Gebruiksaanwijzing /service van het product 10775001 van de fabrikant Lowrance electronic
Ga naar pagina of 166
ENGLISH HDS Gen3 Operat or Manual lowr ance .com.
.
Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected in this version of the manual. Please contact your nearest distributor if you require any further assistance.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. SD TM and microSD TM are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
About this manual The manual assumes that the user has basic knowledge of navigation, nautical terminology and practices. Important text that requires special attention from the reader is emphasized as follows: Ú Note: Used to draw the reader’s attention to a comment or some important information.
Viewing the manual on the screen The pdf viewer included in the HDS Gen3 makes it possible to read the manuals and other pdf files on the screen. Manuals can be downloaded from lowrance.com. The manuals can be read from an inserted microSD card or copied to the unit’s internal memory.
Zoom In/Out Select the relevant panel button. Touch operation: Use pinch or spread gestures. Key operation: Use the + and - keys. Exit the pdf viewer Touch operation: Select the X in the upper right corner of the panel. Key operation: Press the X key.
8 Preface | HDS Gen3 Operator Manual.
Contents 15 Introduction 15 Operating the system 16 The front panel and keys 18 The Home page 19 Application pages 21 Integration of 3 rd party devices 23 Basic operation 23 Systems Controls dialog 23.
39 Chart overlay 39 Insight specific chart options 40 Insight view options 41 Navionics specific chart options 42 Navionics chart settings 43 Navionics view options 46 Jeppesen tides and currents 47 C.
79 Stop sonar 80 Advanced StructureScan settings 81 SpotlightScan 81 The SpotlightScan image 82 SpotlightScan setup 83 SpotlightScan options 85 SpotlightScan operation tips 86 StructureMap 86 The Stru.
106 Radar 106 The Radar panel 107 Radar overlay 107 Radar operational modes 107 Radar Range 107 Using the cursor on a radar panel 108 Adjusting the radar image 109 Advanced radar options 110 Radar vie.
135 Sirius weather display 137 Sirius view options 137 Weather icons 138 Marine zones 138 Tropical statements 139 Adjusting color codes 139 Animating Sirius weather graphics 139 Weather alarms 140 Too.
14 Contents | HDS Gen3 Operator Manual.
Introduction Operating the system You can use both the keys and the touchscreen to operate the HDS Gen3. This manual uses the following general terminology to describe operating the unit.
The front panel and keys Key Description 1 Touchscreen 2 Pages key Press once to activate the Home page. Repeat short presses to cycle the favorite buttons. Press and hold from an active page to go to the last used page. 3 Cursor keys Press arrows to move through menu items, to adjust a value, and to move the cursor on a panel.
Key Description 7 Menu key A single press displays the menu for the active panel/ overlay. Press and hold to hide or show the menu. A quick double-press displays the settings menu. 8 Panel key Used on multiple-panel pages. A short press switches between the panels, a long press expands active panel to a full page panel and back again.
The Home page The Home page is accessed from any operation by a short press on the Pages key. Key Description 1 Tools Select a button to access dialogs used for carrying out a task, or for browsing stored information. 2 Local time and Water depth 3 Applications Select a button to display the application as a full page panel.
Key Description 5 Favorites Select a button to display the panel combination. Press and hold a favorite button to enter edit mode for the Favorites panel. Application pages Each application connected to the system is presented on panels. The application can be presented as a full page, or in combination with other panels in a multiple panel page.
Split pages You can have up to 4 panels on each page. 2 panels page 3 panels page 4 panels page Panel sizes in a split page can be adjusted from the System Controls dialog. Quick split pages Each full screen application has several pre-configured quick split pages, featuring the selected application combined with each of the other panels.
Integration of 3 rd party devices A device connected to the NMEA 2000 network should automatically be identified by the system. If not, enable the feature from the advanced option in the System settings dialog. The 3 rd party device is operated by using menus and dialogs as on other panels.
You switch between a panel’s dashboards by selecting the left and right arrow symbols or by selecting the dashboard from the menu. Editing a CZone dashboard You can customize a CZone dashboard by changing the data for each of the gauges.
Basic operation Systems Controls dialog The Systems Controls dialog provides quick access to basic system settings. You display the dialog by making a short press on the Power key.
