351 (models CTO) 41D0677 ** 5 3.06GHZ Celeron Pr escott P4 (models CTO) 41D0678 ** 5 2.
Item # 8421 FRUs FRU# CRU 8 CD-ROM Drive 48X - Black w/o jack & vol (models CTO 1 1V) 40Y8807 * 8 DVD-ROM 16X/48X - Black (models CTO 21G 71G 72G B1G D1G E1G F1G 73G 75G) 33P3237 * 8 DVD-ROM 16X/4.
Item # 8421 FRUs FRU# CRU 9 3.5 ″ 1.44MB 2MODE Diskette drive (w/Bezel) (models 21G 71G 72G 11 V B1G D1G E1G F1G 73G 74G 75G 76G CTO) 40Y9105 * 9 3.5 ″ 1.44MB 2MODE Diskette drive (w/Bezel) (models 21G 71G 72G 11 V B1G D1G E1G F1G 73G 74G 75G 76G CTO) 39M0101 * 9 3.
8421 FRUs FRU# CRU RJ1 1 Connector adapter (Spain, Ireland) (all ’G’ models) 60H6043 * RJ1 1 Connector adapter (Austria) (all ’G’ models) 60H6045 * RJ1 1 Connector adapter (Belgium) (all ’G.
8421 Keyboards (Preferred Pro Fullsize) FRU# CRU Spanish (models 21G 71G 72G B1G D1G E1G F1G 73G 74G 75G 76G CTO-G) 89P8331 * Swedish/Finn (models 21G 71G 72G B1G D1G E1G F1G 73G 74G 75G 76G CTO-G) 89.
8421 W indows XP Pro Recovery CDs FRU # CRU RE (models 21G 71G 72G B1G D1G E1G F1G 73G 74G 75G 76G) 41D1223 * HU (models 21G 71G 72G B1G D1G E1G F1G 73G 74G 75G 76G) 39J6614 * CZ (models 21G 71G 72G B.
Machine T ype 8422 1 2 3 4 5 6 7 8 9 10 11 Item # 8422 FRUs FRU# CRU 1 Bezel (all models) 26K1 1 16 * 2 Chassis Asm (subd from 26K1 1 13) (all models) 26K1 160 ** 3 Power Supply 310 W att (models CTO .
Item # 8422 FRUs FRU# CRU 5 HDD 80GB 7200 rpm Serial ATA (models CTO 12M 14U 23B 23H 24U 25M 27M 28V 2AG 2BG 31B 33U 36G 37G 39G 42B 42H 45G 47G 53G 72G 75G 16A 16Q 16T 62G 64A 64Q 64T B1G D1G E1G F1G.
Item # 8422 FRUs FRU# CRU 9 3.0GHZ Prescott P4 (models CT O 21A 21Q 21T 22U 22G 23B 23H 24U 25M 26C 27M 28V 29G 2AG 2BG 2CG 2DG CCU 71G 72G 73G) 19R0496 ** 9 3.2GHZ Prescott P4 (models CT O 31B 31H 32A 32T 33U 34C 35U 35G 36G 37G 38G 39G 3AG 3BG CDU 33M 74G 75G 76G 3CM) 19R0497 ** 9 3.
Item # 8422 FRUs FRU# CRU 11 DVD-ROM 16X/48X - Black (models CTO 2AG 37G 44G 45G 53G 71G 74G 62G 77G B1G D1G E1G F1G) 26K5385 * 11 DVD-ROM 16X/48X - Black (models CTO 2AG 37G 44G 45G 53G 71G 74G 62G 7.
8422 FRUs FRU# CRU Shield, Blank Diskette drive (all models) 89P7700 ** Cable, Optical IDE (all models) 89P6734 * Cable, Diskette drive (all models) 26K1 128 * Cable, Front panel USB audio (all models.
8422 FRUs FRU# CRU Speaker Power brick - Argentina (models CT O-L) 01R2253 * Speaker Power brick - Korea (models B2K) 88P7687 * RJ1 1 Connector adapter (Spain, Ireland) (all ’G’ models) 60H6043 * .
8422 Keyboards (Preferred Pro Fullsize) FRU# CRU Hungarian (models CTO-G 15G 22G 29G 38G 44G 46G 54G 71G 72G 74G 75G 62G 77G B1G D1G E1G F1G) 89P8316 * Iceland (models CTO-G 15G 22G 29G 38G 44G 46G 54.
