Gebruiksaanwijzing /service van het product DG 5060 van de fabrikant Miele
Ga naar pagina of 60
Operating and Installation instructions Steam oven DG 5050 DG 5060 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.
Warning and Safety instructions .....................................5 Caring for the environment .........................................1 0 Guide to the appliance ............................................1 1 Front view ..........................
During operation ..................................................2 7 Interrupting operation ............................................2 7 Changing the temperature ........................................2 7 Changing the duration ..................
Optional accessories ..............................................4 7 Cooking containers ................................................4 7 Cleaning and care products .........................................4 9 Safety instructions for installation .
This steam oven conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the steam oven, please read these instructions carefully before installation and before using it for the first time.
Safety with children ~ Activate the safety lock to ensure that children cannot switch on the appliance inadvertently. ~ Keep children away from the steam oven at all times. It is not a toy! To avoid the risk of injury do not allow them to play with it or to play with the controls.
~ This appliance is supplied with a moulded plug ready for connection to a switched socket. If you wish to connect it to a double-pole fused spur connection unit, or to an isolator switch or if the ap.
Correct use ~ For added protection, it is advisable to use heat-resistant pot holders or gloves when using the appliance. Do not let them get damp or wet, as this causes heat to transfer through the material more quickly with the risk of scalding or burning yourself.
~ When using an electric socket near the steam oven, care should be taken that the cable of the appliance cannot get trapped by the steam oven door. The insulation on the cable could become damaged, giving rise to an electric shock hazard. ~ Do not place heavy objects on the open door.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
Front view a Control panel b Ventilation outlet c Door seal d Steam channel e Compartment for water container f Water container (with insert) g Contact point for water container h Shelf levels i Steam.
Accessories supplied The accessories supplied with your appliance as well as a range of optional ones are available to order from Miele (see "Optional accessories"). Condensate tray To catch excess moisture Gastronorm size GN 2/3 325x350x40 mm (WxDxH) DGGL 8 1 perforated cooking container gross capacity 2.
Descaling tablets For descaling the water container. Miele steam oven cookbook A selection of the best recipes from the Miele test kitchen. Guide to the appliance 13.
Control panel a Function selector b Temperature selector c Display d Sensors Guide to the appliance 14.
Controls Function selector You select the function you want by turning the function selector (see "Operation / Functions"). Temperature selector You can use the temperature selector to alter.
Display The following symbols will appear in the display in addition to the text: Symbol Meaning - e A maximum of 2 options can be shown in the display. These arrows indicate if more than two options are available. - - - A dotted line will appear under the last option available.
Condensate tray When you are using perforated containers, place the condensate tray on the floor of the appliance to collect any drops of liquid and allow them to be removed easily. Water container The maximum water level is 1.2 litres, the minimum 0.
Heating-up phase During the heating-up phase the oven compartment is heated to the set temperature. The display will show the temperature of the cooking compartment as it rises. The duration of the heating-up phase will depend on the quantity and the temperature of the food.
Setting up the appliance for using for the first time The appliance will switch on automatically when it is connected to the electricity supply. Welcome screen A welcome screen will appear in the display and you will then be requested to select some basic settings which are needed to set up the appliance up for using for the first time.
Clock format The request to select a Clock format will appear. The default setting for the clock is 24 h. ^ Touch the ; or ? sensor until the clock format you want appears highlighted in the display. Confirm with "OK". Setting the time of day You will then be requested to enter the Time of day.
Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this booklet.
Setting the correct boiling point for water The boiling point for water at a high altitude above sea level will be lower than the boiling point for water at sea level.
Functions Please refer to the "User instructions" booklet supplied with your appliance for more information on the following functions as well as tips on how to use your steam oven.
Preparing the appliance for use ^ Fill the water container with mains tap water up to at least the "min" marker. You do not need to remove the insert. Only use mains tap water . Never use distilled or mineral water or other liquids. ^ Push the water container into the appliance until it connects.
Setting a cooking duration ^ Set the cooking duration you want by touching ; (from 0:00 upwards) or ? (from 9:59 downwards), e.g. 20 minutes. Cook universal 100 °C 0:20 h : min Confirm your selection by touching "OK". The appliance will start automatically after the duration has been confirmed.
After use ^ Remove the condensate tray and empty it. ^ Remove the water container by pushing it upwards slightly as you take it out of the appliance. Empty it. ^ After each use, clean and dry the whole appliance as described in "Cleaning and care".
During operation Interrupting operation Operation is interrupted as soon as the door is opened. The heating will be switched off and the cooking duration remaining stored in memory. Steam will escape when the door is opened. Step back from the steam oven and wait until the steam has dissipated.
Changing the duration You can alter the cooking duration at any time during operation. ^ Touch ; or ? . Cook universal Duration * Back # 6:00 min. + ^ Confirm with "OK". T Duration 0:05 h : min : (0:00 - 9:59 h) ^ Use the ; or ? sensors to enter the duration you require.
Start time You can delay the start of a programme. The oven will then switch on automatically. It is only possible to delay the start within 60 seconds after making an entry. This function cannot be used if the temperature in the oven is above 40 °C, e.
Minute minder The minute minder can be used to time any activity in the kitchen, e.g. boiling eggs. You can also use the minute minder when a programme is running, e.g. as a reminder to stir a dish or add seasoning etc. You can set a time for the minute minder of between 1 second (0:00:01 h:min:sec) and 9 hours 59 minutes (9:59:00 h:min:sec).
Pre-heat Your appliance has a pre-heating function. This heats the oven interior to approx. 40 °C. The heating-up time is then shorter as the oven interior is pre-heated and therefore the cooking process takes less time. The appliance is delivered with the pre-heating function deactivated.