Standby mode In Standby mode, the Sonar and the backlight for screen and keys are turned off to save power. The system continues to run in the background. You select Standby mode from the System Controls dialog. Switch from Standby mode to normal operation by a short press on the Power key.
Using menus and dialogs Menus The menu is used to operate the system and to adjust settings. • Activate a menu item and toggle on/off an option by selecting it • Adjust a slide bar value by either.
Selecting pages and panels Selecting a page • Select a full page panel by selecting the relevant application button on the Home page • Select a favorite page by selecting the relevant favorite but.
Without removing your finger from the screen, drag the selection circle over the desired item to display item information. When you remove your finger from the screen the cursor reverts to normal cursor operation.
Creating a Man Overboard waypoint If an emergency situation should occur, you can save a Man Overboard (MOB) waypoint at the vessel’s current position by pressing the Zoom In ( + ) and Zoom out ( - ) keys simultaneously.
The MOB waypoint menu option When a MOB waypoint is activated, you can use the Waypoint MOB menu option to: • Move it on the panel • Edit its attributes • Delete it • Goto it When you select the Edit menu option the Edit Waypoint dialog opens.
Customizing your system Customizing the Home page wallpaper The Home page's wallpaper can be customized. You can select one of the pictures included with the system, or you can use your own picture in .jpg or .png format. The images can be available on any location that can be seen in the files browser.
4. Confirm your changes by tapping one of the panels, selecting the save option in the menu, or by pressing the Enter key. The changes are saved to the active favorite or split page. Data Overlay You can have data information as overlay on a page. The information can be any data available on the network.
Adding new favorite pages 1. Select the New icon in the favorite panel on the Home page to open the page editor dialog 2. Drag and drop page icons to set up a new page 3.
Charts The chart function displays your vessel’s position relative to land and other chart objects. On the chart panel you can plan and navigate routes, place waypoints and display AIS targets. You can overlay a radar image, a StructureScan image or weather information.
Key Description 8 Chart range scale 9 Range rings interval (only displayed when Range rings are turned on) * Optional chart items Ú Note: You turn the optional images on/off individually. For more information, see "Chart settings" on page 47.
Selecting chart type Chart type is set individually for each chart panel. Activate one of the chart panels, and then select one of the available chart types in the chart source menu option. Repeat the process for the second chart panel, and select an alternative chart type for this panel.
Positioning the vessel on the chart panel Chart orientation Several options are available for how the chart is rotated in the panel. The chart orientation symbol in the panel’s upper right corner indicates the north direction. North up Heading up Course up North up Displays the chart with north upward.
Using the cursor on the chart panel By default, the cursor is not shown on the chart panel. When you activate the cursor, the cursor position window is displayed.
Ú Note: You must have a SIRIUS data package subscription to search for fueling stations and an AIS receiver connected to search for vessels. 3D charts The 3D option provides a three dimensional graphical view of land and sea contours.
Zooming a 3D chart You zoom in and out on a 3D chart by using the zoom (+ or -) buttons, or by using the + and - keys. Chart overlay Radar, Structure, and Weather information can be displayed as overlay on your chart panel. Ú Note: Weather overlay is currently only available in the United States.
Insight view options Insight Chart details Low Basic level of information that cannot be removed, and includes information that is required in all geographic areas.
Navionics specific chart options Orientation , Look ahead , 3D and Change to Navionics / Change to Insight (previously described in this section) are common for all chart types.
Navionics chart settings Colored seabed areas Used for displaying different depth areas in different shades of blue. Presentation type Provides marine charting information such as symbols, colors of the navigation chart and wording for either International or U.
Navionics view options Chart shading Shading adds terrain information to the chart. Navionics dynamic tide and current icons Shows tides and currents with a gauge and an arrow instead of the diamond icons used for static tides and current information.
Ú Note: All numeric values are shown in the relevant system units (unit of measurement) set by user. Easy View Magnifying feature that increases the size of chart items and text. Ú Note: There is no indication on the chart showing that this feature is active.
Navionics Fish N' Chip The system supports Navionics Fish N' Chip (U.S. only) chart feature. For more information, see www.navionics.com. Depth highlight range Select a range of depths between which Navionics fills with a different color. This allows you to highlight a specific range of depths for fishing purposes.
Jeppesen tides and currents The system can display Jeppesen tides and currents. With this information it is possible to predict the time, level, direction and strength of currents and tides. This is an important tool when considering planning and navigation of a trip.
