Gebruiksaanwijzing /service van het product 09 845 470 van de fabrikant Miele
Ga naar pagina of 112
Oper ating instructions for washing machines T o avoid the risk of accidents or damage to the machine, it is essential to r ead these instructions before it is installed and used for the first time.
Contents 2 Caring for the environment ................................................................................... 6 Warning and Safety instructions ......................................................................... 7 Operating the washing machine .
Contents 3 Delay start ............................................................................................................. 41 T o select delay start ............................................................................................
Contents 4 Dispensing aids ...................................................................................................... 65 F abric conditioner and liquid starch ...................................................................... 65 Miele recommended det ergents .
Contents 5 The water pr otection system ................................................................................. 93 Connection to the water supply ............................................................................. 95 Connection to the dr ainage system .
Caring for the envir onment 6 Disposal of the packing mate‐ rial The packaging is designed to pr otect the washing machine from damage dur‐ ing transportation. The packaging ma‐ terials used ar e selected from mat erials which are envir onmentally friendly for disposal and should be recycled.
W arning and Safety instructions 7 This washing machine complies with current safety r equirements. Inappropriat e use can, however , lead to personal injury and dam‐ age to pr operty . T o avoid the risk of accidents and damage t o the machine, please read these instructions car efully before using it for the first time.
W arning and Safety instructions 8 Safety with children Children under 8 years of age must be k ept away from the wash‐ ing machine unless they are constantly supervised.
W arning and Safety instructions 9 The electrical safety of this washing machine can only be guar an‐ teed when corr ectly earthed. It is essential that this standard safety r equirement is met. If in any doubt, please have the wiring system of the building t ested by a qualified electrician.
W arning and Safety instructions 10 The machine must be isolated fr om the electricity supply when cleaning and maintaining the machine and in the event of a fault.
W arning and Safety instructions 11 Correct use Do not install the washing machine in a room wher e there is a risk of frost. F ro zen hoses may burst or split. The reliability of the elec‐ tronic contr ol unit may be impaired at t emperatur es below freezing point.
W arning and Safety instructions 12 T ake care when opening the drum door after using the st eam function. Danger of burning due to escaping st eam and the high temper ature of the surface of the drum as well as the porthole glass. Stand back away fr om the machine and wait until the steam has dis‐ sipated.
W arning and Safety instructions 13 Colour run and dye removers contain sulphur compounds which can cause damage such as corrosion. Do not use these pr oducts in this machine. If deter gent comes into contact with the eyes, rinse them thor‐ oughly with lukewarm water immediat ely .
Operating the washing machine 14 Control panel a Display with sensors See the next page for mor e informa‐ tion. b Start/Stop button F or star ting the progr amme selected and cancelling a progr amme once it has started. c T emperatur e button F or selecting the temperatur e.
Operating the washing machine 15 j sensor Scrolls down the list t o the next op‐ tion or decreases a value. k OK button Confirms the progr amme selected, a value set or opens a sub-menu. l sensor Scrolls up the list t o the next option or increases a value.
Operating the washing machine 16 Standard display Cottons 10:30 1600 rpm Duration 2:59 h The standard display shows the follow‐ ing from left t o right: – the progr amme selected – the time .
Before using for the first time 17 Before using the machine for the first time ensure that it is corr ectly in‐ stalled and connected. See "Installa‐ tion and connection". Also check that the drain filt ers are secur ely tightened to pr event the risk of water leaks during use.
Before using for the first time 18 This washing machine has undergone a complete functional test at the fac‐ tory and there will be some r esidual water in the drum fr om this process. F or safety reasons, spinning is not pos‐ sible until the machine has been pre‐ pared for using for the first time.
Before using for the first time 19 Messages T wo messages about removing the transit bars and preparing the washing machine for use will appear in the dis‐ play . Confirm the messages with the OK sensor . Running the first progr amme The T winDos unit needs to be activa‐ ted befor e running the first pro‐ gramme.
T winDos 20 The washing machine has an integr ated deter gent dispensing unit. The deter gent dispensing unit can be used with 1. the Miele 2 Phase System or 2. any other liquid detergent and/or fab‐ ric conditioner The Miele 2 Phase System The Miele 2 Phase System uses a base deter gent (UltraPhase 1) and a deter‐ gent enhancer (UltraPhase 2).
