Gebruiksaanwijzing /service van het product LW2702 van de fabrikant LOREX Technology
Ga naar pagina of 72
Copyright © 2009 Lorex Technol ogy Inc. DIGITAL WIRELESS QUAD LCD SURVEILLANCE SYSTEM Instruction Manual www.lorexcctv.c om MODELS: LW2702 Series Engl ish Ve rsio n 1.0 WITH BUILT-IN VIDEO RECORDER/INTERCOM AND INDOOR/OUTDOOR MOTION CAMERA www.lorexcct v.
Important Safeguards 2 Thank you for purchasing the Digital Wi reless Quad View Monitoring System. This manual refers to the following products: • LW2702 Series Please visit us on the web for the most current Manuals, Quick Start Guides and Firmware.
www.lorexcctv.com LOREX IS COMMITTED TO FULFILLING YOUR SECURITY NEEDS BEFORE YOU START THIS PRODUCT MAY REQUIRE PROFESSIONAL INSTALLATION • We have developed user friendly products and documentation. Please read the Quick Start Guide and User Manual before you install this product.
www.lorexcctv.com AVANT DE COMMENCER ANTES DE EMPEZAR LOREX SE COMPROMETE A SATISFACER SUS NECESIDADES EN SEGURIDAD LOREX S’ENGAGE À SATISFAIRE VOS BESOINS SÉCURITAIRES ESTE PRODUCTO PUEDE EXIGIR .
NORTH AMERICA: 1-888-425-6739 (1-888-42-L OREX ) MEXICO: 1-800-514-6739 INTERNATIONAL: +800-425-6739-0 (Example: From the UK, dial 00 instead of +) Technical Support (for technical/installation issues.
NO DEVUELVA ESTE PRODUCTO A LA TIENDA 3 maneras sencillas d e comunicarse con nosotros : NE RETOURNEZ PAS CE PRODUIT AU MAGASIN 3 façons faciles d e nous contacter : L’AMÉRIQUE DU NORD: 1-888-.
Important Safeguards 3 Important Saf eguar ds In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too.
Important Safeguards 4 Service 13. Servicing - Do not attempt to service this video equipment yourself as openin g or removing covers ma y expose you to dangerous volt age or other hazards.
General Precautions 5 General Pr ecautions 1. All warnings and instruct ions in this m anual should be followed 2. Remove the plug from the outle t before cleaning . Do no t use liquid aerosol detergents. Use a water dampened cloth f or cleaning 3. Do not use this unit in humid or wet pla ces 4.
Features 6 Fe a t u re s Technology Ultra Digital Wireless techno logy featur es the latest advancement s in wireless video surveil lance Minimizes interferenc e with other devices such as wir.
Table of Cont ents 7 T abl e of Contents Getting Started ................................................................................................................................................ 9 LCD Monitor/Wirel ess Receiver ................
Table of Cont ents 8 Appendix A: System Specifications .............................................................................................................. 55 Appendix B: About Digital Wirel ess Technology ...................................
Getting Started 9 Getting Started The system comes with the following components: CHECK YOUR PACKAG E TO CONFIRM THAT YO U HAVE RECEIVED THE COMPL ETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
LCD Monitor/Wireless Receiver 10 LC D M o n i t o r / W i re le s s R e ce i ve r Rear Panel 1. Wireless Antenna : Position the antenna as needed for best reception. 2. Power : Slide bu tton to turn the LCD rec eiver ON/OFF. 3. MENU : Press to open th e Main M enu.
Camera 11 Camera 1. PIR Sensor : Passive IR motion sensor for more accurate motion recording. 2. Microphone : Built-in micr ophone under neath camera body. 3. Lens : Camera lens. 4. Night Vision IR : Night vision I R LEDs used fo r viewing in c omplete darkness.
Remote Cont rol 12 Remote Contr ol 1. 1/ : Move menu cursor UP; change time settings; start/pause playback; jum p to camera 1 while in Quad Mode; 2. Enter : Confirm menu selections. 3. 4/ : Move menu cursor LEFT; rewind playback; jump to camera 4 while in Quad Mode; decrease values in certain menu opti ons.
Installing the Camera 13 Installing the Camer a Before you in stall the c amera, careful ly plan wher e and how it will be position ed, and where you wi ll route the cable that connects the camera to the power adapter.