Chart settings Settings and display options made in the Chart settings page are common for all chart panels. 3D boat selection Determines which icon to use on 3D charts.
Vessels’ extension lines Sets the lengths of the heading and course extension lines for your vessel. For setting extension line lengths on other vessels shown as AIS targets, refer to AIS "Course extension lines" on page 125.
Waypoints, Routes, and Trails Waypoints, Routes, and Trails dialogs The Waypoints, Routes, and Trails dialogs give access to advanced edit functions and settings for these items. The dialogs are accessed from the Tools panel on the Home page or from the chart Settings dialog.
A waypoint is used to mark a position you later may want to return to. Two or more waypoints can also be combined to create a route. Saving waypoints You can save a waypoint at a selected location by positioning the cursor on the panel, then selecting the new waypoint option in the menu.
Edit a waypoint You can edit all information about a waypoint from the Edit Waypoint dialog. The dialog can also be accessed from the Waypoints tool on the Home page. Waypoint alarm settings You can set an alarm radius for each individual waypoint you create.
Edit a route from the chart panel 1. Select the route to make it active. 2. Select the route edit option in the menu. 3. Position the new routepoint on the chart panel: - If you set the new routepoint on a leg, a new point is added between existing routepoints.
Converting Trails to Routes You can convert a trail to a route from the Edit Trail dialog. The dialog is activated by activating the trail, then selecting the trail's pop-up, or the Trail menu option. The Edit Trails dialog can also be accessed by selecting the Trails tool on the Home page.
1. Position at least two routepoints on a new route, or open an existing route for editing. 2. Select Autorouting , followed by: - Entire Route if you want the system to add new routepoints between the first and the last routepoint of the open route.
• Selection option used for autorouting part of a route. Two routepoints selected Result after automatic routing The Edit Route dialog You can add and remove routepoints from the Edit Route dialog. This dialog is activated by selecting an active route's pop-up or from the menu.
Trails Trails are a graphical presentation of the historical path of the vessel, allowing you to retrace where you have travelled. Trails can be converted to routes from the Edit dialog. From the factory, the system is set to automatically track and draw the vessel's movement on the chart panel.
Waypoints, Routes, and Trails | HDS Gen3 Operator Manual 57.
Navigating The navigation function included in the system allows you to navigate to the cursor position, to a waypoint or along a predefined route. If autopilot functionality is included in your system, the autopilot can be set to automatically navigate the vessel.
Key Description 5 Bearing line with allowed off course limit When travelling on a route the bearing line shows the intended course from one waypoint towards the next.
When route navigation is started, the menu expands and shows options for canceling the navigation, for skipping a waypoint, and for restarting the route from current vessel position. Starting a route from the chart panel Activate a route on the panel, and then select the route navigation option from the menu.
Navigating with the autopilot When you start navigation on a system with autopilot functionality, you are prompted to set the autopilot to navigation mode. If you choose not to engage the autopilot, the autopilot can be set to navigation mode from the Autopilot Controller later on.
Trails Opens the Trails dialog where trails settings can be adjusted and trails can be converted into routes for navigation. Refer to "Converting Trails to Routes" on page 53.
Sonar The Sonar function provides a view of the water and bottom beneath your vessel, allowing you to detect fish and examine the structure of the sea floor.
Ú Note: You turn the optional Sonar images on/off individually. Refer to "Sonar Settings" on page 73. Zooming the Sonar image You can zoom the Sonar image by: • using the zoom (+ or -) buttons • pinching or spreading on the screen • using the + / - keys Zoom level is shown on the bottom left side of the panel.
If the scroll bar is on the far right side, it indicates that you are viewing the latest soundings. If you position the cursor to the left side of the screen, the history bar starts scrolling towards the left, and the automatic scrolling as new soundings are received is turned off.
Preset range levels Allows for the selection of a specific depth range that is not tied to the depth of the water. Custom range This option allows you to manually set both upper and lower range limits. Ú Note: Setting a custom range puts the sonar in manual mode.
Adjusting Sensitivity and Colorline Select the Sensitivity or Colorline menu options in the Sonar menu and adjust them by dragging the bar vertically or by using the Cursor keys. Ú Note: Minor adjustments can be made by tapping above or below the slider bar or pressing the Cursor keys.
adjusting the image to a faster speed when vertically fishing without moving. Ping speed Ping speed controls the rate the transducer transmits the Sonar signal into the water. By default, the ping speed is set to max. It may be necessary to adjust the ping speed to limit interference or to adjust for specific fishing conditions.