T winDos 21 Inserting cartridges/containers Keep filled containers or car‐ tridges out of the reach of childr en. Observe the instructions for use and warning instructions given by the de‐ ter gent manufacturer . Pr ess the T winDos container access panel.
T winDos 22 Push the Ultr aPhase 1 cartridge into Compartment 1 until it locks into po‐ sition. Remove container 2 and push the UltraPhase 2 cartridge into Com‐ partment 2 until it locks into position. Keep the containers in a safe place. They can be used for other types of deter gent.
T winDos 23 Open the Settings menu Y ou have to ent er the type of deter‐ gent being used in the Settings menu. Switch on the washing machine and wait until the standard display lights up.
T winDos 24 Dosage amount 60 ml Normally soiled Tip: If you live in an area with water hardness levels I ( ) or III ( ), adjust the dosage for Miele products accor d‐ ing to the information given on the packaging. Use the OK sensor to confirm the dosage amount or use the and sensors to change the amount.
T winDos 25 Running the first progr amme The T winDos system needs to be primed before you can use the wash‐ ing machine. T o do this you must run a wash pro‐ gramme without laun dr y . Open the stopcock. T urn the progr amme selector to Cot‐ tons .
W ashing environmentally and economically 26 Energy and water consumption – Wat er consumption and energy us‐ age are det ermined by the size of the load. T o make the most of your machine, load the maximum dry load for the progr amme you are using.
W ashing environmentally and economically 27 EcoF eedback Y ou can call up information about the energy and wat er consumption of your washing machine with the EcoF eed‐ back sensor . The following information will appear in the display: – an estimate of the consumption be‐ fore the pr ogramme begins.
1. Pr epare the laundry 28 Empty all pockets. F oreign objects (e.g. nails, coins, paper clips, etc.) can cause damage to garments and to components in the machine. Sort the laundry Sort the laundry by colour and by care label. Most garments have a t ex‐ tile care label in the collar or side seam.
2. Select a progr amme 29 Switch on the washing ma‐ chine Pr ess the button. The interior drum lighting will come on. The drum lighting will go out automati‐ cally after five minutes. P ress the Start/Stop b utton to switch the drum lighting back on again.
3. L oad the washing machine 30 Open the door Reach under the door grip and pull the door open. Unfold the laundry and load loosely into the drum. Mixing both large and small it ems gives better wash r esults and also helps distribute the load evenly during spinning.
4. Select progr amme settings 31 Degree of soiling Lightly soiled No visible dirt or stains. P ossibly slight body odour . Normally soiled Visibly dirty and/or just a few slight stains.
4. Select progr amme settings 32 Selecting a spin speed Y ou can alter the pr e-set spin speed of a wash progr amme. Pr ess the Spin speed button. The following will appear in the display: Spin speed 1600 rpm rpm ) (0-1600 Set the spin speed you want with the and sensors and confirm your selection with the OK sensor .
5. Add detergent 33 There ar e several options for adding de‐ ter gent. T winDos Depending on which agents have been added in Compartments 1 and 2: Miele 2 Phase System The optimum amount of UltraPhase1 and UltraPhase2 will be dispensed au‐ tomatically accor ding to the colour mix of the load.
5. Add detergent 34 Detergent dispenser dr awer T oo little deter gent results in: – Laundry not getting properly clean and with time it may become grey and hard t o the touch. – Greasy particles clinging to laundry . – Limescale deposits on the heater ele‐ ments.
5. Add detergent 35 CapDosing Three differ ent types of capsule are available: = F abric care (e.g. fabric condi‐ tioner , proofing agent) = Additives (e.g. det ergent en‐ hancers) = Det ergent (for the main wash only) Each capsule contains the correct amount for one wash cycle.
5. Add detergent 36 Close the lid and press it firmly shut. Close the deter gent dispenser draw‐ er . The capsule is opened by the act of inserting it in the detergent dispenser drawer . The contents can run out of the capsule if you then remove it from the dr awer before it is used.
6. Start the progr amme - the end of a programme 37 Start the progr amme Pr ess the flashing Start/Stop butt on. The door will lock (the will appear in the display to show this) and the pr o‐ gramme will start. If a delay start time has been selected, then this will count down in the display .
