Gebruiksaanwijzing /service van het product NOVOTRONIC T 7634 van de fabrikant Miele
Ga naar pagina of 52
Operating Instructions Vented dryer T 7634 To avoid the risk of personal injury or damage to the appliance, it is essential that you read these operating instructions before installation and use. This maschine is not approved for use in the United States.
Disposal of packing material The packing materials protect the dryer from damage during transport. They have been selected for environmental compatibility and efficient disposal and can therefore be recycled. To prevent suffocation, ensure that any plastic wrappings, bags, etc.
Caring for the environment ..........................................2 IMPORTANT SAFETY INSTRUCTIONS .................................5 Operating the dryer ................................................8 Control panel ...............................
Installation and connection ........................................3 0 Front view ........................................................3 0 Rear view ........................................................3 1 Installation site ....................
, This machine T 7634 meets all CSA requirements. This machine is not approved for use in the United States. , WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: ~ It is essential to read all instructions before using the appliance.
– items that have been previously cleaned, washed, soaked or spotted with gasoline, dry-cleaning solvents or other flammable or explosive substances.
~ The dryer should not be operated without a vent duct. ~ It should not be connected to a chimney used for other purposes. ~ Do not place the dryer in a room where there is a risk of frost occurring. Temperatures around freezing affect dryer performance.
Control panel a Display b Delay button This button has a dual function: - Selecting the duration of the Timed cold and Timed warm programs. - Pre-selection of start time. c Buzzer button The end of the program is signaled audibly. d Fault indicator / Optical interface Description: See "Problem solving / Customer service" section.
Display The following functions are selected from the display: – Delay – Selecting duration of timed programs. – Programmable functions. The display also shows: – Program duration. – Program stage: Drying Cooling down End . – Test and fault messages.
Care symbols Drying q Normal/higher temperature r reduced temperature: select Gentle (for delicate fabrics) s Not suitable for dryer Ironing and rotary ironing I very hot H hot G not very hot J Do not iron/rotary iron Drying tips – Always check the weight recommendation for maximum loads as listed in the "Program Overview" section.
– Wrinkling increases with larger loads. This especially occurs with very fine fabrics as used in shirts and blouses. To limit wrinkling the dryer performs the following actions: 1. Tumble drying with drum reversal (prevents roll-ups of laundry, creasing and uneven drying), 2.
Brief instructions The operating steps identified with numbers( A , B , C , ...) may be used as short-cut instructions. A Preparing the laundry Loosen the washed garments and sort them by: . . . . . desired drying level, . . . type of fabric and finish, .
D Select program ^ Select the desired program. The indicator light for the program selected lights up. Other indicator lights for drying levels or extras may be lit, and drying times displayed.
F Starting the program The Start/Stop button flashes during program selection. This means that a program can be started. ^ Press the Start/Stop button. The Start/Stop button lights. Drying appears in the display and the time remaining is counted down.
Gentle Delicate fabrics (with the r symbol on the care label, such as acrylics) must be dried at lower temperatures for longer durations. On some programs Gentle is permanently set and cannot be deselected. Buzzer At the end of the program a buzzer sounds at intervals, for a maximum of 1 hour.
Normal Extra dry, Normal Fabrics Single- and multi-layered cotton such as: hand towels, T-shirts, baby clothes. Note – Select Extra dry for multi-layered and extra thick fabrics. – Do not use Extra dry to dry jersey fabrics like T-shirts and baby clothes - they may shrink.
Woolens Fabrics Woolens. Note – Remove items immediately after the end of the program while still slightly damp. Allow items to air dry. Gentle Unavailable. Smoothing Fabrics – Cotton or linen fabrics. – Synthetics, cotton or blends. For example: cotton trousers, jackets, shirts.
Timed cold Fabrics – Any fabric needing airing. Timed warm Fabrics – Additional drying of multi-layered garments which dry unevenly owing to their design: e.g., jackets, pillows and voluminous fabrics. – Drying individual laundry items: e.g. bath towels, bathing suits, dish cloths.
