Gebruiksaanwijzing /service van het product 9741510 van de fabrikant Miele
Ga naar pagina of 84
Operating and Installation Instructions Coffee System To prevent accidents and appliance damage read these instructions before installation or use. M.-Nr.
IMPORTANT SAFETY INSTRUCTIONS .................................5 Guide to the coffee system .........................................1 0 Controls and display elements ......................................1 2 Accessories ..............................
Creating a user profile .............................................3 3 Accessing profiles .................................................3 3 Creating a user profile ..............................................3 3 Selecting a user profile .......
Cleaning and care ................................................4 4 Overview ........................................................4 4 Rinsing the system .................................................4 6 Milk pipework ..........................
When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Please read these instructions carefully to prevent accidents and machine damage.
Technical safety ~ Installation work and repairs must only be performed by a trained technician in accordance with national and local safety regulations. Repairs and other work by unauthorized persons could be dangerous and may void the warranty. ~ A damaged coffee system can be dangerous.
~ Never open the outer casing of the appliance. Tampering with electrical connections or components and mechanical parts is dangerous and may cause machine damage. ~ Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
~ Please note the following regarding water: – Only fill the water container with cold, fresh tap water. Hot water or other liquids can damage the coffee machine. – Change the water every day to prevent a build-up of bacteria. – Do not use mineral water.
For machines with stainless steel trim: ~ Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on the surface of the trim. These damage the surface, causing it to lose its dirt repellent protective coating. ~ The surface of the stainless steel trim is susceptible to scratching.
Front view a On/Off touch control K b Controls and display c Door grip d Hot water dispenser e Drip tray f Main dispenser (height-adjustable with lighting) g Milk container with lid Guide to the coffe.
Interior view h Ground coffee chute cover i Brew unit j Ground coffee chute k Grind control lever l Coffee bean container m Water tank with inlet n Drip tray with no-spill grid for transport o Waste u.
a On/Off touch control K Turn machine on and off b Beverage controls Preparation of . Espresso / Coffee H Cappuccino k Latte macchiato c More programs x More beverages such as lungo coffee, café latt.
Included accessories – Coffee scoop for measuring ground coffee – Milk container with lid for storing and preparing milk – Milk pipework cleaning agent for cleaning the milk system (starter kit).
Before the first use ^ The appliance must be correctly installed and connected before the first use. See the "Installation instructions". ^ Remove any protective coverings. Clean the coffee machine thoroughly (see "Cleaning and care") before filling it with water and coffee beans.
Display You can choose between the following options: – On : The date and time are always displayed even when the machine is turned off. – Off : The display will go dark as soon as the machine is turned off. – Night dimming : The date and time will be displayed between 5:00 and 23:00.
Determine water hardness You can also determine the water hardness with the supplied test strips. ^ Dip the test strip in water for about one second. Then shake off any excess water. The result will be visible after about one minute. You can now set the water hardness level for the coffee machine.
You can operate the coffee machine by tapping the touch buttons with your finger. You are in the beverages menu when the display shows: { Miele Select drink To prepare a coffee beverage, tap one of the beverage buttons. You can find more beverages in the menu "More programs" x .
, Change the water daily to prevent bacteria growth. Before using the coffee system for the first time, clean the appliance. See "Cleaning and Care". Only fill the water tank with cold, fresh tap water. Hot or warm water or other liquids can damage the coffee machine.
You can make coffee or espresso from roasted whole coffee beans that the coffee machine will grind fresh for each portion. Add fresh beans to the coffee bean container. Alternatively, you can make coffee or espresso from ground coffee (see "Coffee beverages prepared from ground coffee").
Turning on When the machine is turned on, it heats up and rinses out the pipework. This cleans and heats the pipework to ready the machine for coffee preparation. If the coffee machine still has an operating temperature higher than 140°F (60°C), rinsing will not take place.
The coffee dispensers can be raised or lowered to the height of your cup or glass. If the dispensers are closer the beverage will not cool down as quickly and the crema will have a better consistency. ^ Pull the coffee dispenser down to the same level as the rim of the cup.
Preparing espresso, coffee or lungo (large) coffee ^ Place a cup under the main spout. ^ Tap the touch key for the desired beverage: . Espresso / Coffee x in "More programs": Lungo coffee The chosen coffee beverage will now be dispensed.
