Gebruiksaanwijzing /service van het product 61ARMBSFL van de fabrikant Marvel Industries
Ga naar pagina of 20
Installation Operation and Maintenance Instructions R efrigerator Models 30ARM 61ARM 3O ARM 6O ARM 6AD AM MARVEL.
1 T ABLE OF CONTENTS Unpacking your refrigerator ........................ ......... ..2 Removing the packaging...................... ............ ..2 W arranty Registration..................... ................. ....2 Installing your refrigerator ....
UNP A CKING Y OUR REFRIGERA T OR 2 Remove P ackaging Y our refrigerator has been packed for shipment with all parts that could be damaged by movement securely fastened. Cut the banding material at the bottom of the carton, unfold the carton at the bottom and remove the carton from the appliance.
INST ALLING Y OUR REFRIGERA T OR 3 Figure 2 Do not splash or spray water from a hose on the re- • frigerator! Doing so may cause an electrical shock, which may result in severe injury or death. This unit should not, under any circumstances, be • ungrounded.
4 USING Y OUR MicroSentry ™ REFRIGERA T OR CONTROL Figure 3 Control Door Switch During initial startup, or anytime power is interrupted, there will be an approximate 5 minute delay before the refrigerator starts.
5 USING Y OUR MicroSentry ™ REFRIGERA T OR CONTROL Alarm Mute Press any key to mute the audible portion of an alarm,. NO TE- This action will only mute the alarm. If the condition that caused the alarm continues, the alarm code will contin- ue to flash and will sound for 20 seconds every 60 minutes.
DIMENSIONS FOR MODELS 30ARM & 3O ARM 14-7/8” (37.78 cm) 21-3/16” (53.82 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 23-9/32” (59.13 cm) 25-7/32” (64.06 cm) 37-5/32” (94.39 cm) 16-9/16” (42.06 cm) 6 * Depth dimension may vary depending on each individual installation.
DIMENSIONS FOR MODELS 30ARM WITH O VERLA Y DOOR 14-7/8” (37.78 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 37-5/32” (94.39 cm) 23-1/4” (59.06 cm) 22-17/32” (57.23 cm) 21-3/16” (53.82 cm) * Depth dimension may vary depending on each individual installation.
8 R ecommended R ough in Opening Dimensions, Models 6O ARM & 61ARM *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 34-1/2” (87.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max.
R ecommended R ough in Opening Dimensions, Model 61ARM Overlay Door *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 34-1/2” (87.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max.
10 *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 32-1/2” (82.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required.
*24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 32-1/2” (82.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required.
12 FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 1: V erify door alignment The door should be parallel to the sides and top of the refrigerator . If alignment is necessary the door may be adjusted by loosening the 2 screws which secure the hinge adapter brackets to the door and adjusting the door side to side.
FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 6: Drill holes in overlay panel Remove the hinge adapter bushings from the top and bottom door hinge adapters. (See Figure 8).Using the holes in the hinge adapters drill 5/16” (8mm) diameter clearance holes into the overlay panels 3/4” (20mm) deep.
14 FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 9: Secure overlay panel to the door . With the #8 wood screws provided fasten the overlay panel to the door . (See Figure 7). Step 10: Install lock cam (Models with locks only). Attach the lock cam to the back of the lock assembly with the phillips head machine screw provided.
Condenser Air Flow The machine compartment located beneath the cabinet does not require frequent cleaning; however , satisfactory performance depends on adequate ventilation. Be sure nothing obstructs the required air flow openings in front of the cabinet.
16 TROUBLESHOO TING Y OUR REFRIGERA T OR Problem P ossible Cause Remedy Unit not cold enough Adjust temperatures (See “Set the de- sired temperature” on page 13) Control set too warm • Airflow to front grille blocked. • Excessive usage or prolonged door • openings.
P arts or Service Not Supplied or Designated by Marvel The above warranties also do not apply if: The original bill of sale, deliver date, or serial number • cannot be verified. Defective parts are not returned for inspection if so • requested by Marvel.
18 APPENDIX A , ADDITIONAL MicroSentry ™ FEA TURES Information Menu: The following features are available on the Information Menu. • CurrentT emperature • MaximumStoredT emperatur.
All specifications and product designs subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, replacements or compensation for previously purchased products. www .marvelrefrigeration.
Een belangrijk punt na aankoop van elk apparaat Marvel Industries 61ARMBSFL (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Marvel Industries 61ARMBSFL heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Marvel Industries 61ARMBSFL vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Marvel Industries 61ARMBSFL leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Marvel Industries 61ARMBSFL krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Marvel Industries 61ARMBSFL bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Marvel Industries 61ARMBSFL kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Marvel Industries 61ARMBSFL . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