Switching over from a running program As a protection against unintentional changes, program selection is no longer possible. To be able to choose a new program, you must cancel the current program. - Canceling and selecting a new program ^ Press the Start/Stop button.
The lock function protects your dryer against unauthorized use. You can activate this function whenever you wish. It locks the dryer's electronics. It can be turned on, but no program can be started. – In such a case, the Gentle indicator light flashes and a key symbol 0-§ appears in the display.
Cleaning door lint filter The lint screen in the door casing collects lint generated by the drying process. Clean it after every drying*. * Also check the lint screen when the Filter/Vent indicator light comes on. Cleaning the lint screen without water Tip: You can dispose of the lint without touching it by using a vacuum cleaner.
Cleaning port-hole grilles Periodically clean the screens in the door opening as well as the air passage underneath the screens. ^ Turn the left and right screen knobs a (until you hear them click). ^ Grasping the knobs, pull the lint screens out towards the center b .
What to do, i f...? You can remedy most problems yourself. In many cases you can save time and expense, since you will not have to call in customer service. The following tips should help you locate and remedy the cause of a problem. Please note the following: , Repairs to electrical appliances should only be carried out by qualified professionals.
Problem Cause Solution Filter/Vent indicator light goes on. The indicator light shows that the dryer is not operating at its most efficient or economical. Possible causes: Blockage by lint or detergent residues. – As a rule, it is sufficient to clean the lint screens.
Other faults Problem Cause Solution The drying process goes on too long or even switches off. Even after the lint screen is cleaned, the Filter/Vent indicator come on. Please check all possible causes and switch the dryer off and then on again. Insufficient ventilation, perhaps because the installation space is too small.
Problem Cause Solution Synthetic-fiber laundry items are statically charged after drying. Synthetics have a tendency to static discharges. Using a fabric softener in the last rinse cycle can reduce static charge when drying. There has been a lint buildup.
Problem Cause Solution The Dress shirts, Denim/Jeans, and Timed cold programs will not start and the indicator lights for these programs do not come on. The cause is not imme - diately obvious. – Switch the dryer off and then on again. – Select one of the programs.
Replacing the light bulb Disconnect the dryer from the electrical supply. ^ Open the door. The hinged cover for the lighting is over the port-hole. ^ Gently insert an ordinary tool* under the side of the cover. * such as a wide slot-type screwdriver ^ Open the cover by pressing lightly while rotating your wrist.
Repairs For faults you cannot correct yourself, please contact: – the Miele Factory Repair Service. The telephone number for the Factory Repair Service is listed at the back of these operating instructions. When contacting the Miele Service Department, you will need to quote the model and serial number of your appliance.
Front view a Venting connection: The dryer vent duct can be connected to the rear of the machine (as supplied) or on either the right or left side. b Power cord c Control panel d Door e Four height-ad.
Rear view a Handgrips under the cover overhang for moving the appliance (arrows) b Power cord c Rear venting connection Installation site This dryer can be accommodated under a worktop if there is sufficient height. , Do not install the dryer in a location where its door could conflict with room doors.
Leveling the dryer To ensure trouble-free operation, the dryer must be perfectly level. ^ Compensate for floor irregularities by turning the threaded feet in or out. , Ensure that is an air gap of at least 10 mm between the underside of the dryer and the floor.
Electrical connections GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug.
General Important The dryer should only be operated when the moist air produced by drying is ducted to the outside, by means of: . . ...a flexible venting house, or piping connected to the dryer, or ...a direct connection to a through-wall pipe. – The appliance should not be electrically connected while the venting is being installed.
Calculating total duct length Each of bends and differing components of the dryer's venting creates its own frictional resistance to the flow of the exhaust air.