Connecting the LCD Receiver 14 Connecting the L CD Receiv er The LCD Receiver can be setup for use on a tabletop, or mounted to a wall or underneath a counter or cupboard. Table Mounting To set up the wireless receiver: 1. Attach the Tabletop Sta nd to the slot on the rear panel and turn counter clockwise until you hear one “click.
Connecting the LCD Receiver 15 3. Connect the cable from the power adapter to the 5V DC port on the bottom panel of the receiver, and then plug in the power adapter to an outlet or surge protector. 4. Place the receiver in a location that will have a clear reception to your camera*.
Connecting the LCD Receiver 16 Under-the-Co unter, Wall, or Ceiling Mounting To set up the wireless receiver: 1. Select a location to mount the receiver, i.e. under a counter or cupboard, wall or ceiling. The location should have a clear reception to your camera*.
Connecting the LCD Receiver 17 6. Connect the cable from the power adapter to the 5V DC port on the bottom panel of the receiver, and then plug in the power adapter to an outlet or surge protector. 7. Slide the power switch on the rear panel to the “ ON ” position.
Connecting the LCD Receiver 18 LED Indicators on the LCD Receiver Use the LED indicators on the LCD receiver to observe the status of the receiver, cameras, and SD card.
Using the System 19 Using the System By default, the camera included with your system is automatically paired to the wireless receiver. The camera and receiver will commun icate with one another once they are powered on.
Using the System 20 On-Screen Display (cont’d.) 1. Signal Indicator – The signa l indicator shows the strength of the signal being received from the camera. The number of bars in the Signal Indicat or shows the strength of th e signal – One or No Bars indicates the signal is poor, and 4 bars indicate a very strong si gnal.
Viewing Modes 21 Viewing Modes There are four different viewing modes available on the system: single channel viewing, Auto Sequence Viewing Mode (view individual channels automatically in sequence), Quad mode, and Screen Saver Mode.
22 Quad Mode Use Quad mode to view up to four cameras simultaneously. To enable/disable Quad mode: • Press the QUAD button . The Schedule Recording warning appears briefly on-screen (see figure 5.2), then the Quad display mode begins. NOTE : The si gnal indicator or SD card icon are not sh own while th e receiver is in Quad mod e.
23 Screen Saver Mode Use the Screen Saver mode to conceal the fact that the LCD receiver is actually a surveillance recorder. The system comes pre-loaded with five scenic images that let the LCD receiver simulate a picture frame. When motion is detected by a camera, the LCD receiver will display the triggered camera in single channel full-screen.
24 Motion Detection With the Screen Saver activated, motion detect ion is enabled on the system. When motion is detected by one of the cameras, the LCD receiver will display the triggered camera in single- channel full-screen, and the motion alarm will beep, but the system will not record.
Setting the Time 25 C C a a m m 1 1 R R E E C C 160602-2.AVI 2009 07 17 16:32:05 Setting the Time It is highly recommended to set the time on the system prior to recording. You need to set the correct date and time in order to use Schedu le Recording.
Recording 26 Rec or ding Three recording modes are available on the system: Manual Recording, Schedule Recording, and Motion Recording. NOTE : An SD card must be inserted in th e wireless re ceiver in order t o record. You sh ould alw ays format the SD card prior to initial recording.
Recording 27 Manual Recording Manual Recording allows you to manually start/stop recording from one channel at a time . You cannot record while in Quad mode. You can also record while in Zoom mode. For details on using Zoom, see “Zoom” on page 52.
Recording 28 Schedule Recording Use Schedule Recording to have the system automatically record continuously from a selected camera or from Auto Sequence Viewing Mode according to a start and stop time. You must set a Recording Schedule in the main menu in order to use Schedule Recording.
Recording 29 Figure 7.2 Schedule Recording on the receiver – “AUTO REC” must not appear in order for Schedule Record to function To enable schedule recording: 1.
Recording 30 Motion Recording Use Motion Recording to have the system only record when motion is detected by one of the cameras. The camera that appears on-screen is the only camera that is recording. To enable Motion Recording: 1. Press the Motion button.
Recording 31 The “REC” indicator will only appear when motion is detected by one of the cameras on-screen. By default, the system is set to record for 15 seconds after the triggered motion event. For details on adjusting the motion recording time, see “Trigger Record” on page 41.
Viewing Recorded Video 32 Viewing Rec or ded Video With video recorded on the SD card, you can op en the File menu to playback the video files. You can playback recorded video on the system (whe n connected to a TV or monitor) or directly from the SD card – simply connect the SD card to your computer.
