Gebruiksaanwijzing /service van het product SP5100/S van de fabrikant Microsoft
Ga naar pagina of 56
User ’ s Manual Internet IP T elephone Model No.: SP5100/S Website: http://www .micronet.info.
T able of Content s 1. OVERVIEW OF THE IP PHONE .............................................................................................................. 3 1.1. H ARDW ARE O VERVIEW ................................................................
4.14. [ SECURITY ] COMMAND ....................................................................................................................... 45 4.15. [ VOICE ] COMMAND .............................................................................
1. Overview of the IP Phone IP-Phone is a full-featured IP-based telephone se t via Ethernet base communication. Over the office LAN connection, it provides IP-PBX so lution such as st ation-to-station call, IP call and local PSTN/PBX Extension call via PSTN Gateway .
1.1. Hardware Overview Front V iew and Keypad function ● LCD : 2 lines, 24 character Dot Matrix display . ● C : Jump out current LCD menu. ● Í : Move to previous selection or clear previous data. ● Î : Move to right or next selection. ● OK : Press OK to confi rm the modification.
3 “D” ; “E” ; “F” ; “3” 4 “G” ; “H” ; “I” ; “4” 5 “J” ; “K” ; “L” ; “5” 6 “M” ; “N” ; “O” ; “6” 7 “P” ; “Q” ; “R” ; “S” ; “7” 8 “T” ; “U” ; “V” ; “8” 9 “W” ; “X” ; “Y” ; “Z” ; “9” * “.
side. ● HOLD : T o hold a call, after press HOLD bu tton, both sides will hear hold tone. ● SPEED : 1. Press SPEED and number (Phone book in dex) after of f-hook can do speed dial according to phone book data (please refer to 3.LCD configuration - 6.
Note: All function keys mentioned above (except diali ng keyp ad) are effective only in IP Phone mode. Back View n DC 9V : DC 9V power input outlet o LAN : RJ-45 connector , connected directly to the Hub through the straight CA T -5 cable.
Ethernet connector （ LAN ） RJ-1 1connector ： RJ-1 1 connector is for connecting IP-Phone with PSTN. RJ1 1connector 8.
1.2. Sof tware Features and Specification Application: ● ISP/ITSP (Internet T elephony Ser vice Provider) ● IP-PBX with office telephony services ● Multi-nation enter prise communication ● SOH.
Provisioning and Configuration ● SIP (RFC3261) compliance ● LCD configuration password protection ● Provide Proxy Mode or Peer-to-Peer Mode (Non Proxy Server needed) selection ● Ring tone, S p.
1.3. Physical specification & Environment Dimension: 215mm(W) x 71mm(H) x 198mm(D) We ight: 834 grams (unit) Power Suppl y: DC 9V output adaptor , AC 120V ac input Operation Environment: Humidity:.
2. Configuring the IP-Phone - LCD Menus Note: 1. Af ter any configuration is made for the IP-Phone , user has to do Reboot in the selection 7 “Reboot”. 2. We suggest user to set IP address via LCD menu 5 → 2.3.4.5 first, then go to chapter 3 to do other det ail co nfigurations via web browser .
notice that user must plug PSTN line in RJ-1 1 port when IP-Phone is in PSTN mode. (**) IP-Phone PSTN 10:10:10 AM Press Í or Î to enter configuration mode then press OK button to enter sub menus; press C can jump out current menu to previous level. 1.
2.2. LCD Menu Configuration User can set the following conf igurations by LCD keypad. Note: 1. Press TRANSFER before input data can switch characters to be capit al or lowercase.
Enter a forwarded phone number to acti vate no response forward function. B. Deactivate Deactivate No Response Forward function. 3. Unconditional It is included the above two types. Whether t he IP-Phone is in which status, calls will be automatically forwarded to the assigned phone number .
5. Network 1. Information User can press Í or Î to check current network st atus: ● Mode: Display current network c onnection mode of IP-Phone to be S tatic (Fixed IP), DHCP , or PPPoE.
IP-Phone will keep trying to connect. On the other hand, if user disables this function, IP-Phone won’t reboot and keep trying to connect. 8. SNTP Configuration (1) SNTP Mode: User can set SNTP function to be on or off, which means IP-Phone will capture current time from SNTP server or not.
2. Proxy ● Proxy Set Proxy IP address or Domain Name. ● Outbound proxy Set Outbound Proxy IP address or Domain Name. ● Proxy port Set Proxy port for IP-Phone to send messages. ● Expire (in seconds) Set expire time of registra tion, in the duration of 2/ 3 expire time, IP-Phone will re-register to Pr oxy Server again.