Calculation example A Wall pipe, with grill insert = 1 x 3.8 m Comparative duct length = 3.8 m B/D 2 elbows, 90° = 2 x 0.8 m Comparative duct length = 1.6 m C 0.5 m plastic piping =0 . 5x1m Comparative duct length = 0.5 m E Left side vent opening = 1 m Comparative duct length = 1.
Overview of vent systems On this and the following pages you will find descriptions of four venting systems ( a b c d ) that can be installed on the dryer. a Flexible metal duct hose Using the adapter provided, you can easily install a vending duct house (diameter 100 mm).
Examples: Window vent 1. Window vent kit (fitted in plexiglass pane) 2. Adapter for flexible vent hose Connection to exhaust flue 1. Pipe with connector 2.
b Dryer vent systems from metal piping Smooth piping makes sense where the vented air has to be carried a considerable distance. A pipe offers less resistance to the discharge air than does, for instance, a flexible ventilation duct. Time and energy consumption improve with smooth piping.
c Connecting directly to a wall vent If you can place the dryer directly against the external wall of the room, this vent configuration is advantageous. The short overall pipe length has a beneficial effect on time and energy consumption. However, you must make an opening in the wall to install the wall kit.
d Vent collector duct To prevent condensed water buildup in the non-operating dryers: ^ For each dryer, install a non-return flap R directly on the collector duct. You will need an optional Miele accessory* (see right) for this. When installing from 3 to a maximum of 5 dryers, the pipe diameter D must be enlarged.
Washer-dryer stack WTV 412 Stacking unit* without worktop: A = 94.2 cm B = 170 cm * Miele accessory available on order Installing the dryer vent 42.
Height 850 mm Width 595 mm Depth 634 mm Depth with door open 1,074 mm Can be pushed under a worktop – Height – Width Yes 850 mm 600 mm Suitable for stacking Yes Weight 46 kg Drum Volume 111 liters.
Programmable functions for changing standard values As needed, you can use programmable functions to adapt the dryer electronics to changing requirements.
Extending the range of drying levels You can extend the range of the drying levels for many of the programs: Rotary iron+ (dryer than Rotary Iron). Hand iron+ (dryer than Hand iron). Normal + (dryer than Normal). Additionally, the Extra dry level can be selected for the Mixed and Denim Jeans programs.
Adjusting buzzer volume The buzzer has two volumes. For programming and saving in memory, follow steps A to E . This function is programmed using the buttons. Precondition: – The dryer is switched off. – The door is closed. A Press Start/Stop and keep it pressed it during steps B - C .
Set memory function The electronics memorizes any selected program with extra options. The duration of a Smoothing program will also be stored in memory. These settings will be used for the next drying. They can be accepted, or changed by using the buttons.
Extending cooldown time You can individually lengthen the cooldown phase the occurs before the end of a program. Fabrics will be more completely cooled down. Cooldown time – can be extended by two stages. – it does not function for Smoothing programme.
Change function of Filter/Vent indication Lint should be removed after drying. At the same time, the Filter/Vent indicator light reminds you to do so as soon as a certain degree of lint has accumulated. You can yourself decide which degree of lint accumulation will trigger that reminder.
Adjust keypad tone An audible tone sounds every time a button is pressed. For programming and saving in memory, follow steps A to E . The programmable function is programmed using the buttons. Precondition: – The dryer is switched off. – The door is closed.
Changing water conductivity setting , This programmable function should be adjusted only when residual water content is erroneously determined owing to the extreme softness of the water. Important condition The water in which fabrics are washed may be extremely soft with a conductivity value less than 150 μS/cm.
M.-Nr. 07 323 240 / 01 Alteration rights reserved/ 2009.
Een belangrijk punt na aankoop van elk apparaat Miele NOVOTRONIC T 7634 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Miele NOVOTRONIC T 7634 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Miele NOVOTRONIC T 7634 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Miele NOVOTRONIC T 7634 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Miele NOVOTRONIC T 7634 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Miele NOVOTRONIC T 7634 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Miele NOVOTRONIC T 7634 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Miele NOVOTRONIC T 7634 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
