Gebruiksaanwijzing /service van het product 2005 Tribute van de fabrikant Mazda
Ga naar pagina of 272
Introduction 4 Instrument Cluster 14 W arning and control lights 14 Gauges 19 Entertainment Systems 21 AM/FM stereo with single CD 21 AM/FM stereo with in-dash six CD 25 Climate Controls 31 Manual hea.
Seating and Safety Restraints 70 Seating 70 Safety restraints 78 Air bags 93 Child restraints 107 Tires, Wheels and Loading 1 19 T ire Information 122 T ire Inflation 123 Changing tires 126 Lug Nut T .
Maintenance and Specifications 216 Engine compartment 224 Engine oil 226 Battery 230 Fuel information 238 Air filter(s) 252 Refill capacities 253 Engine data 255 Accessories 259 Index 260 All rights reserved.
CALIFORNIA Proposition 65 W arning W ARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
SAFETY AND ENVIRONMENT PROTECTION W arning symbols in this guide How can you reduce the risk of personal injury to yourself or others? In this guide, answers to such questions are contained in comments highlighted by a bold W ARNING statement. These comments should be read and observed.
BREAKING-IN YOUR VEHICLE There are no particular breaking-in rules for your vehicle. During the first 1,000 miles (1,600 km) of driving, vary speeds frequently .
Emission warranty The New V ehicle Limited W arranty includes Bumper to Bumper Coverage, Safety Restraint Coverage and Corrosion Coverage. In addition, your vehicle is eligible for Emissions Defect and Emissions Performance W arranties.
These are some of the symbols you may see on your vehicle. V ehicle Symbol Glossary Safety Alert See Owner ’ s Guide Protecting the Environment Fasten Safety Belt Air Bag-Front Air Bag-Side Passenge.
V ehicle Symbol Glossary Power W indows Power W indow Lockout Personal Alarm System Feature Engine Oil Engine Coolant Engine Coolant T emperature Do Not Open When Hot Battery A void Smoking, Flames, o.
INFORMATION ABOUT THIS GUIDE The information found in this guide was accurate at the time of printing. Mazda may change the contents without notice. REVIEW COPY 2005 Mazda Tribute (j14) , Owners Guide.
REVIEW COPY 2005 Mazda Tribute (j14) , Owners Guide (post-2002-fmt) (own2002) , Market: USA_English (fus) Instrument Cluster Instrument Cluster 11.
Instrument cluster (pg. 14) W indshield wiper/washer control (pg. 43) Driver air bag (pg. 93) Speed controls* (pg. 51) Instrument panel dimmer/dome light control (pg. 35) Hood release handle (pg. 223) Power mirror control* (pg. 50) Headlamp and turn signal control (pg.
Passenger airbag off indicator (pg. 97) Hazard flasher control (pg. 183) Audio system (pg. 21) Cigarette lighter* Fog lamp control* (pg. 33) Climate controls (pg. 31) Rear window defroster control (pg. 31) Auxiliary power point (pg. 48) Air conditioning control (pg.
W ARNING LIGHTS AND CHIMES W arning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle ’ s functions. Many lights will illuminate when you start your vehicle to make sure the bulb works.
2. Poor fuel quality or water in the fuel. 3. The fuel cap may not have been properly installed and securely tightened. These temporary malfunctions can be corrected by filling the fuel tank with high quality fuel of the recommended octane and/or properly installing and securely tightening the fuel cap.
It may take a long period of time for the system to detect an improperly installed fuel filler cap. For more information, refer to Fuel filler cap in the Maintenance and Specifications chapter .
Air bag readiness: If this light fails to illuminate when ignition is turned to ON, continues to flash or remains on, have the system serviced immediately by an authorized Mazda dealer . A chime will also sound when a malfunction in the supplemental restraint system has been detected.
Anti-theft system: Flashes when the Securilock 娂 Passive Anti-theft System has been activated. Refer to SecuriLock 娂 passive anti-theft system in the Locks and Security chapter . Speed control: Illuminates when the speed control is activated. T urns off when the speed control system is deactivated, refer to the Driver Controls chapter .
GAUGES Speedometer: Indicates the current vehicle speed. Engine coolant temperature gauge: Indicates engine coolant temperature. At normal operating temperature, the needle will be in the normal range (between “ H ” and “ C ” ). If it enters the red section, the engine is overheating.
Odometer: Registers the total miles (kilometers) of the vehicle. T rip odometer: Registers the miles (kilometers) of individual journeys. Press and hold the button for 1 or more seconds to reset. Press and release the button in less than 1 second to toggle between odometer and trip odometer .
AM/FM STEREO SINGLE CD AUDIO SYSTEM — SATELLITE READY CAPABILITY 1. CD: T o begin CD play , insert a CD into the slot, label side up. The system will auto-load the CD and begin play after a short pause. The disc number and the track number will illuminate in the display .
3. CLOCK: Press and release CLOCK to alternate between the time and the audio display . The clock can be set at any time when the ignition switch is in the ACC or ON position. Press and hold CLOCK for approximately two seconds until a beep sound is heard.
Press the AM or FM1/2 control to select a frequency . Press and momentarily hold the AUTO-M (Auto memory) control. The system will beep. Press the AUTO-M (Auto memory) control to select from the stored stations. One stored station will be selected and played each time the control is pressed.
11. DISC : Press to skip forward to the beginning of the next CD. 12. DISC Press to skip back to the beginning of the previous CD. 13. V olume/ON/OFF: Press to turn the system on/off. T urn to adjust the volume. 14. Memory presets: Y our audio is equipped with six station memory preset controls.
17. SA T : Y our radio comes equipped with Satellite ready capability . This enables you to view the song titles, artist, and further information. The kit to enable Satellite reception is available through your dealer . Detailed Satellite instructions are included with the dealer installed kit.
3. CLOCK: Press and release CLOCK to alternate between the time and the audio display . The clock can be set at any time when the ignition switch is in the ACC or ON position. Press and hold CLOCK for approximately two seconds until a beep sound is heard.
AUTO-M: Press the FM/AM control to select auto memory tuning which allows you to set strong radio stations without losing your original manually set preset stations. This feature is helpful on trips when you travel between cities with different radio stations.
10. RPT : Press during CD play to listen to a selection repeatedly . RPT will illuminate in the display and the current selection will be repeated. Press again to disengage repeat play . 11. DISC : Press to skip forward to the beginning of the next CD.
TRACK: Press on the TRACK control to skip forward to the beginning of the next track. Press to skip back to the beginning of the current track. 16. LOAD: Press to load a CD. Press LOAD and a memory preset to load a CD into a specific slot. Press and hold LOAD to enter up to six CDs one at a time.
• T ighten very loose tapes by inserting a finger or pencil into the hole and turning the hub. • Remove loose labels before inserting tapes. • Allow tapes which have been subjected to extreme heat, humidity or cold to reach a moderate temperature before playing.
MANUAL HEATING AND AIR CONDITIONING SYSTEM (IF EQUIPPED) 1. A/C: Press to activate A/C. The indicator light will illuminate to indicate A/C is functioning. 2. T emperature selection: Controls the temperature of the airflow in the vehicle. 3. Air flow selections: Controls the direction of the airflow in the vehicle.
