Gebruiksaanwijzing /service van het product SR7500 van de fabrikant Marantz
Ga naar pagina of 58
Model SR7500/SR8500 User Guide AV Surround Receiver.
ENGLISH WARRANTY For warranty information, contact your local Marantz distributor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz.
CE MARKING English The SR7500/SR8500 is in conformity with the EMC directive and lo w-voltage directiv e. Fran ç ais Le SR7500/SR8500 est conforme à la directiv e EMC et à la directive sur les basses tensions. Deutsch Das Modell SR7500/SR8500 entspricht den EMC-Richtlinien und den Richtlinien f ü r Niederspannungsger ä te.
Espa ñ ol ADVERTENCIAS - No exponga el equipo a la lluvia ni a la humedad. - No extraiga la tapa del equipo. - No introduzca nada en el interior del equipo a trav é s de los orificios de ventilaci ó n. - No maneje el cable de alimentaci ó n con las manos mojadas.
1 ENGLISH TABLE OF CONTENTS FOREWORD This section must be read before any connection is made to the mains supply. This user guide covers the SR7500 and SR8500, though the SR7500 is given for the title. Explanations of features belonging only to the SR8500 are indicated as “SR8500 only”.
2 ENGLISH THX need not be activated for music, movies made especially for TV, or shows such as sports programming, talk shows, etc. This is because they were originally mixed for a small room environment. THX is a trademark or registered trademark of THX Ltd.
3 ENGLISH DTS 96/24 offers the following: 1. Sound quality transparent to the original 96/24 master. 2 . Full backward compatibility with all existing decoders. (Existing decoders will output a 48 kHz signal) 3 . No new player required: DTS 96/24 can be carried on DVD-video, or in the video zone of DVD-audio, accessible to all DVD players.
4 ENGLISH ACCESSORIES Remote Controller RC8500SR 2 3 1 5 6 4 8 0 9 7 MEMO CLEAR DSS AMP AUX2 AUX1 TAPE TUNER CD CD-R MD VCR DVD TV SOURCE OFF ON/OFF POWER ON D4 D5 D2 M D1 D3 D5 OK VOL CH PREV MUTE MENU EXIT GUIDE TEST CH.
5 ENGLISH e HEADPHONE jack for stereo headphones This jack may be used to listen to the SR7500 ’ s output through a pair of headphones. Be certain that the headphones have a standard 1/4 ” stereo phono plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.
6 ENGLISH DISP MUL TI AU T O TUNED ST V – OFF NIGHT PEAK ANALOG DIGIT AL AT T SLEEP SURR AU TO DISC 6.1 MT X 6. 1 SPKR AB DIGITAL SURROUND PC M L C R SL S SR LFE ¡6 g s a ¡7 ¡8 ¡5 h k¡ 0 ¡1 ¡.
7 ENGLISH y RS-232C The RS-232C port is to be used in conjunction with an external controller to control the operation of the SR7500 by using an external device.
8 ENGLISH REMOTE CONTROLLER RC8500SR NAMES AND FUNCTIONS z Infrared Transmitter and Learning Sensor This transmitter emits infrared light. Press the buttons while pointing the transmitter towards the infrared receiver window of the SR7500 or other AV equipment.
9 ENGLISH LCD INDICATORS Information about currently selected source and direct code names are displayed on the LCD. A Source Name indicator This displays the name of the selected source, such as DVD, television, or other AV equipment (up to five characters).
10 ENGLISH REMOTE CONTROL RANGE The distance between the transmitter of the remote control and the IR SENSOR of the SR7500 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible.
11 ENGLISH TUNER MODE AMP MODE 2 3 1 5 6 4 8 0 9 7 MEMO CLEAR DSS AMP AUX2 AUX1 TAPE TUNER CD CD-R MD VCR DVD TV SOURCE OFF ON/OFF POWER ON D4 D5 D2 M D1 D3 D5 OK VOL CH PREV MUTE MENU EXIT GUIDE TEST CH.SEL SURR 7.1CH ATT SPK-AB DISP OSD SLEEP 12 LIGHT Learning Remote Controller RC8500SR D1 D5 D4 D2 D3 D5 2 3 1 5 6 4 8 9 7 TEST CH.