Cancel preparation You can cancel preparation while "Stop" is displayed. ^ Tap the OK button. The coffee machine will cancel preparation. If two portions are selected for preparation, a single tap on the OK button will only cancel preparation of the first portion.
Filling ground coffee Use the scoop supplied with the machine to ensure the correct amount of ground coffee is used. Do not add more than one level scoop of ground coffee to the coffee chute. If too much ground coffee is filled into the chute the brew unit cannot process it.
Beverages with milk You can prepare various specialty coffee beverages with milk or Hot milk and Milk froth . The following specialty coffee options are available: Cappuccino consists of about two-thirds milk froth and one-third espresso. Latte macchiato consists of one-third each of hot milk, milk froth and espresso.
Preparing beverages with milk ^ Place a suitable cup or glass under the main dispensers. ^ Tap the touch key for the desired beverage: H Cappuccino k Latte macchiato x in "More programs": Café latte, Hot milk, Milk froth The desired beverage will be prepared.
To ensure that your coffee system is ideally adjusted to the type of coffee you use, you can use the "Parameters" , menu to change the ground amount, adjust the brewing temperature or select the "Pre-brewing" option. You can customize these settings for each beverage.
Displaying and adjusting the parameters for a beverage ^ Tap , . The , symbol is illuminated. ^ Tap the arrow buttons until the desired beverage is highlighted. Tap the OK button. The current settings for the ground amount, brewing temperature and pre-brewing for this beverage are displayed.
Pre-brewing ground coffee When the pre-brewing function is Turned on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavor of the coffee.
The flavor of a coffee beverage depends not only on the type of coffee, but also on the quantity of water used. You can adjust the amount of water used for each portion of espresso, coffee or hot water to suit your cup size and the type of coffee used.
Setting serving sizes for cappuccino and latte macchiato ^ Place a suitable cup or glass under the main dispensers. ^ Tap H or k until the display shows"Beverage size". The ingredients of the drink are now displayed and their respective quantities can be changed.
Selecting the beverage size in the "Parameter" , menu ^ Tap , . ^ Tap the arrow buttons until the desired beverage is highlighted. Tap the OK button. ^ Tap the arrow buttons until "Beverage size" is highlighted. Tap the OK button. From now on the beverage will be prepared according to the portion sizes set.
If the unit is used by several people with different coffee preferences, you can create individual user profiles. You can adjust the serving size for each coffee beverage for each profile (see "Setting the serving sizes"). The name of the current profile is shown at the top left of the display.
Selecting a user profile This selection is only possible if a profile has already been created in addition to the standard Miele profile. ^ Tap the arrow keys until "Select a user profile" is highlighted. Tap the OK button. ^ Use the arrow keys to select the profile that you want to select.
Reverting to a user profile You can customize the unit so that, after each drink prepared, it automatically reverts to the standard Miele profile or retains the most recently selected custom profile. ^ Tap the arrow keys until "Change profile" is highlighted.
The "Settings" menu allows you to customize the coffee machine for your personal needs. Accessing the "Settings" menu ^ Tap "Settings". Now you can review or change any settings. The check mark ( next to the individual entry shows you which setting is currently active.
Overview of possible settings The factory default setting for each menu item is displayed in bold . Menu item Possible settings Language German , English, additional languages Country Time Display off.
Menu item Possible settings Showroom program Demo mode( on / off ) Factory default settings Do not reset Reset Settings 38.
Language You can select your language and country for all text displayed on your machine. Tip: If you have accidentally selected the wrong language, follow the flag icon F to return to the "Language" option. Time of day You can customize the time display, the time format and the time of day.
Select timer The available options are: – Timer 1: Turn on at, Turn off at, Turn off after – Timer 2: Turn on at, Turn off at Turn on at Please note that the coffee machine will not turn on at the required time if you have activated the system lock.
To activate and deactivate the timer If the timer for "Turn on at" is activated, the + symbol and the desired turn-on time will appear on the display 23:59 hours before if the time display has been set to "On" or "Overnight shutdown".
