Gebruiksaanwijzing /service van het product SL-328 van de fabrikant Lenoxx
Ga naar pagina of 22
® WITH DIGIT AL RADIO & BASS REFLEX SPEAKERS MODEL SL-328 OPERA TING INSTRUCTIONS DIGIT AL RADIO WITH PRESETS PLA YS MUSIC COMP ACT DISCS FULL Y PROGRAMMABLE CD PLA YER WITH REPEA T P.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ADDITIONAL SAFETY INSTRUCTIONS 1 . Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2 . Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
POWERING UP TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plug is polarized and only fits one way into the wall outlet. 3 T o a wall outlet NOTE: One blade of plug and outlet is wider .
REMOTE CONTROL Y ou can control the player with the provided REMOTE control. Slide the battery cover to remove. Insert two size AAA batteries (not included) correctly so that the + and - polarities match the polarity diagrams inside the battery compartment.
CLOCK SETTING 3&5 2,4&6 1 4 Press the TIME/TUNING switches to select the correct hour time. Observe the AM & PM indicators, advance the time 12 hours to change AM to PM. 2 Once the set is connected with the AC power , the display will show as right: 3 Press the PROGRAM(STORE) switch to accept the hour time and switch to minute setting.
1 Press the CD switch, the display will show six zeros 0. 4 1 2 3&4 Press the CD DOOR OPEN/CLOSE button to open the CD DOOR and place the disc in the CD compartment. The label side of the CD should face outward. 2 Connect the AC power cord (see page 3).
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Press or Adjust Adjust the volume VOLUME + or VOLUME - button Stop playback Pause playback The elapsed playing time will flash during pause.
REPEA T PLA Y PLA YING CD SONGS (TRACKS) OVER AND OVER 2. Press the CD switch. 3. Select the track by pressing or , and then press . 4. Press the CD REPEA T button. T o repeat Press a single track (song) Press the REPEA T button twice all the tracks (all songs) Y ou can play CD tracks over and over in normal or programmed play modes (see page 9).
Y ou can make a program of up to 20 tracks in the order you want them to be played. 9 SELECTING YOUR OWN MUSIC PLA YING ORDER (Programmed Play) NOTE : Programming is only done during stop mode. 1 2 3 4 5 During STOP mode, press the PROGRAM (STORE) button.
LISTENING TO THE RADIO Connect the AC power cord (see page 3). 1 1 2 3 Press the BAND switch to choose the proper band (AM or FM ) that you want. 4 STEREO will light up when receiving FM Stereo broadcasts. 10 Press the RADIO switch. Press the POWER switch, the AC POWER ST ANDBY INDICA TOR will be off.
PRESETTING RADIO ST A TIONS 3 Press the PROGRAM (STORE) button again to confirm, the station now broadcasting is stored into that preset memory location. MEMORY disappears from the display . 4 Repeat the above steps to store other 19 stations into memory .
12 LISTENING TO THE PRESET ST A TIONS (after you programmed them) Connect the AC power cord (see page 3). 3 Press the AM/FM BAND switch to select the desired band. 1 Press the POWER switch, the dial will light. 4 Press the PRESET (REPEA T) switch several times to choose a memory location (01-20).
PLA YING A T APE Connect the AC power cord (see page 3). Press the STOP/EJECT button to open the tape compartment and insert a recorded tape as shown. 3 2 3 13 1 1 2 Press the T APE switch. Press the POWER switch, the dial will light up. 4 4 5 When the set finishes playing this side of the tape, the set will stop.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Stop playback Eject the cassette Press or Adjust Adjust the volume VOLUME + or VOLUME - switch Fast forward or rewind the tape F AST FORW ARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause.
RECORDING ON A T APE Connect the AC power cord (see page 3). Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM or CD) you want to record. 1 3 1 2 T o record from the CD player , insert a CD and follow the steps to play a CD (see page 6).
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the player Press the STOP/EJECT button and press the POWER switch to off, the AC POWER ST ANDBY INDICA TOR will go on. TIP Press or Adjust Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording.
PRECAUTIONS On Safety As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only . Should any solid object or liquid fall into the player , unplug the player , and have it checked by qualified personnel before operating it any further .
PRECAUTIONS (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens becomes dirty , it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower .
TROUBLE SHOOTING Problem Remedy The power is not on. Connect the AC power cord to a wall outlet securely . Make sure to press the right function switch as you want. Adjust the volume. Unplug the headphones when listening through speakers.
SPECIFICA TION General Description Power source: AC 120V , 60Hz 25 Watts Output power: 5.0W/channel Dimensions (approx.): 6 1 / 4 10 11 6.6LBs CD Section Plays disc type: Any normal CD used in portable players Laser wavelength: 760 - 800 NM Tracking method: 3 - spot error detection 3.
Een belangrijk punt na aankoop van elk apparaat Lenoxx SL-328 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Lenoxx SL-328 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Lenoxx SL-328 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Lenoxx SL-328 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Lenoxx SL-328 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Lenoxx SL-328 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Lenoxx SL-328 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Lenoxx SL-328 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