W ARNING: Under some weather conditions, use of the recirculated air mode may lead to glass misting or fogging. Switch the air conditioner on and select the fresh air mode. Heated air can assist windscreen demisting. Operating tips • T o reduce fog build up on the windshield during humid weather , place the air flow selector in the position.
HEADLAMP CONTROL T urns the lamps off. T urns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps. T urns the headlamps on.
W ARNING: Always remember to turn on your headlamps at dusk or during inclement weather . The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision.
INSTRUMENT P ANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel. • Push and hold top of control to brighten. • Push and hold bottom of control to dim. V ERTICAL AIM ADJUSTMENT 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.
2. Measure the height from the center of your headlamp to the ground and mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall or screen at this height (a piece of masking tape works well). The center of the lamp is marked by a 3.0 mm circle on the headlamp lens.
TURN SIGNAL CONTROL • Push down to activate the left turn signal. • Push up to activate the right turn signal. INTERIOR LAMPS Cargo and dome lamp Rear cargo lamp equipped with an ON/OFF/DOOR control will light when: • the doors are closed and the control is in the ON position.
The map lamp controls (without moon roof) are located on the dome lamp. Press the button on either side of each map lamp to illuminate the lamps. Push the button again to turn off the lamps. For models equipped with a moon roof, the map lamps are located on the moon roof control panel.
Function Number of bulbs T rade number Park/turn lamps (front) 2 3157 AK (amber) Headlamps 2 9003 (HB2) Rear stop/tail lamps 2 W21/5W Rear turn lamps 2 WY21W (amber) Rear license plate lamps 2 W5W Bac.
Replacing headlamp bulbs NOTE: This procedure can be difficult. Y our Mazda dealer has the proper tools, training and parts to perform this task. If you have difficulty with this procedure, visit your local Mazda dealer . 1. Make sure that the headlamp control is in the OFF position.
Replacing side repeater bulbs 1. T urn the headlamp switch to off. 2. Carefully pry the lamp assembly away from the fender . 3. Rotate the bulb socket counterclockwise to remove it from the lamp assembly . 4. Pull the bulb straight out. Reverse steps to reinstall bulb(s).
Replacing license plate lamp bulbs 1. Push the license plate lamp assembly to the right and remove the assembly (located above the license plate) from the liftgate. 2. Remove bulb socket from lamp assembly by turning counterclockwise. 3. Pull the bulb out from the socket and push in the new bulb.
MUL TI-FUNCTION LEVER W indshield wiper: For intermittent operation, move control down one position. Adjust the rotary control to the desired speed setting. For normal or low speed wiper operation, move control down two positions from OFF . For high speed wiper operation, move control down three positions from OFF .
Rear window wiper/washer controls For intermittent operation of rear wiper , rotate end of control upward to the position. For normal speed rear wiper operation, rotate control upward to ON. T o activate the rear washer , rotate the control to the position and release.
Changing the wiper blades 1. Pull the wiper arm away from the vehicle. T urn the blade at an angle from the wiper arm. Push the lock pin manually to release the blade and pull the wiper blade down toward the windshield to remove it from the arm. 2. Attach the new wiper to the wiper arm and press it into place until a click is heard.
OVERHEAD CONSOLE (IF EQUIPPED) The appearance of your vehicle ’ s overhead console will vary according to your option package. Storage compartment (if equipped) Press the OPEN control to open the storage compartment. The door will open slightly and can be moved to full open.
Note: The length of the rubber actuator (1) is critical. Use care in cutting it to length. If the rubber actuator (1) is cut too much the aftermarket transmitter (6) will not activate the garage door opener . If the rubber actuator (1) is cut too long, the storage compartment door (3) will not close properly .
AUXILIARY POWER POINT (12VDC) W ARNING: Power outlets are designed for accessory plugs only . Do not insert any other object in the power outlet for this will damage the outlet and blow the fuse. Do not hang any type of accessory or accessory bracket from the plug.
W ARNING: When closing the power windows, you should verify they are free of obstructions and ensure that children and/or pets are not in the proximity of the window openings. The ignition must be in the ON position to adjust the power windows. Press and hold the bottom part of the rocker switch to open the window .
W ARNING: Do not leave children unattended in the vehicle and do not let children play with the power windows or moon roof. They may seriously injure themselves.
SPEED CONTROL (IF EQUIPPED) W ith speed control set, you can maintain a speed of 30 mph (48 km/h) or more without keeping your foot on the accelerator pedal.
• If the vehicle speed decreases more than 10 mph (16 km/h) below your set speed on an uphill, your speed control will disengage. Resuming a set speed Press the RSM (resume) control and release it. This will automatically return the vehicle to the previously set speed.
Reducing speed while using speed control There are two ways to reduce a set speed: • Press and hold the CST control until you get to the desired speed, then release the control. Y ou can also use the CST control to operate the T ap-Down function. Press and release this control to decrease the vehicle set speed in small amounts by 1 mph (1.
FUEL FILLER DOOR RELEASE HANDLE T o open the door , pull up the handle located next to the front left corner of the driver ’ s seat. MOON ROOF (IF EQUIPPED) T o operate the moon roof: • The moon roof is equipped with an automatic, one-touch, express opening feature.
CENTER CONSOLE Y our vehicle is equipped with a variety of console features. These include: 1. Power point 2. Cupholders 3. Utility compartment 4. Ash cup (if equipped) W ARNING: Use only soft cups in the cupholder . Hard objects can injure you in a collision.
W ARNING: Do not place any objects on the cargo area shade. They may obstruct your vision or strike occupants of vehicle in the case of a sudden stop or collision. LIFTGATE T o open the rear window , pull the right side of the liftgate handle. T o open the liftgate, pull the left side of the liftgate handle.
LUGGAGE RACK The maximum load for the roof rack is 100 lbs (45 kg), evenly distributed on the crossbars. If it is not possible to evenly distribute the load, position it in the center or as far forward on the crossbars (if equipped) as possible. Always use the adjustable tie down loops to secure the load.
KEYS One key operates all the locks and starts the vehicle. Always carry a spare key with you in case of an emergency . Y our keys are programmed to your vehicle; using a non-programmed key will not permit your vehicle to start. If you lose your dealer supplied keys, replacement keys are available through your authorized dealer .
7. T urn the ignition from the 3 (RUN) position to the 1 (OFF/LOCK) position. The horn will chirp one time to confirm the programming mode has been exited. Repeat the procedure to turn the feature on or off. Door key unlocking/locking T wo step door unlocking 1.
Childproof door locks • When these locks are set, the rear doors cannot be opened from the inside. • The rear doors can be opened from the outside when the doors are unlocked. The childproof locks are located on rear edge of each rear door and must be set separately for each door .
The remote entry system allows you to lock or unlock all vehicle doors without a key . The remote locking and unlocking features will operate independent of the ignition position; however , the panic feature will only operate when the ignition is in the 1 (OFF/LOCK) or 2 (ACCESSORY) position.
