Gebruiksaanwijzing /service van het product 09 898 161 van de fabrikant Miele
Ga naar pagina of 96
Installation Instructions 30" Electric, 30" Induction Range 30", 36" All Gas Range 30", 36", 48" Dual F uel Range T o prevent accidents and damage t o the r ange, you must read all instructions supplied before installing or using the appliance.
IMPORT ANT SAFETY INS TRUC TIONS 2 ɘ WARNING Children and adults can tip over the r ange if has not been secured. This may lead t o fatal injuries. ʊ This r ange must be secur ed and connected using the anti-tip device accord ing to the installation instructions.
IMPORT ANT SAFETY INS TRUC TIONS 3 ɘ WARNING: If the information in this manual is not followed e xactly, a fir e or explosion may r esult causing pr operty damage, personal injury, or death. – Do not use or stor e gasoline or other combustible liquids or vapors in the vicinity of this or any other appliance.
Contents 4 IMPORT ANT SAFETY INSTRUC TIONS ................................................................. 2 IMPORT ANT SAFETY INSTRUC TIONS ................................................................. 6 Notes on installation ..................
Contents 5 Included accessories ............................................................................................. 73 Installation dimensions of locking bolt ................................................................... 74 Installing the r ange with the anti-tip device .
IMPORT ANT SAFETY INS TRUC TIONS 6 When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use of the r ange to prevent accidents and machine damage. This r ange complies with curr ent safety requir ements.
IMPORT ANT SAFETY INS TRUC TIONS 7 Use ʊ This r ange is intended for domestic use and use in other similar environments. ʊ This appliance is not intended for outdoor use. ʊ Use the r ange e xclusively under normal domestic conditions: – Use the oven for baking, roasting, br oiling, defr osting, canning and drying food.
IMPORT ANT SAFETY INS TRUC TIONS 8 Children ʊ Children must be kept away fr om the r ange unless constantly supervised. ʊ Please supervise any children in the vicinity of the r ange and do not let them play with the appliance. ʊ Burn hazard fr om impr oper use! Do not allow childr en to oper ate the oven.
IMPORT ANT SAFETY INS TRUC TIONS 9 T echnical safety ʊ Installation, repair and maint enance work should be performed by a Miele authorized service t echnician in accor dance with national and local safety regulations and the pr ovided installation instructions.
IMPORT ANT SAFETY INS TRUC TIONS 10 ʊ During installation, maintenance and r epair work, e.g. if the oven lighting is broken (see "F requently asked questions"), the r ange must be completely disconnect ed fr om the household electricity supply .
IMPORT ANT SAFETY INS TRUC TIONS 11 ʊ In order for the r ange to function properly, it r equir es an adequate supply of cool air . Ensure that the air flow is not impair ed. Also be sure that the cool air supply is not e x cessively heat ed by other heat sources (e.
IMPORT ANT SAFETY INS TRUC TIONS 12 Preparing your appliance for an e xtended vacation ʊ If you elect to turn off the wat er to your home for an e xt ended period of time, please note that this may not be enough t o r educe the risk of a leak. T o be completely safe, you must turn off the water supply to each individual appliance.
Notes on installation 13 Model numbers A list of the ovens described in these oper ating instructions can be found on the back page. Data plate The data plate is behind the t oe-kick. The toe-kick cover is attached t o the base of the r ange by magnets so it can be removed and put back again easily .
Notes on installation 14 T oe-kick and drop guard 30" and 36" range The components are locat ed in the packaging of the r ange. 48" range The components are alr eady mounted. Installation of the toe-kick The toe-kick has sheet metal lugs and magnets by means of which it can be positioned and attached to the base of the r ange.
Notes on installation 15 Assembling the grill ɘ Burn hazard! The burners must be turned off and allowed to cool complet ely . ɘ Risk of injury! The cast-iron grill is heav y . Carry the grill car efully and place it securely on a soft base so that it lies flat.
Notes on installation 16 Optional accessories All accessories and cleaning products listed in these instructions ar e designed to be used with the Miele r ange. These can be order ed fr om the Miele website (see end of this booklet for contact details).
