Gebruiksaanwijzing /service van het product SP-300 Series Synthesized Scanning Radio van de fabrikant Maxon Telecom
Ga naar pagina of 16
Operating Instructions SP - 300 Series Synthesized Scanning R adio (Models SP-310, SP-320, SP-330 & SP-340).
About Your SP-300 Series Radio Maxon's SP-300 Series radios feature 4 / 16 channel operation with superior performance and reliability. Operation and functions for Maxon's SP-300 Series radios are described in this manual. We urge you to thoroughly read this manual before operating the radio.
Table of Contents Safety Information..................................................................... Unpacking Information............................................................ SP-300 Series Features.........................................
Safety Information The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromag- netic energy emitted by FCC regulated equipment.
Unpacking Information Remove and carefully inspect the contents of your package(s) for the following items: Radio Battery Pack Antenna Spring Belt Clip Operating Instructions If any items are missing, please contact your Dealer or Maxon.
4 23 4 5 6 7 8 9 10 1 Description of Radio Components Front view: 1) Antenna Receptacle 2) Channel Selector Knob 3) On/Off - Volume Control 4) Busy/TX/BT Indicator (top plate of radio) 5) Accessory Co.
Antenna Installation Attach the antenna by turning clockwise into the antenna receptacle on top of the radio. Installing and Removing the Battery Pack Hold the radio face down in your hand. To attach the battery pack, pick up the pack by the sides and hold it so that the latch is facing upward.
6 Battery Charging and Care To ensure maximum performance from your radio, the battery pack must be fully charged before initial use. For continued performance, periodically discharge the battery completely and then fully recharge the pack. Proper care and charging will extend life of your battery pack.
7 NOTE: Federal Communications Commission Rules and Regulations require that you monitor a channel for activity before transmitting. NOTE: The tri-color LED located on the top panel can help with channel monitoring.
Status Indicators and Audible Alert Tones Your SP-300 Series has a sophisticated microprocessor control which provides a series of audible alert tones. Upon initial power up, a quick melody indicates that the self-test of the microprocessor functions has been completed satisfactorily.
Scan Modes Scanning is a Dealer programmable feature that allows you to monitor a number of channels. Your Dealer will help you define a channel "scan list" to be programmed into a scan channel (any channel, 1- 4 on models SP-310 or 320) or (any channel, 1-16 on models SP-330 or SP-340).
10 Other Scanning Features • Look Back: Any channel, when not in the scan mode, can be programmed to "look back" at the "Priority" channel.
Licensing and Service Information FCC Licensing The Federal Communications Commission requires that the operator of this radio be properly licensed under the applicable Part and / or Parts of the FCC Rules and Regulations. Consult with your Maxon Dealer, or contact the nearest FCC Field Office for information about obtaining a license.
12 Software Copyrights The Maxon product(s) described in these operating instructions may include copyrighted Maxon software programs stored in semi- conductor memories or other media.
Limited Warranty Topaz3 warrants the Products and included accessories sold herein will be free from defects in workmanship or materials under normal use and service for a period of two (2) years from the date of purchase by the original end user, provided that the buyer has complied with the requirements stated herein.
For more information, contact: Topaz3, LLC 10828 NW Air World Drive Kansas City, Missouri 64153 (Within USA) Phone: 1-800-821-7848, Ext. 399 (Outside USA) Phone: 1-816-891-6320, Ext.
Een belangrijk punt na aankoop van elk apparaat Maxon Telecom SP-300 Series Synthesized Scanning Radio (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Maxon Telecom SP-300 Series Synthesized Scanning Radio heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Maxon Telecom SP-300 Series Synthesized Scanning Radio vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Maxon Telecom SP-300 Series Synthesized Scanning Radio leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Maxon Telecom SP-300 Series Synthesized Scanning Radio krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Maxon Telecom SP-300 Series Synthesized Scanning Radio bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Maxon Telecom SP-300 Series Synthesized Scanning Radio kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Maxon Telecom SP-300 Series Synthesized Scanning Radio . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