Locking the doors 1. Press and release to lock all the doors. Assuming all vehicle doors and the liftgate are properly closed, the park/turn lamps will flash once and the perimeter alarm (if equipped) will start the arming process.
2. Do not wipe off any grease on the battery terminals on the back surface of the circuit board. 3. Remove the old battery . Note: Please refer to local regulations when disposing of transmitter batteries. 4. Insert the new battery . Refer to the diagram inside the remote entry transmitter for the correct orientation of the battery .
T o reprogram the remote entry transmitters: 1. Ensure the vehicle is electronically unlocked. 2. Put the key in the ignition. 3. T urn the key from the 1 (OFF/LOCK) position to 3 (RUN). 4. Cycle eight times rapidly (within 10 seconds) between the 1 (OFF/LOCK) position and 3 (RUN).
Illuminated exit • The interior lights will illuminate when the key is removed from the ignition. The lamps automatically turn off after 25 seconds. The dome and cargo lamp controls must not be set to the OFF position for the illuminated exit system to operate.
If a problem occurs with the SecuriLock 娂 system, the indicator will flash rapidly or glow steadily when the ignition is in the 3 (RUN) position. If this occurs, the vehicle should be taken to an authorized Mazda dealer for service. Automatic arming The vehicle is armed immediately after switching the ignition to the 2 (ACCESSORY) position.
W ARNING: If an unprogrammed key is used in the ignition it will cause a “ no start ” condition. Programming spare keys Y ou can program your own coded keys to your vehicle. T ips: • A maximum of eight keys can be coded to your vehicle. • Only use SecuriLock 娂 keys.
7. W ithin twenty seconds of turning the ignition to the 1 (OFF/LOCK) position and removing the previously programmed coded key , insert the new unprogrammed key (new key/valet key) into the ignition. 8. T urn the ignition from the 1 (OFF/LOCK) position to the 3 (RUN) position.
When you lock the vehicle using any of the methods above: • the park/turn lamps will flash once to indicate the hood, each door and the liftgate are closed.
SEA TING Adjustable head restraints The purpose of these head restraints is to help limit head motion in the event of a rear collision. T o properly adjust your head restraints, lift the head restraint so that it is located directly behind your head or as close to that position as possible.
W ARNING: Sitting in a reclined position while the vehicle is moving is dangerous because you don ’ t get the full protection from seat belts. During sudden braking or a collision, you can slide under the lap belt and suffer serious internal injury , or in a rear end collision you could fly up and out of the vehicle.
Adjusting the front power seat (if equipped) W ARNING: Never adjust the driver ’ s seat or seatback when the vehicle is moving. Y ou could move out of position to control the vehicle. Then a serious accident could occur . Sudden braking or a collision could cause serious injury .
Move the control in the directions shown to move the seat forward, backward, up or down. Heated seats (if equipped) T o operate the heated seats: • Push the control located on the seat to activate. • Push again to deactivate. The heated seats will activate when the ignition is in the RUN position.
Push control to lower head restraint. Folding down rear seats (60/40 split bench) 1. Raise the rear seat head restraint and remove. 2. Place the head restraint under the front seat for storage. 3. Pull the seat release control. NOTE: Make sure the floor is clear of all objects before folding the seat.
4. Flip seat forward. Attach the seatbelt web snap button to the quarter trim panel snap button. This will assure that seatbelt does not get caught by staying out of the seat back folding path. 5. T o release seatback, pull the seatback release lever (on top of seat) toward the front seat.
6. Rotate seatback down into load floor position. Returning the rear seats to upright position 1. Pull seatback up and into upright position making sure seatback locks into place.
W ARNING: Make sure seat belt buckle heads are through elastic holders on seat backs. Seat belt buckle heads may break if they are trapped underneath the seatback as the seatback is rotated down. 3. Remove the head restraints stored under the front passenger seat and return them to the original position on the seat backs.
SAFETY RESTRAINTS Personal Safety System The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of air bag-related injuries.
Driver and passenger dual-stage air bag supplemental restraints The dual-stage air bags offer the capability to tailor the level of air bag inflation energy . A lower , less forceful energy level is provided for more common, moderate-severity impacts.
The front passenger sensing system can automatically turn off the passenger front air bag. The system is designed to help protect small (child size) occupants from air bag deployments when they are improperly seated or restrained in the front passenger seat contrary to proper child-seating or restraint usage recommendations.
Determining if the Personal Safety System is operational The Personal Safety System uses a warning light in the instrument cluster or a back-up tone to indicate the condition of the system. Refer to the W arning light section in the Instrument cluster chapter .
W ARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts.
W ARNING: All safety belts should be checked for proper function. Additionally , if the front air bags have deployed, the front pretensioners have also deployed and both front restraints must be replaced.
2. T o unfasten, push the release button and remove the tongue from the buckle. All safety belts in the vehicle are combination lap and shoulder belts.
How to use the automatic locking mode for use with child safety seats • Buckle the combination lap and shoulder belt. • Grasp the shoulder portion and pull downward until the entire belt is pulled out. • Allow the belt to retract. As the belt retracts, you will hear a clicking sound.
W ARNING: After any vehicle collision, the safety belt systems at all seating positions (except the driver position, which doesn ’ t have this feature) must be checked by a qualified technician to verify that the automatic locking retractor feature for child seats is still functioning properly .
When the side-curtain air bags (if equipped) and/or the front airbags are activated, the safety belt pretensioners for the driver and right front passenger seating positions will be activated when the respective seatbelt is properly buckled.
Use only extensions manufactured by the same supplier as the safety belt. Manufacturer identification is located at the end of the webbing on the label. Also, use the safety belt extension only if the safety belt is too short for you when fully extended.
Both the driver ’ s and passenger ’ s safety belt usages are monitored and either may activate the BeltMinder feature. The warnings are the same for the driver and the front passenger .
Reasons given... Consider ... ⬙ Crashes are rare events ⬙ 36,700 crashes occur every day . The more we drive, the more we are exposed to ⬙ rare ⬙ events, even for good drivers. 1 in 4 of us will be seriously injured in a crash during our lifetime.
Reasons given... Consider ... ⬙ I have an air bag ⬙ Air bags offer greater protection when used with safety belts. Frontal airbags are not designed to inflate in rear and side crashes or rollovers. ⬙ I ’ d rather be thrown clear ⬙ Not a good idea.
W ARNING: T o reduce the risk of injury , do not deactivate/activate the Belt Minder feature while driving the vehicle. 1. T urn the ignition switch to the RUN (or ON) position. (DO NOT ST ART THE ENGINE) 2. W ait until the safety belt warning light turns off.
NOTE: If unsure about the proper procedures, bring your vehicle to an authorized Mazda dealership for inspection. Inspect the safety belts to make sure there are no nicks, tears or cuts, replacing if necessary .
Important supplemental restraint system (SRS) precautions The supplemental restraint system is designed to work with the safety belt to help protect the driver and right front passenger from certain upper body injuries.
W ARNING: Do not put anything on or over the air bag module including hands or feet. Placing objects on or over the air bag inflation area may cause those objects to be propelled by the air bag into your face and torso causing serious injury .
