Gebruiksaanwijzing /service van het product X9 van de fabrikant Magnadyne
Ga naar pagina of 20
Owner’ s Manual Model: X9 For T echnical Assistance, please call (800) 638-3600, or vi si t w ww.magnadyne.com.
Congratulations on your purchase of a quality Marksman automotive security and remote start system. Marksman security products have been designed to provide the consumer with a technologically superior product and years of trouble free operation.
3 2-Way LCD Remote LCD Display Icons 1-Way Remote The LCD screen on the 2-way remote control displays graphic icons. It provides visual information on any trigger of the sensors and around the clock surveillance of your vehicle, as well as displaying the present status of the system.
4 T ransmitter Button System Function Remark Lock Doors & Arms System Car Locator Upon Armed Arm and Delete the 2-Stage Shock Sensor Press T wice within 3 Seconds Silent Arming/Disarming Ignition .
Vibration/Melody Mode This mode is useful when you are in a noisy place and it is difficult to hear the beep from the transmitter . While in the Vibration/Melody Mode, the transmitter will vibrate if your security system has been activated. 1. Press and hold the and buttons at the same time until one long beep is heard.
Press Buttons at the Same Time: Then Press Button Within: System Function 5 Sec. Switching to 2nd Vehicle or Returning to 1st Vehicle Operation 5 Sec. Melody / Vibration Mode 5 Sec. Power Save Mode LCD Screen Lamp T urns On for Five Seconds 3 Sec. System Status Check 3 Sec.
7 Flash Function 1 Flash System is Armed 2 Flashes System is Disarmed 3 Flashes Disarmed / T riggered 3 or 6 Flashes Car Locator Constant On or Flashing Under Remote Start Chirp Function 1 Chirp Syste.
8 1. Press the button on the transmitter . 2. The siren will chirp once and parking lights will flash once indicating that the system is now armed. The vehicle door will lock upon arming when interfaced with the security system. Ajar Warni ng: If the siren sounds 3 chirps, then you have left a door , trunk, or hood lid ajar .
9 Automatic Arming Bypass While the system is in Disarmed Mode, press the button twice. The horn/siren will respond with one chirp and the LED will turn “ON”. The security system will remain in this mode for as long as you wish. T o exit this mode press the or buttons and the system will return to normal status.
10 Manual valet mode allows you to bypass all alarm functions eliminating the need to hand your transmitter to parking attendants or garage mechanics. This mode is also a necessity if your transmitters become in-operable. When the system is in Valet Mode, all alarm functions and remote start functions are off.
The transmitter can be used as a remote panic switch to manually trigger the alarm system in case of an emergency . 1. Press and hold the button for 3 seconds to enter the Panic Mode (horn/siren will start to sound and parking lights will flash).
12 Driver Paging / Lost and Found is useful the event that someone wants to page the driver of the parked vehicle, or someone cannot find the LCD transmitter . With the ignition switch in the “OFF” position, press and hold the valet switch for 2 seconds to page the driver .
13 If the Out-of-Range Indication feature is activated the system will automatically check the range every 30 minutes after armed. 1. If the user is within the range, the icon will display on the LCD screen. 2. If user is out of range, the icon will disappear from the LCD screen and the transmitter will beeps 5 times.
14 This feature allows the vehicle to remain running after the key has been removed from the ignition. It is useful on occasions when you wish to exit and lock the vehicle for a short period of time, but keep the engine running allowing the climate controls to stay on.
15 When the engine is running by remote start and you wish to shut it off, follow these steps: 1 . While in Remote Start Mode, press the button twice on the remote transmitter . 2 . Move the optional remote start toggle switch to the “OFF” position (if installed).
16 If any of the following conditions exist while the system is operating, the engine will not start or will shut down immediately: 1. The hood is opened. 2. The brake pedal is pressed. 3. The hand brake is released (for Standard T ransmission vehicles only).
Return to First Car Operation (LCD Remote Only) 1. Press and hold and buttons at the same time until one long beep is heard. Programming Mode has now been entered. Note: No action for five seconds will generate two long beeps indicating the Programming Mode has been exited.
18 1-Way Remote for the X9 Security System X7 RF 59.95 ea. SAVE 4 4 2-Way LCD Remote for the X9 Security System X4RF-LCD 139.95 ea. TRANSMITTERS DESCRIPTION MODEL # $ PRICE REPLACEMENT BATTERIES 1.5 Volt AAA Alkaline Battery commonly found in grocery stores, hardware stores, etc.
Credit Card or Money Order Only (Sorry No Cash, C.O.D. or personal checks accepted) SHIP TO: (No P .O. Boxes) LAST NAME FIRST NAME INITIAL STREET ADDRESS ADDITIONAL ADDRESS ADDITIONAL ADDRESS CITY ST ATE ZIP CODE DA Y TIME PHONE NUMBER PAR T # DESCRIPTION QTY .
X9-UM 07-23-08 Rev. A © Copyright 2008/ 2009 Magnadyne Corporation Limited Lifetime Warranty Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purch.
Een belangrijk punt na aankoop van elk apparaat Magnadyne X9 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Magnadyne X9 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Magnadyne X9 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Magnadyne X9 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Magnadyne X9 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Magnadyne X9 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Magnadyne X9 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Magnadyne X9 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