8422 Keyboards (Productivity USB) FRU# CRU Arabic (models 29G 38G 44G 46G 54G 73G 76G 61G CTO-G) 89P8801 * Arabic/French (models 29G 38G 44G 46G 54G 73G 76G 61G CT O-G) 89P8802 * Belgian/French (model.
8422 Power Cords FRU# CRU Power cord (EMEA, ANZ, ASEAN Eng, Kor ea) (models CTO-G 15G 22G 29G 2AG 2BG 2CG 2DG 35G 36G 37G 38G 39G 3AG 3BG 44G 45G 46G 47G 48G 49G 53G 54G 71G 72G 73G 74G 75G 76G 61G 62.
8422 W indows XP Pro Recovery CDs FRU # CRU NO (models 15G 22G 2AG 2BG 2CG 2DG 35G 36G 37G 39G 3AG 3BG 45G 47G 48G 49G 53G 71G 72G 74G 75G 62G 77G B1G D1G E1G F1G) 39J6606 * PL (models 15G 22G 2AG 2BG.
8422 W indows XP Home Recovery CDs FRU # CRU TR (models 29G 38G 44G 46G 54G 73G 76G 61G) 39J6781 * GK (models 29G 38G 44G 46G 54G 73G 76G 61G) 39J6784 * CS (models 26C 34C D2C E2C F2C) 30R4705 * TW (models 28V) 30R4712 * Chapter 11 .
Machine T ype 8423 1 2 3 4 5 6 7 8 9 10 11 Item # 8423 FRUs FRU# CRU 1 Bezel (all models) 26K1 1 16 * 2 Chassis Asm (subd from 26K1 1 13) (all models) 26K1 160 ** 3 Power Supply 310 W att (models 42M .
Item # 8423 FRUs FRU# CRU 5 HDD 80GB 7200 rpm Serial ATA (models 31S 31D 31Y 21S 21D 21Y CT O 21U 21A 21T 25U 25F 31U 33A 33T 34M 36U 36F 23M A1U A1F A1S A1L A1D A1Y 15A 15G 15T 38G 39S 39L 39D 39Y 44.
Item # 8423 FRUs FRU# CRU 9 3.06GHZ Celeron Pr escott P4 (models CTO) 29R8208 ** 9 2.53GHZ Celeron Pr escott P4 326 (models CTO) 39J9397 ** 9 2.66 GHZ Celeron Pr escott P4 331 (models CTO) 39J9399 ** 9 2.8 GHZ Celeron Pr escott P4 336 (models CTO) 39J9401 ** 9 2.
Item # 8423 FRUs FRU# CRU 10 3.5 ″ 1.44MB 2MODE Diskette drive (w/Bezel) (models 78J 79J A2J A3J 7AJ 7BJ 7CJ 7DJ 1FJ 1GJ 1HJ 1JJ B4M B5M B6M 2EU 2EF 7HG) 40Y9107 * 10 3.5 ″ 1.44MB 2MODE Diskette drive (w/Bezel) (models 78J 79J A2J A3J 7AJ 7BJ 7CJ 7DJ 1FJ 1GJ 1HJ 1JJ B4M B5M B6M 2EU 2EF 7HG) 24P3889 * 10 3.
Item # 8423 FRUs FRU# CRU 11 DVD-ROM/CD-R W Combo Drive (48x/32x/48x/16x) (models 41S 41D 41Y 42M 32S 32D 32Y CTO 25U 25F 32U 33A 33T 36U 36F 41U 41F 43B 43H A1U A1F A1S A1L A1D A1Y 38G 39S 39L 39D 39.
8423 FRUs FRU# CRU Front Panel Car d (all models) 26K1 125 * Device Retaining Clips (all models) 13N2449 * System board shield (all models) 89P6727 * Miscellaneous Hardwar e kit (all models) 89P6737 * Cable, 1394 Front (all models) 89P6738 ** Retention module (all models) 89P6725 * Battery , 3.
8423 FRUs FRU# CRU Speaker Power brick - ANZ (models 42M 21A 33A 34M 35M 23M 15A 3AM 61A B4M B5M B6M) 25P5705 * Speaker Power brick - India, South Africa (models 61Q) 32P3181 * Speaker Power brick - A.
