Gebruiksaanwijzing /service van het product SP915G van de fabrikant MicroNet Technology
Ga naar pagina of 35
User ’ s Manual Wireless LAN Out door Bridge Model No.: SP915G http://www .micronet.info 1.
Table of Contents T able of Contents ........................................................................................... 2 Package Contents .......................................................................................... 4 Hardware Setup .
Bridge and Bridge ........................................................................................................... 22 DHCP Server Setting ........................... 23 Fi V i Re Æ DHCP ......................................... W AN Setting Æ WA N .
z Wireless LAN Outdoor Bridge z RF cable z AC Power cable cluded with the Outdoor Bridge will cause damage and void the warranty for this pro duct. Hardware Setup Ethernet & RS-232 Console Connect.
PSE BOX : for Power Over Ethernet (POE) PSE BOX A C Pow er cab le Power Over Ethernet : RJ-45 cable connecter PSE BOX (POWER &DA T A OU T port) and Wireless-G Outdoor Bridge W AN or LAN E t h e rn.
Minimum System Requirements z Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet Adapter z Internet Explorer version 6.0 or Netscape Navigator version 7.0 and Introduction The SP915G Outdoor Bridge covers a long operating distance, providing an 802.
Features and Benefits z Support IEEE 802.1 1b and 802.1 1g wireless standards Provide dual radio to bridge wireles z s networks nd r transmit power thernet fo r deployment flexibility Compliant with IEEE 802.
Repeater Mode oint Mode Repeater Mode Point to P Access Point Repeater1 Repeater2 Wireless C lie nt Point to Point (P2P : W ireless Bridge) Mode L2 Switch L2 Switch P2P-1 P2P-2 LAN1 LAN2 W ired Networ.
Point to Multi Point Mode Using the Configuration Menu To configure the OUTDOOR BRIDGE, use a computer which is connected to the OUTDOOR BRIDGE with an Ethernet cable (see the Network Layout diagram). First, disable the Access the Internet using a proxy server function.
A asswo default user name is “ admin ”, the default p assword is “ default ” screen will pop up and request you to enter user name and p rd. The After the connection is established, y ou will see the user identification window s shown. d to the dress.
11.
Device IP Setting Æ Ethernet LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LA N interface for the OUTDOOR BRIDGE. These settings may be referred to as private settings. You may change the LAN IP address if needed.
AP Setting --> Wireless0 or Wireless1 13.
14.
Mode: AP/Bridge or Disable Wireless. Sele ct AP/Bridge if you want to set wireless in AP mode. Speed: The speed are Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps,11Mbps, 12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps.
the devices in your network when using the 802.1x feature. WPA (Wi-Fi Protected Access) authorizes and identifies users based on a ral key every 10,000 ackets (a packet is a kind of message transmitted over a network.
password 26 bit HEX code.( Note : Currently version do es not support ASIC ode.) icate twork. EP mode: Select 64, 128 bits. ct dis then select WPA and check PA-PSK rk. nterprise(802.1x) to the authentication nction of the RADIUS server. he RADIUS server and port number edicated to RADIUS accounting.
to restore previous value. To make settings working click Submit -> Reset -> Restart .) 0 or Wireless1 on only WEP encryption ethod can select. When wireless0 or wir eless1 in PtP mode will also do AP en SSID and set WEP encryption. .03.04. 05 Wireless1 Mac: 00.
Wireless1.Set WEP encryption the same as P2P-1 Wireless1.Dsiable P2P-2 Wireless1 WP A encryption. Pull down select “ y ” in hidden SSID to disable SID broadcast. Point to Multi Point Mode Setting Æ Wireless0 or Wireless1 mode setting is like AP mode setting, but encryption only WEP l 3.
00.01.02.03.04.08 and P2P-2 Wireless1 Mac: 00.01.02.03.04.0A in WDS macs fields. Then set WEP encryption, and disable WP A encryption. Pull down select “ y ” in idden SSID to disable SSID broadcast. et P2P-1 Wireless1 in AP/Bridege Mode, and type PMP Wireless1 Mac: 0.
Repeater Mode Setting Æ Wireless0 or Wireless1 Repeater Mode Access Point Repeater1 Repeater2 Wireless C lie nt epeater mode setting is like AP mode setting, but encryption only WEP ncryption method can select. .g AP Wireless0 Mac: 00.01.02.03.04. 05 Wireless1 Mac: 00.
Mac: 00.01.02.03.04.08 in WDS macs fi elds. Then set channel the same Repeater1 Wireless1.Set WEP encryption the same as AP Wireless1.Ds as iable Repeater2 Wireless0 W Dual Radio Setting For Simultaneous Operation AP and Bridge e.
DHCP Server Setting Æ DHCP 23.
D dy HCP Server Control: Dynamic Host Configuration Protocol assigns namic IP addresses to devices on the network. This protocol simplifies eive IP new IP addresses. Select Subnet on device IP(Such as 192.168.2.254) to allow the OUTDOOR BRIDGE to function as a DHCP server.
WAN Setting Æ WAN 25.
T o select the connection type for W AN PORT , you can choose any of the ask, IP L and using PPPoE to connect to Internet, please click PPPo E and type username and password. For Disable WAN Port, please click Disable. ote: If you change any item, click “submit ” to store the value.
connect your ISP at PPPoE setting. Admin setting Æ Admin 27.
You can change login password (default password is “ d name and password, and SNMP Trap setting here. efault ”), SNMP user (Note: If you change any item, click “submit ” to store the value. Or click “clear” to restore previous value. To make settings working click Submit -> Reset -> Restart .
Firewall setting Æ Firewall 29.
In Firewall IP Rules fields you can define 20 IP rules to deny or pass etworking which fit the rules. Firewall MAC Rules fields you can control 20 MACs which can pass connect system or deny from system. ote: If you change any item, click “submit ” to store the value.
Virtual Server setting Æ Virtual Server You can define 10 groups Virtual Server here. e.g. If you build a Server at local PC(client) and Wireless-G Outdoor AP/Bridge is connect to internet have a real IP.
Connection Status It will show the device connection status. 32.
Firmware upgrade Æ Upgrade S tep 1 : Set your PC IP (192.168.2.X), and close PC’s firewall. plete. S tep 2 : Open a TFTP server on your PC and put the firmware in the same direct. S tep 3 : Click on the Upgrade tab and then the main screen enter the PC IP address in the “tf tp server :”field se ction 192.
Reset System Æ Reset Click Reset Æ Restart will store settings and restart system. 34.
S pecifications St andards Ethernet: IEEE 802.3 / IEEE 802.3u Wireless: IEEE802.1 1 b /g compliant Dat a Rate 54/48/36/24/18/12/1 1/5.5/2/1Mbps auto fallback Security 64/128-bit WEP Data Encryption, WP A, 802.1x and Access Control List Frequency Band 2.
Een belangrijk punt na aankoop van elk apparaat MicroNet Technology SP915G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen MicroNet Technology SP915G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens MicroNet Technology SP915G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding MicroNet Technology SP915G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over MicroNet Technology SP915G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van MicroNet Technology SP915G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de MicroNet Technology SP915G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met MicroNet Technology SP915G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