W ARNING: Air bags can kill or injure a child in a child seat NEVER place a rear -facing child seat in front of an active air bag. If you must use a forward-facing child seat in the front seat, move the seat all the way back. Secure the seat and the child in it properly .
hearing loss. Because air bags must inflate rapidly and with considerable force, there is the risk of death or serious injuries such as fractures, facial and eye injuries or internal injuries, particularly to occupants who are not properly restrained or are otherwise out of position at the time of air bag deployment.
The front passenger sensing system is designed to meet the regulatory requirements of Federal Motor V ehicle Safety Standard (FMVSS) 208 and is designed to turn off the front passenger ’ s frontal a.
child in the front seat against all advice, then turn the vehicle off, remove the child restraint from the vehicle and reinstall the restraint following the child restraint manufacturer ’ s directions.
Objects Pass Airbag Off Indicator Light Passenger Airbag Empty seat Unlit Disabled Small (i.e. 3 ring binder , small purse, bottled water) Unlit Disabled Medium (i.
W ARNING: Unless serviced, the system may not function properly in the event of a collision. Disposal of air bags and air bag equipped vehicles For disposal of safety belt pretensioners, air bags, or air bag equipped vehicles, see your authorized Mazda dealership.
How does the side air bag system work? The design and development of the side air bag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Air Bag T echnical W orking Group.
to inflate in side-impact collisions, not roll-over , rear -impact, frontal or near -frontal collisions, unless the collision causes sufficient lateral deceleration. W ARNING: Several air bag system components get hot after inflation. Do not touch them after inflation.
Side-curtain air bag system (if equipped) Y ou can easily confirm if your vehicle has side-curtain air bags by looking inside the vehicle up at the upper ⬙ B ⬙ pillar where you will see an embossed ⬙ AIRBAG ⬙ label.
W ARNING: T o reduce risk of injury , do not obstruct or place objects in the deployment path of the inflatable side-curtain air bags (if equipped). How do the side-curtain air bags (if equipped) work.
lateral collisions or rollover events, the side-curtain air bags will be activated, regardless of which seats are occupied. In certain rollover events, the side-curtain air bag (if equipped) on both sides of the vehicle will be inflated, regardless of which seats are occupied.
Determining if the side-curtain airbags are operational The SRS uses a readiness light in the instrument cluster or a tone to indicate the condition of the system. Refer to the Air bag readiness section in the Instrumentation chapter . Routine maintenance of the air bag is not required.
NOTE: Always follow the instructions and warnings that come with any infant or child restraint you might use. W ARNING: When possible, always place children under age 12 in the rear seat of your vehicle. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position.
T o improve the fit of both the lap and shoulder belt on children who have outgrown child safety seats, Mazda recommends use of a belt-positioning booster seat. Booster seats position a child so that safety belts fit better . They lift the child up so that the lap belt rests low across the hips and the knees bend comfortably .
T ypes of booster seats There are two types of belt-positioning booster seats: • Those that are backless. If your backless booster seat has a removable shield, remove the shield and use the lap/shoulder belt.
W ARNING: Follow all instructions provided by the manufacturer of the booster seat. W ARNING: Never put the shoulder belt under a child ’ s arm or behind the back because it eliminates the protection for the upper part of the body and may increase the risk of injury or death in a collision.
• Put the safety belt in the automatic locking mode. Refer to Automatic locking mode . Mazda recommends the use of a child safety seat having a top tether strap. Install the child safety seat in a seating position which is capable of providing a tether anchorage.
2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together . 3. While holding the shoulder and lap belt portions together , route the tongue through the child seat according to the child seat manufacturer ’ s instructions.
5. T o put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard. 6. Allow the belt to retract. The belt will click as it retracts to indicate it is in the automatic locking mode.
Attaching child safety seats with tether straps Most new forward-facing child safety seats include a tether strap which goes over the back of the seat and hooks to an anchoring point. T ether straps are available as an accessory for many older safety seats.
3. Locate the correct anchor for the selected seating position. NOTE: There are three tether anchors located on the headliner at the rear of the vehicle. W ARNING: If the tether strap is clipped incorrectly , the child safety seat may not be retained properly in the event of a collision.
Attaching safety seats with LA TCH (Lower Anchors and T ethers for Children) attachments for child seat anchors Some child safety seats have two rigid or webbing mounted attachments that connect to two anchors at certain seating positions in your vehicle.
The lower anchors for child seat installation are located at the rear section of the rear seat between the cushion and seat back. The LA TCH anchors are below the locator symbols on the seatback. Follow the child seat manufacturer ’ s instructions to properly install a child seat with LA TCH attachments.
NOTICE TO UTILITY VEHICLE AND TRUCK OWNERS Utility vehicles and trucks handle differently than passenger cars in the various driving conditions that are encountered on streets, highways and off-road.
Power is supplied to all four wheels through a transfer case or power transfer unit. 4WD vehicles allow you to select different drive modes as necessary . Information on shifting procedures and maintenance can be found in your Owner ’ s Guide .Y o u should become thoroughly familiar with this information before you operate your vehicle.
• Narrower — to provide greater maneuverability in tight spaces, particularly in off-road use. As a result of the above dimensional differences, SUV ’ s and trucks often will have a higher center of gravity and a greater difference in center of gravity between the loaded and unloaded condition.
T readwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100.
Glossary of tire terminology • T ire label: A label showing the OE (Original Equipment) tire sizes, recommended inflation pressure and the maximum weight the vehicle can carry .
Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires and adjust if required. At least once a month and before long trips, inspect each tire and check the tire pressure with a tire gauge (including spare, if equipped).
Maximum Permissible Inflation Pressure is the tire manufactures ’ maximum permissible pressure and/or the pressure at which the maximum load can be carried by the tire.
TIRE REPLACEMENT REQUIREMENTS Y our vehicle is equipped with tires designed to provide a safe ride and handling capability . W ARNING: Only use replacement tires and wheels that are the same size and type (such as P-metric versus L T -metric or all-season versus all-terrain) as those originally provided by Mazda.
When driving with the T -type/mini-spare tire do not: • Exceed 50 mph (80 km/h) • Load the vehicle beyond maximum vehicle load rating listed on the Safety Compliance Label • T ow a trailer • U.
• Use snow chains on the end of the vehicle with the dissimilar spare tire/wheel The usage of a dissimilar spare tire/wheel can lead to impairment of the following: • Handling, stability and braki.
W ARNING: If the vehicle slips off the jack, you or someone else could be seriously injured. 1. Park on a level surface, activate hazard flashers and place gearshift lever in P (Park) (automatic transmission) or R (Reverse) (manual transmission). 2. Set the parking brake and turn engine off.
Remove the lug wrench from the jack in order to remove the spare tire from under the vehicle. Removing the spare tire or spare tire and tether (if equipped) 1. Insert the lug wrench through the access hole in the rear bumper . 2. T urn the handle counterclockwise and lower the spare tire until it can be slid rearward and the cable is slack.
5. Use the lug wrench to remove the lug nut from the spare tire tether . 6. If not replacing the spare or flat tire to the underbody storage area, raise winch up into the installed position. 7. Use the attached V elcro strap (2) to tie the tether end to the winch actuator shaft (if equipped).