12 ENGLISH CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back left and right speakers, and a subwoofer.
13 ENGLISH Caution: • Be sure to use speakers with the specified impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.
14 ENGLISH LR AUDIO OUT DIGITAL OUT VIDEO OUT S-VIDEO OUT S-VIDEO IN DVI-D IN LR AUDIO OUT AUDIO IN LR VIDEO OUT IN S-VIDEO OUT IN COMPONENT VIDEO OUT COMPONENT VIDEO IN DVI-D OUT L R L R L R L R L R .
15 ENGLISH AC IN MULTI OUT TV DVD C IN OUT S-VIDEO DVD DSS/VCR2 C RS-232C MULTI RC IN OUT DSS/VCR2 IN OUT OUT VCR1 VCR1 L SBR SBL OUT PRE SL L SR R DSS/VCR2 DVD TV R IN RS W RC-5 IN SR AUDIO 7.1CH IN OUT IN LS L SBR SBL CD IN OUT SW OUT CDR/MD TAPE OUT IN IN OUT VIDEO MONITOR OUT MULTI VCR1 TV OUT (AUX2) MONITOR DIGITAL IN DIGITAL OUT 4 1 OPT.
16 ENGLISH CONNECTING THE ANTENNA TERMINALS FM ANTENNA FM EXTERNAL ANTENNA AM LOOP ANTENNA AM EXTERNAL ANTENNA ASSEMBLING THE AM LOOP ANTENNA 1. Release the vinyl tie and take out the connection line. 2. Bend the base part in the reverse direction. 3.
17 ENGLISH L R L R FRONT RC IN R L RC OUT IN VIDEO CONNECTING FOR THE MULTI ROOM RIGHT SPEAKER LEFT SPEAKER IR RECEIVER MULTIROOM RIGHT SPEAKER MULTIROOM LEFT SPEAKER MAIN AMP (For MULTIROOM) MULTIROO.
ENGLISH 18 SETUP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR7500 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and ENTER buttons on the remote control or on the front panel.
19 ENGLISH 1. Select 2. SPEAKER SETUP on the SETUP MAIN MENU, then select MANUAL for 2-1 SPEAKER SETUP. 2. To select the each speaker, press the or cursor buttons.
ENGLISH 20 BASS MIX • The bass mix setting is only valid when “ LARGE ” is set for the front speakers and “ YES ” is set for the subwoofer during stereo playback . This setting has effect only during playback of PCM or analog stereo sources.
21 ENGLISH Measurement During measurement, a test tone is output from the speakers, which is then measured and analyzed though the microphone. The measurement flow and items are as follows.
ENGLISH 22 5 CS II (CIRCLE SURROUND II ) PARAMETER 1. Select “ CS II ” in the SETUP MAIN MENU with the or cursor buttons, and press the ENTER button. 2. To Select desired contents as below, press the or cursor buttons. TRUBASS: Set the TRUBASS level between 0 and 6 level in 1 level interval with the or cursor buttons.
23 ENGLISH 8 DC TRIGGER SETUP This unit has 2 DC trigger control jacks, these are selectable to link with input functions for the main room or multi room. Each trigger can be set up separately. 1. Select “ DC-TRIG SETUP ” in the SETUP MAIN MENU with or cursor button, and press the ENTER button.
ENGLISH 24 The signal cannot be converted from the component to the video or S-video. Notes of OSD menu: • The setup menu can be displayed through all video out (COMPONENT, S-VIDEO, VIDEO). • The setting informations (e.g. volume setting) are displayed through all video out when the VIDEO CONVERT function are set ENABLE.
