Gebruiksaanwijzing /service van het product CDR-190 van de fabrikant Lenoxx Electronics
Ga naar pagina of 16
® COMP ACT DISC PLA YER WITH AM/FM CLOCK RADIO OPERA TING INSTRUCTIONS PLA YS ALL MUSIC COMP ACT DISCS FULL Y PROGRAMMABLE CD PLA YER WITH REPEA T RECEIVES AM/FM BROADCASTS W AKE UP T.
SAFETY INSTRUCTIONS The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
SAFETY INSTRUCTIONS EXAMPLE OF ANTENNA GROUNDING AS PER NEC - NATIONAL ELECTRICAL CODE Do not apply oil or petroleum products or solvents to any part of this set. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
1. Setting the Clock 1 Connect the AC power cord into a live wall outlet. 3 Hold the Time Button down, and press the Minute Button until the right minute time shows in the display . Hold the T ime Button down, and press the Hour Button, until the right hour time shows in the display .
2. Playing a CD 1 Slide the Function Switch to CD position, and the Mode Switch to ON position. 3 Close the CD Door by pushing it down at the position marked PUSH CLOSE. 4 PU S H OPEN Press the CD Door Open Button to open the CD Door and place the CD in the CD compartment.
Use these buttons for additional operations T o Press or Adjust Adjust the volume V olume Control Stop playback Pause playback CD track number will flash during pause. Press again to resume play after pause. Go to the next track Go back to the previous track Locate a point in a song or while playing, press and hold down until you find the point.
4. Playing CD tracks repeatedly (Repeat Play) T o repeat Press (during play) a single track (song) Press the Prog/Repeat Button once all the tracks (all songs) Press the Prog/Repeat Button twice 1. Slide the Function Switch to CD position, and the Mode Switch to ON position.
5. Playing CD in programmed or random order 1. Programmed Play Y ou can make a program of up to 16 tracks in the order you want them to be played. 1. Slide the Function Switch to CD position, and Mode Switch to ON. Make sure the CD is stopped. 2. Press the Program Button.
6. Listening to the radio Connect the supplied AC power cord (see Setting the Clock ). Slide the Function Switch to RADIO, and the Mode Switch to ON position. 1 2 3 Slide the Band Switch to the proper band position that you want. Tune into the station you prefer using the T uning Control.
T o improve broadcast reception FM antenna Fully stretch out the FM antenna for FM reception. Reorient the player itself for AM reception. Or locate the set near a window .
8. W aking up to alarm or music 1. Set Alarm Time 3. Waking up to CD 4. Waking up to radio 1. Hold the Alarm button. 2. Press the Hour button to select correct hour time. Release the Hour Button but continue to press the Alarm Button. 3. Press the Minute button for correct minute time.
9. Snooze and Sleep functions 1. T o sleep extra 9 minutes AU T O O N AL AR M CD OF F RA DI O 1. Make sure Mode Switch is set to AUTO or ALARM position. 2. Set the Function Switch to CD or RADIO as you prefer. Going to Sleep with music S LEEP S L EEP HO U R Press the Sleep and Hour Button, the music will start and play for 1 hour and 59 minutes.
Precautions On safety As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only . Should any solid object or liquid fall into the player , unplug the player , and have it checked by qualified personnel before operating it any further.
Precautions (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
T roubleshooting Problem Remedy The power is not on. Connect the AC power cord to a wall outlet securely . Make sure that outlet has power . There is no sound. Make sure the Function Switch is at the right position as you want. Adjust the volume.
Specification GENERAL DESCRIPTION Power source: AC 120V , 60Hz 10W atts DC 9V (optional - for clock backup) Speakers: 2-4 8 ohm Output power: 1.5W Dimensions: Width: 10 1 / 2 Depth: 6 1 / 4 .
Een belangrijk punt na aankoop van elk apparaat Lenoxx Electronics CDR-190 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Lenoxx Electronics CDR-190 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Lenoxx Electronics CDR-190 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Lenoxx Electronics CDR-190 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Lenoxx Electronics CDR-190 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Lenoxx Electronics CDR-190 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Lenoxx Electronics CDR-190 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Lenoxx Electronics CDR-190 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
