Gebruiksaanwijzing /service van het product V-R171X-DLW van de fabrikant Marshall electronic
Ga naar pagina of 33
Marshall Electronics Model No. V-R171X-DLW 17" Full Resolution Dual Link / W aveform Monitor Operating Instr uctions.
2 This page i ntentionall y l eft blank.
3 Contents Features ...................................................................................................................................................... .......... 4 Installation and Initial Setup ....................................
4 Features The DLW (Dual Link / W aveform) Series is the latest addition to Mars hall's expandin g line of IM D-equipped monitors. ■ 1920 x 1200 Full Re solution 17” Panel The V-R171X-DLW features an all-digital T FT-MegaPix el active matrix LCD system with 1920x1200 nat ive res olution.
5 Installation and Initial Setup ■ Unpack ing Carefully unpac k the V-R171X-DLW monitor and v erify that the followin g items are included: • V-R171X-DLW Monit or • V-PS12-5V-1 Power Supp ly with Twist-Lock Connector • Operat ing Instru ctions Inspect t he unit f or any physical dama ge that ma y have occ urred during shipping.
6 Front Panel Features Power Button Turn t he monitor off or on by pressing t he power button. The LED on t he power button is at maximum illumina tion when the unit is OFF. The LED is at m inimum illumina tion when t he unit is on. Input Channel Buttons Pressing SDI 1 or SDI 2 will select HDSDI-SDI Video Inputs 1 or 2, respect ively.
7 Rear Panel Features RS-422/485 Serial Inter face The RS-422/48 5 ports are used t o remotely contr ol the IMD or all V-R171X-DL W features, using a v ariety of industry standard prot ocols. (Note: Connector/pi n-out may n eed to be adapte d depending on protocol and controll ing device used.
8 Compatible Input Formats The followi ng SDI st andards are sup ported by the V- R171-DLW: 525i, 625i 720p (60, 59.94, 50) 720p (30 / 29. 97) 1035i (60 / 5 9.94) 1080i (60 / 5 9.94 / 50) 1080psF (24 / 23.98) 1080p (30 / 29. 97 / 25 / 24 / 23. 98) The followi ng 3G-SDI standards ar e supported b y the V-R171-D LW 1080p (60 / 59.
9 DLW Monitor Layouts The V-R171X-D LW has 4 possible la youts, Multi mode, Vectorscope mode, Wa veform mode a nd Full Scree n Video mode. Each press of the L AYOUT Button will change the c urrent m ode to next a vailable m ode.
10 Wav eform Monitor M ode Full Scree n Video Mode.
11 On-Screen Menu STRUCT URE OVERVIEW.
12 On-Screen Men u (continued) M A IN MENU A ND N A VIG A TION Access and navigate the main menu using the RotoMenu™ knob: Using the RotoMenu kn ob • Press the RotoMenu™ kn ob to enter the main menu. • Rotate t he knob to s croll up or down in the main menu or each submenu.
13 ■ 16:9 Markers Use t his setting to s uperimpose one of 10 mar kers on the screen when in 16:9 or Full Screen mode. T his setting is disabled when the as pect ratio is s et to 4:3, or when Pixel-t o-Pixel mode is enable d. Note that in Full Screen mode, markers a re vertically st retched along w ith the picture to f it the 16:10 screen.
14 ■ Marker Background Use t his setting to c hoose how selected m arkers are displayed on t he screen: • Off The marker is superimpose d on t he complete image. • 50% Gra y Screen area be yond t he marker is s hown at 50% i ntensity. • Black Screen area be yond t he marker is shown as black.
15 ■ Monochrome Mode Use t his setting to enable monochrome mo de. On ly the luminance o f the image will be d isplayed as a grayscale picture. ■ Blue-Only M ode Use t his setting to enable Blue-Onl y mode. T his mode displays onl y th e blue co lor c omponent of the image, switching off the red and green comp onents.
16 • In Full Screen (16:10) mod e, images are scaled t o fill the entire 16:10 screen (1920 x 1200). In this mode, all OSD f eatures are super imposed on t he image. Note that when usi ng a 16:9 i nput image i n this mode, t he image will be verti cally stretched b y approximatel y 10%.
17 • RGB Studio: accommodat es digital 480 i video using the RG B limited r ange (16-235) inputs. • RGB PC: accommodates full range RGB (0-255) input s. • YUV 601: accommodat es for Rec. 6 01 SDTV YUV co lorspace inputs. • YUV 709: accommodat es for Rec.
18 ■ Use r-Definabl e Function Buttons Use t he Function 1 , Fu nction 2 , Function 3 and Functi on 4 menu items t o define each f unction button on the front panel of t he monitor.