Viewing Recorded Video 33 4. Select a folder and press the Enter button . Folders are labeled by date (yymmdd): e.g. 080512 . Select [. .] and press the Enter button to go up a level. 5. Select a file from the list and press the Enter button . The selected file loads and playback begins.
Viewing Recorded Video 34 Controlling Playback Once the file begins playing, use the buttons on the remote control or wireless receiver to control playback. To control playback: : Play/Pause playback; restart video from the beginning : Fast forward playback 2X, 4X, 8X, 16X, 32X, and 64X.
Viewing Recorded Video 35 Viewing Video Directly From the SD Card You can view the saved video files on your computer (PC or Mac) by using an SD card reader (not included). Saved video files are in AVI format. NOTE : Some PCs and Macs may h ave an SD card reade r built-in.
Using the Intercom 36 Using the Inter com Use the Intercom feature for two-way communicati on between the LCD receiver and the camera. Talk the person at the camera from behind closed doors for added security. NOTE : Please make sure th e camera(s) i s proper ly connected prior to using the Intercom.
Using the Main Menu 37 Using the Main Menu Use the Main Menu to configure camera and receiver settings. To open the Main Menu: • Press the MENU button on the wireless receiver or the remote control NOTE : Make sure the display i s in single channel full- screen view p rior to opening th e Main Menu 1.
Using the Main Menu 38 Camera On/Off Use the Camera On/Off menu to show/hide camera channels on the main display screen. For example, if you disable camera 3, it will not ap pear in single channel full-screen, or in Quad mode. NOTE : If a po wer failure occurs on your system, you may n eed to re-c onfigure y our Camera On/Off settings.
Using the Main Menu 39 Record Use the Record menu to change image quality, mo tion recording time, se t a recording schedule, and enable/disable overwrite.
Using the Main Menu 40 Quality To change the image quality: 1. From the Main Menu, select Record and press the Enter button . 2. From the record menu, select Quality and press the Enter button . 3. Press LEFT/RIGHT to select 320x480 (QVGA) or 640x480 (VGA).
Using the Main Menu 41 Trigger Record Use the Trigger Record menu to set the length of the time for the system to record after motion is detected by a camera. To change the motion recording time: 1. From the Main Menu select Record and press the Enter button .
Using the Main Menu 42 Schedule Record Use the Schedule Record menu to set start and stop times for Schedule Recording. During this time block, the system will record continuously from one specific camera, or from any cameras in Auto Sequence Viewing Mode.
Using the Main Menu 43 Overwrite Use the overwrite feature to have the system overwrite the oldest recorded data on the SD card once the SD card is full. To enable overwrite: 1. From the Main Menu select Record and press the Enter button . 2. From the record Menu select Overwrite and press the Enter button .
Using the Main Menu 44 Pairing Use the Pairing menu to pair additional cameras (u p to 4) to the system. By default, the camera included with your system is automatically paired to channel 1 on the wireless receiver. The camera and receiver will communicate with one another once they are powered on.
Using the Main Menu 45 To pair an additional camera: 1. Connect the camera to a power outlet. DO NOT permanently mount the camera. 2. Press MENU on the wireless receiver or remote control. 3. From the Main Menu, select Pairing and press the Enter button .
Using the Main Menu 46 Settings Use the Settings menu to set the system time, change display options, and format the SD card. The Settings menu contains the following sub-menus: • Date & Time : .
Using the Main Menu 47 Date & Time Use the Date & Time menu to set the time and date on the system. You must set the date and time in order to use Schedule Recording. For details, see “Schedule Recording” on page 28. To set the date and time: 1.
Using the Main Menu 48 Brightness Use the Brightness menu to adjust the brightness level of the LCD screen. To adjust brightness: 1. From the Main Menu, select Setting and press the Enter button . 2. From the Settings menu, select Brightness and press the Enter button .
Using the Main Menu 49 AV Out Use the AV out menu to select the TV system for the wireless receiver. To select the TV system: 1. From the Main Menu, select Setting and press the Enter button . 2. From the Settings menu, select AV out and press the Enter button .
Using the Main Menu 50 Screen Saver Use the Screen Saver menu to select an image for Screen Saver mode. To configure the Screen Saver: 1. From the Main Menu, select Setting and press the Enter button . 2. From the Settings menu, select Screen Saver and press the Enter button .
Using the Main Menu 51 Alarm Volume Use the Alarm Volume menu to increase / decrease the volume of the buzzer when motion is detected by the camera(s). The Alarm Volume also affects the volume of the “beep” that is heard when you press a button on the remote control.