Notes on installation 17 1 23 & Backguard ' Rear panel backguard ( Inside panel ĺ Place the backguard Ȧ face down on a soft surface to avoid scr atching. The lower edge should line up with the edge of the table, so that the backguard lies flat.
Notes on installation 18 ĺ Once the backguard is placed on the r ange push the backguard backwards. ĺ Mount the inner panel and the rear panel on the backguard using the screws pr ovided. ĺ Mount the backguard on the r ange using the screws pr ovided.
Notes on installation 19 RBS Backsplash The backsplash is intended for mounting to a Miele r ange hood. Observe the installation instructions of the Miele r ange hood. XKM 3000 W Remote Vision Depending on the model, the r ange maybe compatible with RemoteVision TM .
Notes on installation 20 Do not carry or lift the range by the oven door handle or the contr ol panel! The r ange is heavy . Due to the siz e and weight of the appliance, installation should be performed by two people. The net weight of the r ange with accessories is as follows: Model Width Net weight incl.
Notes on installation 21 Installation location This appliance is not intended for outdoor use. Ranges with a connection to the wat er supply should not be installed in rooms where ther e is a risk of fr eezing temper atur es. The floor of the space where the appliance is t o be installed must be flat, level and made of a strong, rigid mat erial.
Electric Range dimensions 22 HR 1421; HR 1622 2 1 E C C A B D 3.
Electric Range dimensions 23 HR 1421; HR 1622 P osition Dimension Description Ȧ 13" (330 mm) Maximum depth of top cabinet ȧ 18" (547 mm) Minimum distance to bott om edge of top cabinet Ȩ 35 1/2"–37" (901 - 940 mm) Distance from floor t o cooktop surface Ǟ min.
Electric Range dimensions 24 Detailed views of HR 1421 Side view of HR 1421 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.
Electric Range dimensions 25 Detailed front side view of HR 1421 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
Electric Range dimensions 26 Rear view of HR 1421 30 5/8" (778.5mm) 24 3/8" (619.9mm) E E = Electrical connection.
Electric Range dimensions 27 Detailed views of HR 1622 Side view of HR 1622 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.
Electric Range dimensions 28 Detailed front side view of HR 1622 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
Electric Range dimensions 29 Rear view of HR 1622 30 5/8" (778.5mm) 24 3/8" (619.9mm) E 5 7/8" (149mm) W 3 1/4" (81.8mm) E = Electrical connection W = Wat er connection.
All Gas Range dimensions 30 HR 1124, HR 1134, HR 1135, HR 1136 B 2 1 F D D A C E 4 3 ǟ I n case of combustible construction, an additional minimum clearance of 6" (each side) is necessary .
All Gas Range dimensions 31 HR 1124 P osition Dimension Description Ǟ min. 30" (762 mm) Width of cabinet opening ǟ 6“ + Ǟ + 6" In case of the presence of combustible mat erial an additional minimum clear ance of 6“ (each side) is necessary .
All Gas Range dimensions 32 HR 1134 P osition Dimension Description Ǟ min. 36" (914 mm) Width of cabinet opening ǟ 6“ + Ǟ + 6" In case of the presence of combustible mat erial an additional minimum clear ance of 6“ (each side) is necessary .
All Gas Range dimensions 33 HR 1135, HR 1136 P osition Dimension Description Ǟ min. 36" (914 mm) Width of cabinet opening ǟ 6“ + Ǟ + 6" In case of the presence of combustible mat erial an additional minimum clear ance of 6“ (each side) is necessary .
All Gas Range dimensions 34 Detailed views of HR 1124 Side view of HR 1124 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
All Gas Range dimensions 35 Detailed front side view of HR 1124 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions 36 Rear view of HR 1124 2 15/16" (75.4mm) 30 5/8" (778.5mm) 24 3/8" (619.9mm) G E E = Electrical connection G = Gas connection.
All Gas Range dimensions 37 Detailed views of HR 1134 Side view of HR 1134 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
All Gas Range dimensions 38 Detailed front side view of HR 1134 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions 39 Rear view of HR 1134 3 3/4" (94.5mm) 27 3/8" (696.1mm) 30 5/8" (778.5mm) G E E = Electrical connection G = Gas connection.
