Gebruiksaanwijzing /service van het product 23CAV42K-D van de fabrikant LG
Ga naar pagina of 48
ww w .lg.c om 23CA V42K Please r ead the safe t y inf ormation carefully bef or e using the product . CL OUD Monit or(LED L CD Monit or) Model list English O WNER'S MANU AL CL OUD MONIT OR (LED L.
2 ENG English T able of Contents T ABLE OF CONTENTS 3 ASSEMBLING AND PREP ARING 3 Unpacking 4 Parts and buttons 5 Lifting and moving the Monitor 5 Setting Up the Monitor set 5 - Attaching the Stand Ba.
3 ENG English ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product.
4 ENG English ASSEMBLING AND PREP ARING 1 1 MENU AUTO INPUT EXIT CLOUD 92/ Parts and buttons Power Indicator y LED On : Power is on y LED Off: Power is off Front Side Buttons Input Connectors (See p.
5 ENG English ASSEMBLING AND PREP ARING Setting Up the Monitor set Attaching the Stand Base 1 Place the monitor's screen face down. y To protect the screen from scratches, cover the surface with a soft cloth. 3 Using a coin, turn the screw clockwise to se- cure the stand base.
6 ENG English ASSEMBLING AND PREP ARING Detaching the stand body 1 Place the monitor's screen face down. T o protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver , remove the four screws and detach the stand from the monitor .
7 ENG English ASSEMBLING AND PREP ARING Mounting on a table 1 Lift the monitor and place it on the table in an upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation. 2 Connect the adaptor to the monitor , then plug the power cord into the wall outlet.
8 ENG English ASSEMBLING AND PREP ARING Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor . For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www .
9 ENG English ASSEMBLING AND PREP ARING Swivel stand y Image shown may differ from your Monitor set. 1 Swivel 90 degrees and adjust the angle of the Monitor set to suit your view . 1 Lift the monitor to its highest height to utilize the Pivot function.
10 ENG English ASSEMBLING AND PREP ARING Installing the wall mount plate This monitor has a VESA compatible mount on the back. Most mounts will require an LG mounting plate. 1 Place the monitor's screen face down. T o protect the screen from scratches, cover the surface with a soft cloth.
11 ENG English ASSEMBLING AND PREP ARING y Unplug the power cord before moving or in- stalling the monitor to avoid electric shocks. y Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury.
12 ENG English USING THE MONITOR SET USING THE MONIT OR SET D - S U B I N c o n n e c t i o n - P C y This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer , without having to reconfigure anything or install any manual drivers.
13 ENG English USING THE MONITOR SET y Connect the input signal cable and tighten in the direction of the arrow. To prevent disconnection secure the cable tightly. y Do not press on the screen for a prolonged time. This may cause image distortion. y Do not display a still image on the screen for a prolonged time.
14 ENG English USING THE MONITOR SET y Peripheral devices are sold separately. y The USB ports on the left and bottom of the monitor can be used to connect the key- board, mouse, and other USB devices. y Cables with angled plugs may have clear- ance issues, use straight plugs when pos- sible.
15 ENG English CUSTOMIZING SETTINGS CUST OMIZING SETTINGS Accessing The Main Menus 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press to select the desired menu item. 3 T o change the settings of the selected item press the buttons on the front of the monitor .
16 ENG English CUSTOMIZING SETTINGS Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the " NEXT MENU " button to enter the more option settings.
17 ENG English CUSTOMIZING SETTINGS VOLU ME PICTURE 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Enter to PICTURE by pressing the ▼ button.
18 ENG English CUSTOMIZING SETTINGS COLOR 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select COLOR by pressing the ► button. 4 Enter to COLOR by pressing the ▼ button.
19 ENG English CUSTOMIZING SETTINGS VOLU ME DISPLA Y 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select DISPLA Y by pressing the ► button.
20 ENG English CUSTOMIZING SETTINGS OTHERS 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select OTHERS by pressing the ► button. 4 Enter to OTHERS by pressing the ▼ button.
21 ENG English CUSTOMIZING SETTINGS Each option is explained below . MENU > NEXT MENU > VOLUME Description VOLUME Adjusts the volume (only available in CLOUD mode). VOLU ME V olume 1 Press the VOL button at the bottom of the monitor to display the VOL OSD menu.
22 ENG English T roubleshooting TROUBLESHOOTING Nothing is displayed on the screen I s t he mo n it o r' s p o we r c o rd pl u gg e d i n? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator .
23 ENG English T roubleshooting The image is displayed abnormally . Does the display area appear un- centered? Pressing the AUTO button will automatically optimize the screen to the current display mode. Does the screen exhibit vertical lines? Pressing the AUTO button will automatically optimize the screen to the current display mode.
2 4 ENG English Specications PRODUCT SPECIFICA TION LCD Screen T ype 58.42 cm (23 inch) TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 58.
25 ENG English Product Specication Preset Mode Display Modes (Resolution) Horizontal Frequency (kHz) V ertical Frequency (Hz) Polarity (H/V) Remark 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1280 x 1024 63.
26 ENG English Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. y Using the monitor for a prolonged period of time can cause eye fatigue. Take a 10-minute break every hour.
27 ENG English Using CLOUD Solution USING CLOUD SOLUTION If the network is not properly connected (e.g., dur- ing portal boot up), or connection is being created, the "Network connection lost. W aiting for connec- tion …" message is displayed on the Connection screen.
