Handleiding Matsushita CF-19FHGAX Laptop

Samenvatting van de inhoud op de volgende paginas van de handleiding

Pagina 1

ORDER NO. CPD0711208C1 Notebook Computer © 2007 Matsushita Electric Industrial Co., Ltd. All rights rese rved. Unauthorized copying and distribution is a violation of law. CF-19FHGAXxM Model No. This is the Service Manual for the following areas. M …for U.
Pagina 2

This apparatus must be earthed for your safety . T o ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connec- tion to earth.
Pagina 3

LASER SAFETY INFORMATION For U.S.A . Class 1 LASER-Product This product is certified to comply with DHHS Rules 21 CFR Subchapter J. This product complies with European Standard EN60825 (or IEC Publication 825) For all areas This equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation.
Pagina 4

Vorsicht! Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben order einen vom Hersteller empfohlenen ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. LITHIUMB A TTERIES ATTENTION: IL Y A DANGER D'EXPLOSION S' IL Y A REMPLACEMENT INCORRECT DE LA PILE.
Pagina 5

Getting Started Useful Information Troubleshooting Appendix Do Not Use with Any Other Product The battery pack is rechargeable and was intende d for the specified product. If it is used with a product other than the one for which it was de signed, electrolyte leak- age, generation of heat, ignitio n or rupture may result.
Pagina 6

CONTENTS 1. Spe c ifications 1-1 2. Names and Fun c tions of Parts 2-1 3. Block Diagram 3-1 4. Diagno s is P r ocedure 4-1 5. Power-On Self Te s t (Boot Che c k) 5-1 6. List of Error Codes <On l y when the port replicator is connected> 6-1 7. Self Diagnosis Test 7-1 8.
Pagina 7

1. Specifications This page provides the specifi cations for the basic model CF-19FHGAXBM/CF-19FDGAXVM. The model number is different according to the unit confi guration. T o check the model number: Check the bottom of the computer or the box the computer came in at the time of purchase.
Pagina 8

Appendix Main Specifi cations Operating System Microsoft ® Windows ® XP Professional Service Pack 2 with Advanced Security T echnologies (NTFS File System) Microsoft ® Windows ® XP T ablet PC Edit.
Pagina 9

2. Names and Functions of Part s A: Wireless LAN Antenna <Only for model with wireless LAN> Reference Manual “Wireless LAN” B: Bluetooth Antenna <Only for model with Bluetooth> Referen.
Pagina 10

Left side Rear side Bottom A: DC-IN Jack B: USB Port Reference Manual “USB Devices” C: IEEE 1394 Interface Connector Reference Manual “IEEE 1394 Devices” D: Modem Port Reference Manual “Mode.
Pagina 11

3 Block Diagram PR-PS/2 ( KB& Mouse ) Me M e rom UL r o m U L V V Dual core D ua l co re int in t l l e e Super I/O SIO10N268 SMSC EC/KBC (M306KA) Li-Ion Battery Pack Intel® Core 2 ™ Duo mobile processor U7500 (Ultra Low V oltage 1.06GHz) L1 cache: Internal 64K b ytes each core L2 cache: Internal 2M bytes 1.
Pagina 12

4 Diagnosis Procedure 4.1. Basic Procedures 12 / 90.
Pagina 13

4.2. T roubleshooting Please t ake note of the fo llowing tw o points w ith regard to troubles hooting: 1. Know-how o f diagnosis upon occurrence of heavy troubles, e.g. Set cannot be turned ON , Set fails to start , No display on screen , et c. 2. Explanatio n of each tr ouble, mainl y symptom of tr ouble in oper ation.
Pagina 14

5 Power-On Self T est (Boot Check) Outline of POST The set has a boot check function called POST (Power-On Self T est) in it. The condition of the main body is diagnosed by checking beep sound or error code. S tart .............T est begins automatically when power switch is set to ON.
Pagina 15

The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured.
Pagina 16

T roubleshooting 02D0 System cache error - Cache disabled Contact Panasonic T echnical Support. 02F0: CPU ID: CPU socket number for Multi-Processor error . 02F4: EISA CMOS not writable ServerBIOS2 test error: Cannot write to EISA CMOS. 02F5: DMA Test Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.
Pagina 17

7 Self Diagnosis T est As for the self-diagnosis test(PC-Diagnostic utility) to use this model, a standard test and the enhancing test by the module of the main body building in are possible. ● Notes To skip BIOS password Use <Ctrl>+<F10> key to skip BIOS password or authentication of fingerprint.
Pagina 18

