Gebruiksaanwijzing /service van het product FSW-1611TX van de fabrikant LevelOne
Ga naar pagina of 18
LevelOne FSW - 1611TX 16Port 10/100Mbps 13 ” Fast Ethernet Switch USER'S GUIDE.
2 FCC WARNING This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of FCC Rules, which are designed to provid e reasonable protection against electromagnetic interference in a commercial environment.
3 T ABLE OF C ONTENTS UNPACKING INFORMATIO N ----------------------------------- 4 PROD UCT INTRODUCTION ------------------------------------- 5 FAST ETHERNET TECHNO LOGY -----------------------------.
4 A. UNPACKING INFO RMATION Thank you for purchasing LevelOne FSW - 1611TX 16Port 10/100Mbps 13 ” Fast Ethernet Switch . Before continuing, please check the contents of the product package.
5 B. PRODUCT INTRODUCTION This chapter describes the features of the Switch and some background information about Ethernet/Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks.
6 segments. The switch, without interfering with any other segments, automatically forwards traffic t hat needs to go from one segment to another. By doing this the total network capacity is multiplied, while still maintaining the same network cabling and adapter cards.
7 The Swit ches are a perfect choice for site planning to upgrade to Fast Ethernet in the future. Ethernet workgroups can connect to the Switches now, and change adapters and hubs anytime later without needing to change the Switches or reconfigure the network.
8 The Front Panel LevelOne 16Port 10/100Mbps 13 ” Fast Ethernet Switch Port Speeds 100/10Mbps TP Ports Each 100/10Mbps TP port provides an Auto - Negotiation function that senses for the attached device's maximum operating speed and automatically sets the Switch to operate at that speed.
9 cabling. Status LEDs This LevelOne 16Port 10/100Mbps 13” Fast Ethernet Switch comes with a complete range of LEDs. The table below lists each LED’s name, color and a brief description of its function.
10 Note: To reset the s witch, Remove the power cord and re - attach it . a) The switch must be reset when the MAC Address table needs to be rebuilt. b) The switch must be reset when the fiber port Full/Half – Duplex modes are changed.
11 C. INSTALLATION This Le velOne 16Port 10/100Mbps 13” Fast Ethernet Switch is "Plug & Play." They do NOT require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power.
12 2. Use the oth er provided screws to secure the Switch to the rack..
13 D. HELPFUL SUGGESTIONS Prior to Installation Before installing this LevelOne FSW - 1611TX 16Port 10/100Mbps 13” Fast Ethernet Switch and connecting it to network devices, it is important to plan t he network's layout.
14 they can receive data. • In Full - Duplex mode data can be transmitted and received at the same time. However: a) Full - Duplex transmission is only possible between two devices with a dedicated link ( e.g., Switch - Switch, Switch - PC) b) Both devices must have Full - Duplex capability c) Both devices must be set to Full - Duplex (e.
15 10Mbps, with Auto - Negotiation 20Mbps Bandwidth (10BASE - T, Full - Duplex) F Helpful Warning: If the attached device is set to a fixed mode (ex: Forced Full - Duplex) it will not operate as an Auto - Negotiation device. MAC Address Table Every Ethernet data packet includes both source and destination addresses.
16 E. Troubleshooting I. Link LED does not lit after cable is connected to the port. Ø Verify that the other end of the cable is connected to a device that is powered on and on - line. Ø For TP cable co nnection to another Switch or Hub, verify that only one end of the cable is connected to a “Crossover” port.
17 ALWAYS CHECK THAT: Ø CABLE AND LINK DISTANCES ARE WITHIN THE NETWORK'S SPECIFICATIONS Ø OVERALL NETWORK DIAMETERS ARE WITHIN THE NETWORK'S SPECIFICATIONS.
18 F. PRODUCT SPECIFICATIONS Models FSW - 1611TX Standards • 100BASE - TX IEEE 802.3u • 10BASE - T IEEE 802.3 Ports • Sixteen (16) 100BASE - TX/10BASE - T Media Support • 100BASE - TX Category.
Een belangrijk punt na aankoop van elk apparaat LevelOne FSW-1611TX (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen LevelOne FSW-1611TX heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens LevelOne FSW-1611TX vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding LevelOne FSW-1611TX leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over LevelOne FSW-1611TX krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van LevelOne FSW-1611TX bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de LevelOne FSW-1611TX kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met LevelOne FSW-1611TX . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