8423 Keyboards (Preferred Pro Fullsize) FRU# CRU Greek (models CT O-G 27G 71G 72G 15G 37G 38G B1G D1G E1G F1G 73G 74G 75G 76G 77G) 89P8314 * Hebrew (models CT O-G 27G 71G 72G 15G 37G 38G B1G D1G E1G F.
8423 Keyboards (Preferred Pro Fullsize) FRU# CRU Y ugoslav/Latin (models CTO-G 27G 71G 72G 15G 37G 38G B1G D1G E1G F1G 73G 74G 75G 76G 77G) 89P8339 * 8423 Keyboards (Productivity USB) FRU# CRU US Engl.
8423 Fingerprint Keyboards FRU# CRU Arabic (models 7HG) 89P9001 * Arabic/French (models 7HG) 89P9002 * Belgian/French (models 7HG) 89P9003 * Belgian/UK (models 7HG) 89P9004 * Bulgarian (models 7HG) 89.
8423 Power Cords FRU# CRU Power cord (EMEA, ANZ, ASEAN Eng, HK Eng) (models CT O-G 43H 27G 71G 72G 15G 37G 38G B1G D1G E1G F1G 73G 74G 75G 76G 77G 7HG) 14F0032 * Power cord (EMEA) (models CT O-G 27G 7.
8423 W indows XP Pro Recovery CDs FRU # CRU Multilingual 1 (models 27G 71G 72G 37G 38G B1G D1G E1G F1G 73G 74G 75G 76G 77G 7HG) 39J6215 * Multilingual 2 (models 27G 71G 72G 37G 38G B1G D1G E1G F1G 73G.
Machine T ype 8424 1 6 7 8 9 5 10 11 12 13 14 4 3 2 Item # 8424 FRUs FRU# CRU 1 Cover (all models) 26K1217 ** 2 Power Supply (225 W att) (models CTO 11 U 21U 71G 72G 73G 74G CAU CBU CCU 25M 32M 77G 78.
Item # 8424 FRUs FRU# CRU 3 DVD-ROM 16X/48X - Black (models 23C 71G 73G CTO 79G 7AG 7BG) 71P7357 * 3 DVD-ROM 16X/48X - Black (models 23C 71G 73G CTO 79G 7AG 7BG) 26K5385 * 3 DVD-ROM 16X/48X - Black (m.
Item # 8424 FRUs FRU# CRU 4 HDD 80GB 7200rpm Serial ATA (models 23C 72G 74G 77G 78G 79G 7AG CT O A1M 33M 34M 7BG 7DG 7EG 7FG A2M A3M 38C 3DU 3BM 3CM 7GG 7HG 7JG 7KG 7LG 12J 13J 14J 15J 16J 3EJ 3FJ) 40.
Item # 8424 FRUs FRU# CRU 9 3.0GHZ Prescott P4 531 (models CT O 37U 38C 3DU 7GG C2U 3EJ 3FJ) 41D0527 ** 9 3.2GHZ Prescott P4 541 (models CT O 39C 7HG C3U) 41D0529 ** 9 3.4GHZ Prescott P4 551 (models CT O) 41D0531 ** 9 3.0 GHZ Prescott P4 (models 77G 7AG CT O 7EG 3AM 3BM 3CM 7JG 7KG) 39J6583 ** 9 3.
8424 FRUs FRU# CRU Mouse, optical wheel (models 11 U 21U 23C 31C 71G 72G 73G 74G 25M 32M 77G 78G 79G 7AG CTO A1M 33M 34M 7BG 7DG 7EG 7FG A2M A3M 36U 37U 38C 3DU 39C 3AM 3BM 3CM 7GG 7HG 7JG 7KG 7LG A4J.
8424 Keyboards (Preferred Pro Fullsize) FRU# CRU French (models 71G 72G 73G 74G 77G 78G 79G 7AG CT O-G 7BG 7DG 7GG 7HG 7JG 7KG 7LG) 89P8310 * French Canadian 445 (models CT O-U) 89P831 1 * French Cana.
8424 Keyboards (Preferred Pro Fullsize) FRU# CRU US Euro (models 71G 72G 73G 74G 77G 78G 79G 7AG CT O-G 7BG 7DG 7GG 7HG 7JG 7KG 7LG) 89P8338 * Y ugoslav/Latin (models 71G 72G 73G 74G 77G 78G 79G 7AG C.