-As for the device under the diagnosis, blue and yellow are alternately displayed at the left of the icon. - The diagnosis result of the device greens at the left of the icon when it is normal, and becomes red when abnormal. -When the test of all devices ends, the test result is displayed under the right of the screen.
Pagina 19

Start the standard test Do not test Please begin testing clicking if the selection of the tested device ends. 2-2. "PC-Diagnostic utility" End method When of "Close" on the right of the screen is clicked, the computer reactivates automatically.
Pagina 20

3. T est Item and Division of trouble CPU / SYSTEM Place with possibili- ty of breakdown Stanard T est item Enhan- cing Content of standard test Content of enhancing test CPU / Main board CPU is shift.
Pagina 21

Test Item Standard Enhanced Content of Standard Test Content of Extend Test The place with possibility of breakdown Touch Screen It is confirmed not to find abnormality in the USB connection of Touch Screen. This test cannot find abnormality of Touch Screen.
Pagina 22

8 Wiring Connection Diagram CN1 CN2 INVERTER PCB BACK LIGHT CN901 CN900 CN17 CN5 CN16 CN604 JK601 JK600 CN2 CN600 CN27 CN901 CN18 CN8 KEYBOARD I/F PCB I/O PCB ANT PCB SD PCB MODEM PCB TS PS2 PCB SERIA.
Pagina 23

9 Disassemb ly/Reas sembly Note: Power  off  the  compu ter.  Do  not  shut  down  to  the  Suspend  or  hibernatio n  mode. Do  not  add  peripherals  while  the  computer  is  in  the  Suspend  or  hib ernation  mode;  abno rmal  ope ration  ma y  result.
Pagina 24

4. Lif t  the  far  si de  of  the  Keyboa rd  an d  slide  it  to  backw ard,  and  then  turn  the  Keyboard  ove r  frontward. 5. Remove  the  3  Screws  <N1>. 6. Remove  the  KBD  Connec tor  Cove r .
Pagina 25

9.1.6. Removing  the  DU  Lid  Uni t 1. Remove  the  7  Screws  <K14-9>. 2. Remove  the  DU  Lid  Angle  an d  DU  Lid . Screws  <K14-9>  :  DXQ T2+D 25FN L 9.1.7. Removing  the  HSDP A  PCB  and  Bluetooth  PCB 1.
Pagina 26

9.1.9. R emoving  the  Main  PCB,  Wirel ess  Module,  SD  PCB,  Antenna  PCB  and  Modem  PCB Note: This  proc edure  is  not  neces sary  if  the  comput er  is  not  equipped  with  Wireless  M odule  or  Modem  PCB.
Pagina 27

14. Rem ove  the  2  Sc rews  <N19 >,  and  remove  the  DIMM  Holder . 15. Rem ove  the  T ape. 16. Di sco nnect  the  3  Cables  from  the  3  Connectors.
Pagina 28

9.1.13. R emoving  Pad  PCB  and  SW  PCB 1. Di sconne ct  the  2  Cables  fro m  the  2  Conne ctors  (CN805,CN807). 2. Remove  the  4  Screws  <N1>. 3. Remove  the  Pad  PCB. 4. Remove  the  Operation  Sheet  and  the  SW  PCB.
Pagina 29

9.1.15. Remov ing  the  LCD  Rear  Case 1. Remove  the  8  Screws  <N 7>  on  the  front  side  of  Display  unit. 2. Remove  the  8  Screws  <N 7>  on  the  ba ck  sid e  of  Display  unit.
Pagina 30

9.1.19. R emoving  the  Ea ch  Cover 1. Remove  the  14  Screws  <N6>. 2. Remove  the  Modem/ LAN  LI D  Rubber ,  LAN  LID  Rubber ,  USB LID  Ru.
Pagina 31

9.2. Reassembl y  Instructions 9.2.1. At tenti on  when  CF-19  se ries  is  re p aired ï Pleas e  exec ute  writing  BIOS  ID  wh en  you  ex change  the  Ma in  Board . ïP a r t s  (Shee t  and  rubber)  et c.
Pagina 32

■  Assembly  of  LCD  Back  Damper  (Application  M odel  :  Digitizer  Model) ■  Assembly  of  Inverter  PCB PCB 0  0.5mm 0  0.5mm 0  0.5mm 0  0.5mm 0  0.
Pagina 33