25 ENGLISH SURROUND MODE The SR7500 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup.
ENGLISH 26 Notes: • CS I I mode is available for 2ch input signals which are encoded in Dolby Digital or PCM format. • PCM-audio signals can be subjected to Pro Logic processing when the sampling frequency is 32 kHz, 44.
27 ENGLISH The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on SR7500 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and input signal.
ENGLISH 28 Notes: • Dolby Digital (2 ch: Lt/Rt): signal with Dolby Surround flag Speakers are full set. • No sound outputs from the surround speaker, center speaker and subwoofer if the DVD disc has no surround data.
29 ENGLISH OTHER FUNCTION TV AUTO ON/OFF FUNCTION This function allows the component connected to the TV-VIDEO in jack to control the power (ON/ OFF) to the SR7500. AUTO POWER ON 1. Be sure the TV auto mode is ENABLED. (Refer to page 22: PREFERENCE) 2.
ENGLISH 30 SPEAKER A/B SR7500 has speaker system - A and speaker system- B for front L/R channels. You can select these systems by pressing SPEAKERS A/B button on the front panel or SPK- AB on the remote. 7.1 CH INPUT The SR7500 is equipped for future expansion through the use of Multi channel SACD multichannel player or DVD-Audio player.
31 ENGLISH To cancel the 7.1 CH. INPUT setting, press the 7.1 CH INPUT button on the front panel or press 7.1 CH on the remote. Notes: • When the 7.1 CH. Input is in use, you may not select a surround mode, as the external decoder determines processing.
ENGLISH 32 (FM) TUNING MODE (AUTO STEREO OR MONO) When in the auto stereo mode, AUTO indicator will be illuminated on the display. The “ ST ” indicator is illuminsted when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the “ TUNED ” and “ ST ” indicators are not illuminated.
33 ENGLISH PRESET SCAN (Using the remote control unit) 1. P ress the TUNER button twice within two seconds on the remote. 2. Press the > button until PAGE2 is displayed and press the P-SCAN (D4) on the remote. “ PRESET SCAN ” appears on the front display and then the preset station with the lowest preset number is recalled first.
ENGLISH 34 Ten keypad Press, press again, press again, etc. 1A → B → C → 1 → A 2D → E → F → 2 → D 3G → H → I → 3 → G 4J → K → L → 4 → J 5M → N → O → 5 → M 6P .
35 ENGLISH NUMBER DISPLAY PROGRAMME TYPE 1 POP Pop Music 2 ROCK Rock Music 3 MOR M. O. R. Music 4 LIGHT Light classical 5 CLASSIC Serious classical 6 NEWS News 7 AFFAIR Current Affairs 8 INFO Informat.
36 ENGLISH MULTI ROOM SYSTEM The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR7500 is located. To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary.
37 ENGLISH ENGLISH REMOTE CONTROLLER OPERATION CONTROLLING MARANTZ COMPONENTS 1. Press the desired function button. • The selected function name and USE are displayed in the LCD. 2. Press the desired operation buttons to play the selected component.
38 ENGLISH CONTROLLING A MARANTZ CD RECORDER (CDR MODE) CONTROLLING A MARANTZ MD DECK (MD MODE) CONTROLLING A MARANTZ TAPE DECK (TAPE MODE) 2 3 1 5 6 4 8 0 9 7 MEMO CLEAR DSS AMP AUX2 AUX1 TAPE TUNER CD CD-R MD VCR DVD TV SOURCE OFF ON/OFF POWER ON D4 D5 D2 M D1 D3 D5 OK VOL CH PREV MUTE MENU EXIT GUIDE TEST CH.
39 ENGLISH ENGLISH BASIC OPERATION USE MODE (Normal operation status) This remote control is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD, CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplifier).
40 ENGLISH LEARN MODE Programming the (PLAY) and Other Control Buttons and Numeric Buttons This remote control is capable of learning and storing codes used by other remote controls that you already own.