Info (displaying information) In the menu option "Info" the number of portions prepared for each individual beverage can be displayed. You can also see whether more than 50 portions can be dispensed before the machine needs to be descaled ("Number of uses until appliance needs descaling").
Showroom program (demo mode) Do not activate this setting for domestic use. The coffee machine can be presented in the showroom or at exhibitions in "Demo mode". In this mode the machine lights up, but no drinks are prepared or actions carried out.
Overview , The coffee machine must be cleaned regularly to prevent a build-up of bacteria. Recommended frequency What needs to be cleaned/maintained? Daily (at the end of the day) Milk container and l.
Danger of burns! Let the unit cool down before you clean it, especially the water in the drip tray. Do NOT use a steam cleaner to clean this unit. Doing so will damage the unit. Never use cleaning products that contain sand, cleaning soda, acids, or chlorides! They will corrode the surface.
Rinsing the system When a coffee drink has been prepared, the coffee machine also rinses itself before turning off. This removes any remaining coffee residue. You can also manually rinse the system. ^ Tap x . ^ Tap the arrow key Y until "Maintenance" is highlighted.
Cleaning the milk pipework using the milk line cleaner Make sure that the milk lines are cleaned regularly and thoroughly. Milk contains natural bacteria that will grow when the lines are not sufficiently cleaned. Contamination in the unit can be a health risk.
^ Fill the water tank with lukewarm water up to the mark 8 and stir the solution. Please note the mixing ratio. It is important that you fill the water container with enough water. Otherwise, the cleaning process is incomplete. ^ Reinsert the water tank and close the unit door.
Main dispenser Clean the stainless steel cover of the main dispenser by hand only , using warm water and some dishwashing liquid. All other components are dishwasher safe. ^ Pull the main dispenser all the way down a and pull the cover forward to remove b .
^ Clean the surface of the main dispenser with a damp sponge cloth. ^ Now reassemble the dispensing unit in reverse order. Make sure that the upper connecting piece a audibly clicks into place. Push firmly when inserting the dispensing nozzles b into the dispensing unit.
Water tank Change the water every day to prevent a build-up of bacteria. Make sure that the valve, the underside of the water tank and the surface the water tank sits on are clean. Otherwise the water tank will not sit correctly. ^ The water tank can be cleaned in the dishwasher or by hand using warm water and liquid dish soap.
Drip tray Clean the drip tray daily to prevent odors and mold. The coffee machine will show a message on the display when the drip tray is full and needs to be emptied. At this point at the latest, the drip tray must be emptied. Danger of burns! If the coffee machine has just been rinsed, wait a while before removing the drip tray.
Drip tray cover ^ Remove the drip tray cover. ^ The drip tray cover can be cleaned in the dishwasher or by hand using warm water and liquid dish soap. ^ Dry the drip tray cover thoroughly. ^ Replace the cover onto the drip tray. Make sure that the front of the cover is flush with the drip tray.
Interior and unit door ^ Clean the interior and the unit door with warm water and liquid dish soap once all removable parts have been removed. Tip: Use a vacuum cleaner to remove dry ground coffee residue. In the lower part of the inside door there is a drip catcher.
^ Carefully pull the brew unit out of the coffee machine. If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see "Frequently asked questions"). When the brew unit has been pulled out, do not alter the position of the brew unit handle.
Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Use the cleaning tablets supplied to clean the brew unit. These cleaning tablets have been specially formulated for use in the coffee machine to optimize degreasing.
Exterior The surfaces can become discolored or otherwise altered if soiling is not cleaned promptly. Remove any soiling immediately. Make sure no water can penetrate the display! All external surfaces are susceptible to scratching. On glass surfaces, scratches can lead to breakage.
Limescale builds up in the coffee machine during use. The limescale buildup in the machine will depend on the hardness of your local water supply. Limescale must be removed regularly. The machine will guide you through the descaling process. Various instructions will appear on the display, e.
^ Fill the water tank to the mark with lukewarm water. ^ Add two descaling tablets to the water. Please note the mixing ratio for the descaling tablets. It is important that you fill the water container with enough water. Too little water can cause the descaling program to be stopped prematurely.
, Repairs to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.
