Gebruiksaanwijzing /service van het product 903DW van de fabrikant Makita
Ga naar pagina of 16
n Overall length No load speed IRPM) Collet size 3 mm or 1 /E'' 19,000 295 mm I1 1 518'') MODEL 903D MODEL 903DW With Fast Charger Net weight 0 7 kg 11.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
1. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (SOOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0 Always switch off the tool before insertion or removal of the battery cartridge. 0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
Installing or removing wheel point CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the wheel point. Remove the guide from the tool when it is installed on the tool. Loosen the wing bolt and pull the guide off the front end of the tool.
Switch action CAUTION : Before inserting the battery cartridge into the tool, always check to see that the switch lever actuates properly and returns to the “OFF” position when released. Operation Switch on the tool and wait until the wheel point attains full speed.
Chain blade sharpening attachment 1. Read the instruction manual of yo:' chain saw to determine the size of wheel point, the top plate filing angle (30" or 35 ) and the depth gauge clearance [0.025" (0.64 mm), 0.030" (0.76 mm), 0.035" (0.
This will allow approx. 1/5 of the wheel point diameter to protrude above the chain cutters as chain manufacturers re- commend. NOTE : Always check the protrusion of the wheel point using the gauge after tightening the wing bolt securely because the guide may move when you tighten the wing bolt secure- ly.
5. The depth gauges (or "rakers") of the chain cutter should be checked every third or fourth chain sharpening and lowered if found to be too high. To do this, place the guide on the gauge as shown in the figure and turn the guide until the wheel point fits into the ap- propriate depth gauge slot in the gauge.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
May-09-89 EN I CORDLESS BLADE SHARPENER @- Model 903D Note: The switch and other part configurations may differ from country to country. 14.
MODEL 903D May-09-89 EN 11 21 31 41 51 61 71 ‘:“OM DESCRIPTION Name Plate Housing Set lWath Item 11 1 Battery Holder Switch Compression Spring 6 Switch Lever Collet Nut 3 ‘EM DESCRIPTION 8 1 Col.
MAKmA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
Een belangrijk punt na aankoop van elk apparaat Makita 903DW (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Makita 903DW heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Makita 903DW vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Makita 903DW leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Makita 903DW krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Makita 903DW bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Makita 903DW kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Makita 903DW . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