System lock The system lock prevents the appliance being switched on unintentionally, by children for example. The appliance is delivered with the system lock deactivated (factory default setting). If you wish to use it you will need to alter the setting (see "Settings / Safety").
Some of the standard steam oven settings (factory default settings) have an alternative which you can select if required. You can alter several settings one after the other. ^ Turn the function selector to the Settings menu. ^ Select the sub menu you want.
Pre-heat This function can be activated or deactivated. Recommended temperatures If you frequently change a recommended temperature it may be a good idea to change it permanently. You can change the temperatures within the permitted range. Water hardness The steam oven is set at the factory to water hardness setting IV (Very hard 4).
Safety Once the setting under "System lock" has been changed to "On", the appliance cannot be operated. Temperature format You can choose for the temperature to be shown in °C or °F. Showroom programme This programme is for dealers who want to demonstrate the appliance without the heating working.
Miele offer a range of branded cleaning and conditioning products. See “Optional accessories”. General notes Disconnect the appliance from the electricity supply and allow it to cool down to a safe temperature before cleaning. It should be cleaned after each use.
Appliance front Remove any soiling immediately. If not, it might become impossible to remove and could cause the surface to alter or discolour. Clean the front using a damp Miele microfibre E-cloth or with a clean sponge and a solution of hot water and washing-up liquid.
Oven interior Dry the oven interior, oven interior roof, door seal, drip channel, inside of the door and the compartment for the water container after each use. Use a sponge or absorbent cloth to wipe off the condensate which has built up in the compartment.
Water container Remove, empty and dry the water container after each use. ^ Release the insert by pushing the catches on the sides in towards each other and the pull it out of the container. ^ After cleaning, dry both parts of the insert thoroughly before replacing it in the water container.
Coupling seal If the water container becomes difficult to remove and replace or the fault message F20 appears, rub a small amount of the silicone grease supplied (see "Guide to the appliance / Accessories supplied") into the inside of the coupling seal.
Descaling For optimum cleaning results we recommend that you use Miele descaling tablets to descale your steam combi oven (see "Optional accessories"). A proprietary citric acid based descaling agent can also be used. Follow the manufacturer's instructions on the packaging.
^ Remove the water container and empty it. Remove the insert. ^ Rinse the water container and the insert thoroughly. ^ Replace the insert and fill the water container with 1 litre of fresh tap water. Push the water container into the appliance until it connects.
Removing and refitting the door It is much easier to clean the steam oven interior if you remove the door first. To remove the door ^ Open the door fully. ^ Flip up the release levers in front of the door hinges. ^ Slowly close the door until the raised levers are touching the frame.
, Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). Repairs and other work by unqualified persons could be dangerous.
... the water container has become harder to put into the appliance and take out again. Lightly lubricate the coupling seal on the water container with silicone grease, as described in "Cleaning and care / Coupling seal". ... the heating-up phase lasts an unusually long time.
... a whistling sound is heard when the appliance is switched on again. When the door is closed, the pressure has to equalise, which can cause a whistling sound. This is not a fault. ... F and a number appear in the display. This combination indicates a fault.
Miele offers a range of useful accessories designed for your appliance. These can be ordered via the internet at www.miele-shop.com or from Miele (see back cover for contact details) or from your Miele dealer. Cooking containers Each stainless steel cooking container has a Gastro-Norm (GN) size (Example GN 1/3).
DGG 3 Solid cooking container, GN 1/2 Gross capacity 4.0 litres / Usable capacity 3.1 litres 325x265x65 mm (WxDxH) DGGL 4 Perforated cooking container, GN 1/2 Gross capacity 4.0 litres / Usable capacity 3.1 litres 325x265x65 mm (WxDxH) DGGL 5 Perforated cooking container, GN 1/3 Gross capacity 2.
DGD Lid for GN 1/3 cooking containers Condensate tray To catch excess moisture, GN 2/3 325x350x40 mm (WxDxH) Rack For placing your own cooking containers on Cleaning and care products Miele branded cleaning and conditioning products are available for your appliance.
Ceramic and stainless steel hob cleaner 250 ml Removes discolouration from the floor heater caused by drops of liquid. Removes discolouration from cooking containers. E-Cloth (microfibre cloth) Removes finger marks and light soiling. Silicone grease For lubricating the coupling seal.
~ Before connecting the appliance, make sure that the connection data on the data plate (voltage and connected load) match the mains electricity supply. This data must correspond in order to avoid the risk of damage to the appliance. Consult a qualified electrician if in any doubt.
Installation in a tall unit * Appliances with glass front ** Appliances with metal front a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket.
Installation in a base unit * Appliances with glass front ** Appliances with metal front a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket. Important: Do not position behind the appliance! e Mains connection cable N.
Installation in a tall unit in combination with an oven * Appliances with glass front ** Appliances with metal front a Steam oven b Building-in recess c Inlet for mains connection cable to the appliance d Recommended position for electrical socket.
^ Push the appliance into the recess and align it. ^ Secure the appliance by screwing the two wood screws 3 . 5x2 5m m i (supplied) into the vertical trim on either side of the appliance (see illustration).
All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
Important U.K. This appliance is supplied for connection to a single phase 230-240 V 50 Hz supply with a 3-core cable. The wires in the mains lead are coloured in accordance with the following code: G.
In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact: – Your Miele dealer, or – the Miele Customer Contact Centre (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service.
59.
Alteration rights reserved / 0508 M.-Nr. 07 207 610 / 01.
Een belangrijk punt na aankoop van elk apparaat Miele DG 5060 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Miele DG 5060 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Miele DG 5060 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Miele DG 5060 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Miele DG 5060 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Miele DG 5060 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Miele DG 5060 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Miele DG 5060 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