28 ENG English Using CLOUD Solution If you select the Connect button, the connection session is started. When the connection is pend- ing, the "Discovering hosts, please wait…" message is displayed on the OSD local GUI. When the connection is established, the OSD local GUI will disappear and be replaced by the session image.
29 ENG English Using CLOUD Solution y Enable DHCP If the Enable DHCP option is selected, a device will be connected to the DHCP server . that al- locates the IP address, subnet mask, gateway IP address, and DNS server . If this option is disabled, the above parameters must be configured manu- ally .
30 ENG English Using CLOUD Solution <IPv6> T ab The IPv6 tab is used when the portal is connected to the network configured with the IP v6. <Figure 2-8: IPv6 Configuration> y Enable IPv6 If you select Enable IPv6, the portal in use can be connected to the network configured with the IPv6.
31 ENG English Using CLOUD Solution Label T ab The Label tab allows the administrator or host to add customized information to the portal. Discovery T ab The Discovery configuration tab allows the admin- istrator to easily find a portal in the PCoIP system.
32 ENG English Using CLOUD Solution Session T ab The Session tab allows the administrator to set the method to connect the device to a peer device. <Figure 2-1 1: Session Configuration> <Figu.
33 ENG English Using CLOUD Solution <Figure 2-13: Advanced Settings for Direct to Host> <Figure 2-14: Direct to Host + SLP Host Discovery Set- tings> y Direct to Host + SLP Host Discovery .
34 ENG English Using CLOUD Solution <Figure 2-15: Advanced Settings for Direct to Host + SLP Host Discovery> <Figure 2-16: View Connection Server Setting> y Enable Auto-Reconnect If this option is selected, reconnection is attempted automatically when a session is disconnected or the user is logged off.
35 ENG English Using CLOUD Solution y Prefer GSC-IS If this option is selected, the GCS-IS interface is used when a smart card supports more than one interface.
36 ENG English Using CLOUD Solution y View Connection Server with Auto-Logon In the Session tab, you can select to enable the user client to automatically access the VMware View Connection Server . T o do this, select V iew Connection Server with Auto-Logon for Connection T ype.
37 ENG English Using CLOUD Solution y View Connection Server + Kiosk Select View Connection Server + Kiosk to use the kiosk mode. Y ou can configure the V iew Connection Server + Kiosk mode using the Webpage Administration Interface.
38 ENG English Using CLOUD Solution y Port For the default setting, leave the port field empty . When the VMware View Connection Server uses the SSL authentication, enter 443 in the Port field. If the server where a user tries to access uses a port other than a general port, enter the port.
39 ENG English Using CLOUD Solution y Remember Username If this option is selected, the username which is previously used to access the VMware View Connection Server is automatically entered in the username field. y Use OSD logo for View banner If this option is enabled, you can change the OSD logo of PCoIP during the login.
40 ENG English Using CLOUD Solution y Enable Peer Loss Overlay If this option is selected, the "Network Con- nection Lost" message is displayed on the screen when it is confirmed that the network is disconnected. The display is the same as in the VDI environ- ment.
41 ENG English Using CLOUD Solution y Screen-Saver T imeout The Screen-Saver T imeout field allows the administrator to set a time limit for the screen saver . The time limit is defined in seconds. The maximum time is 9999 seconds. If it is set to 0 seconds, the screen saver will be turned off.
42 ENG English Using CLOUD Solution <Figure 2-29: Reset> <Figure 2-30: Event Log> Reset T ab The Reset tab allows the administrator to reset all configurable parameters stored in Flash. Diagnostics Window In the Diagnostics window , the administrator can access the window tab to diagnose the portal.
43 ENG English Using CLOUD Solution <Figure 2-31: Session Statistics> <Figure 2-32: PCoIP Processor> y The PCoIP Processor Uptime can also be viewed using the Webpage Administration Interface.
44 ENG English Using CLOUD Solution <Figure 2-33: Ping> <Figure 2-34: V ersion> y The Ping tab has no corresponding menu in to the Webpage Administration Interface of Section 1. NOTE y The version information can also be viewed using the Webpage Administration Interface.
45 ENG English Using CLOUD Solution <Figure 2-35: VMware View> <Figure 2-36: Mouse> y The OSD mouse cursor speed setting does not affect the mouse cursor settings when a PColP session is active unless the Local Key- board Host Driver function is being used.
46 ENG English Using CLOUD Solution <Figure 2-37: Keyboard> <Figure 2-38: Image> y The OSD keyboard setting does not affect the keyboard settings when a PColP session is active unless the Local Keyboard Host Driver function is being used. (see PColP Host Soft- ware User Guide for more information).
47 ENG English Using CLOUD Solution <Figure 2-39: Display T opology> <Figure 2-40: T ouch Screen> y It is applicable when the VMware View Con- nection Server version is 4.5 or later. NOTE y Display T opology T ab The Displa y T opol ogy tab allows the user to specify the position and alignment of a connected second- ary monitor .
Make s ure to re ad the Saf ety Preca utions before using th e product. Keep t he Owner' s Manual(C D) in an acces sible plac e for futu re refere nce. The m odel and s erial numb er of the SET is lo cated on t he back an d one sid e of the SET .
Een belangrijk punt na aankoop van elk apparaat LG 23CAV42K-D (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen LG 23CAV42K-D heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens LG 23CAV42K-D vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding LG 23CAV42K-D leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over LG 23CAV42K-D krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van LG 23CAV42K-D bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de LG 23CAV42K-D kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met LG 23CAV42K-D . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