When the Sonar image is being recorded, there is a flashing red symbol in the top left corner and a message will appear periodically at the bottom of the screen. The recording is stopped by selecting the Log Sonar function and then selecting Stop . The following options are available: Filename Specify the name of the recording (log).
Sonar view options Select the View in the Sonar menu to see View options. Split screen options Zoom Key Description 1 Zoom level 2 Zoom bars The Zoom mode presents a magnified view of the sounder image on the left side of the panel. By default the zoom level is set to 2x.
Bottom lock The bottom lock mode is useful when you want to view echoes close to the bottom. In this mode the left side of the panel shows an image where the bottom is flattened. The range scale is changed to measure from the seabed (0) and upwards. The bottom and the zero line are always shown on the left image, independent of the range scale.
Amplitude scope The Amplitude scope is a display of real-time echoes as they appear on the panel. The strength of the actual echo is indicated by both width and color intensity. Preview You can have all available sonar history shown at the top of the sonar screen.
Sonar settings Sonar source If you have more than one Sonar on your network, you can select which one to be the active source. Network Sonar You can share the Sonar images from this HDS Gen3 unit with other HDS units connected on the Ethernet network.
Ú Note: Selecting the proper fishing mode is critical to optimal sonar performance. If you completed configuration setup at initial startup, the proper fishing mode has already been selected.
Installation Used for Sonar installation and setup. See the separate HDS Gen3 Installation manual. Sonar | HDS Gen3 Operator Manual 75.
StructureScan StructureScan HD uses high frequencies to provide a high resolution, picture-like image of the seabed. Ú Note: You must have a StructureScan HD transducer installed to use StructureScan features.
Key Description 1 Depth 2 Temperature 3 Bottom 4 Frequency 5 Zoom (downscan) / Range (sidescan) icons 6 Range scale Zooming the StructureScan image You can zoom a StructureScan image by: • using the zoom (+ or -) buttons • pinching or spreading on the screen • using the + / - keys Zoom level is shown on the upper left side of the panel.
To remove the cursor and the cursor elements from the panel, press the X key or select the Clear cursor option. Viewing StructureScan history When the cursor is active in a DownScan view, the history bar is shown at the top of the panel.
Range The range setting determines the water depth that is visible on the screen. Auto range When the range is set to Auto the system automatically sets the range depending on the water depth. Preset range levels You can select between several preset range levels.
Advanced StructureScan settings Surface clarity Wave action, boat wakes and temperature inversions can cause on- screen clutter near the surface. The surface clarity option reduces surface clutter by decreasing the sensitivity of the receiver near the surface.
SpotlightScan To use the SpotlightScan feature, the SpotlightScan transducer must be mounted on your trolling motor and its trolling motor position sensor mounted on the trolling motor foot pedal.
Key Description 1 Water column 2 Bottom 3 Twin scanning beams SpotlightScan setup Configuring the heading sensor to the trolling motor You must configure the heading sensor with the trolling motor foot pedal. 1. Select Network from the Settings dialog 2.
Aligning the SpotlightScan image You must align the SpotlightScan image with the direction the trolling motor is pointing. If the image is not correctly aligned with the trolling motor, the orientation of the image does not match the underwater environment around your boat.
surface clutter by decreasing the sensitivity of the receiver near the surface. Noise rejection Signal interference from bilge pumps, engine vibration and air bubbles can clutter the sonar screen. The noise rejection option filters the signal interference and reduces on-screen clutter.
SpotlightScan operation tips • Remove slack in the trolling motor cable to prevent image distortion. • Rotate the trolling motor at a slow, constant speed to achieve the best results. • Reducing the range increases the size of the water column, providing the best view of fish activity beneath the boat.
StructureMap The StructureMap feature overlays SideScan images from a StructureScan source on the map. This makes it easier to visualize the underwater environment in relation to your position, and aids in interpreting SideScan images.
2. Select Structure source - Live data is default Ú Note: Structure overlay can also be activated by selecting a saved StructureMap file in the files browser.
overlap and clutter the chart. If several logs of the same area are required, the maps should be put on separate microSD cards. StructureMap tips • To get a picture of taller structures (a wreck, etc.) — do not drive over it, instead, steer the boat so the structure is on the left or right side of your boat.