6. Start the progr amme - the end of a programme 38 At the end of a pr ogramme The door is still locked during the anti- crease phase and the following will ap‐ pear alternately in the display: Cottons 10:30 1600 rpm Anti-crease and Press the Start/Stop button, then unload the drum Pr ess the Start/Stop butt on.
Spinning 39 Final spin speed Progr amme rpm Cottons 1600 Minimum iron 1200 Delicates 900 Woollens 1200* Denim 900 Shirts 900 Automatic plus 1400 F reshen up – Dark garments 1200 Down duvets 1200.
Spinning 40 T o omit the final spin (Rinse hold) Use the F urther options button to se‐ lect the Rinse hold setting. The laundry is not spun after the final rinse and remains in the final rinse wat er . This helps prevent cr easing if the laundry is not going to be r emoved from the drum immediately after the end of the progr amme.
Delay start 41 With delay start you can choose when you want the progr amme to start. Y ou can delay the start of the progr amme from 15 minut es up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rat es, for example.
Delay start 42 T o cancel delay start and begin the progr amme straight away Pr ess the Delay start button. Finish at Change the time Start immediately Back T ouch the sensor . Start immediately will be highlighted in white. T ouch the OK sensor .
Pr ogramme chart 43 Cottons cold to 90°C Max. load 9.0 kg Use for Cotton, linen or cotton mix fabric, e.g. table linen, t owelling, under‐ wear , T -shirts etc.
Pr ogramme chart 44 Delicates cold to 60°C Max. load 3.0 kg Use for Delicate garments made fr om synthetic fibre, mixed fibr e, rayon and viscose. Note – Deselect the spin for items which cr ease easily . W oollens cold to 40°C Max. load 2.0 kg Use for Machine-washable or hand-washable wool or wool blend fabric.
Pr ogramme chart 45 F reshen up Max. load 1.0 kg Use for Dry, clean cotton, linen or mixed fibr e garments which are slightly creased. The garments must be suitable for drying in a tumble dryer and suitable for ironing . Notes – Smaller loads give a better r esult.
Pr ogramme chart 46 Outerwear cold to 40°C Max. load 2.5 kg Use for P erformance outerwear (e.g. jackets and trousers) made fr om mem‐ brane fabric such as Gor e- T ex®, S YMP A TEX®, WINDST OPPER® etc. Notes – Zip up or close jackets before washing.
Pr ogramme chart 47 Silks cold to 30°C Max. load 1.0 kg Use for Silks and other handwashable fabric with no wool content. Note Place tights, bras etc. in a laundry bag. Sportswear cold to 60°C Max. load 3.0 kg Use for Sportswear such as singlets and leggings as well as microfibr e and fleece garments.
Pr ogramme chart 48 Pillows cold to 60°C 2 pillows (40 x 80 cm) or 1 pillow (80 x 80 cm) Use for Synthetic filled washable pillows. Note – Remove air from the pillow befor e washing to prevent an e xces‐ sive build-up of foam.
Pr ogramme chart 49 Mixed items – Use for A load consisting of various items with differ ent garment care labels which is too small for a standar d progr amme. Y ou can choose fr om a list of 19 different items. Note The washing machine automatically adjusts the wash pr ocess to suit the laundry mix.
F avourites 50 Y ou can save your own customised wash progr ammes under names of your choice. The saved favourite pr ogrammes will be sorted alphabetically . T o create a favourite pro‐ gramme There ar e two ways of creating a fa‐ vourite pr ogramme.
F avourites 51 Option 2 Y ou can save a progr amme which h as been selected and started as a F avour‐ ite pr ogramme. After the pr ogramme has started suc‐ cessfully, press the Start/S top .
F avourites 52 T o save a name Save name Michael 1 1 2 3 4 5 Scroll thr ough the list of characters with the and sensors until the symbol is highlighted in white. Con‐ firm the charact er with the OK sen‐ sor .
Mixed items 53 Compiling the list of items Use this progr amme if you do not have enough laundry to run a standard pr o‐ gramme but you want t o wash a few lightly soiled items with differ ent gar‐ ment care instructions. The washing machine will use the list of items to select the most suitable pr o‐ gramme aut omatically .
Options 54 Options are select ed and deselected via the relevant butt ons and the display . Pr ess the button for the option you want. The relevant butt on will light up. Not all options are suitable for use with every progr amme. Y ou can only select options which are compatible with the progr amme being used.