41 ENGLISH ENGLISH 3. Press the DVD source button . The NAME indicator blinks. The “ ” blinks to indicate that the letter can be changed. 4. Press the cursor button twice. The D in DVD blinks to indicate that the letter can be changed. 5. Press the 1 numeric button to select A.
42 ENGLISH Erasing All This procedure clears (resets) all programmed codes and names. Once all the data is cleared, the memory is returned to the factory default status. The programmed macros are also erased. 1. Hold down the M button for three seconds or more.
43 ENGLISH ENGLISH 2. Press the D4 (MACRO) direct button. The macro menu is displayed. The MACRO indicator displays and LEARN blinks. 3. Press the D1 (M-01) direct button . The NAME is displayed. 4. Press the D3 (NAME) direct button . The “ ” blinks to indicate that rewriting is possible.
44 ENGLISH SETTING THE MACRO TIMER Setting the macro timer enables the macro program to automatically turn the power for a device on or off or perform other operations. In the settings, you can select to execute the macro timer everyday or only once. Be sure to set the clock to the correct time before using the timer.
45 ENGLISH ENGLISH • If the copying fails in the middle of the copying process, ERROR is displayed on the remote control. Check and perform steps 1 to 7 again. 11. Once copying is completed, press the M button on both remote controls. SETUP SETTING THE LIGHTING TIME • The LCD lights up when the LIGHT buttons are pressed.
46 ENGLISH TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user ’ s guide ? 3. Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table.
47 ENGLISH ENGLISH TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................ 87.5 - 108.0 MHz Usable Sensitivity ............................ IHF 1.8 µ V/16.4 dBf Signal to Noise Ratio ................... Mono/Stereo 75/70 dB Distortion .
i SETUP CODES AMPLIFIER Source button name : AMP Brand name Setup code Amstrad 0105 Arcam 0296 Audiolab 0296 Carver 0296 GE 0105 Genexxa 0422 Grundig 0296 Harman/Kardon 0919 JVC 0358 Left Coast 0919 L.
ii SATELLITE Source button name : DSS Brand name Setup code Nokia 0482, 0750, 0778, 1154, 1250, 1750 OctalTV 1032 Orbitech 1127 Pace 0482, 0874, 1202, 1350 Panasonic 0274, 0728, 0874, 1347 Panda 0482 .
iii TV Source button name : TV Brand name Setup code Chun Yun 0027, 0207, 0036, 0119 Chung Hsin 0207, 0080, 0135 Cimline 0036 Cineral 0478, 0119 Citizen 0087, 0057, 0119 Clarion 0207 Clarivox 0064 Cla.
iv TV Source button name : TV Brand name Setup code Sambers 0543 Sampo 0181, 0120, 0057, 0205, 0198, 0036, 0119, 0677, 1782 Samsung 0181, 0087, 0839, 0729, 0057, 0205, 0036, 0064, 0117, 0119, 0291, 03.
v VCR Source button name : VCR Brand name Setup code Matsui 0375, 0379 Matsushita 0062 Medion 0375 Memorex 0062, 0064, 0075, 0066, 0074, 0267, 0027, 0131, 0334, 0375, 1264 Memphis 0099 Metz 0064, 0374.
vi DIRECT BUTTON FUNCTIONS Source button name : AMP PAGE Command Note PAGE 1 1 AUTO SELECT AUTO SURROUND 2 2 SELECT DOLBY MODE 3 DTS SELECT DTS MODE 4 EX/ES SELECT EX/ES 5 DIRECT SELECT PURE DIRECT PA.
Printed in China is a registered trademark. www.marantz.com You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc.
Een belangrijk punt na aankoop van elk apparaat Marantz SR7500 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Marantz SR7500 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Marantz SR7500 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Marantz SR7500 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Marantz SR7500 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Marantz SR7500 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Marantz SR7500 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Marantz SR7500 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