Fault Possible cause and solution Fault 73 or "Check the brew unit" ^ The brew unit cannot reset to the correct position or it is clogged and the ground coffee cannot be processed. ^ Check if you can remove the brew unit (see "Cleaning and care – Brew unit").
Fault Possible cause and solution "Too much ground coffee" There is too much ground coffee in the ground coffee chute. If more than one level scoop is put into the ground coffee chute the brew unit cannot process it. The ground coffee will be directed into the waste container, and a fault will appear in the display.
Unusual performance of the coffee machine Fault Possible cause and solution The light does not illuminate when the coffee machine is turned on. The lighting has been turned off. ^ Turn on the lighting (see "Settings – Lighting"). The lighting is defective.
Fault Possible cause and solution The touch keys do not respond. The coffee machine can no longer be operated. An internal fault has occurred. ^ Open the unit door. The current process is stopped. ^ Disconnect the power supply by unplugging the machine's power cord.
Fault Possible cause and solution No milk or milk froth is coming out of the main dispenser. The milk pipework or the air intake hose is clogged. ^ Follow the instructions in "Cleaning clogged milk pipework". The display shows the message "Fill and insert milk container" although the milk container is full and in place.
Unsatisfactory result Fault Possible cause and solution The consistency of the milk froth is unsatisfactory. The milk temperature is too high. Good milk froth can only be prepared with cold milk (under 55°F/13 °C). ^ Check the milk temperature in the milk container.
Fault Possible cause and solution The crema on the coffee or espresso is not right. The grind level is too coarse or too fine. ^ Set the grinder control to a coarser or finer setting (see "Adjusting the grinder setting"). The brewing temperature is too high for the type of coffee being used.
If the quality of the milk froth is unsatisfactory, the air intake hose may be clogged. Follow the instructions in "Step 2: Clean air intake hose and angled section in the door". If no milk comes out of the main dispenser, only steam , please follow the instructions in Step 1 through 4.
To reassemble the lid: ^ First insert the gasket in the lid. Then insert the milk intake pipe into the gasket. Make sure not to slide the beveled end of the milk intake hose into the gasket. Step 2: Cleaning the air intake hose and angle section in the door Do not use a needle or similar sharp item.
^ Slide the hoses back onto the angle section and reinsert it. Make sure that the bridge on the angled section faces down. ^ Reinsert the air intake hose into the opening c . Step 3: Cleaning the milk pipework in the main dispenser ^ Remove and disassemble the dispensing unit as described in "Cleaning and care – Main dispenser".
In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the contact information on the back of this booklet. When contacting the Technical Service Department, please quote the model and serial number of your appliance given on the data plate inside the appliance.
72.
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. The installation steps are described in the enclosed "Installation Diagram".
Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
Make sure that the power to the machine is OFF before installing or performing maintenance or repairs. All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous.
Installation and combination options The unit is designed to be built into cabinetry. Installation 76.
A combination with other built-in Miele appliances is possible. For combination installations, it is very important to install the unit with a protective base between the appliance and the unit (exception: installation with a built-in plate warmer).
Ventilation When installing the coffee machine, make sure that the back of the unit is sufficiently ventilated so that steam and hot air can freely escape. The ventilation openings in the surrounding cabinets and the space below the ceiling must be at least 78 3/4"² (200 cm²).
Tip: A place to set down the coffee machine at the level of the installation recess is helpful. It makes connecting the unit easier. ^ Unscrew the four feet on the underside of the unit by about 1/16" (2 mm) using the larger Allen wrench. The feet can be unscrewed by up to 3/8" (10 mm).
Adjusting the door hinges If the door cannot be opened or closed easily after installation, you will have to align the door (TX 20): ^ To adjust the door flush with the front of the cabinet, turn the screw a . ^ To adjust the door horizontally and vertically, turn the screw b .
81.
82.
83 9 Independence Way Princeton, NJ 08540 Phone: Fax: www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial number of your appliance available before contacting Technical Service.
M.-Nr. 09 741 510 / 02 en - US, CA CVA 6401.
Een belangrijk punt na aankoop van elk apparaat Miele 9741510 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Miele 9741510 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Miele 9741510 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Miele 9741510 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Miele 9741510 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Miele 9741510 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Miele 9741510 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Miele 9741510 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