Options 55 Steam smoothing Steam is inject ed into the drum at the end of the wash process. Reducing the maximum load by 50% will give a bet‐ ter r esult. F or steam smoothing to work properly ther e needs to be a certain amount of residual moistur e still present in the laundry and so the final spin speed is adjusted accor dingly .
Options 56 W ash programme chart - P rogrammeManager Pr ogrammeManager cannot be select ed with programmes which ar e not listed in the chart below. Int ensive ECO Extra gentle Extra quiet Allergo‐ .
Options 57 W ash programme chart - Options None of the options can be selected with pr ogrammes which ar e not listed in the chart below. Steam smooth‐ ing Short Stains Cottons XXX Minimum iron XXX .
Options 58 W ash programme chart - F urther options None of the options can be selected with pr ogrammes which ar e not listed in the chart below. Soak Wat er plus P re-wash Extr a rinse Rinse hold Co.
Garment care label symbols 59 Washing The figure quot ed in the bucket is the maximum temper ature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted.
Pr ogramme sequence 60 Main wash Rinses Spinning Wat er level Wash rhythm Wat er level Rinses Cottons 2-5 1)2)3) Minimum iron 2-4 2)3) Delicates 2-4 2)3) .
Pr ogramme sequence 61 = L ow water level = Medium wat er level = High wat er level = Int ensive rhythm = Normal rhythm = Sensitive rhythm = Ultr a sensitive rhythm = Handwash rhythm = C arried out – = Not carried out The washing machine has fully elec‐ tronic contr ols with automatic load rec‐ ognition.
Changing the progr amme sequence 62 Cancelling a pro gramme Y ou can cancel a pr ogramme at any time after it has started: Pr ess the Start/Stop butt on. The following will appear in the display: Selection Cancel programme Add laundry Activate safety lock T ouch the OK sensor .
Changing the progr amme sequence 63 Adding or removing laundry af‐ ter the progr amme has started Pr ess the Start/Stop butt on. The following will appear in the display: Selection Cancel pr.
Changing the progr amme sequence 64 Safety lock The safety lock prevents the t empera‐ ture, spin speed or options being al‐ ter ed during a wash progr amme.
Detergent 65 The correct detergent All deter gents produced for automatic washing machines are suitable. F ollow the manufacturer's instructions and dosage recommendations on the pack‐ aging.
Detergent 66 Miele recommended deter gents Miele deter gents and care products have been specially designed for Miele wash‐ ing machines. They are available t o order via the internet at www.
Detergent 67 Recommended detergents in accor dance with Directive (EU) Nr . 1015/ 2010 The recommendations apply t o the temperatur e ranges given in the P rogr amme chart.
Detergent 68 F abric conditioner and liquid starch at the end of the pro‐ gramme Y ou can dispense fabric conditioner ei‐ ther by using automatic dispensing or via the deter gent dispenser compart‐ ment. Automatic dispensing One of the automatic dispensing con‐ tainers must be filled with fabric condi‐ tioner .
Detergent 69 Colour run and dye removers/dyes Do not use colour run or dye re‐ movers in this washing machine. They can cause corrosion in the ma‐ chine.
Cleaning and care 70 Cleaning the drum (Hygiene info) Washing at low t emperatures and/or using liquid deter gent can cause bacte‐ ria and unpleasant odours to build up in the washing machine. Use the Mainte‐ nance wash progr amme to clean the machine.
Cleaning and care 71 Cleaning the siphon tube and the channel Clean the siphon. 1. Remove the siphon from the com‐ partment and rinse under hot running water . Clean the siphon tube at the same time. 2. Replace the siphon. Clean the fabric conditioner channel with a brush and hot water .
Cleaning and care 72 Cleaning the T winDos system The washing machine has a cleaning progr amme for cleaning the T win Dos system containers and the hoses in‐ side the washing machine.
Cleaning and care 73 Cleaning the water inlet filter The washing machine has a filter to prot ect the water inlet valve. The acces‐ sible filter in the union at the open end of the inlet hose should be checked ev‐ ery six months or so, or more often if there ar e frequent interruptions t o the water supply .
Pr oblem solving guide 74 Minor faults in the performance of the washing machine, some of which may result from incorr ect operation, can be put right without contacting the Service Depart‐ ment. The following guide may help you to find the r eason for a fault, and to correct it.