You can create standard or high resolution files. High resolution .smf files capture more detail, but take longer to convert and are larger than standard resolution files. To save disc space it is recommended to remove the StructureScan (*.sl2) files after conversion.
Structure options You adjust the StructureMap settings from the Structure options menu. The menu is available when Structure overlay is enabled. Not all options are available when saved StructureMap files are used as the source. Unavailable options are greyed.
Info panels The Info panels consist of multiple gauges - analog, digital, and bar - that can be customized to display selected data. The panel displays data on dashboards, and you can define up to ten dashboards within the panel. Dashboards A set of dashboard styles are predefined to display vessel, navigation, and angler information.
Edit a dashboard Activate the dashboard you want to edit, then: 1. Activate the menu. 2. Select the edit option. 3. Select the gauge you want to change. Selected gauge is indicated with a blue background. 4. Select information to be displayed, configure limits, and eventually change the source for the information.
Video The video function allows you to view videos or camera sources on your system. Ú Note: The video images are not shared from the Ethernet network. You can only view the video on the unit connected to the video source. The Video panel A video panel can be set up as a single panel, or as one of the panels on a multiple panel page.
Simulator The simulation feature lets you see how the unit works in a stationary position and without being connected to the Sonar, Radar, GPS, etc. Use the simulator to become familiar with your unit before using it on the water.
Simulator source files You can select which data files are used by the simulator. A set of source files is included in your system, and you can import files by using a microSD card inserted into the card reader. You can also use your own recorded files in the simulator.
Set start position Moves your vessel to the current cursor position. Ú Note: This option is only available when the GPS source is set to Simulated course.
Autopilot If a MotorGuide Xi5 trolling motor with Pinpoint GPS is connected to the network, then the SmartSteer (autopilot) functionality is available on your HDS Gen3.
Autopilot interface Key Description 1 Autopilot information bar 2 Autopilot Controller The Autopilot Controller The autopilot is controlled from the Autopilot Controller , activated from the System Controls dialog displayed by pressing the Power key. You can select the position of the Autopilot Controller on the page.
The Autopilot information bar The Autopilot information bar is displayed when an autopilot mode is selected. The bar includes information about the autopilot mode and navigational information. The bar is present on all pages if the autopilot is in an active mode.
Heading Lock mode Locks and maintains the current vessel heading. Use the left and right arrow buttons in the Autopilot Controller to make heading adjustments. To make small heading adjustments, single-select the left or right buttons. For larger adjustments, select and hold the left or right buttons.
C-turn Steers the vessel in a C-shaped pattern. Spiral turn Steers the vessel in a spiral with a decreasing or increasing radius. Spiral decreasing radius Spiral increasing radius Zigzag turns Steers the vessel in a zigzag pattern.
Square turn Makes the vessel automatically turn 90° after having travelled a defined leg distance. Lazy S-turn Makes the vessel yaw around the main heading. Recording and converting a trail to a route The Record trail button is used to record and convert a trail or part of a trail to a route.
When you start navigating from an application (chart, steering, radar, and so on) you are prompted to engage the autopilot in Nav. mode. You can also initiate Nav. mode from the Autopilot Controller after navigation is started. When you reach the destination, the autopilot switches to your Arrival mode setting.
Autopilot settings Chart compass You can select to show a compass symbol around your boat on the chart panel. The compass symbol is off when the cursor is active on the panel. Autopilot control location Controls the location of the Autopilot controller on the panel.
Arrival mode Description Standby Cancels autopilot activity and returns the vessel to handheld remote or foot pedal control. Heading lock Locks and maintains the last vessel heading. Anchor Anchors the vessel at the current destination. Ú Note: We recommend only using heading lock in open water.
Radar The radar panel can be set up as a full screen view or combined with other panels. The radar image can also be displayed as an overlay on a chart panel. For more information, see "Chart overlay" on page 39. Ú Note: Radar overlay requires data from the heading sensor.
* Optional radar symbology. Radar symbology can be turned ON/OFF collectively from the Radar menu, or individually as described in Radar settings panel. Radar overlay You can overlay the Radar image on the Chart. This can help you to easily interpret the radar image by correlating the radar targets with charted objects.