■  Assembl y  of  Inverter  PCB  (Applica ble  Model  :  To u c h  Scree n  Model ) Inverter  Ass'y  Inverter  Ass'y 0  4mm 0  0.5mm A 0  3mm Connector PWB FPC 12 Confirm  the  direction  of  the  Inverter  board  when  attaching.
Pagina 34

■  Assembly  of  Inverter  PCB  (Ap plication  M odel  :  Digit izer  Model) Inverter  Ass'y LCD  Back  Dumper Conductive  Tape 0  1mm Attach  coming  over  the  end  of  steel  plate  by  1  to  2  mm.
Pagina 35

■  Assembl y  of  To u c h  Screen  (Applica ble  Model  :  To u c h  Scree n  Model) Avoid  running  over . Attach  the  surface  to  the  LCD  Front. Apply  the  load  20  to  30N  (2.
Pagina 36

■  Assembly  of  Glass  (Applicable  Model  :  Digitize r  Model) 9.2.3. A ssembling  the  WW AN  Main  Ante nna  PCB,  LAN-Main  BT  Antenna  PCB,  LAN  AUX  Antenna  PCB,  WW AN  AUX  Antenna  PCB  and  Pen  holder 1.
Pagina 37

■  Line  Proces sin g  of  Antenna  Cable 9.2.4. Set ting  up  the  LCD  Hinge 1. Wind  the  Ca ble  coming  out  of  the  LCD  Un it  count erclock- wise  to  the  LCD  Hi nge.
Pagina 38

■  Assembly  of  LCD  Hinge If  you  arrange  the  Cable  in  the  area,  you  do  not  need  to  use  the  fixing  jig.
Pagina 39

■  Line  Proces sin g  of  Antenna  Cable  and  LCD  Cable In s e rt  the  cables  int o  t he  Cable  Holder  as  s hown  in  f igure.
Pagina 40

9.2.5. A ssembling  the  Antenna  Cover ,  th e  Ta b l e t  Latch  Cover  and  the  LCD  Rear  Case 1. Fix  the  LC D  Rear  Case  using  th e  10  Screws  <N15>  and  the  2  Screws.
Pagina 41

■  Assembl y  of  LCD  Rear  Ca se  (Appli cable  Model  :  T ouch  Screen  Model) ■  Assembl y  of  LCD  Rear  Ca se  (Appli cable  Model  :  Digitizer  Model ) 0  1mm 0  0.
Pagina 42

■  Assembly  of  Ta b l e t  Latch  C over  and  Antenna  Cover 10  Places 16  Places Do  not  forget  fixing  with  screws.
Pagina 43

9.2.6. Set ting  the  Display  Uni t 1. Fix  the  Display  Unit  using  the  2  Screws  <N9>. 2. Close  the  Display  Unit  an d  tu rn  the  computer  over ,  then  fix  the  Display  Unit  using  the  4  Scr ews  <N18>.
Pagina 44

■  Assembly  of  Display  Unit LCD  UNIT A  Note Avoid  any  stress  on  the  Cable. Safety  Working  Details  of  "A" Screw Screw Scr.
Pagina 45

9.2.7. Set ting  the  Pad  PCB  and  SW  PCB 1. Attach  both  the  SW  PCB  and  the  Operation  Sheet  to  the  Cabinet .  2. Connec t  the  3  Ca bles  to  the  3  Connectors .
Pagina 46

■  Assembly  of  the  Pad  PCB  and  SW  PCB ■  Putting  of  the  TP  Bottom  Ta p e 9.2.8. S e tting  the  lef t  LED  PCB  and  right  LED  PCB  1. Connec t  the  Cable  to  the  Connec tor .
Pagina 47

■  Assembl y  of  the  le ft  LED  PCB  and  right  LED  PCB 9.2.9. Set ting  the  Power  SW  PCB 1. Connec t  the  Cable  to  the  Co nnector .  (CN9) 2. Fix  the  Powe r  SW  PCB  using  the  Screw .
Pagina 48

9.2.10. S etting  the  I/O  PCB  Ass'y 1. Fix  the  I/ O  PCB  using  th e  2  Screws.  <N9> 2. Fix  the  I/ O  PCB  using  th e  4  Screws.  <N2> Screws<N2>  :  D FHE5058Z B Screws<N9>  :  DRSB2+5 FKL 9.
Pagina 49