Pr oblem solving guide 75 The following fault messages appear in the display and the progr amme stops Problem Cause and remedy Drainage fault Clean the drain filter and the pump. Check the drain hose. The water outlet is block ed or restricted. The dr ain hose has been fixed too high .
Pr oblem solving guide 76 The following fault messages appear in the display at the end of the progr amme Problem Cause and remedy Intensive flow: Clean the filter and jets or remove foreign ob- jects from the pump housing.
Pr oblem solving guide 77 The following fault messages appear in the display at the end of the progr amme Problem Cause and remedy Check dosage Excessive foam ha s built up during washing. Check the amount of deter gent dispensed. With automatic deter gent dispensing check the dosage amount set.
Pr oblem solving guide 78 Pr oblems with T winDos Problem Cause and remedy No detergent and/or fabric conditioner was dispensed. Automatic dispensing has not been activated. T ouch the Dos sensor before running the ne xt progr amme. Automatic dispensing will be activated.
Pr oblem solving guide 79 General pr oblems with the washing machine Problem Cause and remedy The machine shakes during the spin cycle. The machine feet are not level. Level the machine and adjust the feet corr ectly . The laundry has not been spun properly and is still wet.
Pr oblem solving guide 80 General pr oblems with the washing machine Problem Cause and remedy At the end of the pr o‐ gramme there is still liq‐ uid in the capsule. The small pipe in the deter gent dispenser drawer onto which the capsule is placed is blocked.
Pr oblem solving guide 81 An unsatisfactory wash result Problem Cause and remedy Liquid detergent does not give the required r e‐ sult. Liquid deter gents usually contain no bleaching agents. They do not remove fruit, coffee and t ea stains. Use the Miele 2 Phase System.
Pr oblem solving guide 82 The door will not open Problem Cause and remedy The door cannot be pulled open during a programme. The drum is locked during a progr amme. Pr ess the Start/Stop butt on. Use the sensor to select Cancel programme or Add laundry .
Pr oblem solving guide 83 Opening the door in the event of a blocked dr ain outlet and/or power failure Switch off the washing machine. Pr ess the drain pump access panel. The panel will spring open. Blocked dr ain outlet If the drain outlet is block ed, a large quantity of water can r emain in the washing machine.
Pr oblem solving guide 84 Clean them thoroughly . Remove any foreign objects (e.g. but‐ tons, coins, etc.) and fluff fr om the fil‐ ter housing. T urn the impellers by hand to check that they r otate freely . Replace the drain filt ers correctly (on the right and left) and tighten them securely .
After sales service 85 Repairs In the event of any faults which you cannot remedy yourself, please con‐ tact: – your Miele Dealer , or – Miele (Contact details for Miele are given at the end of this booklet).
Installation and connection 86 F ront view a Inlet hose with Wat erproof system b Electrical supply cable c Flexible dr ain hose (with detachable swivel elbow) d Control panel e Deter gent dispenser d.
Installation and connection 87 Rear view a Drain hose b T ransport clips for electrical supply cable, inlet and drain hoses c Electrical supply cable d Pr otruding lid for holding when mov‐ ing the .
Installation and connection 88 Installation surface A concret e floor is the most suitable in‐ stallation surface for a washing ma‐ chine, being far less prone t o vibration during the spin cycle than wooden floorboards or a carpet ed surface. Please note: The machine must be level and se‐ curely positioned.
Installation and connection 89 Using the spanner supplied, turn the left-hand transit bar 90°, then pull the transit bar out. T urn the right-hand transit bar 90°, then pull the transit bar out.
Installation and connection 90 T o avoid the risk of injury, the holes for the transit bars must be covered aft er the transit bars have been removed. Plug the holes with the plastic caps as illustrat ed. Secure the tr ansit bars to the back of the washing machine.
Installation and connection 91 Levelling the machine The washing machine must stand per‐ fectly level on all four feet to ensur e safe and proper oper ation. Incorrect installation may incr ease elec‐ tricity and water consumption and may cause the machine to move about.
Installation and connection 92 Building under a continuous work‐ top/ in a kitchen run The washing machine lid cannot be removed. This washing machine (with lid intact) can be pushed under a worktop if ther e is space to do so. Washer -dryer stack The washing machine can be combined with a Miele tumble dryer in a washer- dryer stack.