Before placing the jack under the vehicle, NOTE the jack locations: • Front • Rear REVIEW COPY 2005 Mazda Tribute (j14) , Owners Guide (post-2002-fmt) (own2002) , Market: USA_English (fus) Tires, .
9. Lower the jack from its stored height to fit under the jacking notches. Position the jack according to the following guides and turn the jack handle clockwise until the tire is a maximum of 1 inch (25 mm) off the ground. Never use the differentials as a jacking point.
14. Reinstall the jack and tools in the cargo area. T o replace jack in vehicle, guide the jack bottom first in trim opening and position in bracket, secure retention clip on upper part of jack and close thumbscrew . Make sure the jack is fastened so it does not rattle when you drive.
5. T urn the jack handle clockwise until the tire is raised to its original position underneath the vehicle. The effort to turn the jack handle increases significantly as the tire contacts the frame. The spare tire carrier will ratchet when the tire is in the fully stowed position.
W ARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the front disc brake hub and rotor that contacts the wheel.
5. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter . 6. 95: Indicates the tire ’ s load index. It is an index that relates to how much weight a tire can carry .
8. U.S. DOT T ire Identification Number (TIN): This begins with the letters “ DOT ” and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code designating where it was manufactured, the next two are the tire size code and the last four numbers represent the week and year the tire was built.
13. Maximum Permissible Inflation Pressure: Indicates the tire manufacturers ’ maximum permissible pressure and/or the pressure at which the maximum load can be carried by the tire.
Information on “ T ” type tires “ T ” type tires have some additional information beyond those of “ P ” type tires; these differences are described below: T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
TIRE CARE Improper or inadequate vehicle maintenance can also cause tires to wear abnormally . Here are some of the important maintenance items: Tire wear Measure and inspect the tire tread on all your tires periodically . Advanced and unusual tire wear can reduce the ability of tread to grip the road in adverse (wet, snowy , etc.
Safety practices Driving habits have a great deal to do with your tire mileage and safety . • Observe posted speed limits • A void fast starts, stops and turns • A void potholes and objects on the road • Do not run over curbs or hit the tire against a curb when parking W ARNING: If your vehicle is stuck in snow , mud, sand, etc.
Wheel misalignment in the front or the rear can cause uneven and rapid treadwear of your tires and should be corrected by a qualified technician at a Mazda dealer . Front wheel drive (FWD) vehicles and those with an independent rear suspension require alignment of all four wheels.
• Rear Wheel Drive (RWD) vehicles/Four Wheel Drive (4WD)/All Wheel Drive (A WD) vehicles (front tires at top of diagram) Sometimes irregular tire wear can be corrected by rotating the tires.
Follow these guidelines when using snow tires and traction devices: • SAE class “ S ” cables should ONL Y be used on the front axle for P235/70R16 tires.
Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the T ire Label on the B-Pillar or the edge of the driver ’ s door . Look for “ THE COMBINED WEIGHT OF OCCUP ANTS AND CARGO SHOULD NEVER EXCEED XXX kg OR XXX lb.
Cargo W eight – includes all weight added to the Base Curb W eight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. GA W (Gross Axle W eight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload.
GA WR (Gross Axle W eight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label located on the driver ’ s door or B-Pillar . The total load on each axle must never exceed its GA WR.
GVWR (Gross V ehicle W eight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label located on the driver ’ s door or B-Pillar .
Maximum Loaded T railer W eight – is the highest possible weight of a fully loaded trailer the vehicle can tow . It assumes a vehicle with only mandatory options, no cargo (internal or external), a tongue load of 10 – 15% (conventional trailer) or king pin weight of 15 – 25% (fifth wheel trailer), and driver only (150 lb.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle.
Special loading instructions for owners of pickup trucks and utility-type vehicles W ARNING: For important information regarding safe operation of this type of vehicle, see the Preparing to drive your vehicle section in this chapter . W ARNING: Loaded vehicles may handle differently than unloaded vehicles.
• Use extra caution when driving while trailer towing. Refer to Driving while you tow in this chapter . • Service your vehicle more frequently if you tow a trailer . Refer to the “ Scheduled Maintenance ” section of this manual. • Do not tow a trailer until your vehicle has been driven at least 500 miles (800 km).
4x2 GCWR (Gross Combined W eight Rating)/T railer W eights .The T ribute is capable of pulling the maximum trailer weight(s) as specified above. Certain states require electric trailer brakes for trailers over a specified weight. The T ribute vehicle electrical system is not equipped to accommodate electric trailer brakes.
T owing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle and could result in: • engine damage • transmission damage • structural damage • loss of control • personal injury Preparing to tow Use the proper equipment for towing a trailer and make sure it is properly attached to your vehicle.
Driving while you tow When towing a trailer: • T urn off the speed control. The speed control may shut off automatically when you are towing on long, steep grades. • Consult your local motor vehicle speed regulations for towing a trailer . • T o eliminate excessive shifting, use a lower gear .
Replace the rear axle lubricant any time the axle has been submerged in water . Rear axle lubricant quantities are not to be checked or changed unless a leak is suspected or repair required. Disconnect the wiring to the trailer before backing the trailer into the water .
STARTING Positions of the ignition 1. LOCK, locks the gearshift lever and allows key removal. 2. ACCESSORY , allows the electrical accessories such as the radio to operate while the engine is not running. 3. ON, all electrical circuits operational. W arning lights illuminated.
W ARNING: If you smell exhaust fumes inside your vehicle, have your authorized Mazda dealer inspect your vehicle immediately . Do not drive if you smell exhaust fumes. Important safety precautions A computer system controls the engine ’ s idle revolutions per minute (RPM).
If starting a vehicle with a manual transmission: • Make sure the parking brake is set. • Push the clutch pedal to the floor . 3. T urn the key to 3 (ON) without turning the key to 4 (ST ART). Make sure the corresponding lights illuminate or illuminate briefly .
1. T urn the key to 4 (ST ART) without pressing the accelerator pedal and release as soon as the engine starts. The key will return to 3 (ON). 2. When the engine starts, release the key , then release the accelerator pedal gradually as the engine speeds up.
Have the exhaust and body ventilation systems checked whenever: • the vehicle is raised for service. • the sound of the exhaust system changes. • the vehicle has been damaged in a collision.
Four-wheel anti-lock brake system (ABS) Since your vehicle is equipped with an Anti-lock Braking System (ABS), a noise from the hydraulic pump motor and pulsation in the pedal may be observed during ABS braking events.
Brake Assist The Brake Assist system provides full braking force during panic braking situations. It detects a rapid application of the brake pedal and maximizes the amount of brake booster assist, helping the driver to achieve maximum braking pressure.
W ARNING: Always set the parking brake fully and make sure that the gearshift is securely latched in P (Park) (automatic transmission) or in 1 (First Gear) (manual transmission).
• uneven tire wear • loose or worn suspension components • loose or worn steering components • improper steering alignment PREPARING TO DRIVE YOUR VEHICLE Y our vehicle has special design and equipment features to make it capable of performing in a wide variety of circumstances.
AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED) Brake-shift interlock This vehicle is equipped with a brake-shift interlock feature that prevents the gearshift lever from being moved from P (Park) when the ignition is in the RUN position unless brake pedal is depressed.
W ARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). T urn the ignition to the LOCK position and remove the key whenever you leave your vehicle. W ARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly .
Understanding the gearshift positions of the 4 – speed automatic transaxle This vehicle is equipped with an adaptive T ransmission Shift Strategy . Adaptive Shift Strategy offers the optimal transmission operation and shift quality .
W ARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). T urn the ignition to the LOCK position and remove the key whenever you leave your vehicle. R (Reverse) W ith the gearshift lever in R (Reverse), the vehicle will move backward.
2 (Second) This position allows for second gear only . • Provides engine braking. • Use to start-up on slippery roads. • T o return to D (Overdrive), move the gearshift lever into the D (Overdrive) position. • Selecting 2 (Second) at higher speeds will cause the transaxle to downshift to second gear at the appropriate vehicle speed.
MANUAL TRANSAXLE OPERATION (IF EQUIPPED) Using the clutch V ehicles equipped with a manual transaxle have a starter interrupt interlock that prevents cranking of the engine unless the clutch pedal is depressed. When starting a vehicle with a manual transaxle, you must: 1.
Recommended shift speeds Upshift according to the following charts for best fuel economy: Upshifts when accelerating (recommended for best fuel economy) 1-2 14 mph (22 km/h) 2-3 25 mph (40 km/h) 3-4 3.
Parking your vehicle 1. Apply the brake and shift into the neutral position. 2. Set the parking brake. 3. Depress the clutch, then shift into 1 (First).
4. T urn the ignition to position 1 (LOCK) to shut the engine off and remove the ignition key . W ARNING: Do not park your vehicle in Neutral, it may move unexpectedly and injure someone.
• Blinks several times every minute when 4WD system requires service. Please bring your vehicle to your local dealer for service. Driving off-road with truck and utility vehicles 4WD vehicles are sp.
• It often may be less risky to strike small objects, such as highway reflectors, with minor damage to your vehicle rather than attempt a sudden return to the pavement which could cause the vehicle to slide sideways out of control or rollover . Remember , your safety and the safety of others should be your primary concern.
W ARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires may fail and injure a passenger or bystander . Emergency maneuvers • In an unavoidable emergency situation where a sudden sharp turn must be made, remember to avoid “ over -driving ” your vehicle, i.
A void excessive speed because vehicle momentum can work against you and cause the vehicle to become stuck to the point that assistance may be required from another vehicle. Remember , you may be able to back out the way you came if you proceed with caution.
“ T read Lightly ” is an educational program designed to increase public awareness of land-use regulations and responsibilities in our nations wilderness areas.
Descend a hill in the same gear you would use to climb up the hill to avoid excessive brake application and brake overheating. Do not descend in neutral; instead, disengage overdrive or manually shift to a lower gear . When descending a steep hill, avoid sudden hard braking as you could lose control.
• 4WD vehicles should be driven with traction devices as referred to in Using snow tires and traction devices in the T ires, Wheels and Loading chapter .
HAZARD FLASHER CONTROL The hazard flasher is located on the instrument panel by the radio. The hazard flashers will operate when the ignition is off. Push in the flasher control and all front and rear direction signals will flash. Press the flasher control again to turn them off.
FUSES AND RELAYS Fuses If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components. Note: Always replace a fuse with one that has the specified amperage rating.
Passenger compartment fuse panel The fuse panel is located on the right-hand side of the center console, by the instrument panel. Remove the panel cover to access the fuses. T o remove a fuse use the fuse puller tool provided on the fuse panel cover .
The fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 1 15A* T railer tow park lamps 2 5A* Radio (illumination) 3 15A* Front and rear park la.
Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 7 10A* Instrument cluster , Diagnostic connector , Power mirror switch, Radio 8 — Not used 9 30A** Power door locks, .
Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 32 10A* Brake-T ransmission shift lock 33 15A* Air bag module, Passenger Air bag Deactivation (P AD) indicator lamp, Oc.
The high-current fuses are coded as follows. Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 1 25A* I/P fuse panel (RUN/ST ART) 2 25A* Headlamp power 3 25A* High beams, T urn si.
Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 19 40A** Accessory delay relay - Subwoofer and 4WD, Low beam 20 60A** ABS 21 40A** Horn, CHMSL, Cluster , Power locks and power s.
W ARNING: Steam from an overheated engine is dangerous. The escaping steam could seriously burn you. Open the hood ONL Y after steam is no longer escaping from the engine. 4. Check whether coolant or steam is escaping from under the hood or from the engine compartment.
W ARNING: Batteries contain sulfuric acid which can burn skin, eyes and clothing, if contacted. Do not attempt to push start your vehicle. Automatic transmissions do not have push-start capability . Preparing your vehicle When the battery is disconnected or a new battery is installed, the transmission must relearn its shift strategy .
2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery . 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery .
4. Make the final connection of the negative (-) cable to an exposed metal part of the disabled vehicle ’ s engine, away from the battery and the fuel injection system. NOTE: Do not use fuel lines, engine rocker covers or the intake manifold as grounding points.
Removing the jumper cables Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery .
3. Remove the jumper cable from the positive (+) terminal of the booster vehicle ’ s battery . 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle ’ s battery .
WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or , if you are a member of a roadside assistance program, your roadside assistance service provider . It is recommended that your vehicle be towed with a wheel lift and dollies or flatbed equipment.
On 4WD vehicles, it is required that your vehicle be towed with a wheel lift and dollies or flatbed equipment with all the wheels off the ground. If the vehicle is towed by other means or incorrectly , vehicle damage may occur .
CUSTOMER ASSISTANCE (U.S.A. MAINLAND AND HAWAII) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
6. Y our question(s) If you live outside the U.S.A., please contact your nearest Mazda Distributor . CUSTOMER ASSISTANCE (CANADA) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
The Department, in cooperation with the local Mazda Service Representative, will review the case to determine if everything possible has been done to ensure your satisfaction. Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealer ’ s service facilities.
REGIONAL OFFICES Regional Offices Areas Covered Mazda Canada Inc. W estern Region 8171 Ackroyd Road Suite 2000 Richmond, B.C. V6X 3K1 (604) 303 – 5670 Alberta, British Columbia, Manitoba, Saskatchewan, Y ukon Mazda Canada Inc. Central Region 305 Milner A venue Suite 400 Scarborough, Ontario.
STEP 2 If, after following STEP 1, you feel the need for further assistance, please contact your area ’ s Mazda representative (Indicated on the next page). Please help us by providing the following information: 1. Y our name, address, and telephone number 2.
CANADA Mazda Canada, Inc. 305 Milner A venue, Suite 400 Scarborough, Ontario M1B 3V4 Canada TEL: 1 (800) 263 – 4680 (in Canada) (416) 609 – 9909 (outside Canada) PUERTO RICO Plaza Motors Corp. (Mazda de Puerto Rico) P .O. Box 362722, San Juan, Puerto Rico 00936 – 2722 TEL: (787) 788 – 9300 GUAM (d.