Adjusting the radar image You may be able to improve the radar image by adjusting the radar sensitivity, and by filtering out the random echoes from sea and weather conditions. You can also adjust the image settings from the radar menu. Gain The gain controls the sensitivity of the radar receiver.
Advanced radar options Radar threshold The threshold sets required signal strength for the lowest radar signals. Radar returns below this limit are filtered and are not displayed. Default value: 30%. Target expansion Target expansion overrides and increases the default radar pulse length, providing larger target returns.
Radar view options Radar symbology Radar symbology defined in the Radar Settings panel can be turned on/off collectively. See the radar panel illustration showing optional radar items. Target trails You can set how long the trails generated from each target on your radar panel remain.
This option works only when the system is navigating an active route. If you are not navigating an active route, the heading up orientation is used until the navigation function is started.
EBL/VRM markers The electronic bearing line (EBL) and variable range marker (VRM) allows quick measurements of range and bearing to vessels and landmasses within radar range. Two different EBL/VRMs can be placed on the radar image. The EBL/VRMs are by default positioned from the center of the vessel.
2. Activate the menu 3. Select one of the EBL/VRM markers - The EBL line and the VRM circle are positioned according to the cursor position. Offsetting an EBL/VRM marker 1. Ensure that the cursor is not active 2. Activate the menu, select EBL/VRM , then select the marker you wish to offset 3.
Sensitivity The guard zone sensitivity can be adjusted to eliminate alarms for small targets. MARPA targets If the system includes a heading sensor, the MARPA function (Mini Automatic Radar Plotting Aid) can be used to track up to ten radar targets. You can set alarms to notify you if a target gets too close.
Tracking MARPA targets 1. Position the cursor on the target on the radar image 2. Select Acquire targets from the menu 3. Repeat the process if you want to track more targets After your targets are identified, it may take up to 10 radar sweeps to acquire and then track the target.
Alarm ID Description MARPA unavailable Controls whether an alarm is activated if you do not have the required inputs for MARPA to work (valid GPS position and heading sensor connected to the radar server) You can also set up a guard zone around your vessel and when a target comes with in this zone, an alarm can be triggered.
Radar symbology You can select which optional radar items that should be turned on/off collectively from the menu. Refer to the Radar panel illustration. Bearings Used for selecting whether the radar bearing should be measured in relation to True/Magnetic North (°T/°M) or to your relative heading (°R).
AIS If an NAIS400, an AI50 or an NMEA 2000 VHF that can do AIS (Automatic Identification System) is connected to the network, then any targets detected by these devices can be displayed and tracked. You can also see messages and position for DSC transmitting devices within range.
Symbol Description Lost AIS target. When no signals have been received within a time limit, a target is defined as lost. The target symbol represents the last valid position of the target before the reception of data was lost. Selected AIS target, activated by selecting a target symbol.
AIS information on radar panels The radar data bar includes information on up to 3 AIS targets. The targets are listed with the closest target on top, and are color coded to indicate target status.
AIS SART When an AIS SART (Search and Rescue beacon) is activated, it starts transmitting its position and identification data. This data is received by your AIS device. If your AIS receiver is not compliant with AIS SART, it interprets the received AIS SART data as a signal from a standard AIS transmitter.
MMSI number of the SART. For example, MOB AIS SART - 12345678. 3. Activate the MOB function - The display switches to a zoomed chart panel, centered on the AIS SART position - The system creates an active route to the AIS SART position When data is received from an AIS SART, an alarm message is displayed.
Vessel alarms You can define several alarms to alert you if a target shows up within predefined range limits, or if a previously identified target is lost. Alarm ID Description Dangerous vessel Controls whether an alarm will be activated when a vessel comes within the predefined CPA or TCPA.
Vessel settings Your vessel’s MMSI number You need to have your own MMSI (Maritime Mobile Service Identity) number entered in the system to receive addressed messages from AIS and DSC vessels. It is also important to have the MMSI number entered to avoid seeing your own vessel as an AIS target on the chart.
Icon filters By default, all targets are shown on the panel if an AIS device is connected to the system. You can select not to show any targets, or to filter the icons based on security settings, distance, and vessel speed. Course extension lines You can set the length of the Course Over Ground (COG) extension lines for other AIS vessels.
