Gebruiksaanwijzing /service van het product 898393001 van de fabrikant Mercury Marine
Ga naar pagina of 40
i All of us at Mercury Marine want to thank you for choosing a Mercury Marine Inflatable boat. You have made a sound investment in boating pleasure. We firmly believe it will bring you many years of boating fun and excitement. This Owners Manual contains all the safety and operating information you need to get the most out of your Inflatable boat.
ii Record your Hull Identification Number (HIN) and engine model/ serial number. The HIN is located on the back of the boat on the starboard side. The engine model/serial number is located on the swivel bracket. You will need this information to obtain parts, warranty service or provide information if your inflatable boat is stolen.
TABLE OF CONTENTS iii WARRANTY INFORMATION Transfer of Warranty .................................................................... 1 Warranty Registration United States and Canada ....................... 1 Mercury Inflatable Boat Limited Warranty United States and Canada .
TABLE OF CONTENTS iv Drain Valve Operation ............................................................... 29 Loading ...................................................................................... 29 Towing ....................................
WARRANTY INFORMATION 1 Transfer of Warranty The limited warranty is transferable to a subsequent purchaser, but only for the remainder of the unused portion of the limited warranty.
WARRANTY INFORMATION 2 Mercury Marine Attn: Warranty Registration Department W6250 W. Pioneer Road P.O. Box 1939 Fond du Lac, WI 54936-1939 920-929-5054 Fax 920-929-5893 NOTE: Registration lists must .
WARRANTY INFORMATION 3 DURATION OF COVERAGE The fiberglass hull, air deck® floor, all hull attachments and accessories, but not limited to, floorboards.
WARRANTY INFORMATION 4 HOW TO OBTAIN WARRANTY COVERAGE The customer must provide Mercury with a reasonable opportunity to repair, and reasonable access to the product for warranty service. Warranty claims shall be made by delivering the product for inspection to a Mercury dealer authorized to service the product.
WARRANTY INFORMATION 5 DISCLAIMERS AND LIMITATIONS: THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE EXPRESS WARRANTY.
GENERAL INFORMATION 6 Boater's Responsibilities The operator (driver) is responsible for the correct and safe operation of the boat and safety of its occupants and general public. It is strongly recommended that each operator (driver) read and understand this entire manual before operating the boat.
GENERAL INFORMATION 7 Lanyard Stop Switch The purpose of a lanyard stop switch is to turn off the engine when the operator moves far enough away from the operator's position (as in accidental ejection from the operator's position) to activate the switch.
GENERAL INFORMATION 8 Important Safety Information: The purpose of a lanyard stop switch is to stop the engine when the operator moves far enough away from the operator's position to activate the switch.
GENERAL INFORMATION 9 ! WARNING Avoid serious injury or death from deceleration forces resulting from accidental or unintended stop switch activation. The boat operator should never leave the operator's station without first disconnecting the stop switch lanyard from the operator.
GENERAL INFORMATION 10 WHILE BOAT IS STATIONARY ! WARNING Stop your engine immediately whenever anyone in the water is near your boat. Serious injury to the person in the water is likely if contacted by a rotating propeller, a moving boat, a moving gearcase, or any solid device rigidly attached to a moving boat or gearcase.
GENERAL INFORMATION 11 There is another less common hazardous result from allowing your boat to launch off a wave or wake. If the bow of your boat pitches down far enough while airborne, upon water contact it may penetrate under the water surface and submarine for an instant.
GENERAL INFORMATION 12 • The boat could move suddenly in a new direction. Such a sharp change in direction can cause occupants to be thrown out of their seats or out of the boat. • A rapid reduction in speed. This will cause occupants to be thrown forward, or even out of the boat.
GENERAL INFORMATION 13 ! WARNING Avoid the combination of a running engine and poor ventilation. Prolonged exposure to carbon monoxide in sufficient concentration can lead to unconsciousness, brain damage, or death. GOOD VENTILATION Ventilate passenger area, open side curtains, or forward hatches to remove fumes.
GENERAL INFORMATION 14 WHILE BOAT IS MOVING a b 21628 a - Running the boat with the trim angle of the bow too high b - Running the boat with no forward hatches open Safe Boating Suggestions In order t.
GENERAL INFORMATION 15 Never be under the influence of alcohol or drugs while boating (it is the law) . Alcohol or drug use impairs your judgment and greatly reduces your ability to react quickly.
GENERAL INFORMATION 16 Specifications Description Model 300 330 350 Dry weight 59 kg (130 lb.) 69 kg (152 lb.) 84 kg (185 lb.) Maximum load 475 kg (1047 lb.) 535 kg (1179 lb.) 572 kg (1261 lb.) Maximum engine power 7.5 kw (10 hp) 11.2 kw (15 hp) 18.6 kw (25 hp) Maximum engine weight 50 kg (110 lb.