W ARNING: Installation of Non-Genuine Parts or Accessories: Installation of non-genuine parts or accessories could be dangerous. Improperly designed parts or accessories could seriously affect your vehicle ’ s performance or safety system. This could cause you to have an accident or increase your chances of injuries in an accident.
The differences may make it difficult or even impossible for your vehicle to receive satisfactory servicing in other countries. W e strongly recommend that you NOT take your Mazda outside the United States.
Please refer to your manufacturers warranty booklet for more information. REPORTING SAFETY DEFECTS If you believe that your vehicle has a defect which could cause a crash or could cause injury or deat.
SERVICE PUBLICATIONS Factory-authorized Mazda service publications are available for owners who wish to do some of their own maintenance and repair . When requesting any of our publications through an Authorized Mazda Dealer , refer to the chart below .
California Civil Code Section 1793.22(b) presumes that the manufacturer has had a reasonable number of attempts to conform the vehicle to its applicable express warranties if, within the first 18 months of ownership of a new vehicle or the first 18,000 miles (29,000 km), whichever occurs first: 1.
W ASHING THE EXTERIOR W ash your vehicle regularly with cool or lukewarm water and a neutral Ph shampoo, such as an approved shampoo available from your Mazda dealer . • Never use strong household detergents or soap, such as dish washing or laundry liquid.
PAINT CHIPS Y our dealer has touch-up paint to match your vehicle ’ s color . T ouch-up paint can be used to repair minor scratches to painted surfaces. • Remove particles such as bird droppings, tree sap, insect deposits, tar spots, road salt and industrial fallout before repairing paint chips.
• 2.3L DOHC I4 Engine • 3.0L DOHC V6 Engine • Never wash or rinse the engine while it is running; water in the running engine may cause internal damage.
PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products are available from your dealer . • For routine cleaning, use One Step W ash and W ax Concentrate, available at your authorized Mazda dealer .
INTERIOR TRIM • Clean the interior trim areas with a damp cloth, then dry by wiping with a dry , soft, clean cloth. • Do not use household or glass cleaners as these may damage the finish.
UNDERBODY Flush the complete underside of your vehicle frequently . Keep body and door drain holes free from packed dirt. MAZDA CAR CARE PRODUCTS Y our Mazda dealer has many quality products available to clean your vehicle and protect its finishes.
INTRODUCTION Be extremely careful to prevent injury to yourself and others or damage to your vehicle when using this manual for inspection and maintenance. If you ’ re unsure about any procedure it describes, we strongly urge you to have a reliable and qualified service shop perform the work, preferably an Authorized Mazda Dealer .
NOTE: After the described period, continue to follow the described maintenance at the recommended intervals. SCHEDULE 1 I : Inspect and repair , clean, adjust, or replace if necessary (Oil-permeated a.
Maintenance Item Maintenance Interval (Number of months or km (miles), whichever comes first) Months 6 12 18 24 30 36 42 48 54 60 66 72 x 1000 Km 12 24 36 48 60 72 84 96 108 120 132 144 (x 1000 Miles) (7.5) (15) (22.5) (30) (37.5) (45) (52.5) (60) (67.
SCHEDULE 2 I : Inspect and repair , clean, adjust, or replace if necessary (Oil-permeated air filter cannot be cleaned using the air -blow method) R : Replace L : Lubricate Maintenance Item Maintenanc.
Maintenance Item Maintenance Interval (Number of months or km (miles), whichever comes first) Months 4 8 12 16 20 24 28 32 36 40 44 48 x 1000 Km 8 16 24 32 40 48 56 64 72 80 88 96 (x 1000 Miles) (5) (.
long-term reliability . *2 If the vehicle is operated under any of the following conditions, change the spark plugs every 60,000 miles (96,000 km) or shorter . a) Repeated short-distance driving. b) Extended periods of idling or low-speed operation. c) Driving for long periods in cold temperatures or extremely humid climates.
PRECAUTIONS WHEN SERVICING YOUR VEHICLE W ARNING: A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot. Y ou could be burned. Don ’ t inspect the coolant system or add coolant when the engine is hot.
OPENING THE HOOD 1. Inside the vehicle, pull the hood release handle located under the bottom of the instrument panel. 2. At the front of the vehicle, lift up on the auxiliary latch handle located in the center between the hood and the grille. 3. Lift the hood open and secure it with the prop rod.
IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 2.3L I4 engine 1. Power steering fluid reservoir 2. Engine coolant reservoir 3. Automatic transmission dipstick (if equipped) 4. Brake/Clutch fluid reservoir 5. Air filter assembly 6. Power distribution box 7.
3.0L DOHC V6 engine 1. Power steering fluid reservoir 2. Engine coolant reservoir 3. Automatic transmission fluid dipstick 4. Brake fluid reservoir 5. Air filter assembly 6. Power distribution box 7. Battery 8. Engine oil dipstick 9. Engine oil filler cap 10.
WINDSHIELD WASHER FLUID Check the washer fluid whenever you stop for fuel. The reservoir is highlighted with a symbol. Add fluid to fill the reservoir if the level is low . In very cold weather , do not fill the reservoir completely . Only use a washer fluid that meets Mazda specifications.
3. Set the parking brake and ensure the gearshift is securely latched in P (Park) (automatic transmissions) or 1 (First) (manual transmissions). 4. Open the hood. Protect yourself from engine heat. 5. Locate and carefully remove the engine oil level indicator (dipstick).
• If the oil level is below the MIN or ADD mark, add enough oil to raise the level within the MIN – MAX or ADD-FULL range. • 2.3L I4engine • 3.0L DOHC V6 engine • Oil levels above the MAX or FULL mark may cause engine damage. Some oil must be removed from the engine by a service technician.
3. Recheck the engine oil level. Make sure the oil level is not above the MAX or FULL mark on the engine oil level indicator (dipstick). 4. Install the indicator and ensure it is fully seated. 5. Fully install the engine oil filler cap by turning the filler cap clockwise 1/4 of a turn until it is seated.
It is recommended you use the appropriate Genuine Mazda oil filter (or another brand meeting Mazda specifications) for your engine application. BATTERY Y our vehicle is equipped with a Mazda maintenance-free battery which normally does not require additional water during its life of service.
W ARNING: Batteries normally produce explosive gases which can cause personal injury . Therefore, do not allow flames, sparks or lighted substances to come near the battery . When working near the battery , always shield your face and protect your eyes.
NOTE: • The vehicle may need to be driven to relearn the idle and fuel trim strategy . • If you do not allow the engine to relearn its idle trim, the idle quality of your vehicle may be adversely affected until the idle trim is eventually relearned.
60%, the engine parts could become damaged or not work properly . A 50 – 50 mixture of coolant and water provides the following: • freeze protection down to -34 ° F (-36 ° C). • boiling protection up to 265 ° F (129 ° C). • protection against rust and other forms of corrosion.
W ARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly . Also, you can be burned if you spill coolant on hot engine parts. W ARNING: Do not put engine coolant in the windshield washer fluid container .
water to the “ FULL COLD ” level. For all other vehicles, which have a coolant degas system with a pressurized cap, or if it is necessary to remove the coolant pressure relief cap on the radiator of a vehicle with an overflow system, follow these steps to add engine coolant.