All Gas Range dimensions 40 Detailed views of HR 1135 Side view of HR 1135 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
All Gas Range dimensions 41 Detailed front side view of HR 1135 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions 42 Rear view of HR 1135 3 3/4" (94.5mm) 27 3/8" (696.1mm) 30 5/8" (778.5mm) G E E = Electrical connection G = Gas connection.
All Gas Range dimensions 43 Detailed views of HR 1136 Side view of HR 1136 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
All Gas Range dimensions 44 Detailed front side view of HR 1136 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
All Gas Range dimensions 45 Rear view of HR 1136 3 3/4" (94.5mm) 27 3/8" (696.1mm) 30 5/8" (778.5mm) G E E = Electrical connection G = Gas connection.
Dual F uel Range dimensions 46 HR 1924, HR 1934, HR 1935, HR 1936, HR 1954, HR 1955, HR 1956 B 2 1 F D D A C E 4 3 ǟ In case of combustible construction, an additional minimum clearance of 6" (each side) is necessary .
Dual F uel Range dimensions 47 HR 1924 P osition Dimension Description Ǟ min. 30" (762 mm) Width of cabinet opening ǟ 6“ + Ǟ + 6" In case of the presence of combustible mat erial an additional minimum clear ance of 6“ (each side) is necessary .
Dual F uel Range dimensions 48 HR 1934 P osition Dimension Description Ǟ min. 36" (914 mm) Width of cabinet opening ǟ 6“ + Ǟ + 6" In case of the presence of combustible mat erial an additional minimum clear ance of 6“ (each side) is necessary .
Dual F uel Range dimensions 49 HR 1935, HR 1936 P osition Dimension Description Ǟ min. 36" (914 mm) Width of cabinet opening ǟ 6“ + Ǟ + 6" In case of the presence of combustible mat erial an additional minimum clear ance of 6“ (each side) is necessary .
Dual F uel Range dimensions 50 HR 1954, HR 1955, HR 1956 P osition Dimension Description Ǟ min. 48" (1219 mm) Width of cabinet opening ǟ 6“ + Ǟ + 6" In case of the presence of combustible mat erial an additional minimum clear ance of 6“ (each side) is necessary .
Dual F uel Range dimensions 51 Detailed views of HR 1924 Side view of HR 1924 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
Dual F uel Range dimensions 52 Detailed front side view of HR 1924 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
Dual F uel Range dimensions 53 Rear view of HR 1924 5 15/16" (151.3mm) 5 7/8" (149mm) 2 15/16" (75.4mm) 30 5/8" (778.5mm) 24 3/8" (619.
Dual F uel Range dimensions 54 Detailed views of HR 1934 Side view of HR 1934 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
Dual F uel Range dimensions 55 Detailed front side view of HR 1934 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
Dual F uel Range dimensions 56 Rear view of HR 1934 E 3 3/4" (94.5mm) 6 1/4" (158mm) 27 3/8" (696.1mm) 6 1/16" (153.8mm) 30 5/8" (778.
Dual F uel Range dimensions 57 Detailed views of HR 1935 Side view of HR 1935 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
Dual F uel Range dimensions 58 Detailed front side view of HR 1935 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
Dual F uel Range dimensions 59 Rear view of HR 1935 E 3 3/4" (94.5mm) 6 1/4" (158mm) 27 3/8" (696.1mm) 6 1/16" (153.8mm) 30 5/8" (778.
Dual F uel Range dimensions 60 Detailed views of HR 1936 Side view of HR 1936 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
Dual F uel Range dimensions 61 Detailed front side view of HR 1936 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
Dual F uel Range dimensions 62 Rear view of HR 1936 E 3 3/4" (94.5mm) 6 1/4" (158mm) 27 3/8" (696.1mm) 6 1/16" (153.8mm) 30 5/8" (778.
Dual F uel Range dimensions 63 Detailed views of HR 1954 Side view of HR 1954 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
Dual F uel Range dimensions 64 Detailed front side view of HR 1954 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
Dual F uel Range dimensions 65 Rear view of HR 1954 31 11/16" (805mm) 5 9/16" (140.8mm) 3 3/4" (95.7mm) 23 1/4" (590.7mm) 40 7/16" (1027.