Audio If a SonicHub server or a FUSION marine entertainment system is connected to the NMEA 2000 network, you can use the HDS Gen3 to control and customize the audio system on your vessel. When connected to a WM-3 Satellite module with an active subscription, you can include SiriusXM products on your system.
server. If only one of the devices is present, it is the selected Audio server by default. The Media bar When audio is enabled, the Media bar appears at the bottom of the screen on all pages. The information in the Media bar varies depending on the active audio source.
Key Description 6 Volume level Setting up the audio system Selecting audio source You can switch between available audio sources from the menu. Ú Note: The Mic source selects a high voltage level input allowing you to broadcast loud hailer messages over the audio system.
Audio controls Use the menu to control the playback. The menu options vary depending on the active audio device. Device explorer You can use the device menu or Device explorer menu options to access the source’s native menu or file structure, which can be used to select tracks.
Audio options Use the Options menu option to repeat or shuffle tracks or albums, and to open the Mixer. The options vary depending on the active audio device. Audio mixer Use the Mixer to: • Adjust the balance, volume, and volume limits individually for each zone.
Lowrance weather module is connected to SAT IN. Other auxiliary audio sources only have volume control. Detaching Sirius from the AUX source If a Sirius radio is connected to the FUSION radio/server, the AUX source is automatically attached to the Sirius feed.
Radio favorites When a channel is tuned in, you can add the station to the favorite’s list. All favorite channels can be viewed, selected, and deleted from the Favorites dialog. Sirius radio (North America only) Channels list The channels list displays all available Sirius channels, whether or not you have a subscription for the channel.
DVD video You can view DVD video from a FUSION-Link device on units with a Video Adapter cable (000-11010-001), sold separately. Controlling DVD video 1. Insert a DVD into the device. 2. Open the Home page and select the Video page. 3. Activate the Audio panel and select DVD as the source on the menu.
SiriusXM™ weather When connected to a Navico Weather module, you can subscribe and include Sirius™ audio and Sirius™ Marine Weather Service on your system (North America only). Sirius™ audio and weather service covers inland U.S. waters and coastal areas into the Atlantic and Pacific oceans, Gulf of Mexico and the Caribbean Sea.
Sirius weather display Sirius weather can be displayed as an overlay on your chart panel. When weather overlay is selected, the chart menu increases to show the available weather options.
Wind speed is indicated by a combination of small and large barbs at the end of the wind tail. Zero knots / Indeterminate wind direction Small barb = 5 knots Large barb = 10 knots Arrow barb = 50 knots If a combination of 5 and 10 knot barbs are shown on a tail, then add them together to give you the total wind speed.
Sirius view options Precipitation Shades of color are used to show precipitation type and intensity. The darkest color indicates the highest intensity.
Icon Description Surface observation Tropical storm tracking; past (grey) - present (red) - future (yellow) Hurricane (category 1-5) tracking; past (grey) - present (red) - future (yellow) Tropical di.
Adjusting color codes You can define the sea surface temperature range and wave height color coding. The temperature above warm and below cool values is displayed as progressively darker red and darker blue. Waves higher than the maximum value are indicated with progressively darker red.
Tools By default, the Tools panel includes icons used for accessing options and tools that are not specific to any panel. When external equipment is integrated to the HDS Gen3, new icons might be added to the Tools panel. These icons are used for accessing the external equipment's features.
Language Controls the language used on this unit for panels, menus, and dialogs. Changing the language causes the unit to restart. Text size Used for setting the text size in menus and dialogs. Default setting: Normal Key beeps Controls the loudness of the beep sound when a key is pressed.
Warning: If waypoints, routes, and trails are selected, they are permanently deleted. Advanced Shows a panel with more advanced settings. Used for setting how your system displays various user interface information. In addition, controls which features are shown in the interface.
Alarms Provides the option to enable the siren. It also provides a dialog where you specify turning on alarms for items, and includes active alarm information and alarm history.
Sun/Moon Displays sunrise, sunset, moonrise and moonset for a position based on entered date and the position’s latitude/longitude. Trip calculator Trip 1 / Trip 2 Displays voyage and engine information, with reset option for all data fields. Today Displays voyage and engine information for current date.
Alarms Alarm system The system continuously checks for dangerous situations and system faults while the system is running. When an alarm situation occurs, an alarm message pops up on the screen. If you have enabled the siren, the alarm message is followed by an audible alarm, and the switch for external alarm becomes active.