4. Fix  the  M odem  PCB  us ing  the  2  Sc rews  <N19>.  5. Fix  the  Wi reless  Module  using  the  2  Sc rews  <N19>.  6. Fix  the  DIMM  Holder  usi ng  the  2  Screws  <N19>.
Pagina 50

14. Fix  the  DU  PC B  and  the  Plate  using  the  2  screws  <N 3>.  15. Fix  the  DU  PCB  Ass'y  an d  Antenna  PCB  using  the  3 screw s  <N9>  and  th e  2  screw s  <N3>  .
Pagina 51

■  Assembl y  of  Main  PCB Process  in  the  order  of  1  2  3  4. S2 Do  not  cover  the  screw Turn  over Do  not.
Pagina 52

52 / 90.
Pagina 53

■  Assembl y  of  Main  Unit DU  PCB  ASSY Main  PCB  Ass'y Insert  it  before  setting  the  Main  Board. Audio  FPC  Ass'y Apply  the  lubricant  (sub  material)  on  the  HDD  Connector  for  about  1  second.
Pagina 54

SD  PCB  Ass'y DIMM  HOLDER  Ass'y Ensure  that  the  knob  is  fit  to  SW  when  setting. Insert  the  FPC Insert  the  hook A Detail  of  portion  A  (assemble  the  LAN/MODEM  HOLDER) LAN/MODEM  HOLDER Put  the  claw  under  the MAIN  PCB.
Pagina 55

9.2.12. Se tting  the  Audio  PC B 1. Connec t  the  Cable  to  the  Co nnector .  (CN901) 2. Fix  the  Aud io  PCB  usin g  the  3  Screws.  <N9> Note: Ti g h t e n  the  Screws  in  th e  numbered  order  (No1  to  No3).
Pagina 56

9.2.13. S etting  the  HSDP A  PCB  and  Bluetoot h  PCB 1. Fix  the  Plate  and  Blueto oth  PCB  usin g  the  2  Screws  <N19>.  2. Connec t  the  Cable  to  the  Connec tor .  (CN1) 3.
Pagina 57

■  Line  Proces sin g  of  Antenna  Cable  of  Main  Unit Cable  Process  1/3 Place  brown/blue/gray  cables  at  left  and white/black  cables  downward. After  connecting  the  white  antenna  cable, connect  it  into  the  Holder  as  illustrated.
Pagina 58

Cable  Holder  Cushion Cable Step  14 Step  12 Step  13 Cable  Process  3/3 Connect  the  brown  antenna  cable. Connect  the  additional  cable  (black). Insert  it  into  the  boss. (Push  it  downward  from  the  top  of  boss.
Pagina 59

9.2.14. A ssembli ng  the  DU  Lid  Unit 1. Fix  the  DU  Lid  Angle  and  the  DU  Lid  using  th e  7  Screws.  <K14-9> Screws  <K14-9>  :  DXQ T2+D 25FN L 9.2.15. Se tting  the  Rear  Cabinet 1.
Pagina 60

■  Cautions  for  Setting  the  Rear  Cabinet 9.2.16. S etting  the  DIMM  Lid  Ass' y 1. Fix  the  DIMM  Lid  Ass'y  using  the  4  Screws.
Pagina 61

9.2.17. Se tting  the  T ouch  Pad  and  Keyboard 1. Connec t  the  Cable  to  the  Connector  ( C N800),  and  att ach  the  To u c h  Pad  to  the  comp uter . 2. Set  the  Cl ick  Button  Pl ate.
Pagina 62

■  Putting  of  the  Sheet ■  Cautions  for  Setting  the  Keyboard LCD  Cushion  Sheet LCD  Cushion  Sheet KB  CNT  Hole  Cushion Gasket  E KBD .
Pagina 63

■  Putting  of  the  Palm  Rest  ASSY ■  Putting  of  the  KBD  Ta p e Windows  Logo  Label Intel  Label Energy  Star  Label Palmrest  Assy 6 .
Pagina 64

9.2.18. S etting  the  Batte ry  Pack  and  the  HDD  Pack 1. Set  the  HDD  in  the  HDD  Case  and  fi x  it  usin g  the  2  Screws.  <N13> 2. Open  th e  HDD  Cover  an d  set  th e  HDD  Pack.
Pagina 65