19 OSD Config Subm enu Use t he OSD Conf iguration submenu to select a variety of info rmation to be displayed on the screen. ■ IMD State Use t his setting to t urn the IMD text displa y on or of f. This setting affects bot h fixed string I MD text and remote IMD text commands.
20 ■ OSD Ta ll y Use t his setting to c hoose how tally is dis played on t he screen. T he available OSD Tally options depend o n the Tally Source select ed in the I MD Conf iguration submenu W hen .
21 Use t his setting to enable time c ode display on t he screen. T ime code is de-embedded fr om the v ertical ancillary data (VANC) within t he HD /SDI signal. Two types of t ime code can be selected to display on the screen: LTC (linear ti me code) or VITC (vertical interval tim e code) .
22 IMD Config Subm enu ■ Overview The V-R171X-DLW features an In-Monitor Display (IMD) with t he ability to display on-screen t ext and t ally in t hree colors. I MD text, color, and alignment can be ass igned to eac h screen locally using menu options (see belo w).
23 MEI Use t he MEI protocol setting when controlling t he V-R171X-DLW using the Marshall Network C ontroller box . This protocol allows remote c ontrol of all f eatures on the V-R171X-DLW , including mark er setup, video configurat ion, system conf iguration, and image adjustm ents (br ightness, contrast, etc.
24 Press RotoMenu™ knob to e dit the IMD Name. R otate the RotoMenu™ k nob t o move the c ursor. Press t he RotoMenu™ knob with the cu rsor on t he character to be changed, t hen rotate t he knob to scr oll through the character set . P ress the Rot oMenu™ knob to choose a character.
25 On-Screen Men u (continue d) Closed Captioni ng Submenu Use t he Closed Caption ing submenu to select the type of capt ioning stream you would like to dec ode. ■ Mode The DL W monitor series provides support for three t ypes of Closed Captioning Modes: 608, 708 and 708 (608 Comp.
26 Wave/Vector Subme nu Use t he Wave/Vector s ubmenu to c hange the locat ion of the W aveform Monit or and Vect orscope, as well as the data displayed on the W aveform monitor or the Vect orscope on the V-R 171X-DLW monitor.
27 • RGB Parade The R ( shown in Red), G (shown in Green) and B (s hown in Blue) components of the signal are displayed fr om left t o right. • RGB Overlay The RGB c omponents of the signal are overlaid. ■ Waveform Scale Use t he Waveform s cale option to switch between diffe rent graticule units on t he W aveform display.
28 ■ Vect orscope Targets Use t he Vectorsco pe Targets opt ion to set your Vectorsc ope targets up for 75% or 100% color bar signals. You can also set your Vectorsc ope Targets t o the OFF position.
29 SERVICE SUBME NU ■ Software Version Display The Main Board, Keypad, and FPGA software ver sion numbers are displayed. . The fo llowing information is displayed: • rel: Release Packag e version .
30 Specifications ■ P A NEL Screen Size 1 7” Diagonal Display Area (h x v) 367.20 x 229.50 mm Aspect Ratio 16:10 Native (4:3/16:9 Modes) Pixels 1920 x RGB x 1200 Color Depth 8 -bit Viewing Angle (h x v) 140° x 120° Brightness 40 0 cd/m 2 Contrast Ratio 600:1 Dot Pitch (h x v) 0.
31 Specificatio ns (continued) Maintenance ■ Screen Cleaning Periodically clea n the s creen surface using ammonia-f ree cleaning wipes (Mars hall Part No. V-HWP- K ). A clean micro- fiber c loth can also be used using only non-abrasive an d ammonia-f ree cleaning agents.
32 Burn-In Warning This monitor uses a high quality TFT LC D panel. Howeve r, if a stat ic image is left on the screen f or 48 hours, t here may be a 30 second to 10 minute recovery peri od for t he panel. During rec overy, a very faint image may be retained on the display.
33 Marshall Electroni cs , Inc. 1910 East M ap le Ave. El S egundo, CA 90245 Tel: (800) 800-660 8 / (310) 333 -0606 • Fax: 310 -333-0688 www.LC DRacks.
Een belangrijk punt na aankoop van elk apparaat Marshall electronic V-R171X-DLW (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Marshall electronic V-R171X-DLW heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Marshall electronic V-R171X-DLW vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Marshall electronic V-R171X-DLW leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Marshall electronic V-R171X-DLW krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Marshall electronic V-R171X-DLW bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Marshall electronic V-R171X-DLW kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Marshall electronic V-R171X-DLW . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