Multiple alarms If more than one alarm is activated simultaneously, then the alarm message displays a list of up to 3 alarms. The alarms are listed in the order they occur with the alarm activated first at the top. The remaining alarms are available in the Alarms dialog.
Alarms dialog All alarms are setup in the Alarms Settings dialog. The alarm dialogs can also be activated from the Tools panel. The alarm dialogs include information about active alarms and alarm history.
148 Alarms | HDS Gen3 Operator Manual.
Maintenance Preventive maintenance The HDS Gen3 does not contain any field serviceable components, therefore the operator is required to perform only a very limited amount of preventative maintenance. Checking the connectors The connectors should be checked by visual inspection only.
Exporting the log file The log file can be exported from the files browser. When you select the Log database you are prompted to select a destination folder and filename. Once accepted, the log file is written to the chosen location. Software upgrades The latest software for the HDS Gen3 is available for download from our website, lowrance.
User Data File version 5 This is used to import and export waypoints and routes with a standardized universally unique identifier (UUID), which is very reliable and easy to use. The data includes such information as the time and date when a route was created, and so on.
Export region The export region option allows you to select the area from where you want to export data. 1. Drag the boundary box to define the desired region 2.
Purging Waypoints, Routes and Trails Deleted Waypoints, Routes and Trails are stored in the HDS Gen3 memory until the data is purged. This is necessary to allow user data to be synchronized across multiple units on an Ethernet network. If you have numerous deleted, unpurged Waypoints, purging may improve the performance of your system.
Touchscreen operation Basic touchscreen operation on the different panels is shown in the table below. The panel sections later in this manual have more information about panel specific touchscreen operation.
Icon Description Pinch to zoom out on the chart or on an image. Spread to zoom in on the chart or on an image. Touchscreen operation | HDS Gen3 Operator Manual 155.
156 Touchscreen operation | HDS Gen3 Operator Manual.
Index A About this unit 142 Active panel 26 Adjusting panel size 30 Advanced settings SpotlightScan 83 Advanced system settings 142 AIS 118 Calling a vessel 120 Course extension lines 125 DSC 120 Icon.
Turn off automatic navigation 97 Turn pattern steering 100 U-turn 100 Zigzag turns 101 Autorouting 53 Entire route 54 Example 54 Selection 54, 55 Auxiliary, audio sources 130 B Backing up your system .
Coordinate system 141 Copying files to microSD card 144 Cursor 26 Cursor assist 26 Customizing your system 30 CZone 21 D Dangerous vessels 125 Dashboards 91 Data Overlay 31 Datum 141 Demo mode 94 Dept.
M Magnetic variation 141 Maintenance Touchscreen Calibration 149 Man Overboard Cancel navigation to MOB 28 Creating a MOB 28 Display information 28 Manual mode Sonar 68 Manual About 5 Version 5 Manuals, viewing 6 Measuring distance 27 Media bar 127 Mercury VesselView 21 microSD card Copying files to 144 MMSI number 124 N Nav.
R Radar 106 Alarm settings 113, 115 Course up 110 EBL/VRM markers 112 EBL/VRM Placing 112 EBL/VRM Gain 108 Guard zone 113 Heading up 110 Interference 109 MARPA Target symbols 114 Targets 114 Tracking .
Overlay on chart panel 135 Precipitation 137 Sea Surface Temperature (SST) 137 Status panel 134 Tropical statements 138 Wave indication 137 Weather icons 137 SL2 format 69 SLG format 69 Software upgra.
Tips 88 StructureScan 76 Advanced settings 80 Auto range 79 Contrast 79 Convert data to StructureMap format 88 Flipping the image 80 Frequencies 79 Image 76 Noise rejection 80 Preset range levels 79 P.
Units of measure, setting 143 V Vessel alarms 123 Vessel settings 124 Video 93 Adjusting the image 93 Setting up the panel 93 Source 93 Standard 93 Video Video panel 93 View sonar log 74 View Spotligh.
.
*988-10740-001* 0980.
Een belangrijk punt na aankoop van elk apparaat Lowrance electronic 10775001 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Lowrance electronic 10775001 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Lowrance electronic 10775001 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Lowrance electronic 10775001 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Lowrance electronic 10775001 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Lowrance electronic 10775001 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Lowrance electronic 10775001 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Lowrance electronic 10775001 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.