User has to input user name for FTP serv er login .It is necessary for upgrading IP-Phone new application rom file via FTP method. 4. FTP Password User has to input password for FT P server login .It is necessary for upgrading IP-Phone new application rom file via FTP method.
3. Configuring the IP-Phone through Web Pages The HTTPD web management interf ace provides user an easier way to configure rather than command line method through TELNET . The configuration function and steps are similar with the way through command line.
Note: User can set password later in 8.P ASSWORD via web interface. Step 3. Enter the w eb interface main screen After enter login name and p assw ord, user can see web interface main screen as below .
Step 4. S t art to configure Most important items are Network Interf ace, SIP Information, and Phone Book (in Peer-to-Peer mode). Please reme mber to configure these commands before start to wo rk with IP-Phone. Note: After change any settings, please remember to reboot (in Reboot System) IP-Phone so that changes can take ef fect.
3.1. Network Interface Please refer to chapter 4.7 [ifaddr] command. IP Address: Set IP Address of IP-Phone Subnet Mask: Set the Subnet Mask of IP-Phone Default routing gateway: Set Defa ult routing gateway of IP-Phone Get IP Mode: User has to set IP-Phone to use which network mode.
24.
SNTP: Enable / Disable the Simple Network T ime Protocol function SNTP Server Address: Set SNTP Server Address When SNTP server is availabl e, enable IP-Phone SNTP function to point to SNTP server IP address so that IP-Phone can get correct current time.
3.2. SIP Information Please refer to chapter 4.13 [SIP] command Run Mode: Select IP-Phone to work under Peer-to-Peer mode or Proxy mode. Proxy IP Address: Set Proxy IP Address or URL address (Domain Name Server must be configured. Please refer to Network Interface).
Line Account: set user name of IP-Phone for registering. Us er can set user name and password for registering. If p assword is no need, please set user name the same as line number or IP-Phone won’t register successfully . Line Password: set password for registering.
3.3. System Configuration Please refer to chapter 4.12 [sysconf] command Keypad DTMF T ype: set DTMF type. User can select DTMF type IP-Phone transmit s. RFC2833 Payload T ype: change RFC2833 Payload type. This is for special request from the other site, if RFC2833 p ayload types of 2 si tes are different, it may cause some problem of connection.
3.4. PPPoE Configure Please refer to chapter 4.1 1[pppoe] command User Name: Set PPPoE authentication User Name. Password: Set PPPoE authentication password.
3.5. V oice Setting Please refer to chapter 4.15 [voice] command Codec Priority: set codecs priority in order . Please notice that user can set from 1 to 5 codecs as their need. For example, user can onl y set first priority as G . 723.1, and set the others as x, that means onl y G .
3.6. Phone Book Please refer to chapter 4.10 [pbook] command Add Data: User can specify 20 set s of phone book via web interface. Please input index, Name, IP Address and E.164 number of the destination device. Delete Date: User can delete any configured phone book data by index.
3.7. DSCP Configure Please refer to chapter 4.16 [tos] command Set Signal or R TP Packet DSCP value: Assured Forwarding (AF) PHB: Select Delay priority and Drop Precedence Expedited Forwarding (EF) PHB: Select T O S value as EF Default: Select T OS value as 0 User Assign S pecial DSCP Code: User can set other unspecified value here.
DROP Precedence Class #1 Class #2 Class #3 Class #4 Low Drop Precedence (AF1 1) 001010 (AF21) 010010 (AF31) 01 1010 (AF41) 100010 Medium Drop Precedence (AF12) 001 100 (AF22) 010100 (AF32) 01 1 100 (A.
3.8. Password Please refer to chapter 4.19 [password] command Change: First select login name as root or administrator , then enter current password, new password and confirm new p asswor d again to set new password. Abort: Press abort will clean all inputs.
3.9. Rom Configuration Please refer to chapt er 4.18 [rom] command FTP/TFTP Server IP Address: Set TFTP server IP address T arget File name: Set file name prepared to upgrade Method: Select download m.
3.10. Flash Clean Please refer to 4.5 [flash] command. Press CLEAN will clean all conf igurations of IP-Phone and reset to factory default value. Note: User must re-configure all commands a ll over ag.
3.11. Reboot System Press reboot will reset IP-Phone. Note: T o execute reboot via web browser , IP-Phone will automatically save all data before reboot.