Dual F uel Range dimensions 66 Detailed views of HR 1955 Side view of HR 1955 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
Dual F uel Range dimensions 67 Detailed front side view of HR 1955 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
Dual F uel Range dimensions 68 Rear view of HR 1955 E 31 11/16" (805mm) 5 9/16" (140.8mm) 3 3/4" (95.7mm) 23 1/4" (590.7mm) 40 7/16" (1027.
Dual F uel Range dimensions 69 Detailed views of HR 1956 Side view of HR 1956 47 5/8" (1210mm) 5 9/16" (141mm) (x) 22 1/16" (561mm) 8 1/8" (207mm) 35 1/2 - 37" (901.7 - 939.8mm) 36 9/16" - 38 1/16" (928.7 - 966.8mm) 37 1/16" - 38 9/16" (941.
Dual F uel Range dimensions 70 Detailed front side view of HR 1956 1 9/16" (40mm) 2 3/8" (60mm) 1 1/4" (32mm) 8 1/8" (207mm) 9 1/4" (235mm) 10 15/16" (278mm) 1 3/4" (45mm) 2 9/16" (65.
Dual F uel Range dimensions 71 Rear view of HR 1956 E 31 11/16" (805mm) 5 9/16" (140.8mm) 3 3/4" (95.7mm) 23 1/4" (590.7mm) 40 7/16" (1027.
Anti-tip device 72 Before installation ɘ WARNING Children and adults can tip over the r ange if has not been secured. This may lead to fatal injuries. Make sure that the anti-tip device is properly installed and locked int o place. It should be screwed t o the floor or wall and engage with the center of the bott om of the range.
Anti-tip device 73 Checking the installation space Install the anti-tip device on the floor , concret e wall or timber fr aming. The surface must be flat and level. ĺ Check the base surface. ĺ Check the installation dimensions. ĺ Check the diagr ams for the building's supply lines.
Anti-tip device 74 Installation dimensions of locking bolt X Anti-tip device, front view Model Width X HR 1421 HR 1622 HR 112x HR 192x 29 15/16" (760 mm) 3 13/16" (97 mm) HR 113x HR 193x 35 .
Anti-tip device 75 1 3 2 Attaching to the floor 1 3 2 Attaching to the wall & Anti-tip device ' Screws ( Locking nut ĺ Secure the anti-tip device Ȧ t o the floor surface with suitable bearing capacity, either to the floor or wall. using four screws ȧ .
Anti-tip device 76 Complete all necessary connections for the range. Read the information in the "Electrical connection", "Gas connection" and "Plumbing" sections. The range can be damaged if it is lifted using the cover , the trim or the door handle.
Anti-tip device 77 In the r ange housing, there is an opening Ȧ for the bolt ȧ of the anti-tip device. The opening allows the r ange to be slid onto the anti-tip device and back to the wall. The locking clamp Ȩ must noticeably engage with the bolt ȧ so that anti-tip prot ection is ensured for the r ange.
Electrical connection 78 ɘ CA UTION: During installation, maintenance and repair work, the r ange must be disconnected fr om the electricity supply . It is only completely isolated from the electrici.
Electrical connection 79 Electrical connection T ype Connecting line NEMA Electrical supply HR 1421 appro x. 5' 11" (1.80 m) 120/208 V 60 Hz HR 1421 appro x. 5' 11" (1.80 m) 120/240 V 60 Hz HR 1622 HR 195x appro x. 5' 11" (1.
Electrical connection 80 This appliance must be grounded in compliance with all applicable local and natio nal regulations. Installation, repair and maint enance work should only be performed by a Mie.
Plumbing 81 Notes on connecting to the water supply Disconnect the appliance from the electrical power supply before connecting the water line. T urn off the water supply befor e connecting the water lines for the r ange.
Plumbing 82 Attach the stainless steel hose to the range. Make sure that the stainless st eel hose is not kinked or damaged. The stainless steel hose must not be shortened. ĺ Remove the cover from the wat er supply connection at the back of the r ange.