■  Assembl y  of  the  HDD  ASSY Heater  Ass'y Heater  Assy Note  for  the  Heater  top  end  location Two-sided  Tape Come  the  bottom  over  by  0  to  0.
Pagina 66

9.2. 19. Ass embli ng  the  Ea ch  Cover 1. Fix  the  Battery  LID  Ass 'y ,  the  HDD  LID  Ass'y ,  and  the  PCMCIA  LID  Ass'y  us ing  the  6  Screws.  <K12-16 > 2.
Pagina 67

CF-19FHGAXxM 10 Exploded View E24 K1 10 K82 N1 K39 K1 15 K1 14 K 111 K1 16 E32 K34 N1 N1 K83 K1 10 N9 N9 N9 K31 K30 K9 K80 K80-8 K80-4 K80-12 K80-5 K80-6 K80-1 K80-1 1 K80-10 K80-9 E23 K80-8 K80-2 K80.
Pagina 68

CF-19FHGAXxM K12-14-1 1 B A K12-14-9 A K12-14-9 A K12-14-10 K12-16 K12-16 K12-16 K12-16 K12-3-4 K12-14-4 N1 K90 K12-14-1 1 K12-14-1 K12-14-5 K12-14-3 K12-14-1 K12-14-7 K1 12 K12-6 K12-14 K12-3 K12-14-.
Pagina 69

CF-19FHGAXxM N9 N2 K99 K141  K38 E3 N9 N4 K22 E31 K43 K42 K35 E14 K48 K98 K88 K91 K87 N19 K86 E35 K137 N9 N9 N1 N19 N19 E27 E29 E30 N19 E26 K43 K132 N1 E20 K96 N9 N9 K92 K126 N1 N1 N1 N1 N1 N1 N1 N.
Pagina 70

CF-19FHGAXxM K14-8 K14-7 K14-7 K14-8 N10 K16 K16 K16 K14 K16 N10 N10 N10 N10 K25 K26 K28 K85 K32 K32 N6 N10 N6 N6 K27 K18 K21 K23 N10 K55 K14-1-2 K14-1 K14-1-1 K14-8 K14-8 N6 N6 K1 N10 K14-5 K14-3 K14-9 K14-9 K14-9 K14-4 K14-6 K14-2 N6 K20 K17 K54 K84 K24 K19 K28 K54 A A A A A A A A A A A A A A A A A Screw  tightening  torque 0.
Pagina 71

CF-19FHGAXxM E36 K61 K62 K61 K10-1-13 K10-1-1 1 K10-1-9 K10-3 K10-2 N1 K10-1-7 K10-  1-3 K10-1-3 K10-1-5 K10  -1-5 K10-1-6 K10-1-7 K10-1-4 K10-1-4 K10-1-6 N1 K29 K6 K79 K58 K58 K67 N17 N17.
Pagina 72

CF-19FHGAXxM E19 E21 E36-7 E36-7 E36-6 E36-6 E36-4 E36-8 E36-8 E36 E36-1-1 E36-1-2 E36-1 E36-16 E36-1 1 E36-10 E36-1 1 E36-12 E36-5 K73 K72 E22 K65 K78 K77 K76 K74 E36-2 E36-3 E36-3 K167 K54 K71 E36-1-3 K66 E36-13 E36-14 E36-13 E36-14 E36-15 A A Screw  tightening  torque 0.
Pagina 73

CF-19FHGAXxM K68 K69 N7 N7 N7 K1 1-9 K1 1-10 K1 1-1-2 K1 1-1-2 K1 1-1-4 K1 1-1-4 K1 1-1-5 K1 1-1-5 K1 1-1-6 K1 1-1-3 K1 1-1-3 K1 1-1-1 K1 1-1-1 K1 1-1 K1 1 N7 N7 N7 K68 N7 N7 N7 N15 N15 N15 N16 N15 N1.
Pagina 74

Replacement Parts List CF-19FHGAXxM NRP: Non Reusable Parts PART NO. DESCRIPTION Q'TY E1 DL31U1633AAA PCB, MAIN RTL 1 E2 DL32U1633AAA PCB, AUDIO RTL 1 E3 DL33U1633AAA PCB, IO RTL 1 E4 DL31U1634AA.
Pagina 75