Using the Main Menu 52 Zoom Use the zoom menu to enable 1X and 2X digital zoom on the cameras. While zoomed in, you can scan the image and view channels in full-screen. NOTE : Zoom is intended as a temporary setting t hat is applied to ALL CHANNE LS. When you ar e finished usin g zoom, y ou should return t he view to 1X view.
Using the Main Menu 53 Format Use the Format menu to format the SD card. It is highly recommended to format the SD card prior to initial recording. To format the SD card: 1. Insert the SD card into the SD card slot on th e right panel of the wireless receiver until you hear a “click.
Using the Main Menu 54 Default Use the Default menu to restore the system to factory settings. To restore factory settings: 1. From the Main Menu, select Setting and press the Enter button . 2. From the Settings menu, select Default and press the Enter button .
Appendix A: System Specifications 55 Appendix A: System Specifications General Description Specification Transmission Frequenc y ISM 2,400~2,483.5 MHz Transmission Power 14dBm Unobstructed Effective R.
Appendix B: About Digital Wireless Technology 56 Appendix B: About Digital Wir el ess T echnol ogy The Digital Wireless signal transmission type us ed by the Lorex LW2702 series is also known as FHSS –Frequency Hopping Spread Spectrum .
Appendix C: Adding Cameras 57 Figure 15.0 Pair ing menu Appendix C: Adding Cameras The system comes with cameras that have already been paired to the LCD receiver . The Pairing Function assigns each camera to a differ ent channel on the wireless receiver (up to four cameras), and is necessary for configuring a dditional cameras.
Appendix D: Strengthenin g the Range of t he Wireless Signal 58 Appendix D: Str engthening the Range of the Wir el ess Signal Is your wireless signal choppy? Do you want to extend the range of wireless transmission? There are several ways to boost your wireless signal as well as options to help you extend the range of the wireless signal.
Appendix D: Strengthenin g the Range of t he Wireless Signal 59 2.4 GHZ Directional Wireless Panel Antenna Use the 2.4GHz Directional Wireless Panel Antenna (model #: ACCANTD9 ) to focus a wireless signal onto one specific camera in order to increase range of transmission (clear line-of-sight between the camera and the antenna is required).
Appendix E: Deleting Video Files on the System 60 Appendix E: Del eting Video Fil es on the System You can delete video files on the SD card directly on the system. Deleting files if you need to clear space on the SD card (if Overwrite is disabl ed), or for your own file management purposes.
Appendix F: Estimated Reco rding Times on SD Cards 61 Appendix F: Estimated Rec or ding Times on SD Car ds Use the table below to help you estimate the re cording times on various sizes of SD cards. Times shown are in hours, minutes, and seconds. NOTE : The sy stem is comp atible with SD High Capacity (SDHC) cards, minimum Class 2.
Appendix G: Power Failure 62 Appendix G: Po wer F ailur e A power failure may interrupt recording modes on the system. After power is restored, the following w ill occur: • The system will restart i.
Troubleshooting 63 T r oubl eshooting If you have problems with your System, there is often a quick and simple solution. Please try the following: Problem Solution There is no pi cture from a Camera.
FAQ 64 FA Q Q: What is the maximu m distance I can ha ve between the camera and the receiver? A: Typically 450 feet (137 m) with a clear line of sight in open space, or approximately 150 feet (46 m) in a house. Walls, studs, furniture will in terfere with the range of wireless transmission.
LOREX PRODUCT LIMITED WARRANT Y Lorex warrants, to the original retail purch aser only (the “Purchaser”), th at this item (the “Product”) if properly used and installed, and where applicable, .
Lorex no hace ni nguna de cad a declar ación ni garantía de ni nguna clas e con respect o al pot encial, capacid ad o eficacia del Producto para evitar, minimizar o en alguna forma afectar a los daños o lesiones personales o a la propiedad.
.
Enhanc e your security with genuine Lor ex Camer as, Digital Video Rec or ders, Integrat ed Systems and Ac cessories. Or der whate ver y ou need at www .
Een belangrijk punt na aankoop van elk apparaat LOREX Technology LW2702 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen LOREX Technology LW2702 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens LOREX Technology LW2702 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding LOREX Technology LW2702 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over LOREX Technology LW2702 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van LOREX Technology LW2702 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de LOREX Technology LW2702 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met LOREX Technology LW2702 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