4. Configuring the IP-Phone T elnet command lines After setting the IP Address of IP-Phone and reboot, (please refer to LCD Menu: 5-3.4.5), user can enter into T elnet command lines. Note: ● Af ter user enter IP-Phone configuration via telnet, please use login: ”root”, password: null, press enter to enter command lines.
4.3. [debug] command This command is for engineers to debug syst em of IP-Phone. User can add debug flag via command debug –add “ debug flags ”, and then start debug function via command debug –open . When IP-Phone is working on screen will display related debug messages.
4.6. [commit] command Save any changes after configuring the IP-Phone . 4.7. [ifaddr] command Configure and display the IP-Phone IP information. ● –print : print out all current confi gurations of ifaddr command. ● -ip, -mask, -gate : Set IP-Phone IP Address, subnet mask and default gateway respectively .
● -ip sharing : If IP-Phone is behind a IP-shari ng , user must enable IP sharing function and specify public IP address.( ifaddr –ip sharing 0 / 1 “ public IP address of IP sharing ” , 0 for .
Usage: ping “IP address” The message will display packet s transmitting condition or no answer from the IP address. 4.10. [pbook] command This command is functional both in Proxy m ode and Peer-to-Peer m ode. In proxy mode, use speed dial or 10 DL button will dial out e.
4.11. [pppoe] command ● -print : display all current configurations and information. ● –id : to set PPPoE authentication user name. ● –pwd : to set PPPoE authentication password.
4.12. [sysconf] command ● -print : display all current configurations. ● -id time : set the duration(in second) of two pressed digits in dial mode as timed out. If after the duration user hasn’t pressed next number , IP-Phone will dial out all number pressed.
packet s form IP-Phone will be sent to outbound proxy server . ● –prefix : set prefix string. If user ID cont ains alphabets, us er can set it as prefix string here.
password for registering. If p assword is no need, please set user name the same as line number or IP-Phone won’t register successfully . ● –pwd : set account password for registering. 4.15. [voice] command The voice command is associated with the voice codec setting information.
distributor before changing any settings of this command. 4.16. [tos] command TOS/Dif fServ (DS) priority function can discrim inate the Differentiat ed Service Code Point (DSCP) of the DS field in the IP packet header , and map each Code Point to a corresponding egress traffic priori ty .
01 1 100 ====> 28 (Decimal System) 100100 ====> 36 (Decimal System) 001 1 10 ====> 14 (Decimal System) 0101 10 ====> 22 (Decimal System) 01 1 1 10 ====> 30 (Decimal System) 1001 10 ====.
4.17. [bureau] command ● -print : show all current configurations. ● -hotline : set hotline table. User can set hotli ne function to specify one IP address for IP-Phone to dial out directly . Once us er picks up IP-Phone, it will automatically dial out to the assigned IP address and number .
● -f : the file name prepared for upgr ading is necessary as well. ● –method : specify download method to be TFTP or FTP(0 for TFTP .1 for FTP) ● –f tp : specify user name and password for FTP download method. For example: User prepares to upgrade t he latest app rom file – siplp.
password: ”press enter”. User who requests authorization to execute a ll configuration commands needs to login with “root”. If a user login wit h “administrator”, two commands are not functional: password –set root: set p assword of login : “root”.
5. Upgrading Sof tware on the IP-Phone IP-Phone supports three methods to upgrade the new version. All methods are necessary to prepare the TFTP or FTP pr ogram on the host PC as TFTP/FTP server . After installing TFTP/FTP program on one PC and connecting to network, IP-Phone is ready to be upgraded.
5.2. W eb Management Please refer to chapt er 4.18 [rom] command 7. FTP/TFTP Server IP Address: Set TFTP serv er IP address 8. T arget File name: Set file name prepared to upgrade 9. Method: Select download method as TFTP or FTP 10. FTP Login: Set FTP login name and password 11.
5.3. Remote Control: T elnet Please refer to chapt er 4.18 [rom] command 1. -print : show all current configurations and version information. 2. -app,-boot, -dsptest, -dspcore, -dspapp : upgrade main boot code, main application code, DSP testing code, DSP kernel c ode, DSP applic ation code, Ring Back T one PCM file and Hold T one .
55.
Een belangrijk punt na aankoop van elk apparaat Microsoft SP5100/S (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Microsoft SP5100/S heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Microsoft SP5100/S vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Microsoft SP5100/S leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Microsoft SP5100/S krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Microsoft SP5100/S bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Microsoft SP5100/S kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Microsoft SP5100/S . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