E403 DFUP1644ZA FPC, SD(19MK2 SD LAN 24PIN) 1 E404 DFUP1586ZA FPC, HSDPA 50PIN 1 E405 DFUP1645ZA FPC, BT(19MK2 BT FPC 10PIN) 1 E406 DFUP1589ZA FPC, PAD 40PIN 1 E407 DFUP1591ZA FPC, LED LEFT 10PIN 2 E4.
Pagina 76

K11-6 DFHR3563YA LCD REAR CUSHION C NRP 1 K11-7 DFHR3564YA LCD REAR CUSHION D NRP 1 K11-8 DFHR3565YA LCD REAR CUSHION E NRP 2 K11-9 DFGB0165YA-0 TOUGHBOOK BADGE NEW NRP 1 K11-10 DFGB0131YA-0 PANASONIC.
Pagina 77

K13-8 DFUN0069XA LATCH KNOB SPRING 1 K14 S DFKM9041XA-0 BOTTOM CASE ASS'Y 1 K14-1 DFHM9016ZA-0 DIMM LID ASS'Y 1 K14-1-1 DFHM0401ZA-0 DIMM LID 1 K14-1-2 DFHR3E14ZA DIMM LID WP SHEET NRP 1 K14.
Pagina 78

K73 DFMC0877YA INVERTER CASE 1 K74 DFMC0878ZA INVERTER SHIELD SHEET NRP 1 K76 DFMX1267ZA INVERTER CASE(BASE) 1 K77 DFMX1268ZA INVERTER CASE(LOWER) 1 K78 DFQT6077YA CAUTION LABEL 1 K79 DFUQ0100ZA LOCK .
Pagina 79

K141 DFHG429YA IO DC TUBE 1 K142 DFHR3G38ZA DIMM CUSHION 3 K144 DFHP7270ZA ADHESIVE TAPE NRP 4 K157 DFMX1339ZA BAT INSULATION SHEET NRP 1 K158 DFHR3J82ZA LCD CABLE PROTECTER 1 K159 DFHR6352ZA CABLE GU.
Pagina 80

Replacement Parts List CF-19FHGAXxM PART NO. DESCRIPTION Q'TY MAIN PCB C 1, 135, 136, 137, 197, 198, 268, 279, 281, 328, 376 F1J0J4750019 CAPACITOR, 6.
Pagina 81

C 97, 255, 256, 315, 321, 336, 337, 340, 341, 342, 343, 386, 387, 389, 390, 525, 603, 726, 740, 751, 768 F1H1A1050015 CAPACITOR, 10V, 1µF 21 C 98, 99, 100, 101, 102, 103 , 104 F1G0J474A001 CAPACITOR, 6.3V, 0.47µF 7 C 105, 106, 107, 108, 109, 110 , 111 , 112 , 258 F1J0J226A051 CAPACITOR, 6.
Pagina 82

C 766 F1G1H152A496 CAPACITOR, 50V, 1500pF 1 CF 1, 2, 3 D4CC1103A038 THERMISTOR 3 CN 2 K1MYL0B00003 CONNECTOR 1 CN 4 K1NAF0D00003 CONNECTOR 1 CN 5 K1KY42B00001 CONNECTOR 1 CN 6 K1FY104BA024 CONNECTOR, .
Pagina 83

IC 23, 24, 25, 71 C0EBE0000460 IC 4 IC 26 C0EBH0000457 IC 1 IC 27 C2CBJA000003 IC, MICON 1 IC 30 C3FBLY000048 FLASH MEMORY 1 IC 31 C1CB00002790 IC, SECURITY CHIP 1 IC 33, 51, 52 C0JBAA000345 IC, LOGIC.
Pagina 84

Q 611, 639, 650 B1CFGD000003 TRANSISTOR 3 Q 613, 618, 633, 636, 638, 642, 647, 648, 652, 653, 660 B1CFRD000014 FET 11 Q 614, 640, 645 B1MBEDG00001 FET 3 Q 622, 627 B1CHRC000009 FET 2 Q 634, 635 B1CFRD.
Pagina 85

R 178, 286, 704 ERJ2GEJ471X RESISTOR, 1/16W, 470 Ω 3 R 181 D1HA1048A001 RESISTOR ARRAY 1 R 182 D1H81504A024 RESISTOR ARRAY 1 R 205, 206, 211 D1H84724A024 RESISTOR ARRAY 3 R 207 D1H81044A024 RESISTOR.
Pagina 86