Installation and connection 93 The water protection syst em The Miele water pr otection system pr o‐ tects all parts of the washing machine from wat er damage.
Installation and connection 94 The electronic unit and dr ainage and overflow protection – Drainage pr otection Any leaking water is collected in the sump in the base of the machine.
Installation and connection 95 Connection to the water sup‐ ply The casing on the water inlet hose contains electrical compo‐ nents. It must not be connected in areas wher e there is the risk of water or other liquids reaching it, e.g. bath‐ rooms.
Installation and connection 96 Maintenance Only use a Miele Wat erproof system hose should you need a replacement. Disconnect the machine from the elec‐ tricity supply before unscr ewing the wa‐ terpr oof system inlet hose from the stopcock.
Installation and connection 97 Connection to the dr ainage system The machine drains via a dr ain pump with a delivery head of 1 metre*. The drain hose must not be kink ed as this restricts dr ainage. The swivel elbow at the end of the hose can be turned in ei‐ ther direction, or can be detached if r e‐ quired, with a sharp twist and pull.
Installation and connection 98 Electrical connection U .K. All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with cur‐ rent national and local safety r egula‐ tions (BS 7671 in the UK).
T echnical data 99 Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 850 mm Width for building under 600 mm Weight Appro x.
Consumption data 100 Load Consumption data Energy in kWh Water in l Duration Residual moisture Cottons 90°C 9.0 kg 2.4 65 2 h 29 min 50% 60°C 9.0 kg 1.45 65 1 h 59 min 50% 60°C 4.5 kg 1.10 52 1 h 59 min 50% * 9.0 kg 0.90 55 2 h 59 min 44% * 4.
Consumption data 101 Note for test institutes * T est progr amme in accordance with EN 60456 and ener gy label with Directive 1061/2010 Consumption data can vary from the nominal values given dependin.
Settings 102 Y ou can use the settings menu to alt er the machine's electronics t o suit changing requir ements. Settings can be alter ed at any time. Opening the Settings menu Before you begin, ensur e that: – The washing machine is switched on.
Settings 103 Language The display can be set to appear in one of several differ ent languages. The flag after the wor d Language acts as a guide to pr event a language which will not be understood fr om be‐ ing set. The selected language will be stor ed in memory .
Settings 104 Buzzer volume Y ou can select one of seven differ ent settings for the buzzer volume. The settings are r epresented by a bar chart. At the lowest setting, the buzzer is switched off. K eypad tone Each touch of a sensor or pr ess of a button is confirmed with an audible tone.
Settings 105 T emperature unit The temper ature can be displayed as degrees Celsius (°C) or F ahrenheit (°F). F actory default setting: Celsius (°C). Display brightness There ar e seven different display brightness settings. The brightness changes as soon as you select a different setting.
Settings 106 Soak duration Y ou can set a dur ation for the soak process of between 30 minut es and 5 hours. Y ou can select the dur ation in 30 mi‐ nute incr ements. When the Soak option is selected the laundry will be soaked for the duration select ed.
Settings 107 Maximum rinse level The water level in the rinse cycle can be permanently set to the highest val‐ ue. This function is useful for allergy suffer‐ ers as it achieves an ex cellent rinse re‐ sult. Wat er consumption will increase. F actory default setting: the maximum rinse level setting is switched off.
Optional accessories 108 Deter gent, fabric care, additives and machine care pr oducts are available for this washing machine. All the products have been designed for Miele washing machines. These and many other useful products can be order ed via the internet at www.
Optional accessories 109 Down items – liquid deter gent suitable for pillows, sleeping bags and down filled items – retains the elasticity of down and feather filled items – retains the br eatha.
.
United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: 0330 160 6600 E-mail: mielecare@miele.co.uk Internet: www.miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive, Knoxfield, VIC 3180 Tel: 1300 464 353 Internet: www.
M.-Nr . 09 845 470 / 05 en-GB WKR 770 WPS .
Een belangrijk punt na aankoop van elk apparaat Miele 09 845 470 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Miele 09 845 470 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Miele 09 845 470 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Miele 09 845 470 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Miele 09 845 470 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Miele 09 845 470 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Miele 09 845 470 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Miele 09 845 470 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