8424 Power Cords FRU# CRU Power cord (models 11 U 21U 71G 72G 73G 74G CAU CBU CCU 77G 78G 79G 7AG 7BG 7DG 7EG 7FG 36U 37U 3DU 7GG 7HG 7JG 7KG 7LG C1U C2U C3U) 6952301 * Power cord (models 32M A1M 33M .
8424 W indows XP Pro Recovery CDs FRU # CRU NO (models 71G 72G 73G 74G 77G 78G 79G 7AG 7BG 7DG 7EG 7FG 7GG 7HG 7JG 7KG 7LG) 39J6606 * PL (models 71G 72G 73G 74G 77G 78G 79G 7AG 7BG 7DG 7EG 7FG 7GG 7HG.
Machine T ype 8425 1 6 7 8 9 5 10 11 12 13 14 4 3 2 Item # 8425 FRUs FRU# CRU 1 Cover (all models) 26K1217 ** 2 Power Supply (225 W att) (models 21J 22J 23J 32E 32J 33J 34J 71G 72G 31A 31T A1J A2J A3J.
Item # 8425 FRUs FRU# CRU 3 CD-ROM Drive 48X - Black w/o jack & vol (models 21J 23J 32E 32J 34J 71G 72G CTO A1J A2J A4J 11 J 12J 24J 35J 15S 19S 19J 1AJ A5J A7J A9J AGJ AAJ ACJ ADJ AFJ B1J B3J BBJ.
Item # 8425 FRUs FRU# CRU 3 DVD-ROM/CD-R W Combo Drive (48x/32x/48x/16x) (models CTO 7DG 7EG 7FG A6J A8J ABJ AEJ B2J B4J B6J B8J 1EJ 1KJ 1PJ 2BJ 2FJ 39J 44J 1VJ AMJ ANJ BGJ BHJ BNJ BPJ 1UJ 2LJ 2NU 2NF.
Item # 8425 FRUs FRU# CRU 7 Diskette drive, Half Inch (slim) 1.44MB 3 Mode (models A5J A6J A7J A8J A9J AGJ AAJ ABJ ACJ ADJ AEJ AFJ B1J B2J B3J B4J BBJ BCJ B5J B6J B7J B8J B9J BAJ 1CJ 1DJ 1EJ 1GU 1HJ 1JJ 1KJ 1MJ 1NJ 1PJ 27U 28U 29J 2AJ 2BJ 2CJ 2EJ 2FJ 38U 39J 3AJ 3DJ 44J 45J 47U 48J) 39M0107 * 7 Diskette drive, Half Inch (slim) 1.
Item # 8425 FRUs FRU# CRU 9 3.2 GHZ Prescott P4 (models 32E 32J 33J 34J 72G 31A 31Q 31T 31B 31H 31V CT O 35J 36S 37M 38U 39J 3AJ 3CS 3DJ 76U) 19R0491 ** 9 3.4 GHZ Prescott P4 (models CT O 44J 45J 47U 48J 49S 77U) 19R0492 ** 9 2.8 GHZ Prescott P4 (models CT O 1SJ 1TJ 1UJ) 41D0708 ** 9 3.
8425 FRUs FRU# CRU Cable, Diskette drive (all models) 03R0297 * C2 Cable (Squall) (models 71G 72G 73G 15S 18S 19S 25S 36S CTO 3CS 49S 3GA 3GQ 3GT) 09K9827 * Shield, 5.
8425 FRUs FRU# CRU RJ1 1 connector adapter (Netherlands) (All ’G’ models) 60H6053 * RJ1 1 connector adapter (Sweden) (All ’G’ models) 60H6054 * RJ1 1 connector adapter (Switzerland) (All ’G.
8425 Keyboards (Preferred Pro Fullsize) FRU# CRU UK English (models 71G 72G 73G CTO-G) 89P8337 * US Euro (models CT O-G 27G 71G 72G 73G CTO-G) 89P8338 * Y ugoslav/Latin (models 71G 72G 73G CTO-G) 89P8.
8425 W indows XP Pro Recovery CDs FRU # CRU US (models 32E 71G 72G 73G 1GU 27U 28U 38U 47U 2NU 2RU 2TU 3FU 3HU 4AU 78U 79U 7AU) 39J6597 * FR (models 71G 72G 73G 2NF 2RF 2TF 3FF 3HF 4AF) 39J6598 * GR (.