R 653, 749, 760, 777, 779, 833 D1BDR033A099 RESISTOR, 1/3W, 0.033 Ω 6 R 664 ERJ2GEJ684X RESISTOR, 1/16W, 680K Ω 1 R 666 ERJ2GEJ225X RESISTOR, 1/16W, 2.2M Ω 1 R 678, 682 ERJ6GEYJ122V RESISTOR, 1/10W, 1.2K Ω 2 R 679, 680 ERJ6GEYJ222V RESISTOR, 1/10W, 2.
Pagina 87

CN 902 K1MY12BA0309 CONNECTOR 1 CN 904 K1KA02BA0014 CONNECTOR 1 D 902 B0JDBE000002 DIODE 1 F 902 S K5H202Z00005 FUSE, 2A, 32V 1 IC 900 C1CB00002733 AUDIO CODEC 1 IC 901 C0CBCBC00130 IC, REGURATOR 1 IC.
Pagina 88

C 802 F1G1E103A062 CAPACITOR, 25V, 0.01µF 1 C 803, 804, 806 F1G1C104A042 CAPACITOR, 16V, 0.1µF 3 C 805 F1J0J106A016 CAPACITOR, 6.3V, 10µF 1 CN 800 K1MY04BA0104 CONNECTOR 1 CN 801 K1MY06BA0309 CONNE.
Pagina 89

C 619 EEFCX0J121R CAPACITOR 1 C 622 F1G1H221A495 CAPACITOR, 50V, 220pF 1 CN 600 K1MN50BA0153 CONNECTOR 1 CN 601 K1MY52BA0190 CONNECTOR 1 CN 602 K1NA08E00013 SIM CONNECTOR 1 CN 604 K1MY10BA0309 CONNECT.
Pagina 90

C 913, 916 F1J0J106A016 CAPACITOR, 6.3V, 10µF 2 C 914 F1G0J224A001 CAPACITOR, 6.3V, 0.22µF 1 CN 900 K1MN04B00073 CONNECTOR 1 CN 901 K1KA06BA0014 CONNECTOR 1 IC 900 C0EBE0000460 IC 1 IC 902 C1CB00002.

Lees een handleiding Matsushita CF-19FHGAX - vermijd mogelijke problemen

Een belangrijk punt na aankoop van elk apparaat Matsushita CF-19FHGAX (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:

om te weten hoe het apparaat juist te gebruiken
om te weten, hoe het product te onderhouden/het uitvoeren van periodieke keuringen Matsushita CF-19FHGAX
om te weten hoe de mogelijke storingen te verwijderen Matsushita CF-19FHGAX

Als u nog geen Matsushita CF-19FHGAX heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Matsushita CF-19FHGAX vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Matsushita CF-19FHGAX leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Matsushita CF-19FHGAX krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.

In een situatie waarin je al een beziter van Matsushita CF-19FHGAX bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Matsushita CF-19FHGAX kunnen verkorten.

Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Matsushita CF-19FHGAX . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.

Matsushita CF-19FHGAX handleiding

Deel URL

Vergelijkbare instructies

Deel URL

Vergelijkbare instructies

Samenvatting van de inhoud op de volgende paginas van de handleiding

Pagina 1

Pagina 2

Pagina 3

Pagina 4

Pagina 5

Pagina 6

Pagina 7

Pagina 8

Pagina 9

Pagina 10

Pagina 11

Pagina 12

Pagina 13

Pagina 14

Pagina 15

Pagina 16

Pagina 17

Pagina 18

Pagina 19

Pagina 20

Pagina 21

Pagina 22

Pagina 23

Pagina 24

Pagina 25

Pagina 26

Pagina 27

Pagina 28

Pagina 29

Pagina 30

Pagina 31

Pagina 32

Pagina 33

Pagina 34

Pagina 35

Pagina 36

Pagina 37

Pagina 38

Pagina 39

Pagina 40

Pagina 41

Pagina 42

Pagina 43

Pagina 44

Pagina 45

Pagina 46

Pagina 47

Pagina 48

Pagina 49

Pagina 50

Pagina 51

Pagina 52

Pagina 53

Pagina 54

Pagina 55

Pagina 56

Pagina 57

Pagina 58

Pagina 59

Pagina 60

Pagina 61

Pagina 62

Pagina 63

Pagina 64

Pagina 65

Pagina 66

Pagina 67

Pagina 68

Pagina 69

Pagina 70

Pagina 71

Pagina 72

Pagina 73

Pagina 74