GENERAL INFORMATION 17 Manufacturer's Plate The manufacturer's plate is located on the inside of the boat transom. a b c d e f g h i 14598 a - Boat design category ‑ see following table b .
GENERAL INFORMATION 18 Boat Design Categories Navigation Wind Force and Wave Height C Inshore Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions may experience wind force 6 (Beaufort scale) and wave heights up to 2 m (6.
BOAT COMPONENTS 19 Components Location ‑ Model 300 BACK VIEW a 24439 a - Hull identification number (HIN) FRONT VIEW a 24441 a - Front mooring ring.
BOAT COMPONENTS 20 TRANSOM VIEW a b c d e c 24447 a - Drain plug b - Hull drain plug c - Rear lifting ring d - Motor plate e - Manufacturer's plate.
BOAT COMPONENTS 21 SIDE VIEW b c d e a 24448 a - Port air chamber valve b - Front air chamber valve c - Front lifting ring d - Starboard air chamber valve e - Oars Components Location ‑ Model 330 an.
BOAT COMPONENTS 22 FRONT VIEW a 24441 a - Front mooring ring TRANSOM VIEW a b c d b 24451 a - Drain plug b - Rear lifting ring c - Motor plate d - Manufacturer's plate.
BOAT COMPONENTS 23 SIDE VIEW a b e f 24452 c d a - Paddle location b - Port air chamber valve c - Front lifting rings (2) d - Front air chamber valve e - Storage compartment f - Starboard air chamber .
TRANSPORTING 24 Trailering Boat Use a trailer that will properly support the boat hull. Position the boat on the trailer so it will rest in a stable position on the trailer supports. The boat must be properly secured to the trailer. Secure the boat to the trailer using tie‑down straps.
OPERATION 25 Inflation ! CAUTION Do not use a compressed air source to fill air chambers. Over inflation may result in damaged seams and or bulkheads. Seams and or bulkheads ruptured from over inflation, are not covered under the warranty. IMPORTANT: Do not inflate or deflate one air chamber at a time.
OPERATION 26 NOTE: Always be aware of the air pressure in the air chambers. The air volume inside the air chambers will expand as the internal air temperature rises, this will cause the air pressure to fluctuate depending on water temperature and weather conditions.
OPERATION 27 Empty the boat of all equipment. Make sure nobody is on‑board during lifting. 14774 Outboard Power Choose an outboard for the boat that is in accordance with the horsepower range and maximum weight limit.
OPERATION 28 • Check the outboard for tightness on the transom. • Know the fuel capacity and cruising range. • Check that the lanyard stop switch for the outboard works correctly. • Be sure the boat is not overloaded. Do not exceed the maximum number of passengers or load capacity.
OPERATION 29 Drain Valve Operation When underway, remove the drain plug from the drain and the water will automatically run out. The inner diaphragm will prevent water from returning.
OPERATION 30 Towing If the inflatable boat is to be towed by another boat, the inflatable boat must be empty. Remove outboard, fuel tank and equipment. Attach a single towing line to the mooring ring on front of the hull and tow the boat at slow speed.
MAINTENANCE 31 Cleaning Procedure FABRIC SURFACES Inflate the air chambers. Clean the fabric with a mild soap and fresh water solution. Rinse with fresh water and dry thoroughly. IMPORTANT: Do not use a vinyl preservative on the air chamber fabric. Chemicals in the preservatives may dry out the fabric.
MAINTENANCE 32 The repair kit which comes with the boat is a one part glue operation and should be used for emergency minor repair. For a permanent repair, a two part Hypalon glue should be used. This two part Hypalon glue and patching materials are available from Mercury Marine.
MAINTENANCE 33 Apply two thin layers of adhesive using a short bristle brush, in a circular pattern on both the backside of the patch and the patch area on the boat. Allow the first layer to dry completely (approximately 15 minutes) before applying the second layer.
MAINTENANCE 34 For the best results when gluing, the relative humidity should be less than 60%, ambient air temperature should be between 18 °C to 25 °C (65 °F to 77 °F) and not in direct sunlight. Cut out a patch large enough to overlap the damaged area by 38 mm (1.
STORAGE 35 Storage Preparation NOTE: The boat should be cleaned and rinsed with fresh water before being placed in long term storage. Refer to cleaning procedure. IMPORTANT: To prevent hull or fabric discoloration from marine growth or polluted waters, do not store the boat in water for extended periods of time.
OWNERS SERVICE ASSISTANCE 36 Service Assistance Your satisfaction with your inflatable product is very important to your dealer and to us. If you ever have a problem, question or concern about your inflatable boat or outboard motor, contact your dealer or any authorized Mercury Marine dealership.
Een belangrijk punt na aankoop van elk apparaat Mercury Marine 898393001 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mercury Marine 898393001 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mercury Marine 898393001 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mercury Marine 898393001 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mercury Marine 898393001 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mercury Marine 898393001 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mercury Marine 898393001 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mercury Marine 898393001 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