Machine T ype 8427 1 2 3 4 5 6 7 8 9 10 11 Item # 8427 FRUs FRU# CRU 1 Bezel (all models) 26K1 1 16 * 2 Chassis Asm (subd from 26K1 1 13) (all models) 26K1 160 ** 3 Power Supply 310 W att (models 12U .
Item # 8427 FRUs FRU# CRU 6 256MB PC2 3200 Memory (400mhz DDR2) (models 12U 21U 22U 22F 31U 31F 23G 71G 72G 73G 74G 75G 76G 13U 13F 32U 32F 33U 41U 77G 14U 14F 14S 24U 24F 15U CTO 16U 16F) 73P3220 * 6.
Item # 8427 FRUs FRU# CRU 9 3.0GHZ Prescott P4 (models CT O) 39J6589 ** 9 3.2GHZ Prescott P4 (models CT OG) 39J6591 ** 9 3.4GHZ Prescott P4 (models CT O) 39J6593 ** 9 3.
Item # 8427 FRUs FRU# CRU 11 DVD-ROM/CD-R W Combo Drive (48x/32x/48x/16x) (models CTO 17U 17F 18U 18F) 39M3539 * 11 DVD-ROM/CD-R W Combo Drive (48x/32x/48x/16x) (models CTO) 40Y8781 * 11 DVD-ROM/CD-R .
8427 FRUs FRU# CRU Mouse, Optical Wheelmouse, USB 400 DPI (models 12U 21U 22U 22F 31U 31F 23G 71G 72G 73G 74G 75G 76G 13U 13F 32U 32F 33U 41U 77G 14U 14F 14S 24U 24F 15U CTO 16U 16F 17U 17F 18U 18F) 89P5089 * PCI Modem Card (Soft), AT X V .
8427 Keyboards (Preferred Pro Fullsize) FRU# CRU Iceland (models 23G 71G 72G 74G 75G 77G CTO-G) 89P8317 * Italian 141 (models 23G 71G 72G 74G 75G 77G CTO-G) 89P8318 * Italian 142 (models 23G 71G 72G 7.
8427 Keyboards (Productivity USB) FRU# CRU Romanian (models 73G 76G CTO-G) 89P8826 * Romanian (models 73G 76G CTO-G) 89P8827 * Russian/Cyrillic (models 73G 76G CTO-G) 89P8828 * Serbian/Cyrillic (model.
8427 W indows XP Home Recovery CDs FRU # CRU HU (models 73G 76G) 39J6782 * CZ (models 73G 76G) 39J6778 * TR (models 73G 76G) 39J6781 * GK (models 73G 76G) 39J6784 * SL (models 73G 76G) 39J6785 * 8427 .
336 Hardwar e Maintenance Manual.
Chapter 12. Additional Service Information This chapter provides additional information that the service r epresentative might find helpful. Security features Security features in this section include.
1. Click Start from the desktop, then Programs . 2. Select SystemV iew Agent 3. Select the Serial Number Information icon 4. Click the plus sign to expand. 5. Select the component you want to view or edit. 6. Double click on the component you want to change.
5. On the Flash BIOS Update page, scroll down to locate the .txt file for the flash from the operating system version. Click the .txt file. 6. Print these instructions. This is very important because these instructions ar e not on the screen after the download begins.
Power management Power management reduces the power consumption of certain components of the computer such as the system power supply , processor , hard disk drives, and some monitors.
Recovering software using the Rescue and Recovery program The Rescue and Recovery program pr ovides an environment that runs independently of the W indows operating system and is hidden from the W indows operating system.
342 Hardwar e Maintenance Manual.
Appendix. Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area.
vary significantly . Some measurements may have been made on development-level systems and there is no guarantee that these measur ements will be the same on generally available systems. Furthermore, some measur ements may have been estimated through extrapolation.
.
Part Number: 19R0486 Printed in USA (1P) P/N: 19R0486.
Een belangrijk punt na aankoop van elk apparaat Lenovo 8098 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Lenovo 8098 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Lenovo 8098 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Lenovo 8098 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Lenovo 8098 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Lenovo 8098 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Lenovo 8098 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Lenovo 8098 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