Gas connection 83 ɘ Connection to the gas supply and any switchover to a differ ent gas type may only be performed by a duly authorized gas company technician. This t echnician is responsible for pr oper function at the installation site. In Massachusetts installation must be performed by a licensed plumber/gas fitter .
Gas connection 84 The gas connection must be established only Miele-authorized specialists according t o the local and following regulations: National F uel Gas Code ANSI Z 21.1 / NFP A No. 54 for the United Stat es or the current C an / CGA B 149.1 and 2 Installation Codes of Gas Appliances for Canada.
Converting to another gas type 85 The gas connection of the r ange depends upon the model of the range. If the r ange is not configured for the pr oper type of gas connection please contact your Miele dealer . If the r ange has to be converted over t o another gas type, all jets must be ex changed.
Burner ratings 86 Burner rating of HR 1124 Gas type Btu/hr kW max max Simmer burner Natur al gas 12,500 3.70 Pr opane gas 12,500 3.70 P ower burner Natur al gas 19,500 5.70 Pr opane gas 19,500 5.70 Oven top burner Natur al gas 22,000 6.45 Pr opane gas 20,150 5.
Burner ratings 87 Burner rating of HR 1134 Gas type Btu/hr kW max max Simmer burner Natur al gas 12,500 3.70 Pr opane gas 12,500 3.70 P ower burner Natur al gas 19,500 5.70 Pr opane gas 19,500 5.70 Oven top burner Natur al gas 22,000 6.45 Pr opane gas 20,150 5.
Burner ratings 88 Burner rating of HR 1135 Gas type Btu/hr kW max max Simmer burner Natur al gas 12,500 3.70 Pr opane gas 12,500 3.70 P ower burner Natur al gas 19,500 5.70 Pr opane gas 19,500 5.70 Grill Natur al gas 19,000 5.50 Pr opane gas 15,500 4.
Burner ratings 89 Burner rating of HR 1136 Gas type Btu/hr kW max max Simmer burner Natur al gas 12,500 3.70 Pr opane gas 12,500 3.70 P ower burner Natur al gas 19,500 5.70 Pr opane gas 19,500 5.70 Griddle Natur al gas 13,000 3.80 Pr opane gas 14,300 4.
Burner ratings 90 Burner rating of HR 1934 Gas type Btu/hr kW max max Simmer burner Natur al gas 12,500 3.70 Pr opane gas 12,500 3.70 P ower burner Natur al gas 19,500 5.70 Pr opane gas 19,500 5.70 T otal output Cooktop Natur al gas 110,000 32.20 Pr opane gas 110,000 32.
Burner ratings 91 Burner rating of HR 1936 Gas type Btu/hr kW max max Simmer burner Natur al gas 12,500 3.70 Pr opane gas 12,500 3.70 P ower burner Natur al gas 19,500 5.70 Pr opane gas 19,500 5.70 Griddle Natur al gas 13,000 3.80 Pr opane gas 14,300 4.
Burner ratings 92 Burner rating of HR 1955 Gas type Btu/hr kW max max Simmer burner Natur al gas 12,500 3.70 Pr opane gas 12,500 3.70 P ower burner Natur al gas 19,500 5.70 Pr opane gas 19,500 5.70 Grill Natur al gas 19,000 5.50 Pr opane gas 15,500 4.
Caring for the envir onment 93 Disposal of the packing material The cardboar d bo x and packing materials pr otect the appliance during shipping. They have been designed to be biodegr adable and recyclable. Ensure that any plastic wr appings, bags, etc.
.
9 Independence Way Princeton, NJ 08540 Phone: Fax: www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial number of your appliance available before contacting Technical Service.
M.-Nr . 09 898 161 / 02 en–US, CA All Electric: HR1421; HR1622; All Gas: HR1124; HR1134; HR1135; HR1136; Dual F uel: HR1924; HR1934; HR1935; HR1936; HR1954; HR1955; HR1956 ħ.
Een belangrijk punt na aankoop van elk apparaat Miele 09 898 161 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Miele 09 898 161 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Miele 09 898 161 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Miele 09 898 161 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Miele 09 898 161 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Miele 09 898 161 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Miele 09 898 161 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Miele 09 898 161 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