If you have to add more than 1.0 quart (1.0 liter) of engine coolant per month, have your dealer check the engine cooling system. Y our cooling system may have a leak. Operating an engine with a low level of coolant can result in engine overheating and possible engine damage).
• Decreased engine coolant concentrations below 40% will decrease the freeze protection characteristics of the engine coolant and may cause engine damage. • Refer to the chart on the coolant container to ensure the coolant concentration in your vehicle will provide adequate protection at the temperatures in which you drive.
When fail-safe mode is activated Y ou have limited engine power when in the fail-safe mode, so drive the vehicle with caution. The vehicle will not be able to maintain high-speed operation and the engine will run rough. Remember that the engine is capable of completely shutting down automatically to prevent engine damage, therefore: 1.
W ARNING: Automotive fuels can cause serious injury or death if misused or mishandled. W ARNING: Gasoline may contain benzene, which is a cancer -causing agent. Observe the following guidelines when handling automotive fuel: W ARNING: Automotive fuels can be harmful or fatal if swallowed.
• Be particularly careful if you are taking “ Antabuse ” or other forms of disulfiram for the treatment of alcoholism. Breathing gasoline vapors, or skin contact could cause an adverse reaction. In sensitive individuals, serious personal injury or sickness may result.
Studies indicate that these additives can cause your vehicle ’ s emission control system to deteriorate more rapidly . In Canada, premium grade fuel generally contains more metallic additives than regular fuel. W e recommend using regular grade fuel.
Cleaner air Mazda endorses the use of reformulated “ cleaner -burning ” gasolines to improve air quality . Running out of fuel A void running out of fuel because this situation may have an adverse affect on powertrain components.
W ARNING: The fuel system may be under pressure. If the fuel filler cap is venting vapor or if you hear a hissing sound, wait until it stops before completely removing the fuel filler cap.
vehicle after the fuel gauge indicates empty , you might not be able to refuel the full amount of the advertised capacity of the fuel tank due to the empty reserve still present in the tank.
Habits • Smooth, moderate operation can yield up to 10% savings in fuel. • Steady speeds without stopping will usually give the best fuel economy . • Idling for long periods of time (greater than one minute) may waste fuel. • Anticipate stopping; slowing down may eliminate the need to stop.
• Adding certain accessories to your vehicle (for example bug deflectors, rollbars/light bars, running boards, ski/luggage racks) may reduce fuel economy . • Using fuel blended with alcohol may lower fuel economy . • Fuel economy may decrease with lower temperatures during the first 8 – 10 miles (12 – 16 km) of driving.
W ARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover . The emission system heats up the engine compartment and exhaust system, which can start a fire.
Allow the vehicle to sit for at least eight hours without starting the engine. Then, start the engine and complete the above driving cycle. The engine must warm up to its normal operating temperature. Once started, do not turn off the engine until the above driving cycle is complete.
BRAKE/CLUTCH (IF EQUIPPED) FLUID RESERVOIR Brake and clutch systems are supplied from the same reservoir . The fluid level will drop slowly as the brakes wear , and will rise when the brake components are replaced. Fluid levels between the “ MIN ” and “ MAX ” lines are within the normal operating range, there is no need to add fluid.
6. Install the dipstick making sure it is fully seated in the filler tube. 7. Remove the dipstick and inspect the fluid level. The fluid should be in the crosshatch zone for normal operating temperature.
If an overfill occurs, excess fluid should be removed by a qualified technician. An overfill condition of transmission fluid may cause shift and/or engagement concerns and/or possible damage. Do not use supplemental transmission fluid additives, treatments or cleaning agents.
W ARNING: Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes with running water for 15 minutes. Seek medical attention if irritation persists.
6. Install a new air filter element. Be careful not to crimp the filter element edges between the air filter housing and cover . This could cause filter damage and allow unfiltered air to enter the engine if not properly seated. 7. Replace the air filter housing cover and secure the clamps.
Fluid Classification Application Capacity T ransmission fluid 1 API service GL-4, SAE 75W -90 Manual transaxle (2WD) 2.3L (2.4 quarts) 2 Manual transaxle (4WD) 2.4L (2.5 quarts) 2 MERCON 威 A TF 2.3L / 3.0L engine with Automatic transaxle and oil cooler 9.
1 Ensure the correct automatic transmission fluid is used. T ransmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON 威 and MERCON 威 V are not interchangeable. DO NOT mix MERCON 威 and MERCON 威 V . Refer to your scheduled maintenance section to determine the correct service interval.
V EHICLE DIMENSIONS Dimensions 4 Door - inches (mm) (1) V ehicle height w/o roof rack / with roof rack 67.7 (1,720)/70.0 (1,779) (2) Front track / rear 61.3 (1,557)/60.9 (1,548) (3)Overall width (body) 72.0 (1,828) (4) Wheelbase 103.2 (2,621) (5)Overall length w/o trailer hitch / with trailer hitch 174.
IDENTIFYING YOUR VEHICLE Certification label The National Highway T raffic Safety Administration Regulations require that a Certification Label be affixed to a vehicle and prescribe where the Certification Label may be located.
V ehicle identification number (VIN) The vehicle identification number is attached to a metal tag and is located on the driver side instrument panel. (Please note that in the graphic XXXX is representative of your vehicle identification number .
CELL PHONES Use of cell phones and other devices by driver: W ARNING: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous. Dialing a number on a cell phone while driving also ties-up the driver ’ s hands.
A ABS (see Brakes) .....................163 Accessory delay .......................... 49 Air bag supplemental restraint system .................... 93 – 94, 101, 104 and child safety seats .............. 95 description ................94, 101, 104 disposal .
wheels ...................................... 211 wiper blades ............................ 213 Climate control (see Air conditioning or Heating) ............31 Clock adjust 6-CD in dash ............................. 26 AM/FM/CD ......................
comparisons with EP A fuel economy estimates ................. 246 detergent in fuel ..................... 242 filling your vehicle with fuel ........................... 238, 242 – 243 filter , specifications ................ 243 fuel filler door release .
daytime running light ...............33 fog lamps ................................... 33 headlamps ................................. 33 headlamps, flash to pass .......... 34 instrument panel, dimming ..... 35 interior lamps ..................... 37 – 38 replacing bulbs .
Safety belts (see Safety restraints) ........................ 78, 81 – 86 Safety Canopy ........................... 102 Safety defects, reporting .......... 209 Safety restraints .............. 78, 81 – 86 belt minder .............................
V ehicle Identification Number (VIN) .......................................... 258 V ehicle loading .......................... 145 V entilating your vehicle ........... 162 W W arning lights (see Lights) ....... 14 W asher fluid .....................
266.
267.
268.
269.
270.
271.
272.
Een belangrijk punt na aankoop van elk apparaat Mazda 2005 Tribute (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mazda 2005 Tribute heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mazda 2005 Tribute vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mazda 2005 Tribute leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mazda 2005 Tribute krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mazda 2005 Tribute bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mazda 2005 Tribute kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mazda 2005 Tribute . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
